used Direct current motors for sale

ABB MOTORS 3 ~ ENGINE M2AA 112 M CT. FIP: 55 3GAA 112001 - HAD 27,145 Number: 9680260510002 V Hz R/min KW A 440 60 1725 4.6 8.5

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

Item: Current Plug-In Unit ABB Marine Synpol D Model: CMA 40B Part No: GVT 360 8493 Condition: Unused surplus unit as good as New- With Open Box

Qty. 4 Second-hand DC motors Mfc.: ABB Type: DMI400R-DC motor Built: 2009 Power: 1250 kW-815 V-1591 Amps.- 1500 RPM

A 26.250 KVA ABB Generator GBA 1120 LD for sale. 135.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. 26,250 MVA ABB Generator GBA 1120 LD for sale. Brand: ABB Motors Type: GBA 1120 LD Number: 8266217 Voltage: 11,000 volts Power: 26,250 KVA Year of construction: 2000 RPM: 1500 rpm Weight: 43,400 kg

Soft starter ABB PST85-600-70 45kW/75kW Condition: new Technical characteristics Rated power of three-phase motor, inline, 400 V 45 kW Three-phase motor rated power, inside delta, 400 V 75 kW Design temperature of the operating environment without temperature compensation 40 °C Rated voltage Ue230 ... 600 V Design operating current Ie, 40 °C Tu 85 A Control supply voltage DC # V Control voltage type AC Transport weight - 11 kg

Qty.1 Second-hand cold rolling mill Mfc.: Achenbach, INNSE/MINO Type: 4-Hi Revamped: 2015 Strip width: 1500 mm Thickness Entry: 6.0 mm Exit: 0.3 mm Run-out table width: 1600 mm Rolling speed: 600 m/min. Motors Mfc.: Simemotori Fire Protection System Lubrication system

Air dryer suitable for 7,5kW compressors. Designed for use with Aflatek Screw10A and Screw10A-200 compressors. Technical data: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Air dryer suitable for 15kW compressor. Designed for use with Aflatek Screw20A compressor. Technical specifications: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Less powerful version of SilentPro100-3. Instead of 1100W motors, Silent100-3 has three 550W motors which still makes it very powerful for an affordable price. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek Silent100-3: Three 550W direct drive electrical motors. Anti-rust coating. Air filter on each pump. Low noise and vibrations level. Oil-free. Easily portable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 3x550(1650) Motor speed, Rpm: 1440 Air supply, L/min: 210 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 56 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 66 Tracking: Available  ...

High quality oil-free compressor, great for heating systems, workshops, service stations, spray painting and many other applications. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro100-3 230V: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 1Ph 230V Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 68  ...

Advantages of Aflatek SilentPro100-3: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions(length x width x height), mm: 1010x415x710 Weight, kg: 68 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro200-4: -Four 1100W direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 4x1100(4400) Motor speed, Rpm: 1440 Air supply, L/min: 960 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 83 Air tank, L: 200 Dimensions(length x width x height), mm: 1500x500x670 Weight, kg: 120 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1580x550x930 Weight, kg: 140 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free off ...

High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro300-6: -Six 1100W direct drive electrical motors. -Very large 300l air tank. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 6x1100(6600) Motor speed, Rpm: 1440 Air supply, L/min: 1260 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 85 Air tank, L: 300 Dimensions(length x width x height), mm: 1650x450x850 Weight, kg: 173 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1720x490x920 Weight, kg: 205 Tracking: Available -Price is with VAT 21% included. Contact us if you ...

Compact 50l compressor with two very powerful, silent direct drive motors. Designed for workshops, dental offices and other places where regular compressors are too loud. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek SilentPro50-2 2.2kW: -Two powerful 1100W electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 2x1100(2200) Motor speed, Rpm: 1440 Air supply, L/min: 420 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 80 Air tank, L: 50 Dimensions(length x width x height), mm: 700x340x600 Weight, kg: 38 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 715x365x650 Weight, kg: 43 Tracking: ...

8 up Thermal CTP Avalon N16–50 XT med MAL 3 kas. Punch system Bacher 780 Avalon N16, Jan 2010 MAL, Apr 2010 Elantrix 125, march 2009 Life time plates 278218 p Lifetime running 105212 h Actual running time 11096 h Exposure time 4647 h LD Status Reserve (U) 83 Current (U) 23 Reserve (L) 26 Current (L) 23 LD (U) replaced 25, march 2022 Under AGFA Service since installation Price: on request

AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

I sell a screw compressor with air dryer: AIRKRONE 25 SS + Dryer ES30. Powerful engine 18.5 KW / 25 HP 174 m3 / h / 2900 l/min Built in 1997. Approximately 20,000 moto hours. Made in Austria Everything works. Available equal, 2 pcs in stock. Possible also separately without air dryer cheaper to buy. Price by appointment.

Three separate oil coolers mounted in steel frame. Motors data: 380-420 / 660-720 V, 1460rpm, 11kW - 3 pcs

AKW Engineering Ltd Compact Spiral Freezers Currently building 4 bespoke compact freezers, using reconditioned top quality stainless steel framework. All belts are 510mm wide. Units are constructed on a hot dipped galvanised sub-frame, for easy transportation and relocation. All with new insulated enclosures and doors. Wiring and all serviceable components are new. All with built in belt wash spray bars. Choices of freezing capacities, evaporators and refrigerants.

ALDURO Combination Belt Grinder BS-100+ Specifications: Motor voltage 400 volts Motor power 0.7 kW Sanding belt size 100x1000 mm Grinding wheel dimension DxWxID 200x25x20 mm Speed 2850 min- Sanding belt speed 15 m/sec. Dimensions WxDxH 550x310x580 mm Weight approx. 29 kg Connection suction Ø 36 mm Shaft extension Buffing disc Grinding wheel Abrasive belt

Used decanter made by Alfa Laval, model: UVNX 314. Two motors: 7,5 kW and 3 kW. Parts in contact with the product in stainless steel. Max drum speed 3250 rpm. Documentation available. The machine was used for edible oil.

Stock# U2412-3 Unused progressing cavity pump by Allweiler type AEB 1E 200. Pump is driven via Nord gearbox and el motor 2.2 kW, 1445 rpm, 230/400 V, 50 hz. Pump works with rotation up to 150 rpm. Working output depends on product and rotation and can reach from 5 l/min, up to 500 l/min. At current rotation on gearbox pump can reach 60 l/min / 3600 l/h. Mounted on carbon steel base.

Material: Steel Engine: 37 kW Weight: 1,700 kg diameters: 10-60 (mikron) task: kg/h 1200-5000 Speed: max. min 1 2250 This machine is overhauled and like new. You can also get the entire system with all components.

old, but very good Alpine A 250 B mill, drive: 5.5 Kw., mounted on frame, with motor circuit breaker, ready for use. old, but very nice Alpine A 250 B Mill, motor 5.5 Kw., frame mounted, ready for use

Format saw Altendorf Type: F 45 Year of Make: 1989 Sliding carriage length 2800 mm Saw blade swivel 45° With scoring Extraction hood above the saw blade including wide extraction hood for 45° cuts and narrow hood for 90° cuts Angle stop on the sliding carriage Motor power 5.5 kW Scoring motor 0.75 kW Cutting width to the right of the saw blade 1050 mm With table extension With table extension Saw blade diameter maximum with scorer 350 mm max. saw blade diameter 400 mm without scorer Cutting height at 90° maximum 130 mm Cutting height at 45° maximum 90 mm Saw shaft speed 3000/4000/5000/6000 rpm. Extraction connection via saw blade diameter 80 mm Suction connection bottom diameter 120 mm Length stop with magnifying glass with roller support Weight: approx. 1200 kg

With scoring machine G9rbd8z7f Slot 3100 mm right slot 1250 mm Carriage length 2800 mm Motor power 5.5 kW Power of the counter saw motor 0.75 kW Hydraulic turning of the saw, lifting You can call or write to us. We can speak and write German and Russian. You can also send messages in English 38.2.1

Sliding Table Saw Sizing Saw Make Altendorf Type: F 90 Machine No. 73-4-144 Year of construction: 1973 Sliding carriage length 3000 mm Motor power 5.5 kW Extraction hood from above With scoring machine Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge, without scoring 500 mm Maximum cutting height 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm 4 speeds adjustable via straps Suction connection diameter approx. 80 mm and 120 mm Saw blade not swivel Weight with pallet 815 kg Dimensions 3000 mm x 3000 mm x H 1500 mm ...

Sliding table saw Altendorf Type F90 Machine No. 66-9-135 Sliding carriage length 2200 mm Cutting width 800 mm Motor power 5.5 kW Flat belt drive, 2 speeds Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Packaging dimensions approx. 2200 mm x 1400 mm x H 1500 mm Weight approx. 855 kg

General: Travel X/Y/Z 800/800/600 mm Speed 18,000 rpm Tool holder HSK 63 Spindle: Motor spindle technology Speed 18,000 rpm Tool holder HSK 63 NC swivel rotary table: A-axis +/- 120° Technology Direct drive (2x torque motors) C-axis 360° Technology Direct drive (1x torque motor) Clamping surface 630 mm Table load max. 1,000 kg Tool magazine: Technology 2x chain magazine Tool Changer Pick-Up Number of stations 66 (2x 33) pieces Equipment / Accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system, 40 bar Tool Measurement Tool Probes Workpiece Measurement Infrared Probes Emulsion Mist Separator Mechanical Setup operation Electronic handwheel

General: Control Heidenhain TNC 640 Travel X/Y/Z 650/650/500 mm Speed 12,000 rpm Fault circle swing bridge 800 mm Rotary function 800 rpm, 300 kg Spindle: Motor spindle technology Speed 12,000 rpm Tool holder HSK-T63 Spindle clamping rotation function NC swivel rotary table: A-axis +/- 120°, 0.001° resolution Drive tandem, 2x torque motors C-axis 360°, 0.001° resolution Drive 1x torque motor Clamping surface 470 mm Rotary function 800 rpm Table load max. 300 kg (500kg) Tool magazine: Technology Chain Magazine Tool Changer Pick-Up Number of stations 63 pieces Equipment/ Accessories: Rotary function 800 rpm Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system, 40 bar Tool Measurement Tool Probes Workpiece Measurement Infrared Probes Emulsion Mist Separator Mechanical Setup operation Electronic han ...

AMADA VIPROS 255 (2001) punching machine Ready for transportation and installation Maintenance and disassembly carried out by AMADA technical service Hours: 31,000 Capacity: 200KN Travel method: X and Y axes move the sheet, C axis for Auto-Index, T axis for the turret Control method: X, Y,T & C simultaneously, 4 axes control Driving Motors: FANUC AC Servo (X,Y,T,C,) Maximum sheet size: 1270 mm (Y) x 1270 (X) mm With 1 reset: 1270 mm (Y) x 2540 mm (X) Maximum axle travel: 1270 mm (Y) x 1270 mm (X) Maximum axes speed: X + Y = 82 m/min Punching precision: +/- 0.07 mm Repeatability: +/- 0.03mm Turret rotation 30 rpm: Bi-directional Number of stations: 31 Auto-Index Number: 3 Maximum hole diameter: 88.9 mm Blows per minute: 1000 1mm steps. 520 8mm pitch. 340 25mm pitch. Maximum punching thickness: 6 mm. (9 mm. with special jaws) Maximum sheet weight: 110 Kgs.

Kahl Mixer Continuous Mixer Conditioner for Pellet Press Gr.3 used Manufacturer: Amandus Kahl Model: Gr.3 / Gr. III with drive motor ABB motors 380/660 V; 1470 rpm; 30 kW. For continuous conditioning, mixing of bulk materials with fissics as dosing for pellet presses . Use: - For continuous mixing of feed with liquids and steam - For melasses dry chips - In general process technology for moisturizing granular / powdery substances - General: for (all) mixing tasks in which liquids must be entered into solids Tech. Information Manufacturers - Total length approx. 2964 mm - Diameter approx. 550 mm - Total height approx. 900 mm - Distance inlet/outlet (center/middle) approx. 1950 mm - Inlet/output approx. 300x300 mm - Weight approx. 800 kg + motor approx. 245 kg Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

Attachment: Chamber filter press used semi mobile Model: pilot plant on platform mounted Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 20 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Filter surface: approx. 4.72 m m² Presses contents: approx. 56 dm m³ PCB package length: 1024 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Pumps: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Condition: It is a complete semi-mobile system on platform mounted, incl. control cabinet as full drainage system. This compact drainage system is easy to transport and can be taken in a very short time in operation. Appendix: Selling without trailer You want to rent this fac ...

Brand: APV Gaulin Type: MC 45-5TPSX capacity: 7.500 l / h current pressure: 345 bar Stages: 1 stage Dimensions: 215 x 152cm x 160cm (Lxwxh) YOM: 1982 Engine: PLS 280M; 90KW; 975 r/min; 380 V; 176 amp; 50 Hz

Used homogenising Brand: APV Rannie capacity: current on 6.000 l / h Engine: 37 kW Stages: 2

IntNr231085 AR FILTRATIONI S.R.L. ARNO 2 series extraction: Air purifier mechanical AR 5-stage for emulsion mist/oil smoke Air capacity 2600 m3/h (1.5kW) Voltage Frequency 230/400 50 V Hz Noise level dBa approx. 70 Stage 1- Centrifugal condenser, self-cleaning Stage 2 - Knitted metal filter, washable Level 3 - Pocket filter Stage 4 - Fine filter mat, washable Stage 5 - Hepa ultrafine filter Total Unit Filter Capacity: up to 99.97% • Quick and easy maintenance, 1 time per year, high operational reliability • Robust design, small space requirement • Recovery of up to 80% of the condensed coolant • Design and function in accordance with current standards • Energy savings of approximately 415.00 euros per air purifier • Reduction of emissions of 9,000 kg CO2/year/plant • Protection of the sensitive parts of the WZM • Protects the environment and people  ...

Awaiting refurbishment is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 f ...

Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ni ...

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...

JL 270 | WRAP-AROUND ATLANTA Year: 2015 Speed: 15 pz/minute Model: raffaello Type: for boxes or trays Workable formats: currently for bottles 0,25 l, 0,50 l 4 packs/tray in 3x4 for 0.25l bottles 4 packs/tray in 2x3 for 0.50 bottles Safety protections

SCREW COMPRESSOR GA 18 + 7.5P Serial Number: 272265 Hours: 197 Hours By integrating Atlas Copco's GA compressors directly into the production area, a reliable flow of compressed air directly to the job site is ensured. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. The GA compressors are designed to offer the highest efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally completely piped and wired compressor, single-stage oil-injected, compressing, air-cooled, soundproofed. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Compressor control system Elektronikon II Specifications Manufacturer: Atlas Copco Type: GA 18+ 7.5P Screw compressor Max. operating pressure: 7.5 bar  ...

SCREW COMPRESSOR GA 18 + 7.5P Serial Number: 272262 Operating hours: Only 1 hour of operation By integrating Atlas Copco's GA compressors directly into the production area, a reliable flow of compressed air directly to the job site is ensured. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. The GA compressors are designed to offer the highest efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally completely piped and wired compressor, single-stage oil-injected, compressing, air-cooled, soundproofed. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Compressor control system Elektronikon II Specifications Manufacturer: Atlas Copco Type: GA 18+ 7.5P Screw compressor Max. opera ...

SCREW COMPRESSOR GA 18 + 7.5P Serial Number: 272261 Hours: 1492 Hours By integrating Atlas Copco's GA compressors directly into the production area, a reliable flow of compressed air directly to the job site is ensured. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. The GA compressors are designed to offer the highest efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally completely piped and wired compressor, single-stage oil-injected, compressing, air-cooled, soundproofed. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Compressor control system Elektronikon II Specifications Manufacturer: Atlas Copco Type: GA 18+ 7.5P Screw compressor Max. operating pressure: 7.5 bar ...

ID2932 Atlas Copco ROC L6-44 year/Year of construction 2007 approx. 11860 hours/hours 21 t Blast hole drill, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, many accessories optionally available (drilling tube 89 x 5000 mm, Mincon 3.5 MP35 down-the-hole hammer, ballistic drill bit D105 etc.), optionally with spare parts dispenser machine ( Engine damage), year of construction 2001 Blast hole drilling rig, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, optionally many accessories available (drill pipe 89 x 5000 mm, down-the-hole hammer Mincon 3.5 MP35, drill bit D105 ballistic etc.), optionally with spare parts dispenser machine (engine damage), year of construction 2001