used Gang saw systems for sale

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

1 used ACM STAR 700 Vertical Bandsaw New in 2015, as is where is Including Transportdevice

The Aerzen blower unit, which was manufactured in 1986, is a reliable and powerful solution for various applications. With an operating pressure of 1.05 bar, it provides the necessary compressed air for industrial processes, ventilation systems or other applications. The blower unit has been carefully manufactured and is characterized by its durable construction and efficient performance. It is designed to generate high airflows while maintaining stable operating pressure. We would like to assure you that we can offer you the best possible price for this blower unit. The price is negotiable, so we can respond flexibly to your requirements. If you would like more details about the blower unit or have any questions, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries promptly. Contact us today to learn more about this Aerzen blower  ...

Machining center in continuous flow Usable width 1300 mm Working Dimensions X:4200 mm / Y: 1300mm / Z: 60 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1Saw Blade) Working Speeds X: 100m/min / Y: 100m/min - Z: 20m/min 5.5 Kw I 7.50 HP ISO 30 HSD Spindle Motor Panel Handling with Double Clamping System (Independent Servo Control) Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 3.500 kg

Machining center with drilling group without milling unit Working Dimensions X:Unlimited / Y: 950mm / Z: 70 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1 Saw Blade) Working Speeds X: 70m/min / Y: 70m/min - Z: 20m/min Panel Handling with Single Clamping System Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 1.450 kg

Continuous cnc with drilling unit and also electrospindle for milling work Working Dimensions X:Unlimited / Y: 950mm / Z: 70 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1 Saw Blade) Working Speeds X: 70m/min / Y: 70m/min - Z: 20m/min 5,5 Kw I 7.50 HP ER32 Manual HSD Spindle Motor Double Sided Air Flotation Working Table Piece Verification System with Laser Weight (Approx.) 1.500 kg

Working Dimensions 4200 x 4200 mm Cuttin Depth 75mm - Projection 90mm (18mm4PCS) 11kW I 14.75 HP Main Saw Motor 1.5kW I 2 HP Scoring Saw Motor Pneumatic Controlled Saw Carriage Up/Down Movement 80m/min Saw Carriage Cutting Speed Max. Cutting Blade Diameter 380mm Max. Scoring Blade Diameter 200mm 8 Pcs Holder Quantity Air Floating Table (4 Pcs) - 1 Fixed, 3 Movable

High quality oil-free compressor, great for heating systems, workshops, service stations, spray painting and many other applications. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro100-3 230V: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 1Ph 230V Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 68  ...

SECOND-HAND BAND SAW AGAZZANI NRA

2 Thermal VLF Systems: 1 x AGFA Avalon VLF A xxt year : 2006 5000 paltes with new Laserhead AGFA VLF Platemanager with AGFA Elantrix 150 Onlineprocessorwit transit table to the oven. with Haase oven OG15FU with transit table to gum unit withGum unit RSH with explanation table Price: on request 1x AGFA Avalon VLF A xxt year : 2006 Price: on request

ATS 400A AC-21 12V 251 kVA 4P Total power 251 kVA Nominal current: 400 A System voltage 12V Controller: ComAp Inteli ATS NT PWR Switch: Socomec ATyS r 4P, 400A Max cable connection cross-section: 2 x 185 mm Case dimensions: width 600 mm, height 1150 mm, depth 420 mm. Weight: 81 kg Shipping possible if costs are covered! The General Terms and Conditions of Business, Delivery, Payment and Installation of Aggretech GmbH shall apply exclusively) Art.-No.: 5056

Used homogenizer AK SYSTEMS, type: Hydro Grind laboratory system 50 liters For the production of liquid to medium-viscosity emulsions, dispersions or suspensions - Laboratory equipment with a capacity of 50 litres - All-in-one solution for food, cosmetics, chemicals and pharmaceuticals - Enables easy introduction of solids into liquids - Allows homogenization into a fine droplet structure - Vacuum container - With double jacket for heating or cooling (2 bar) - Maximum temperature in the container: 95°C -Vacuum pump - Connection: 400 V, 50 Hz, 3Ph, 8.0 kW - Weight: 120 kg (without control cabinet) - Condition: Good, ready to use Visits and test runs are possible by arrangement.

We sell 140x Alcatel-Lucent IP Touch 4038 extended edition Ice Blue telephone system 1x Alcatel-Lucent IP Touch 4038 extended edition Black telephone system 1x Konftel 300IP PoE (with PSU) conference system 4x Konftel 300IP PoE (without PSU) conference system 6x Alcatel Lucent OmniPCX Enterprise Small 3EH76020AEJD telephone platform, (each w/ Alcatel OmniPCX MIX 4/4/8 and 1x Alcatel OmniPCX GD-3 Gateway driver) 1x Alcatel Lucent OmniPCX Enterprise Small 3EH76020AEJD enclosure (empty) 3x Alcatel Module OmniPCX BRA2 ISDN Access-T0 expansion board 5x Alcatel Module OmniPCX PRA-T2 ISDN Access-EI expansion board 1x Alcatel Lucent Call Server Processing Unit CS-2 expansion board 1x Alcatel OmniPCX MIX 4/4/8 expansion board 1x Alcatel OmniPCX GD-3 Gateway Driver expansion board In most cases, the entire item can only be handed in completely. More information on r ...

Product number: 2931 Type: 1000 Serial number: 8000531108E1E075 Year of construction: 2008 Size: 1 trolley Heating: electric Power: 3 x 400V, 50Hz Dimensions: 1550 x 2050 x 3000 mm Including smoke generator for sawdust and generator for blocks

Allgaier Screening Machine | Vibrating screen type ARSM 33-10 Refurbished (workshop overhauled) - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: refurbished - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and struts are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibr ...

Siebmaschine Vibration classifier workshopoverhauled Make: Allgaier Type: ARSM 33-7,5 Screening area: approx. 7.5 m² with 3 fractions Screening capacity: approx. 80 - 100 m³ / h with 3 fractions (for wood chips and sawdust) Drive power: 5.5 kW Suitable for the following screening materials: -Wood chips -Sawdust -Sawdust - Reclaimed wood -Bark # Screening machine oscillating screen workshop reconditioned Make: Allgaier Type: ARSM 33-7,5 Screening area: approx. 7.5 m² with 3 fractions Screening capacity: approx. 80 - 100 m³ / h with 3 fractions (for wood chips, sawdust) Drive power: 5.5 kW Suitable for the following screenings: - Wood chips - Sawdust - Sawdust - waste wood -Bark

Type: SPF10R56G8.3-W20, Nr: Q.5007779 , 6 bar, 0,57kw, 12mm²/s, 33.27 l/min BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Manufacturer: Almab Production year: 2003 Try sorting with 6 pockets Speed: 15 layers per minute Max leght boards 6000 mm Pack 1200X1200X6000 mm (max hight 1400) Max thickness 100 mm infeed conveyors separator turbo separator end milling units left and right feeding chain conveyor measurement scanner roller conveyors board turner to pockets outfeed after pockets one piece feeder three saw trimmer stacker with double packing arms stick cassettes outfeed conveyors pack press Fromm plastic wraping system package stacking machine

this plant is regularely modernized and actual state of the art with all systems meeting our highest standards. The plant is ready for opereation and was closed only due to political reasons to close all coal fired power plants. 200 MW steam turbine: - Construction year 1990 - Extr. Condensing turbine - Manufacturer - Life steam pressure 180 bar - Life steam temperature 525 °C - Power rating 200 MW It needs a quick decision for a new home.

Code: 0724 Brand: ALTENDORF Model: F 45 - CE Standard Panel saw with tilting blade and scoring unit for cutting panels in wood, melamine, plastics, upholstery, aluminium, non-ferrous metals - CE Standard Technical data: Carriage length mm 3800 Max blade diameter mm 400 F30 Cutting height at 90 degrees mm 125 Cutting height at 45 degrees mm 88 Motor power Kw 5,5 Scoring unit - Kw 0,75 electrically adjustable Hydraulic lifting and tilting by foot pedal N° blade rpm 3000/4000/5000/6000 Digital display of parallel fence cutting width Guide for inclined cuts Double motor ignition station Suction mouths: N° 1 mm 120 - N° 1 mm 80 Overall dimensions of assembled machine mm 3800 x 3500 x 1500 h Overall dimensions for transport mm 3800 x 2100 x 1500 h Weight kg 1000

CIRCULAR SAW model ALTENDORF F45 with 2 axes by CNC second hand machine in excellent working condiiton CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control electric movements of scoring unit , from the control panel technical data : anodized aluminum carriage mm. 3000 max.diam. blade ( with scoring blade ) mm.350 max.diam. blade ( without scoring blade ) mm. 450 blade rotation speed g/min.3000/4000/5000/6000 with scoring unit : Yes blade group inclinable at 45° cutting width on the parallel guide mm.1350 main saw blade . motor power 7.5 Hp scoring unit motor power Hp 1 machine equipment: aluminum telescopic rod n.01 DIGIT L digital disp ...

CIRCULAR SAW Mod ALTENDORF F45 machine suitable for cutting plastics and solid wood CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3400 max. blade mm.500 blade group inclinable at 45° max. cutting height with 90° blade = mm.175 max. cutting height with blade at 45° = mm.123 saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended bridge protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1100 Volt. 380/50 Year 2003

Capacity round maximum diameter: 530 mmAngle degrees maximum: 90Capacity square: 10000 mmWorkpiece height: 1 mmWorkpiece width: 1 mmCapacity rectangle: 1 mm Band saw AMADA - HFA 530 A Automatic kerf compensions MultipleJob  Feed selection Double column guidance Adjusting doiuble wire brushes Return conveyor with lane changer Capacity 90°:       530 x 530° Feed single stroke: 10 mmmm Feed multiple stroke:10000 mmmm Cutting speed Vario:15 - 120 M/Min Circle blade size:  6670 x 67 x 1.7mm Power:              7.5kW Length:             3015mm Width:              1900mm Height:             1900mm Weight:             6300kg

Hydraulic Horizontal Band Saw AMADA H 650 HD Year of construction: 1998 Blades dimensions: 5040 x 38 x 1,4 mm Cutting capacity: Ø 405 mm Square cutting capacity: 400 x 400 mm Cutting capacity at 45°: 560 x 305 mm Cutting capacity at 90°: 635 x 405 mm Maxi jaws opening: 650 mm Jaws height: 280 mm Cutting angle: from 0 to 45° Motor power3,7 kW Auto descent Hydraulic angular rotation Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 3000 mm Height in high position: 2400 mm Height in low position: 1800 mm Weight: 2,5 T

Height under guides: 90 mmThroat: 0 mmTable length: 400 mmTable width: 400 mm Make  Amada HA 4 Type HA 400 Year 1982 Bandsaw automat Capacity round max. diam.Cap = 400 x 400 Angle degrees max.Speed = 15 - 90M Type machine: Vert./Hor.Power 5.5 kW Workpiece height (mm) Chip conveyor Workpiece width (mm)Load = 2500 kg Capacity rectangle (mm) 90 Gr. Cutting Capacity square (mm)Bundel clamp Managing the cycle of automatic travel included various lengths in the same quantity cycle Control of pressure and cutting speed Pressure regulation of vice clamping Screw chip conveyor Coolant system  

Bandsaw with feeding system. machine old but in very good condition complete with electrical cabinet. One roller as spare.

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5 - 16 Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out an ...

2 round built, endlessly leading upwards, Spiral conveyor systems for crates and cartons. Manufacturer Apollo VIS Type spiral conveyor 162020 Equipment: 1000038 ICH Assembly: 990800431 Achievable height for carton discharge: 2,600 mm 2 round built, endlessly leading upwards, Spiral conveyor systems for trays and boxes. Manufacturer Apollo VIS Type spiral conveyor 162020 Equipment: 1000038 I assembly: 990800431 Achievable height for carton discharge: 2,600 mm

We sell List of 450 x iPads and iPhones 4/5/6/7/8 This will be available in 2 weeks. In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurb ...

Machine number: 2022-548 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 4BTA3.9-G11 Rated Power: 77KvA Continuous power: 70KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. L234 Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup error  ...

Machine number: 2022-565 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers Specifications: producenter:Atlas Copco Condition: ( very good ) Model : QAS150 Condition: ( very good ) Engine : Volvo Penta 6cylinder Terbo diesel water-cooled. Power : kw/120/KVA 150 RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Operating hours : approx. 10400h Year built:2007 Shuro - CEE 16 A 1× 400 V - CEE 32 A 1× 400 V - CEE 63 A 1× 400 V - CEE 125A2 400v -Precaution - Length 3.35mm - Width 1.20 mm - Height 1,70 mm/2500Kg - Complete with control Incl. diesel tank in the base frame Immediately ready for use Delivery nationwide possible for an extra charge Adam Power Systems GmbH Power generator of all kinds Werkstraße 16, 24848 Kropp

Used lab homogeniser from Axomatic model MINIMIX 5 Lt. New 2015. Technical specifications supplied for the MINIMIX 5 Lt: Tank: - Type: vertical cylinder with flange - Bottom: cup-shaped bottom welded to the cylinder - Lid: cup-shaped welded to the flange with integrated silicone gasket, liftable - Jacket: with cup-shaped bottom, surrounding the tank - Insulation: on tank, made of mineral wool, surrounded by welded sheets Capacity: - Total: 6 litres - Working: 5 litres - Minimum: 1.5 Litres Materials: - Tank: AISI316 internally polished - Bottom: AISI316 internally polished - Lid: AISI316 internally / externally polished - Jacket insulation: AISI304 polished - Parts in contact: AISI316 internally polished - Frame facings: AISI304 satin-finished scotch brite type - Scrapers: TEFLON movable Operating conditions: - Tank: full vacuum / atmospheric pressure ...

Qty. 1 Second-hand H-Beam production line Mfc.: Production Line: B&K Welding Machines: THERMATOOL Saw Cutting: LINCOLN Driving Part: Seoho Electric Drive: PAKER PLC: MITSUBISHI Leveller: FLATTENER Press cutter & DDS: Samyang Run-out Table: Wuchang Production range: No. Class Width (mm) Thickness (mm) Length(M) 1 Web 53 ~ 450 2.3 ~ 12.0 6.0 ~ 18.0 2 Flange 50 ~ 300 3.0 ~ 12.0 Capacity: 60,000 MT/annum Equipment total weight: approx.139 MT First installation: 10/1973 Type: Welding H-Beam Facility Welding Type: Electric Resistance Welding Cutting type: Cut-Off Saw, Presscutter Line Speed: Max. 37 m/min.

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Vacuum reactor model BACHMIX with a total capacity of 340 liters, manufactured by BACHILLER. Mounted on a stainless steel structure. Hydraulic system for lid lifting. Equipped with three agitation systems: Anchor-type agitator with Teflon scrapers + two two-blade axial turbine propellers at different heights Cowless agitator Turrax agitator Volume Total capacity 340 L Material 316/316L stainless steel Technical features Model BAXHMIX PC200 Vessel working pressure -1 bar Vessel working temperature 140 ºC Half-coil/jacket working pressure 2.5 bar Half-coil/jacket working temperature 140 ºC Half-coil/jacket volume 56.6 L Equipment configuration Jacketed Electrical panels Dimensions Inner diameter 800 mm Shell height 620 mm Transport information Length 2450 mm Width 1350 mm Height 1950 mm Documentation CE Certificate Operation Manual Drawi ...

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA machine for joining parts of chairs, living rooms, furniture, etc. the FTA machine is made up of 3 automatic operating units : 1st unit : circular saw for cutting workpieces to length 2nd unit : spindle moulder for milling with hydraulic sliding carriage 3rd unit : drilling unit with multiple center distance head . there are 9 work programs that can be selected and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 . hydraulic sliding carriage - Boring unit . engine power Hp 3 . max. depth drilling mm. ...

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI I2F machine for chairs composed by 3 working units : - circular saw diam. mm.350 motor power hp 3 - boring unit boring head with 5/7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 - vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage machine composed by 3 working units : 1) circular saw for cutting to length of pieces 2) boring unit equipped with multi bit drilling head 3) vertical spindle for moulding the machine may be used for a variery of job requirements , including the end cutting off , moulding curved surfaces and boring end cutting , or end cutting off amd moulding for finger jointing , or end cutting , etc.

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI IF Special machine for chairs automatically cuts and bores all type of parts of chairs and furniture components . composed by : - circular saw diam.mm.350 motor power hp 3 - boring unit ( boring head with 5/7 mandrins ) motor power Hp 3 max. working stroke of boring unit mm. 130 net weight kgs.400 Volt. 380/50

BALESTRINI TEAM automatic CUTTING , END MILLING and DRILLING MACHINE machine for joining parts of chairs, living rooms, furniture, etc. the TEAM machine is made up of 3 operating units: 1st unit: circular saw for cutting workpieces to length 2nd unit: spindle moulder for milling 3rd unit: drilling unit with multiple center distance head . there are 9 work programs that can be choiceed and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . all units are operated by a hydraulic pump to obtain adjustable and smooth movements Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 - Boring unit . engine power Hp 3 . max.  ...

EIAA x BATES :: Certified Preowned We can offer you permanently revitalized filling systems for all areas of application. OFFER: BATES filling line for valve bags (valve packers, air packers) with internal or external valve, made of paper or PE. Machine was completely overhauled in 2024: New pneumatics New electrics New control cabinet with new components, e.g. control system (Siemens LOGO!) - manufacturer-independent New software - manufacturer-independent New weighing electronics (B+L dataPond 3F, high-speed, legal-for-trade) Parts made of stainless steel that come into contact with the product (product flap, pressure chamber, filling tube) Filling tube for 135mm valve width - conversion to other valve width possible Product pre-container with load-bearing frame / stage included Pressure pump included Engineering New - Schematics, Diagrams and  ...

Stock No.: 503007 Manufacturer: BATTENFELD Type: HM 10000-9200 Control: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing page Clamping force: 10000 kN Holmass v: 1120 mm Holmass h: 1400 mm Panel size h: 1960 mm Panel size v: 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm plate pitch: 2120 mm Opening distance: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering fixed plate D: 315 mm Technical data spray side Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11370 N Plasticizing current: 144 g/s PS Injection flow to the outside: 1144 g/s hp Number of heating zones: 8 Nozzle travel: 700 mm Dimensions & Weight Machine dimensions LxWxH: 11.6m x 2.9m x ...

TECHNICAL DATA Net weight: Kg 1330 Length: mm 2400 Width: mm 1550 Height: mm 1870 Voltage: Volt 230/400 Power: Kw 4 Frequency: Hz 50 PRODUCTION CHARACTERISTICS Production up to 48.000 vials/h Min. height vial: 20 mm Max. height vial: 140 mm Min. diameter vial: 7,5 mm Max. diameter vial: 36 mm Pressure: 2 bar The ESA series labelers apply self-adhesive labels from the reel to bottles and vials, cartridges and other unstable containers. All electrical, electronic and PLC components are integrated into the machines to save space. These continuous motion labellers have an extremely compact design. The label dispenser has a modular design and can be equipped with both intermittent motion and continuous motion printing systems. For added convenience and reliability, the functionality of the label dispenser can be enhanced by a number of additional controllers and wor ...

On offer are three Biomek systems by Beckman Coulter; two i5 and one i7 system. We also have a Class II enclosure (BioMAT2 Robotic by Contained Air Solutions) for housing one of the i5 machines. The machine's configurations are as follows: BIOMEK i7: Hybrid configuration with one 96-channel 1-300μL pipetting head and one span8 pipetting head that can be operated in either 5-1000μL pipetting mode or in continuous dispense mode. This unit also includes a roof-mounted HEPA unit. first BIOMEK i5 comes with a 96-channel 5-1200μL pipetting head, a side cabinet and an integrated thermal microplate sealer (PlateLoc by Agilent Technologies) and various deck-position units such as a positive positioner, an orbital shaker, and a peltier element. The second BIOMEK i5 has one Span8 pipetting head, which can be operated in either 5-1000μL pipetting mode or in continuous dispense mod ...

For sale we offer a measuring and weighing system for packages from Bedal. It is a perfect system for all package acceptance or shipping. It can be used for example.B: In shipping at industry, wholesale or e-commerce, fulfillment service providers (e..B. forwarding agents, logistics), or at parcel reception points (e.B. courier services). Package dimensions: Min. BxWxH 10x10x4 cm Max. BxWxH 43x41x48 cm undressed max: LxWxH 75x41x48 cm Tolerance: LxWxH 1.0 x0.5 x 0.5cm Weight: 0.25kg: 0.05Kg (50g) / 25-32kg : 0.075kg (75g) Parcel Kiosk is an economical solution for weighing and dimensioning packages. It is certified by the international organization OIML. Automating packet measurement improves efficiency and saves resources. Thanks to the Parcel Kiosk system, you can be sure that accurate weight and dimensions are read and that your company is protected from errors an ...

EIAA x BATES :: Certified Preowned We can offer you permanently revitalized filling systems for all areas of application. OFFER: Behn+Bates filling line for valve bags (valve packers, air packers) with internal or external valves, made of paper or PE. Machine was completely overhauled in 2024: New pneumatics New electrics New control system (Siemens LOGO!) - manufacturer-independent New software - manufacturer-independent New weighing electroni (B+L dataPond 3F, high-speed, legal-for-trade) Parts made of stainless steel that come into contact with the product (product flap, pressure chamber, filling tube) Scissor Locker - Conversion to BATES Flap Dosing Possible Filling tube for 135mm valve width - conversion to other valve width possible Everything new except for steel construction - steel construction powder-coated in the colour of your choice on  ...

Capacity round maximum diameter: 1 mmAngle degrees maximum: 1Capacity square: 1 mmWorkpiece height: 1 mmWorkpiece width: 1 mmCapacity rectangle: 1 mm Band sawBEHRINGER - HBP 313 A MACH-ID 9038 Make: BEHRINGER Type: HBP 313 A

Capacity round maximum diameter: 260 mmAngle degrees maximum: 400Capacity square: 0 mmWorkpiece height: 0 mmWorkpiece width: 0 mmCapacity rectangle: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat Bandsaw  Angle L / R Degrees   L + R Cutting capacity 90 ˚ Ø260 mm Cuttting capacity 90 ˚ Flatt  260 x 400 mm mm  

Capacity round maximum diameter: 1 mmAngle degrees maximum: 1Capacity square: 1 mmWorkpiece height: 1 mmWorkpiece width: 1 mmCapacity rectangle: 1 mm Band sawBEHRINGER - HBE 321 A DYNAMIC MACH-ID 8917 Make: BEHRINGER Type: HBE 321 A DYNAMIC Control: Behringer TOUCH Year: 2017 Capacity 90°:      320° Cutting flat 90°:  350 x 320mm Feed single stroke:650mm Min. cutting length:70mm Cutting speed Vario:15 - 110 M/Min Circle blade size: 4440 x 34 x 1,1mm Power:             3,7kW Chip conveyor:     Yes Length:            2500mm Width:             2000mm Height:            1900mm Weight:            2000kg

Capacity round maximum diameter: 1 mmAngle degrees maximum: 1Capacity square: 1 mmWorkpiece height: 1 mmWorkpiece width: 1 mmCapacity rectangle: 1 mm Band sawBEHRINGER - HBP 530 A MACH-ID 8915 Make: BEHRINGER Type: HBP 530 A Year: 2001 Capacity 90°:      530 x 530° Min. cutting length:40mm Max. sawing:       17 - 110 Power:             12kW Chip conveyor:     Yes Length:            4000mm Width:             2250mm Height:            3270mm Weight:            4400kg