used CNC Cycle Turning Machines for sale

control: FANUC 21i-TB Control x-axis: 390 mmz-axis: 780 mmspindle taper: A2-11 number of spindle speeds: 2000rpm engine output: 37 kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: 1905,0 × 2720,0 × 3260,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: NC Cycle Lathe Manufacturer: Emco Type: Emcomat EM300x2000 Year of Make: 2015 Condition: used / very good, few operating hours Serviced exclusively by Hedelius Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-EMC-0824 DESCRIPTION We offer you a used NC cycle lathe from the manufacturer Emco. Control Fagor Spindle speed max. 2500 Multifix Base Holder Tip width 2000 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Turning length: 3000 mm Turning diameter: 870 mm above bed 560 mm over cross slide Weight between tips: 3,600 kg without bezel 4,400 kg with 1 bezel 5,600 kg with 2 bezels Spindle speed: 0 - 900 rpm Spindle bore: 162 mm Control: Fagor Equipped with: - Extra jaw chuck on the rear side of the main spindle - 1 fixed bezel Ø420 mm - 1 rotating bezel - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 tool containers - Coolant and chip container at the rear - Machine documents Country of origin: Spain Motor power: 30 kW Machine weight: 9,000 kg Machine LxWxH: 5.1 x 2.4 x 2.0 mtr.

Manufacturer: Gildemeister Model N.E.F. 320 HH Year of construction 2002 Condition Used Control Heidenhain Specifications Circumferential diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder 4-fold ready Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirements approx. 2500 x 1800 x 1885 mm Accessories 3 Jaw chuck Schunk Rota S Plus 200-52 14x Tool Holders Lunette Rotating center punch Documentation The machine is under power and can be visited. Errors of technical data and prior sale reserved.

For sale: Heyligenstaedt flatbed teach-in lathe equipped with an RND teach-in control. This is a very robust teach-in lathe with a very easy-to-use controller. The center distance of this lathe is 7,000 mm. The center height is 630 mm and the bed width is 800 mm. The machine is equipped with a 4-jaw chuck with a diameter of approx. 1400 mm. The maximum speed is 500 rpm. The machine is equipped with a hand-operated 4-speed quick-change chisel holder. The feed speed is between 0.5 and 400 mm/min. The machine is also equipped with a rapid traverse with a speed of 3.5 and 1.4 meters in longitudinal and transverse movement. The machine is also equipped with a heavy-duty tailstock with MC-6 mount. The quill has a diameter of Ø 200 mm and is also adjustable by 200 mm. There are two fixed frames on the machine, which have a diameter of Ø 500 mm and Ø 850 mm. The machine is available at short  ...

Siemens Control 828 D Circulation over bed 560mm Circulation via cross slide 390 Circulation via recess 810 mm Center width 3000 mm Headstock Borungh D1-8 Spindle Nose Bushing MK7xMK5 Spindle speed 3 steps, max 2500 Travel Quill 200 mm Diameter quill 75 mm Bed width 345 mm Overall length 5170 mm, width 2100 mm, height 2230 mm Net weight 4000 kg Accessories 2 x chip conveyor, glue bar lathe chuck, turret, quick-change holder, El. Handwheels. 3 x steady rests, coolant system, manuals

spindle bore: 90 mmspindle diameter in front bearing: 140 mmquill stroke: 200 mmdiameter of quill: 100 mmReceiving ball: 5 MKturning speed range: 1-2000 U/minface slide travel: 420 mmweight of the machine ca.: 0 tdimensions of the machine ca.: 0 m- Three-jaw chuck Ø315mm- 1x riding sock- 2x steady rest- Multifix inserts- 12x tool holder- 6x jaws with base holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 475 mmturning length: 1150/1650 Option mmcontrol: total power requirement: 20 kVAweight of the machine ca.: 3450 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

achine details Stock-No. 1105-04028 Type of machine Lathe - cycle-controlled Make MONFORTS Type KNC 1000 x 3000 Year of manufacture 2008 Type of control NC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis free load Price Technical details turning diameter 1000 mm turning length 3000 mm control MTC-K turning speed range 3-1800 rpm transmission ratio 8 SPEED TURRET VDI 40 spindle nose A2-8 swing dia. 720 mm tool holder VDI 40 chuck: SCHUNCK total power requirement 30 kW Additional information KNC 1000 X 3000 CYCLE TURN FROM 2008 WITH 2 STEADY CHUCK TURRET 8 POSITION VDI 40 CNC CONTROL MONFORTS EURO TURN CYCLE CNC NICE AND BIG MACHINE TURNIG 3000 X 1000 MM

Monforts KNC5 1500 Cycle Lathe Year of manufacture 2001 Very good maintained condition Turning diameter 500 mm Turning length 1500 mm Steuerung MONFORTS CONTROL Control system SYSTEM EURO TURN Turning diameter over bed slide 290 mm Spindle bore 70 mm Spindle speeds 3 - 2800 rpm Spindle power 15 kW Torque at the spindle 1530 Nm Spindle Head DIN 55027 Gr. 8 Feed force X/Z axis 11300 N Rapid traverse - longitudinal/flat 10 / 5 m/min Bed width 360 mm Face slide path 265 mm Upper slide path 140 mm Turning chisel shank cross-section 32 x 25 mm Tailstock quill diameter 80 mm Tailstock quill stroke 160 mm Tailstock mount MK 5 Total power requirement kW Machine weight approx. 3.3 t Dimensions of the machine approx. L x W x H 3.45 x 1.65 x 1.93 m Accessories: 3-jaw chuck Forkardt F250 Various tools Coolant Setup according to photos If you have any questions, pleas ...

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

FOR SALE: Potisje cycles lathes type PA-50 CM with Fagor 8055T control. Turning diameter top bed 1000 mm, turning diameter above cross slide 700 mm. Turning length 6,000 mm. Chuck size 400 mm, spindle bore 140 mm. Speed range 1 - 800 rpm. Bed width 650 mm. Main spindle power 28.5 kW. Machine weight 13,500 kg

turning diameter: 570 mmturning length: 2000 mmcontrol: total power requirement: 15 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

• Height of centers 750 mm • Distance between centers 5000 mm • Diameter on the bench 1500 mm • Diameter on the carriage 1050 mm • Main engine power 75 Hp • Baruffaldi BA 300 4-position automatic turret • CNC ECS 2400 • Hydraulic chuck • Max. permissible weight between the tips without steady rests kg. 15000 • Max. permissible weight on the platform, cantilevered, with centre of gravity at 300 mm: kg. 3800

Universal lathe of the Weiler brand suitable for tooling, fixture construction, training and mould making Tip Height : 280mm Speed :48-2500 rpm Tip height : 280 mm Circumferential diameter over bed : 570 mm Circulation diameter over face slide : 340 mm Center width : 1,000 mm Rhqel FULCRUM SHAFT Spindle head DIN 55027/DIN ISO 702-3 : Gr. 8 Spindle bore : 83 mm Spindle diameter in front bearing : 120 mm MAIN DRIVE Drive power 60 %/100 % ED : 15/12 kW Speed range : 1 – 2,500 rpm Number of speeds : infinitely variable FEED RANGE Number : infinitely variable Longitudinal : 0.001 – 10 mm/rev Plan : 0.001 – 10 mm/rev Longitudinal feed force : 10,000 N Feed force plan : 7.000 N Max. longitudinal rapid traverse speed : 6/3 m/min THREADING AREA Metric threads : 0.1 – 400 mm Inch thread : 56 – 1/4 TAILSTOCK Quill ...

Machine type: Lathe - cycle-controlled Manufacturer: WEILER Type E30 Year of manufacture 1991 Weiler control Country of origin Germany Additional information Cycle-controlled lathe HAMLET - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Circumferential diameter over bed 330 mm Circulation diameter max. via face slide 160 mm Slide travel 180 mm Bed slide longitudinal travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 rpm/-1 Drive power - main spindle 9 / 11 kW Max. torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in the vord. Bearing 70 mm Spindle bore 40 mm Usable rod diameter ( - ) mm Tool carrier: Type MultiFix Turning chisel shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock mount MK 3 Feeds: Rapid traverse max. 10 m/min Fee ...

Machine is in top condition and incl. accessories ( 20 Multifix holders, 70 collets, glory chuck) , 1 - 4500 rpm, 1300 kg, can be viewed under power

approx. 33600 switch-on hours swing over bed 570 mm, over support 340 mm Center width 2000 mm Speed range (1/min) Level 1: 1-625, Level 2: 4-2500 Spindle bore 83 mm Tailstock quill D 80 mm, mount MK 5 Main drive 20/17 kW, connected load 30 kW Incl. Control Siemens Tool turret 8-speed Sauter Chip conveyor with coolant device Mayfran Movable chip protection cover 3-jaw chuck Schunk Rota S 250 Manuals