used Counting equipment for sale

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

ABB Arc Guard TVOC-2-240 Arc Flash Guard COMPLETE SET Built 2012 The new retail value for these parts is Euro 8500,- Like new, only been used for 3 years. 6x complete set available. -- TVOC-2-240 - ABB TVOC-2-240, ARC MONITOR W/HMI, 100-240VAC/DC The Arc Guard TVOC-2 builds on the well-appreciated TVOC design and offers unmatched arc monitoring. With over 35 years of experience, Arc Guard System has become an industry standard in several key markets, helping to protect personnel and businesses around the world. The TVOC-2 is an optical detection system that together with an external breaker can limit the damage done to personnel and equipment in case of an arc accident happening. Main benefits Increased safety to personnel and equipment Minimizes downtime after arc accident has happened Easy-to-read interface makes reading status information quick and easy Simp ...

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

ABG OMEGA 510 Converter  Manufacturer: ABG  Machine type: Omega 510 Converter  Type: Blanco labelling machine  Year of construction: 2010  Working width: 520 mm  Number of punching stations: 2  Equipment:  Unwinding - 76 mm  Splicing table  Side edge control  Grid take-off and matrix rewinder/grid rewinder  Label converter/label shifter for 110x75 mm format (not ABG)  Slitting station with 4 shear blades  2 separate rewinding axes  Tools: o Magnetic cylinder 134 Z or 16.75 o Magnetic cylinder 161 Z or 20.125

ABG DIGICON II - CONVERTING Year of Manufacture: 2009 ________________________________________ Product Description: Year of Manufacture: 2009 Location: Labelpresshop/Germany Availability: Immediately available Condition: Very good working condition, regularly maintained ________________________________________ Machine Specifications and Equipment: • Web width: 330 mm • Control panel: Movable central control panel • Unwinder: With web edge guide system • Corona Treatment System for surface preparation • Round-to-round Heat Sealing Unit • Flexo Printing Unit: Full / semi-rotary • Cold Foil & Lamination Unit • Drying System: UV and hot air drying • Central Dancer Roller for web tension control • Die-Cutting Unit: Full / semi-rotary with heating oven and Beck Gapmaster • Waste Removal System: De-weeding with rewinder • Slitting Knives: 2 bottom  ...

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

One color offset ADAST Dominant 516, in beautiful condition, extreemly well kept and maintained. VARN COMPAK III dampening system. All serial equipment and blower.

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A.. The machine, designed for machining workpieces with a maximum length of 1500 mm, is distinguished by the use of many state-of-the-art technical solutions. It thus meets all, even the most intensive challenges of modern business. The ADIRA BB3515 CNC press brake is equipped with a powerful electric drive , developed in Bluedrive technology. Compared to a standard hydraulic system, this drive is free of filters, seals and hydraulic oil. As a result, the machine is much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. Furthermore, ADIRA’s patented HEXA-C design concept minimis ...

AFM Harnaś R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harnaś R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harnaś R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14  ...

AFM TAE 25N CNC turning center was built in 1997 by the Polish company AFM ANDRYCHÓW. The highly efficient machine, which is used for unit or series production, is ideal for any industrial plant with an emphasis on quality and precision. The turning process of workpieces with a maximum diameter of 300 mm is performed automatically in a large work area equipped with a 12-position SAUTER tool head and a reliable spindle. All parameters are porgrammed in the intuitive SIEMENS SINUMERIK 840D CNC controller, which reduces the operator’s need to operate the machine to a minimum. The AFM TAE-25N CNC lathe weighs 4200 kg. Technical specifications of the AFM TAE 25N turning center - working feed of longitudinal slide (X axis): 385 mm - working feed of transverse slide (Z axis): 150 mm - working feed rate range in the X,Z axis: 0-15000 mm/min - rapid traverse in the X,Z axis: 15 m/min - ...

AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...

Gas Chromatograph Agilent Technologies 7890A GC System/7683 D Injector Manufacturer: Agilent Technologies Model: 7890A GC System/7683 D Injector Complete List of equipment available on request.

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

Available in stock 1 x NEVER USED Air Liquide Pressure Regulator DCn 300/3 Suitable for all industrial gases, including oxygen, acetylene and propane. Non corrosive and toxic gases excepted. The equipment was never used and is still inside the original packing. Maximum Flow Rate: 350 Nm3/h (N2) Maximum Inlet Pressure: 50 bar Adjusting Outlet Pressure: 1 to 18 bar

AIRPOL K7 rotary screw compressor was built in Poland in 2015. The versatile device driven by belt transmission, provides the user with the highest quality compressed air and ensures uninterrupted operation even during heavy loads. All this is ensured by the compressor’s cooperation with a reliable MARK OP 20 (A3) refrigeration dryer, which removes moisture and water vapour from the compressed air to minimise the risk of corrosion. Combined with efficient ventilation and an oil separation system, the compressed air is also characterised by a very low oil concentration and a slightly higher temperature than ambient. AIRPOL screw compressor together with the dryer weighs a total of 395 kg. Technical data of the AIRPOL K7 compressor - working pressure: 10 bar - engine power: 7.5 kW - capacity: 57 m3/h - refrigeration dryer pressure dew point: +3°C - cooling air requirement: 1200  ...

AJAN SHP 130 plasma cutting machine was built in 2015 in Turkey. This highly efficient and precise machine is used in the thermal cutting of stainless steel, structural steel and aluminium sheets. In the machining process, the AJAN SHP 130 1500 X 3000 plasma cutting machine uses a plasma torch, which is powered by a reliable 130 A plasma source. The lightweight design made of a stiffened profile additionally ensures that cutting is performed with the utmost stability, even during the most intensive machining. Any contamination generated during machining is eliminated on an ongoing basis by the extraction table, increasing operator comfort and safety. To this date, the machine has run for a small amount of time and is in perfect condition. The work table grate was replaced with a new one during a recent upgrade. The offer also includes optional equipment, which includes a torch holder  ...

Machine Details Stock-No. 1105-03925 Type of machine milling machining centers - universal Make AKIRA SEIKI Type RMV 250 RT 5 AXIS Year of manufacture 2014 Type of control CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock Dreieich Technical details X-Travel 500 mm Y-Travel 250 mm Z-Travel 400 mm table-size ROUND TABLE 250 mm spindle taper ISO HSK 63 spindle turning speed range 45 - 12000 rpm spindle drive motor 11 kW tool change unit 24 CNC-control FANUC OIMD voltage 380 V max. table load 200 kg Throat 380 mm total power requirement 17 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 3.5x 2.5x 2.60 m Additional information AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014 - coolant equipment TROUGHT THE SPINDLE 20 BARS CGIP CO? VOYER 5 AXIS MACHINE IN GOOD CONDITION

Available in stock 1 x Alfa-Laval Solenoid Valve Block (1763524-80). The equipment was NEVER USED.

Filling monoblock ALFATEK – Refermented beer Model: ELVIRA LP 12.6.15.1 Year: 2013 Speed: 2.000 bph Direction: Clockwise Rinser 12 clamps 6 heads for deaeration. Filler 15 valves – low pressure (0,1 – 0,2 BAR) Single head corker – Crown cap 26 mm and 29 mm (both equipment available) Available bottle formats: 0.33 lt cylindrical, 0.75 lt collio, 1.5 lt collio, 0.33 lt truncated cone Safety protections.

Built 1985, tank with weighing equipment in special steel, capactiy: 800 l, tank on 3 weighing cells, max. pressure: 6 bar.

CIRCULAR SAW model ALTENDORF F45 with 2 axes by CNC second hand machine in excellent working condiiton CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control electric movements of scoring unit , from the control panel technical data : anodized aluminum carriage mm. 3000 max.diam. blade ( with scoring blade ) mm.350 max.diam. blade ( without scoring blade ) mm. 450 blade rotation speed g/min.3000/4000/5000/6000 with scoring unit : Yes blade group inclinable at 45° cutting width on the parallel guide mm.1350 main saw blade . motor power 7.5 Hp scoring unit motor power Hp 1 machine equipment: aluminum telescopic rod n.01 DIGIT L digital disp ...

ALUWIL ST 3000 roller blind cutting table built in Poland in 2019 (implemented in production in 2022) offers the best combination of speed and precision in cutting thick materials. The fabrics arranged on a large working area are machined by an under-top mounted cutting blade with forward and reverse feed control via ALLEN-BRADLEY touchscreen HMI panel. Once the cut is complete, the knife automatically returns to its initial setting, followed by the release of the bilateral pneumatic hold-downs that hold the fabric. The ALUWIL ST-3000 fabric cutting table is also distinguished by its highly rigid steel-aluminium construction and extensive equipment, including a feed bar, fabric end detection sensor and measuring stop. The ALUWIL cutting table weighs 380 kg. Technical data of the ALUWIL ST 3000 fabric cutting machine - work area (L x W): 2800 x 2850 mm - circular cutting blade - fab ...

For sale: Amada APX 8025 press brake, year of manufacture 01.12.1995, model APX 8025 A51208. Price: 5.500 € (VB) Location: 90556 Cadolzburg, pick-up only. Condition: The press starts immediately and is mechanically fully functional. Important note: The controls (screen and keyboard) are defective, which is why the machine cannot be fully adjusted or referenced. Presumably, a repair or replacement of the control system is necessary to make the press ready for use again. The sale is carried out in the current condition, ideal for buyers with repair options or for spare parts. Specifications: Force: 80 tons Bending length: 2550 mm Stand width: 2050 mm CNC: Operator 7-axis Projection: 400 mm Stroke: 100 mm Stroke rate: 9 mm/s Number of axles: 7 Drive power: 10 kW Dimensions (L x W x H): 2900 x 2130 x 2100 mm Weight: 4400 kg Pick-up: The machine is in a hall in 905 ...

AMADA EM2510NT punching machine was built in 2005 in France by AMADA EUROPE S.A.. The machine, designed for machining of thin metal sheets with a maximum thickness of 3.2 mm, is distinguished by its high reliability and precision. All machining processes are performed with a high press force of 20 tonnes, by means of tools located in a 45-station turret. A brush table with integrated balls prevents scratches and nicks on the surface of the sheet metal, as well as facilitating its positioning. The AMADA EM 2510 NT punching machine weighs 18000 kg. Technical specifications of the AMADA EM2510NT punching machine - maximum press force: 20 t (200 kN) - number of axes: 5 (X,Y,T,C,A) - feed in the X/Y axis: 2500/1270 mm - feed rate in the X/Y axis: 100/80 m/min - maximum workpiece thickness (plain steel): 3.2 mm - maximum workpiece dimensions (L x W): 5000 x 1270 mm - maximum workpiec ...

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

AMADA LCG3015 laser cutting machine was built in 2013 in Japan by AMADA CO., LTD. The machine, designed for precision sheet metal cutting, is equipped with a reliable laser source of the highest energy efficiency. It generates a stable laser beam with a power of 3.5 kW and a thickness of only a few μm, which ensures very smooth and even edges along the entire length of the workpiece. All this is completed by an intuitive CNC control in which even the most advanced machining programmes are created in just a few steps. The AMADA LCG-3015 laser cutting machine weighs 8200 kg. Technical specifications of the AMADA LCG3015 laser - laser power: 3.5 kW - feed in the X/Y/Z axis: 3070/1550/100 mm - rapid traverse in the X/Y/Z axis: 120/120/80 m/min - cutting speed in the X and Y axis: 0-120 m/min - maximum workpiece weight: 920 kg - work table dimensions (L x W): 3000 x 1500 mm - work  ...

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

20 hl brewhouse delivered by ANT in 2014, available - 20 hl 3-vessel, mash mixer, lautertun, brewkettle/whirlpool, steam heated, with semi-automation. - 25 hl HLT - 200 kW natural gas steam generator (made by Manara, Italy) - Plate HX for cooling wort, with aeration system and 30 l in-line yeast vessel - Glycol chiller with tank - Brewhouse platform - Malt mill (made by Sommer, Germany) - Various piping, valves etc. The equipment is of good quality

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5 - 16 Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out an ...

2 round built, endlessly leading upwards, Spiral conveyor systems for crates and cartons. Manufacturer Apollo VIS Type spiral conveyor 162020 Equipment: 1000038 ICH Assembly: 990800431 Achievable height for carton discharge: 2,600 mm 2 round built, endlessly leading upwards, Spiral conveyor systems for trays and boxes. Manufacturer Apollo VIS Type spiral conveyor 162020 Equipment: 1000038 I assembly: 990800431 Achievable height for carton discharge: 2,600 mm

A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...

This flash pasteurizer was manufactured by APV in year 2005 for eliminating harmful microorganisms from beer before packaging. Pasteurizer is completely built on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using low pressure steam for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a heat exchanger, holding / pasteurization tube, control cabinet, pumps, pipes, valves and instruments all built on stainless steel frame. Technical Characteri ...

Manufacturer: Arburg Type: 320 C 500 - 250 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Max distance between plates: 550 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 1820 bar General Motor: 15 kW Heating: 6,5 kW Dimensions: 3,4 m x 1,4 m x 1,7 m Weight: 2830 kg Screen text: German Additional equipment Robot interface Core pull hydraulic: x1

Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Manufacturer/Manufacturer: Arburg Typ/Type: 320S 500-350 Bau-year year: 1998 Control/Controller: Selogica Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 320 mm x 320 mm Plate Groesse/Platen Size: 446 mm x 446 mm WZ Einbauhoehe/Mould hight: min 225 mm Oeffning weg/opening stroke: 350 mm Plate distance max/Max. Open Daylight: 575 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 182 cm/153 gram hp Spez. Spray./injection pressure: 2050 bar General General Motor/Motor Power: 18.5 kW Heating/heating power: 6.3 kW Dimensions: 3.7 m x 1.2 m x 2.1 m Weicht/Weight: 2600 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap Rdzenie x1

Manufacturer: Arburg Type: 420 C 1000 - 350 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min. 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 30 mm Stroke volume: 106 ccm / 97 gram PS Injection pressure: 2500 bar General Motor: 22 kW Heating: 5,8 kW Dimensions: 4,3 m x 1,6 m x 1,8 m Weight: 3700 kg Screen text: German Additional equipment: Robot Interface

Manufacturer/manufacturer: Arburg Typ/type: 420C 1300-250 Year/year: 1999 Control/controller: Selogica Clamping force/clamping force: 1000 kN Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm Disk size/platen size: 605 x 605 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 35 mm Stroke volume/shot volume: 144 CC / 132 gram PS spec. Spritzdr / injection pressure: 1820 bar General / General Engine power: 18.5 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.3 m x 1.7 m x 1.8 m Weight/weight: 3180 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robot

Manufacturer/Manufacturer: Arburg Typ/Type: 420C 1300 kN-350 Bau-year year: 1999 Control/Controller: Selogica Closing Power/Clamping Force: 1300 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 605 mm x 605 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 182 cc/166 gram hp Spez. Spray./injection pressure: 1670 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weicht/Weight: 5100 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core Pulling: x1 Euromap Vario

Manufacturer/Manufacturer: Arburg Typ/Type: 370C 800-250 Bau-year year: 2003 Control/Controller: Selogica Clothing kraft/Clamping Force: 800 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 34 mm Lifting volume/shot volume: 144 cc/132 gram hp Spez. Spray./injection pressure: 1820 bar General General Motor/Motor Power: 15 kW Heating/heating power: 8.6 kW Dimensions: 4.2 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap

Manufacturer/Manufacturer: Arburg Typ/Type: 420C 1000-350 Bau-year year: 1999 Control/Controller: Selogica Clothing Power/Clamping Force: 1000 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate's Platen Size: 650 mm x 650 mm WZ Einbauhoehe/Mould hight: min 225/275 mm Oeff-weg/opening stroke: 575 mm Plate distance max/Max. Open Daylight: 800/850 mm Snail/Screw size: 45 mm Lifting volume/shot volume: 206 cc/194 gram hp Spez. Spray./injection pressure: 1670 bar General General Motor/Motor Power: 18.5 kW Heating/heating power: 10.5 kW Dimensions: 4.4 m x 1.7 m x 2 m Weicht/Weight: 5100 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core Pulling: x1 Euromap

Manufacturer: Arburg Type: 570 C 2200 - 1300 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 2200 kN Tie bar spacing: 570 mm x 570 mm Plate size: 795 mm x 795 mm Tool height: min. 300 mm Opening distance: 650 mm Max distance between plates: 950 mm Screw: 60 mm Stroke volume: 664 ccm / 607 gram PS Injection pressure: 1450 bar General Motor: 55 kW Heating: 23 kW Dimensions: 6 m x 1,7 m x 2,1 m Weight: 8000 kg Screen text: German Additional equipment: Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMIN ...

For sale: an excellent condition, 2011 Atlas 350MH material handler. The machine has 12,600 operating hours and is powered by a strong 166 kW Deutz diesel engine. It is equipped with a fixed air-conditioned cab and a 13-meter boom reach. A 700-liter, 5-tine Atlas polyp grab is also included. Key features: Year of manufacture: 2011 Operating hours: 12,600 Engine: Deutz 166 kW diesel Boom reach: 13 meters Equipment: Fixed air-conditioned cab, 700-liter Atlas polyp grab

We are offering an x2 ATLAS COPCO ZR 400 7.5 compressor with the following specifications: Max working pressure: 7.5 bar Input power: 355 kW Rotational shaft speed: 1485 rpm Year of manufacture: 2014 Dqjny2 The compressors was removed from a company that ceased operations. It is in excellent condition and ideal for industrial use. Additional Equipment Included: The compressor comes with x2 Atlas Copco air dryer, Model: MD1000 W CE, featuring: Max working pressure: 10.5 bar Year of manufacture: 2014 We have Also: 1x Atlas Copco ZR 500 VSD 1x Atlas Copco air dryer All equipment is in excellent technical condition and ready for immediate sale. Please include your price offers directly when reaching out to us

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. Distinguished by its state-of-the-art solutions, the machine performs the machining process on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSolutions ATMS 1325 m ...

ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...

Skid with a triagi reactor manufactured by ATTP in stainless steel, model MTA-250, with agitation and a volume of 250 liters, and 2 lung tanks with agitation. The reactor engine has a power of 7.5 kW, and the tank engines 1.5 kW. Volume Total capacity 250 L Material 316/316L stainless steel Jacket or half-coil material To be determined Stainless steel Technical features Model MTA-250 Year of manufacture 2018 Equipment configuration Agitator Transport information Length 5000 mm Width 2300 mm Height 2820 mm Condition That's how it is Made by Unknown

AUERBACH AX3 TLF deep hole drilling machine was manufactured by the renowned German company Erste Maschinen Fabrik (ERMAFA Sondermaschinen- und Anlagenbau GmbH) in 2011. Characterised by its high reliability and performance, the AUERBACH AX-3 TLF machine used in the drilling of deep holes with high precision and tolerances in various types of metal, provides excellent optimisation of all aspects of the process and a significant reduction in cycle times. The machining process is fully automatic in 6 axes (X, Z, W, Y, B, A), making it capable of obtaining holes with a maximum diameter of 32 mm and a depth of up to 1700 mm. The AUERBACH AX 3 TLF deep hole machining centre is equipped with, among others, a 1500 x 100 mm interpolated rotary table and a user-friendly HEIDENHAIN iTNC 530 CNC control for programming all parameters of the process. The total weight of the drilling and milling m ...