lathes used for sale

turning diameter over bed: 1000 mmspindle passage: 128 mmturning length: 5000 mmtotal power requirement: 22 kWweight of the machine ca.: 16 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of Make: 2012 Spindle bore: 66 mm Center width: 1000 mm Circulation Ø over bed : 435 mm Circulation Ø over face slide: 200 mm Tip height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed SAUTER turret with AGW and tool drive C axis via main drive 3 pcs driven tools VDI 30 3 jaw chuck FORKARDT 0 250 mm 1 pc. fixed lynette 0 120 mm Tailstock with extendable drill quill Coolant device Coolant spray gun Chip drip tray 5 Pcs Height-Adjustable Machine Shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION THE MACHINE WAS ONLY USED FOR TRAINING THE MACHINE HAS ONLY 9044 POWER-ON HOURS

Circumferential diameter over bed ... 710mm Turning length ... 2000mm Max. workpiece weight... 850kg Circumferential diameter via support ... 420mm Spindle bore... 73.5mm Spindle speed ... 10-1000 rpm Main engine power ... 7.5kW L x W x H ... 4100x1400x1560mm Machine weight ... 3080kg The machine is in good condition, possible to test under power.

Circumferential diameter over bed ... 500mm Turning length ... 2000mm Max. workpiece weight ... 300kg Circumferential diameter via support ... 270mm Spindle bore ... 52mm Spindle speed ... 22-2000 rpm Main engine power ... 5.5kW L x W x H ... 3640x1100x1580mm Machine weight ... 1940kg The machine is in good condition, possible to test under power.

Circumferential diameter over bed ... 500mm Turning length ... 1500mm Max. workpiece weight ... 300kg Circumferential diameter via support ... 270mm Spindle bore ... 52mm Spindle speed ... 22-2000 rpm Main engine power ... 5.5kW L x W x H ... 3140x1100x1580mm Machine weight ... 1835kg The machine is in good condition, possible to test under power.

CNC Universal Lathe GILDEMEISTER NEF 400 With Siemens Sinumerik 840 D controller Year of Make: 2009 Circulation Ø over bed: 385 mm Circulation Ø over slide: 350 mm Turning length: 650 mm Spindle bore: 65 mm Flat travel ( X ) : 255 mm Plan travel ( Z ) : 800 mm Speed max. 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed revolver Tailstock with quill 3 jaw chuck hydraulic Schunk ROTA NCK plus 0 210 mm Coolant Setup 4 pcs machine shoes Operating instructions THE MACHINE COMES FROM A VOCATIONAL SCHOOL MINT CONDITION ONLY 676 POWER-ON HOURS ONLY 120 SPINDLE HOURS !

Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of Make: 2013 Spindle bore: 66 mm Center width: 1000 mm Circulation Ø over bed : 435 mm Circulation Ø over face slide: 200 mm Tip height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed SAUTER revolver 3 jaw chuck RÖHM 0 200 mm Tailstock with extendable drill quill Coolant device Coolant spray gun Chip drip tray 5 Pcs Height-Adjustable Machine Shoes Operating instructions

CNC lathe GILDEMEISTER CLX 350 V3 With DMG MORI SLIMline Multi Touch SIEMENS controller Year of manufacture: 2018 Turning diameter: 320 mm Travel in X: 242 mm Travel in Z: 580 mm Spindle bore: 73 mm Speed range: 20 – 5000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven tool stations VDI 30 Tailstock with quill Conveyor 3 jaw chuck hydraulic Schunk ROTA THW plus 0 210 mm 15 set of soft top jaws Various turning tools Foot switch for jaw chuck adjustment + tailstock adjustment 20pcs VDI 30 tool holders Hollow clamping device DMG MORI Netservice client Signal lamp 4 colours Coolant device with high-pressure pump 12 bar Coolant spray gun Operating instructions THE MACHINE IS IN VERY GOOD CONDITION POWER-ON HOURS: 3339 hrs PROGRAM RUN: 1209 hrs.

CNC turning-milling center YCM GT250 MA Max. turning diameter: 270 mm Max. turning length: 560 mm X-axis travel: 230 mm Z-axis travel: 560 mm Operating hours read :10,762 h Accessories included: Yes Integrated C-axis: Yes Control: Fanuc TXP-200e Number of tool positions: 12 Number of driven tool positions: 12 Number of Controlled Axes: 2 Spindle bore: 62 mm Tool holder: VDI 40 Speed Range: 20-6000 1/min Total drive power: 15 kW Weight approx.:6.000 kg Dimensions approx. (LxWxH) 3,700 x 2,400 x 2,100 mm Price on request

CNC Lathe YCM TC-2 Article number: 04-02-090 Manufacturer: YCM Good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: approx. 1990 L x W x H: approx. 2400x1400x2100mm Weight: approx. 3600kg Control: Fanuc O-T Turning diameter over bed: approx. 480mm Turning diameter over slide: approx. 310mm Spindle bore: approx. 52mm Max. machining diameter: approx. 250mm Center width: approx. 550mm Speed range: approx. 110-3500 rpm Feed X: approx. 10 m/min Feed Z: approx. 15 m/min Tool turret: 8 stations Accessories: 3 Jaw chuck Various tool holders Conveyor Machine feet Documentation Running tip Various jaws Other accessories on request Price and other technical data on request

Lead and Pull Spindle Lathe OPTIturn TH 3309D Technical details and features: Manufacturer: Optimum Model: OPTIturn TH 3309D Year of construction: 2024 Condition: New machine Shipping time: Immediately available (subject to prior sale) Dimensions and weight: Length (product): approx. 1685 mm Width/depth (product): approx. 745 mm Height (product): approx. 1590 mm Weight (net): 512 kg Areas of work: Tip height: 165 mm Center width: 830 mm Circumferential diameter over machine bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Range: Number of speed ranges: 16 Speed range: 70 – 2000 rpm⁻¹ Electrical data Power drive motor: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 4 Spindle bore/rod passage diameter: 38 mm Steel holder mount ...

Key data: 16 mm, 3200 mm

Manufacturer: Star + FMB Type: SA 16 - RC + turbo 2- 16 Year of Make: 2005 Control: Fanuc Series 18i - TB Number of spindles 2 Turning diameter maximum 16 mm Drilling diameter max. 7 mm Thread diameter max. M 6 (Metric) Spindle speeds: Infinitely variable from 500 rpm to 12000 rpm Spindle power 2.2 kW Sub-spindle speeds: from 500 rpm to 9000 rpm Tap diameter M 6 (Metric) Workpiece length for counter-machining max. 85 mm Speeds driven tools 7500 rpm Power of rotating tools 0.4 kW Drilling diameter max. 4 mm Tap diameter M 3 (Metric) Tool shank cross-section 10 mm Collet holder type ER 11 Rapid traverse 20 m/min Cutting speed 10000 mm/min Connection 50 Hz 3x 400 Volt Spindle motor 2.2 / 3.7 kW Power of the sub-spindle 1.1 / 0.5 kW Connection to compressed air 5 bar Total power requirement 6 kVA Machine weight  ...

Key data: 16 mm, 3200 mm

Manufacturer: Star + FMB Type: SA 16 - RC + turbo 2- 16 Year of Make: 2005 Control: Fanuc Series 18i - TB Number of spindles 2 Turning diameter maximum 16 mm Drilling diameter max. 7 mm Thread diameter max. M 6 (Metric) Spindle speeds: Infinitely variable from 500 rpm to 12000 rpm Spindle power 2.2 kW Sub-spindle speeds: from 500 rpm to 9000 rpm Tap diameter M 6 (Metric) Workpiece length for counter-machining max. 85 mm Speeds driven tools 7500 rpm Power of rotating tools 0.4 kW Drilling diameter max. 4 mm Tap diameter M 3 (Metric) Tool shank cross-section 10 mm Collet holder type ER 11 Rapid traverse 20 m/min Cutting speed 10000 mm/min Connection 50 Hz 3x 400 Volt Spindle motor 2.2 / 3.7 kW Power of the sub-spindle 1.1 / 0.5 kW Connection to compressed air 5 bar Total power requirement 6 kVA Machine weight  ...

Key data: 16 mm, 3200 mm

Manufacturer: Star + FMB Type: SA 16 - RC + turbo 2- 16 Year of Make: 2005 Control: Fanuc Series 18i - TB Number of spindles 2 Turning diameter maximum 16 mm Drilling diameter max. 7 mm Thread diameter max. M 6 (Metric) Spindle speeds: Infinitely variable from 500 rpm to 12000 rpm Spindle power 2.2 kW Sub-spindle speeds: from 500 rpm to 9000 rpm Tap diameter M 6 (Metric) Workpiece length for counter-machining max. 85 mm Speeds driven tools 7500 rpm Power of rotating tools 0.4 kW Drilling diameter max. 4 mm Tap diameter M 3 (Metric) Tool shank cross-section 10 mm Collet holder type ER 11 Rapid traverse 20 m/min Cutting speed 10000 mm/min Connection 50 Hz 3x 400 Volt Spindle motor 2.2 / 3.7 kW Power of the sub-spindle 1.1 / 0.5 kW Connection to compressed air 5 bar Total power requirement 6 kVA Machine weight  ...

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of Make: 2002 Spindle bore: 70 mm Center width: 1000 mm Circumference Ø over bed : 500 mm Circulation Ø over face slide: 290 mm Tip height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 10 VDI 30 tool holders 2 pcs of VDI 30 powered tools Coolant Setup 3 jaw chuck SCHUNK 0 250 mm ICP Contour Programming Tailstock with extendable drill quill Chip tray Operating instructions

Key data: 16 mm, 3200 mm

Manufacturer: Star + FMB Type: SA 16 - RC + turbo 2- 16 Year of Make: 2007 Control: Fanuc Series 18i - TB Number of spindles 2 Turning diameter maximum 16 mm Drilling diameter max. 7 mm Thread diameter max. M 6 (Metric) Spindle speeds: Infinitely variable from 500 rpm to 12000 rpm Spindle power 2.2 kW Sub-spindle speeds: from 500 rpm to 9000 rpm Tap diameter M 6 (Metric) Workpiece length for counter-machining max. 85 mm Speeds driven tools 7500 rpm Power of rotating tools 0.4 kW Drilling diameter max. 4 mm Tap diameter M 3 (Metric) Tool shank cross-section 10 mm Collet holder type ER 11 Rapid traverse 20 m/min Cutting speed 10000 mm/min Connection 50 Hz 3x 400 Volt Spindle motor 2.2 / 3.7 kW Power of the sub-spindle 1.1 / 0.5 kW Connection to compressed air 5 bar Total power requirement 6 kVA Machine weight  ...

Maximum turning length: approx. 1500mm Maximum turning diameter: approx. 700mm Maximum turning diameter over support: approx. 460mm Spindle diameter: approx. 80mm Spindle power: approx. 10kW Maximum spindle speed: approx. 1120 1/min Accessories  Cheek chuck  Various interchangeable jaws  1x quick-change holder  Bezel  Complete documentation  Guide and pull spindle cover  Lining protection L x W x H: approx. 3800x1500x1700mm Weight: approx. 3200kg Other accessories on request Price and other technical data on request

Key data: 475 mm, 1000 mm, 13 1/min

Specifications: Max. turning diameter over bed: approx. Ø 475mm Max. turning diameter via support: approx. Ø 270mm Max. turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 13-2000 rpm Spindle nose: A 2-6 Drive power: approx. 7.5kW Automatic longitudinal and planar feeds: Feed range: approx. 0.014-1.00 mm/rev Suitable for threads: metric 0.30 – 10 mm inches 80 – 2 3/4 Gg/ Diametrically – Pitch Thread 80 – 5.5 Dp Module 0.2-5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick-change holder size B + 1 insert  Bed stop  Work light New  Coolant Facility New  Complete documentation  NOT – Off  Various tension wrenches  Machine feet  Electric lining guard New  Drill chuck optional  Running tip optional  Guide and pull spind ...

CNC Universal Lathe GILDEMEISTER CTX beta 1250 With control Heidenhain Manual iT Plus Year of Make: 2008 Circulation Ø over bed: 700 mm Max. turning diameter: 410 mm Spindle bore: 87 mm Longitudinal travel ( Z ) : 1250 mm Speed 25 - 4000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations 3 jaw chuck hydraulic 0 250 mm with foot switch Hydraulic Lynette SMW Autoblok 0 20 – 0 165 mm C Axis Various tool holders VDI 40 2 pcs driven tools VDI 40 Tailstock with quill Conveyor Oil mist extraction Coolant Setup Operating instructions

Key data: 600 mm, 3000 mm

Control Mitsubishi ... M 70 V Turning diameter ... 600mm Turning length... 3000mm Spindle bore ... 104mm Powered tools Circumferential diameter over bed ... 600mm Circumferential diameter via support ... 310mm Axis Z ... 2800mm Axis C ... 0,001° Spindle speed... 10-2500 rpm. Turret Machine weight... 5150kg L x W x H ... 5840x1888x2050mm The machine is in good condition, possible to test under power.