used Dryers for sale

EVERDRY Absorber for Compressed Air DN600 x 1700

The machine is still in operation and can be visited.

Used fluidised bed dryer mady by Buhler model OTWG-280, new 1996. The dryer consists of a blower, piping. All elements are made of acid-resistant sheet metal, the blower is resistant to high temperatures. The whole set is manufactured by Buhler. Technical data: - Weight 1750 kg - Content m³: 6 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.

Eliog KU 200 - 15 - 10 - 10 Drying oven - Forced Air Batch Furnace Temperature range: 70 - 200 C Air flow: horizontal. Heating performance: 36 kW. Connected load: 38 kVA. Rated voltage: 3 x 400 V / 50 Hz / PE. Type of protection: IP 54 / IP 20 (heating). Acoustic emission: 70dBA. Door leaf 2 . Mean velocity in the processing chamber: 0,5 ... 0,75 m/s. Weight: 750 kg. Processing chamber features - 1 pair of recessed floor rails, rail gauge 600 mm - 1 pipe duct DN 25 on the left side - shutter wall on the left side - rope pull switch for door release. Processing chamber dimensions: H1500 x W1000 x D1000 mm. External dimensions: H2408 x W1889 x D 1443 mm. Switch cabinet mounting with telescopic rails. On stock 3 pcs ready for delivery.

Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Hüttlin (Syntegon) Pilotlab L is a state-of-the-art fluid bed processor designed for pilot-scale applications, bridging the gap between laboratory development and full-scale production. Engineered for efficiency and flexibility, this system supports multiple processes, including drying, granulation, and coating, all within a single processing unit. Key Features & Technical Details: • Batch Capacity: Accommodates batch sizes from 4 kg to 50 kg, offering versatility for different production needs. • Multi-Process Capability: Designed for drying, granulating, and coating within the same chamber to optimize efficiency. • Innovative Airflow Design: Equipped with an advanced air distribution system to ensure even airflow, resulting in uniform product quality. • Precision Spraying: Features three-component spray nozzles that provide controlled spray rates for consistent coating an ...

Dehumidifier Munters 690 E see pictures very good condition, ready for use

Manufacturer: GEA / Niro Atomizer and APV Anhydro Feed capacity (skimmed milk): 1428 kg/h Water evaporation capacity: 725 kg/h Bag filter: Intensive filter IFJC 97/1-3 RT Air heating: BRUNNER heat exchanger (steam) Atomizer: GEA / Niro Atomizer F35 (disc atomizer) Vibrofluidizer: Anhydro

Used spray dryer by ProCepT. Model SD1. Year of construction 2017. Dryer made in ATEX: EX II 3G. The ProCepT SD1 spray dryer is designed for formulation and process development as well as small-scale clinical production. The device enables spray drying of samples with a capacity of 0.5 ml to several liters. The equipment is used in preclinical and clinical applications with the ability to continuously process water in the range of 0.1-15 ml/min (0.01-11/h) (higher for organic solvents), with typical batch sizes from 100 mg to several kg dry product. The operator can monitor and control every critical process parameter using a computer with a touch panel. The software provides complete data recording with tracks. During the process, there is a negative pressure in the process column. The dryer uses a nitrogen recirculation system to process larger amounts of solvents. Solvents ar ...

REFAKT Dryer/Centrifuge/Dry Cleaner Previously used for centrifugal drying of plastic waste. Throughput capacity 300 to 1000 kg/h depending on the type of plastic and wall thickness Drive power 30 kw

Vacuum drying oven from a liquidation. The drying oven is made entirely of stainless steel on the inside and allows drying under vacuum up to 1mbar (depending on the drying material and the pump connected). External heating is provided by a thermal fluid (water, oil). The heating circuit is absolutely tight, various attachments and flanges are available. The dryer was used to dry wood chips and is therefore not contaminated. The location of the device is Traben-Trarbach. Inspection possible, delivery in a radius of 200km possible by arrangement, otherwise only pick-up. Specifications: Boiler room capacity 630 litres, boiler room dimensions 780x1050x890mm³, number of heating plates 8, plate dimensions 730x1000mm², usable height between plates 85mm, 1 door with gasket Manufacturer Conrad Tschokke AG Winterthur Switzerland, year of construction 1970, complete original construction dr ...