used Candle filters for sale

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A.. The machine, designed for machining workpieces with a maximum length of 1500 mm, is distinguished by the use of many state-of-the-art technical solutions. It thus meets all, even the most intensive challenges of modern business. The ADIRA BB3515 CNC press brake is equipped with a powerful electric drive , developed in Bluedrive technology. Compared to a standard hydraulic system, this drive is free of filters, seals and hydraulic oil. As a result, the machine is much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. Furthermore, ADIRA’s patented HEXA-C design concept minimis ...

Advantages of Aflatek 3in1 10A: -7.5kW electrical motor. -Integrated 150l air tank. -Air and oil filters as well as oil separator already included. -Low noise and vibrations level. -Compact, vertical design. -Integrated air dryer. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 7.5 Motor speed, rpm: 2950 Drive type: Direct drive Motor protection: IP 54 Air supply at 8 bars, L/min: 1100 Air tank, L: 150 Dimensions (length x width x height), mm: 1400x700x1380 Weight, kg: 310 Shipping details: Packaging: Plywood box on a pallet Dimensions (length x width x height), mm: 1500x800x1500 Weight, kg: 340 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Screw compressor with integrated 300l air tank, air dryer and all of the needed filters. Advantages of Aflatek 3in1 20A: 15kW electrical motor. Integrated 300l air tank. Air and oil filters as well as oil separator already included. Low noise and vibrations level. Compact, vertical design. Integrated air dryer. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 15 Drive type: Direct drive Motor protection: IP 54 Air supply at 8 bars, L/min: 2300 Air tank, L: 300 Dimensions(length x width x height), mm: 1400x750x1500 Weight, kg: 430 Shipping details: Packaging: Plywood box on a pallet Dimensions (length x width x height), mm: 1500x900x1600 Weight, kg: 450 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek 3in1 7.5A: -5.5kW electrical motor. -Integrated 150l air tank. -Air and oil filters as well as oil separator already included. -Low noise and vibrations level. -Compact, vertical design. -Integrated air dryer. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 5.5 Drive type: Direct drive Motor protection: IP 54 Air supply at 8 bars, L/min: 500 Air tank, L: 150 Dimensions(length x width x height), mm: 1400x700x1380 Weight, kg: 310 Shipping details: Packaging: Plywood box on a pallet Dimensions (length x width x height), mm: 1500x800x1500 Weight, kg: 340 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

For sale we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and has 4657Bh. technical data: combined laser/turret punching press EML Z-3610 NT, Y.O.M. 11/2014, 45 tool stations, laser power 4 kW, operating hours: laser/resonator hours: 4657h, control type: AMNC-F, with resonator unit Amada/Fanuc AF 4000i-C, fabrication no. L14x40295, refrigeration & refrigeration unit, flue gas and laser dust filter system Herding MP2 -) right-sided automatic plate magazine LKI AS III MP, Y.O.M. 2015, machine weight approx. 12,000 kg -) left-sided vacuum acceptance & stacking device / single sorting PR 3 300 L 2P, Y.O.M. 2013, power consumption 8.5 kW, weight approx. 4,800 kg Basic installation approx. 20 x 10 m, total H (magazine) approx. 6 m The price is only valid for the machine, without dismantling, transport and commissioning. If you have any  ...

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

Microbiological protection and PCR cabinet with vertical air flow General characteristics Vertical hood with laminar flow, Class 100 is used for handling different samples in a sterile environment without turbulence and without impurities in the working room. Protects the work area both against microorganisms and other air contaminants, chemically toxic vapors and unpleasant odors, .. etc. Automatic electronic monitoring system controls all functions and all safety alarms of the system according to EU norms offers many working possibilities: 1) Overpressure system: part of the sterile air is evacuated through the front opening. 2) Pressure lowering system: part of the filtered air is evacuated while the outside air is partially brought inside creating a protective barrier without affecting the laminar flow. Protection of personnel and the environment, but can also be used for work ...

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air r ...

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air r ...

ATMA ATMACE 710/G screen printing machine was manufactured in 2012 in Taiwan by ATMA CHAMP ENT. CORP. The machine is used for precision printing of medium-sized items, i.e. posters, car stickers and advertisements, on both rigid and flexible flat substrates. The sliding vacuum table made of aluminium alloy with high resistance offers a large working area. Quick replacement and positioning of the screen frame, on the other hand, is ensured by a special gripper, equipped with a micro screen adjustment and pneumatic lock. The ATMACE 710/G screen printing machine can also be integrated into production lines to increase productivity. The total weight of the machine is 1290 kg. The offer also includes the AERORTERM ULTRATERM UV 1100/3000 drying tunnel, manufactured in 2009 by the Czech company AEROTERM a.s.. The machine, designed for curing UV inks and varnishes, is equipped with one row of ...

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls wit ...

Bottling line BARDI – 19LT PET Speed: 450 bph. PREFORMS tipper GENIUS – 2007. Blowing machine SIAPI (1 cavity) – 2007: Nr. 3 moulds: 10 LT – 15 LT – 18.9 LT. Filling monoblock BARDI – 2007. 3 bells for filters – PALL. Robot with interlayer and pallet magazine ACMI – 2010. Label marker and applicator for pallets VIDEOJET – 2016. Compressor 40 bar SIAD – 2007. Air tank 40 bar MTA – 2007. Dryer MTA – 2007. Chiller PIOVAN – 2007. Evaporation tower B.A.C. Bottle conveyor belts included. Various spare parts available.

BMG Polarstar Optima and Fluostar Optima Multimode Microplate Reader Up to 384 wells Fliter wheel 8 Excitation Filter wheel 8 emission Fluorescence intesity -time resolved fluorescence -Absorbance and luminicence POLASRSTAR Fluorescense polarization mode linear and orbital shaking Fluorescence 240-740 nm Absorbance 240-740 nm Fluorescence polarization 380-740 nm Additional 12 more filters

BOFA's Advantage 350 suction and filter system effectively removes potential harmful vapours and particulate matter produced during the laser marking process arise. By maintaining a dust-free operating range, the System to protect valuable devices, a labeling of continuously higher To achieve quality, reduce scrap rates and reduce pollutants. The low-noise and compact Advantage 350 system is ideal for use light laser marking applications in schools, among others, Sign workshops and small industry.

BRAIBANTI production line for pasta Long cut Refurbished 2023, complete control NEW Output: 3000 kg/hour Equipment: Press Pre-Dryer Divider Dryer Cool Humidifier Cutting Unit Feeding elevator for packing section Electric Control System and control panel with all inside cabling of system Dry Pasta Storage section- -8 hours capacity Vacuum Pumping system (NEW) Raw material feeding system (Rotoflow) with air transfer (Blower) (NEW) Hot water system with piping between line (NEW) Chiller system for cold water (NEW) The washing machine (NEW) Pasta die and filters (with new inserts) 2 x Packaging system (110 packs/minute) (NEW) Laboratory (Pasta grinder and Pasta moisture analyzer) (NEW) Compressed air system (NEW) Water filtering and softening system (NEW) Needed minimum building dimension: Length 4800 cm x Width 800 cm x Height 800 cm. Shall have changes according t ...

Water softeners /-filters, water descaler, water filter system for different application areas in the hospitality industry from the following manufacturers in stock: -Brita Professional (ID4761) -2 x Brita professional, model: aquaQUELL PURITY 1200, Ø300x550mm, (ID3943) -Water softening plant of AW, electronically controlled without cartridge (ID1507) - Lambro/Idrodepurazione, model: Cabinato LT 8 DM, (ID2250) -4 x Kehl Wassertechnik, model: AQ2 (ID3944) Applications: coffee machines, vending machines, Combi ovens, ovens/convection and washing Center

BYSTRONIC BySprint 3015 laser cutting machine was built in 2006 in Switzerland. Designed for even the most intensive machining, the machine uses an extremely stable 3 kW laser beam, whose excellent parameters ensure the highest energy efficiency while maintaining low operating costs. Additionally, in order to meet any production challenges, the process of loading and unloading the workpieces can be performed during the cutting process, which significantly increases production efficiency and reduces machine downtime to a minimum. The offered BySprint 3015 laser cutting machine has been regularly serviced and its total weight is approximately 12000 kg. Technical specifications of the BYSTRONIC BySprint 3015 laser - laser beam power: 3 kW - laser beam power adjustment range: 150 – 3000 W - work area (L x W): 3048 x 1524 mm - maximum sheet metal dimensions (L x W): 3000 x 1500 mm - ...

BYSTRONIC BySprint FIBER 6520 fiber laser was manufactured in 2016 in Switzerland. The extremely high-tech machine achieves the highest productivity and precision in cutting thin metal sheets made of among others carbon steel, copper and brass, thanks to the use of innovative fibre optic technology. The workpieces are cut by a specially designed cutting head with an integral capacitive sensor that receives a high-quality beam with a power of 6 kW. The ByPos Fiber function adapts the focal length to the material and production range, resulting in extremely smooth edges without any irregularities. Designed for maximum user comfort, the laser cutting machine design features a large work table of 6500 length and 2000 mm width with micro-welds to support small, long and thin parts. The entire work area also features a special protection system designed to provide the user with a high level ...

Bystar 4025 NT 65plate size:6500mm x 2500mmchangetable system axis of rotation: 15 - 315mm4.4 kw CO2 laser steel up to 25mmswitching hours 18000vacuum pump 16000With filter system is already dismantled; ready for immediate use

Used Carrier 30 RBP 800R air-cooled chiller on Freon type R-32 with low operating hours. Complete with Danfoss DSF530A4ACA (x3) & DSF485A4ACA (x4) scroll compressor, condenser with 12 fans a total airflow of 3.168 m³/h, plate heat exchanger as evaporator, 2 Schneider ATV212HU75N4 fan speed regulators and ATV212HD15N4 pump speed regulator, 2 Danfoss 034Z0177 filters drier and a control panel with a SmartVu HVAC CEPL131229-01-R-S control. Specifications: Brand: Carrier Type: 30 RBP 800R Product type: Air cooled chiller Capacity kW: 852,0 kW Capacity tons: 242,2 tons Refrigerant: Freon Refrigerant type: R-32A Weight: 4245 kg Dimensions: 8200x2500x2300 mm (LxWxH) Compressor type: 3x Danfoss DSF530A4ACA & 4x Danfoss DSF485A4ACA Display: SmartVu HVAC CEPL131229-01-R-S Number of fans: 12 Year of built: 2022 Operating hours: 5816 Amount in stock: 1

Multicyclone filter with 90,000 km of air volume for the extraction of planel spaens, fraesspaenes and saegespaenes. With compressed air cleaning of 208 filter slurs. 8 entrance flaps Multicyclon filter with 90,000 km volume for chips from planerline, fingerjointing line; incl. air cleaning for 208 filterpipes

Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminium and titanium alloys The Concept Laser M2 cusing Multilaser is designed in accordance with ATEX directives and enables thus a safe processing of reactive materials. Like all machine solutions from Concept Laser, the model has a spatial separation from the process chamber and handling area for ease of use and safety. The system is robust and suitable for 3-shift operation. In addition, the laser source and filter technology are integrated into the system, resulting in a small footprint. The large filter area of 20 square meters reduces the change intervals of the filter, so that the system availability is increased. In addition, the M2 cusing Multilaser has a water-floodable filter as standard, where a safe filter change is ensu ...

The Cretel container washer is specially designed for the cleaning of plastic or steel containers like DOLAV, Euro containers, car Bins etc. It can be considered as a reliable and proven system thanks to its proven concept with a high standard on hygienic design, water, chemicals and energy consumption Double spraying system for inside and outside cleaning Freely adjustable washing cycle Inclined position of the containers during washing process TWIN version available to double the capacity Rotative filters possible for extensive soiling (in option) Combination with washing bins is possible (in option

Machine on Sale: NOVA JET CLEANING & IRON SCREENS KIT On sale Nova Jet Cleaning & Iron screen kit installed in 2018. Machine is in perfect running conditions and well maintened as worked very few hours (less than 1000h). The complete lot include everything necessary to run the machine along with all perifericals and large set of spare parts for the machine. Machine is fully operational and can be visited for a test and inspection. Lot composition: 1.- Nova Jet Cleaning System for stripping rotary nickel screens. Specifications: • • Max screen lenght 3200mm Rapports available 640mm, 819mm, 914mm y 1014mm (inner brushes for all sizes, most of them new as never been used) Included with Stripping machine • Oil cooler MCO-7OB de 7kw. • Inverter ABB de 55kw • Stripping control unit. 2.- Nova Ironing machine to iron screens after stripping. Specifications: • M ...

BRAND: CUMMINS MODEL: KTA19 M3 POWER: 447,42 kW (600 hp) 1800 rpm Condition: New Features:, Flywheel housing ,Flywheel ,Governor ,Exhaust system, ,Cooling system ,Starter/Panel ,Water Pump ,Oil Filters ,Turbocharger Weight (kg) Engine: 2200 Dimensions (cm) 210 x110 x170

System Components: ​ Control Panels (in control room) Washing Unit - 1 set Control Panel Centrifugal Ventilator - 22KW Booster Pump System - 15HP Pre-Heater - 780,000Kcal/hr - 1 set Control Panel Shot Blast Machine - 1 set Control Panel Bucket Elevator - 2 sets Air Receiver Tank - 3cu.m Dust Collector - 1000cu.m/min Dust Collection Buckets Water Paint Booth - 1 set Control Panel Air Motor - 100PSI - 3 units Air Diaphragm Pump - 1 unit Mixing Bucket - 2 units Paint mixing tools and jigs Activated Carbon Tower - 400cu.m/min 1 set Dry Oven - 300,000Kcal/hr Control Panel Marking Unit - 1 set Control Panel Rectifier IN/OUT Conveyor - 4.6MW x 230.95ML Control Panel ​ Accessories/other items included: Portable Vacuum Recovery - 1 unit Fan - 11KW; 3P; 440V; 60Hz Exhaust Fan - 1,646W; 220V CO2 Mag Welders - ProPAC600A - 3 units Gouging Machine - LH ...

Multilayer filter Manufacturer : Didier Filtertechnik GmbH Eisenberg Capacity: 170 liters Technical data : Stainless steel filter Double Coat Operating pressure interior 6 bar Indoor operating temperature 200 °C Interior capacity 170 liters Operating pressure double jacket 6 bar Operating temperature double jacket 200 °C Capacity double jacket 12 liters Equipment: closed system, complete emptying, hydraulic pressure of the filter layers Throughput from 1 to 10 m³/h Filter area from 0.28 m² to 2.8 m²

Multilayer filter Manufacturer : Didier Filtertechnik GmbH Eisenberg Content: 170 litres Technical specifications : Stainless steel filter Double coat Operating pressure interior 6 bar Indoor operating temperature 200 °C Interior capacity 170 litres Operating pressure double jacket 6 bar Operating temperature double jacket 200 °C Capacity double jacket 12 litres Equipment: closed system, complete emptying, hydraulic pressure of the filter layers Throughput from 1 to 10 m³/h Filter area from 0.28 m² to 2.8 m²

Complete solution for the transport of bulk materials and demetalization of magnetic metal impurities. Aluminium riser conveyor belt incl. substructure Slope beginning area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height-adjustable Construction for suspension of the DMPM1200 overbelt magnetic separator included Conveyor belt width 500mm (adjustable) We supply our conveyor belts in PVC, PU or rubber. PVC conveyor belt incl. carrier and shaft edge Drive: Motor 0.25KW ( adjustable ), speed 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm T-20 tunnels - 400mm pitch 2-layer particularly transversely stable Our core competence lies in providing the customer with exactly what he really needs. Together with our c ...

Aluminium angle conveyor belt with substructure Conveyor belt length: 1000mm flat + 2400mm rising Slope angle in kink 45°C Discharge height: approx. 2000mm Height of the horizontal 300mm top edge PPU conveyor belt FDA Food compliant Conveyor belt EM 15/2 0+17 PU blue 7 white Belt width 400mm T20 stud welded - pitch 202mm antistatic due to threads in the fabric of the running side endlessly welded with stepped finger connection 30mm shaft edge high on both sides high frequency welded Edge-free zone on both sides for belt guidance in the slope Transverse arrangement -70/+35/-5/+190/-5/+30/-70mm Full-surface underlay sheet Drive: Motor approx. 0.25KW Belt speed approx. 0.3m/sec Connection 220/400V, 50Hz protection class IP54 Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-speci ...

LINE FOR FILLING EDIBLE OIL IN 1,0 LTR. PET BOTTLES Capacity: 6,000 hph x 1.0 L conisting of: Blower KOSME KSB 3000 – 2001. – 2 pcs x 3,900 fph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. - 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filler and capper – ICS-Slovenia - 1995 – 6,000 L/h Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3x5 bottles – ICS – 1995 Shrink wrapper SMIPACK-packer in foil 2x5 bottles – 2013 Pallet wrapper ZLATOROG-Slovenia – 1999 KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth approx. 30.000.- EUR It has complete technical documentation Required space for eq ...

DYNAJET 500th HELI Blue Performance INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. Construction: • 1-axle chassis for easy manoeuvring • Self-supporting and indestructible framework for weight optimization • Central crane eyelet for optimal transport in hard-to-reach places • Frame in dip painting technology for high corrosion protection and hi ...

BECO KD 10 - depth layers Manufacturer: E. BEGEROW GmbH & co. Type: KD 10 Item No.: 22100160 Dimensions: 600 x 615 mm Pack size: 50 pieces Depth layers are still in their original packaging and therefore unused! Therefore new and in very good condition! Price refers to 1 piece.

ECKERT JANTAR 2 plasma cutting machine was manufactured in 2008 in Poland. The machine equipped with a large working table of 12500 x 2500 mm (length x width) is designed for cutting oversized metal sheets made of carbon and low-alloy steel of maximum thickness of 25 mm (plasma cutting) or 110 mm (oxygen cutting). The torches are powered by a highly efficient HYPERTHERM HPR260 plasma source with a power of 260 A, guaranteeing excellent precision and many years of trouble-free operation. The ECKERT JANTAR 2 12.5×2.5 m plasma-gas cutting machine ensures a high level of safety. A KEMPER filtration system with self-cleaning filters and an extraction table eliminate contamination generated during workpiece machining. The plasma cutting machine is numerically controlled by an ECS 859 controller with all the necessary functions for efficient use of the machine. Technical parameters of th ...

ECKERT SZAFIR BL2 3D plasma cutting machine was manufactured in Poland in 2016. The plasma cutting machine uses a plasma beam generated by a highly efficient KJELLBERG Smart Focus 200 aggregate with a power of 200 A to precisely cut workpieces made of mild steel, stainless steel and aluminium. Stability during machining is ensured by the machine’s high-quality steel portal, which was additionally extended by 700 mm to allow easy loading and unloading of larger metal sheets. The plasma-gas cutting machine guarantees a high level of safety and operator comfort, thanks to a sectional extraction table with a length of 6000 mm and a width of 2000 mm, which is used to eliminate the dust produced during cutting. The plasma-gas cutting machine is also equipped with among others a CNC ECS 872 controller with a 15″ touchscreen, a WALTER SKTG 11 P COMBO screw compressor and a WALTER WDF 100  ...

Ref.-No. 00579 Z1 Description Used intensive mixer Manufacturer Eirich Type R08 Built in 1995 maximum filling 60l / 90kg Industry 7322 Granulating zinc oxide dust Control Not available Machine description - R08 (mixed material temp. max. 80°C) - Star-tangle tool; 4-stage; Li.-Run - Wirbler drive power: 5.5kW - Wirbler drive speed: 1000 rpm - Wirbler rotation direction: Left-hand run - Wirbler speed: 340 rpm - Wirbler circumference speed: 6.2m/s - Wirbler drive type: V-belt - Mixing container drive: friction wheel Type of wear - mixing container with soil wear segments + Wear wall - Star-wire tool with armor - Wall scrapers with armor Accessories - Storage vessel V=115l with Ebro shut-off valve DN200 and Vibration motor - Ebro shut-off valve DN150 on mixing container cover mounted (transition) - Dosing conveyor screw for zinc oxide filter dust, incline  ...

Evox Filters Finland TFNF-10

FANUC M-710iC/70 robotic station for laser cutting and welding was built in 2017. The offered station is complete and includes the following components: – FANUC M-710iC industrial robot – IPG YLS-4000-S2T fibre laser source – FANUC SYSTEM R-30iB controller – 2-position rotary table with horizontal rotation – 2-axis L” type positioner – semi-automatic head changing system – HIGHYAG BIMO-FSC laser cutting head – IPG Photonics FLW-D30 Vertical oscillating laser welding head with HD camera – KLIMAWENT UFO-4-M/N-1/R filtering system – wire feeder (4 reels and equipment for 0.8 mm and 0.6 mm wire) – portable teach pendant FANUC A05B-2255-C101 – control system – metal construction with cabin Laser machining of workpieces is performed by a specially designed FANUC M-710iC/70 robot arm, distinguished by the best permissible load and inertia in its categ ...

FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world’s most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. DESIGN & TECHNICAL FEATURES • Sterilizing c ...

FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world's most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. • Single-leaf flush door on both sides ...

Schnierle machines, for over 70 years in Grömbach (Freudenstadt district) Good day we offer you proven compressors, filter stages, refrigeration dryers and suitable piping systems. The systems are carefully planned and installed by us. Consulting, planning, delivery, installation, maintenance and repair, all from a single source. We will be happy to configure the right machine for your needs. Consulting and sales: Clemens Schnierle Machines + Tools Drosselstr. 1 Phone 07453 9199924 Web: csm-maschinen

Available in stock 12 x Oil filters Fleetguard LF691A. Suitable for CAT3412 (Cross-Reference: 1R-0716) New Surplus. Wrapped in Plastic.

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Schwere Bandschleifmaschine für alle Schleifarbeiten. Kraftvoller Motor, starke Absaugung, vibrationsarmer Lauf. Einfache Bedienung. Serienmäßig mit 2 Bandgeschwindigkeiten durch einfaches Umlegen des Keilriemens. Einfacher, kräftesparender Transport durch Zerlegen oder Nutzung des Fahrgestelles auch auf Treppen. Geeignet für die Montage eines Papierstaubfiltersackes. Lieferung komplett mit Stoff - Staubsack und Kabel. Technische Daten: - Spannung 230 V 50 Hz - Leistung 2,5 kW - Gewicht 79 kg - Bandgeschwindigkeit 1.238 / 866 m/ min. - Schleifbandabmessung 200 x 750 mm

GEIBEL UND HOTZ FS 420 SC surface grinding machine manufactured in 2006 in Germany, is designed for single or serial grinding of workpieces. The machine, distinguished by its high performance and reliability, machines workpieces with a maximum weight of 150 kg with the circumference of grinding discs on a magnetic plate with holding force control and demagnetisation function. During the process, special sensors ensure that the grinding wheel is properly balanced, guaranteeing the highest precision and quality of machining. The GEIBEL & HOTZ FS 420 SC magnetic grinding machine uses an energy-efficient hydraulic system to drive the work table, which provides the exact oil flow required to move the table. The pump is equipped with special filters to remove ferromagnetic impurities and non-magnetic substances from the coolant, resulting in safe and trouble-free operation of the grinding m ...

Used fluid bed dryer made by Glatt, model WSG-60 - New: 1978. - All documents for the WSG are still available and filed in a folder. - The fluidized bed dryer works perfectly and has been upgraded with a modern frequency converter. - WSG is easy to regulate, which allows processing/drying of different products. - There are two boilers, each 240 liters. This allows one batch to be processed while preparing the next batch. - Nine filter bags, so it can be used for different products or when some filters need to be cleaned. - The machine is currently still connected. - Test of new user product possible. - The machine is being sold due to a company liquidation.

Automatic rotative machine for the moulding of car filters, air-oil, panel or circular, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of manufacture: Italy The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Specyfications: Available at 24 stations Turntable complete with 24 mould-holders Casting trolley with 2-axes Feeding machine for Polyurethane material Electronic control board to manage the functions of the machine Hourly output: from 200 to 350 pieces, according to the model of the machine, the utilized P.U. material and the mould -- Automatic rotary machine for forming car filters, air-oil filters, plate or round filters, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of origin: Italy  ...

Used 5-axis machining center Haas UMC-500SS with long automation Year of construction 2021 X-axis 610 mm Y-axis 406 mm Z-axis 406 mm Spindle nose to clamping surface (~ max.) 508 mm Spindle nose to clamping surface (~ min.) 102 mm Max. rated power 22.4 kW Max speed 00 rpm Max. Torque 122.0 Nm by 2000 rpm Drive system Inline Direct-Drive Cone CT40 Bearing Lubrication Air/Oil Injection Cooling Liquid Cooled Table Clamping surface diameter 400 mm Max. load capacity on clamping surface 226.8 kg T-slot width 16.00 mm Number of T-slots in basic equipment 5 Center distance of the T-slots 63 mm Tool Changer 50+1 Tools IKZ 21 bar Hinged belt chip conveyor Programmable coolant nozzle Compressed air flow through the tool Auxiliary coolant filtration system Rotary union 4 channel pneumatic Automation Lang RoboTrex 96 automation system complete robot automation including ...

Ride-on vacuum sweeper, Hako, Sweepmaster B900 R, for medium operating areas - used - : Prices from location: 11.500.-€ (net) Manufacturer: Hako Type: Sweepmaster B900 R Year of manufacture: not old, exact information must be submitted, but device was only used about 10 times Operating hours must be submitted later including charger Weight approx. 460kg Data according to manufacturer: Sweepmaster B900 R Working width with 1/2 side brush cm 95/120 Area performance theoretically with 1 side brush, Main sweeper roller²/h 5,700 Working speedkm/h 6 Sweeping container volume l 60 Total powerkW 1.7 Nominal voltageV 24 Battery capacity maximum Ah 180 Lengthcm 150 Widthcm 100 Height above seatcm 133 Condition: good – very good Available: immediately Location: North Rhine-Westphalia, later Frankenberg camp Up to two side brushes enable thorough sweeping c ...

- 15000 sheets / h - Prinect PressCenter 2 - Prinect EasyControl 2 - Preset Plus Feeder - Alcolor Vario dampening system - Technotrans HydroStar alpha.d 50L - Alcosmart AZR - Autoplate - Ink roller wash-up device - Blanket wash-up device - Impr.cyl. wash-up device - Coating unit with chamber blade - PowderStar AP262 - ScrollStar - FilterStar Compact - DryStar - Preset Plus Delivery