used Grinding Machines for sale

This DANOBAT grinding machine was built in 1986 and completely overhauled (retrofit) in the year 2000, including a CNC control upgrade to SIEMENS 840D., It is in good condition (serviced by Danobat) and can be inspected under power upon appointment., Availability: June 2025 (to be confirmed), TANGENTIAL WHEELHEAD, Wheel dimensions: Ø750X150 mm, Cutting speed:

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Grinding wheel width: 125 mm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, No. of regulating wheel speeds: infinite, Regulating wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, Tall: 1260 mm, Weight: 1600 Kg

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Hydraulic motor power: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, Tall: 1.900 mm, Weight: 6.420 kg

General: Control Fagor Grinding area 400 x 200 mm Longitudinal travel 420 mm Transverse travel 192 mm Magnetic clamping plate 400 x 200 mm Table load max. 150 kg Grinding wheel dimensions 225 x 25 x 51 mm

Manufacturer GER Model CM 2500 CNC Year 2000 CNC FAGOR 8055 Characteristics Distance between centre 2.500 mm. Centre height 300 mm Max grinding diameter 595 mm. Max weight between centers 2.000 kg. Max weight grinding on air 350 kg. Longitudinal movement Max programable speed 6.000 mm/min. Min programable increase 0.001 mm Cross movement Max.programable speed 6.000 mm/min Min programable increase 0.001 mm. Various Max. grinding wheel size Ø 500/80 mm. Grinding wheel Cutting Speed 45 m/s Parts Holder Centre Cone C.M.6 Centre Cone Tailstock C.M.6 2 Steady Rests INCLUDED Machine weight 12.000 kg.

Gühring TBM 116 Grinding Device for Gun Drills The TBM 116 is a manual universal grinder.  It is particularly compact and forms a perfect unit together with the TBV 116 Gun Drill Grinding Device and the DSS 125 Double Grinding Wheel. It is particularly suitable for regrinding small and medium quantities of different diameters and lengths.  It also makes it possible, among other things, to easily attach a cross-chip breaker to gunhole drills. With two high-quality machine lights and two 220 V add-on sockets Machine data: Manufacturer: Gühring  Model: TBM 116 Universal Grinding Machine Operating voltage 400 V/50 Hz Grinding wheel speed 2850 rpm, max. Grinding wheel diameter 150 mm  Surface-mounted sockets 220 V DSS 125 Double Grinding Wheel Positioning table XY axis  TBV 116 The device is designed for regrinding gunholes in the diameter range of 3 mm to 30 m ...

Surface Grinding Machine JONES and SHIPMAN type 540 P Travel X: 483 mm Travel Y: 168 mm Maxi grinding height (Z): 280 mm Grinding wheel rotation: 3200 RPM Year of construction: 1996 Auto stepover X - Y Automatic Z-axis rise Equipped with: 1 Manual Magnetic Chuck BRAILLON 450 x 150 mm Voltage: 380 V Dimensions (L x W x H): 1500 x 1100 x 1800 mm Weight: approx 1 T

Control Heidenhain 1830 M - KELCO 110/120 Grinding length [mm] 1000 Tip width [mm] 1000 Workpiece headstock: Swivel range -10°/+100° Speed 800 rpm Tip height 175 mm Mounting cone inside MK5 Short cone holder outside DIN 55026 Workpiece weight max. 150 kg Grinding headstock: Tandem grinding headstock version B-axis -210°/+30° Internal grinding spindle 42,000 rpm Grinding table (X-axis): X-axis 320 mm Speed max. 7.5 m/min Resolution 0.1 μm Undertable (Z-axis): Center width 1,000 mm Z-axis 1,150 mm Speed max. 15 m/min Resolution 0.1 μm Equipment / Accessories: Coolant supply for coolant coolant system with filter Emulsion Mist Separator Mechanical Tailstock MK4, stroke 50 mm Balancing device ELASO eb 500 Gap Control Movomatic EG 102 Setup operation Electronic handwheel Accessories Various flanges, tips and linings.

Article number: 14-10-059 Manufacturer: Kugel Müller Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1968 L x W x H: approx. 1000x1000x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 310mm Grinding width: approx. 175mm Grinding height: approx. 200mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Grinding wheel dimension: approx. Ø175x100x76mm Grinding spindle speed: approx. 2850rpm Drive power: approx. 2.2kW Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Hydraulic up and down movement of the grinding spindle via pump lever  Documentation  Grinding wheels – protection  Splash guard – enclosure Other accessories on request Price and other technical data on request

Article number: 14-10-053 Manufacturer: Kugel Müller Very good general condition Machine in need of repair Shipping time: All rights reserved. Year of construction: ca.1988 L x W x H: approx. 1000x1000x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 310mm Grinding width: approx. 175mm Grinding height: approx. 200mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Grinding wheel dimension: approx. Ø175x100x76mm Grinding spindle speed: approx. 2850rpm Drive power: approx. 2.2kW Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Hydraulic up and down movement of the grinding spindle via pump lever  Documentation  Grinding wheels – protection  Splash guard – enclosure  Interior coolant device  Head cover New Other accessories on requ ...

Article code: 14-10-061 Manufacturer: Kugel Müller Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1000x1000x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 310mm Grinding width: approx. 175mm Grinding height: approx. 200mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Grinding wheel dimension: approx. Ø175x100x76mm Grinding spindle speed: approx. 2850rpm Drive power: approx. 2.2kW Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Hydraulic up and down movement of the grinding spindle via pump lever  Grinding wheels – protection  Documentation  Pull-off device Other accessories on request Price and other technical data on request

MADORA SB 1300X2500 aluminium grinding machine was built in 2018 in Poland. A highly reliable machine designed for a wide range of finishing operations i.e. deburring and edge rounding, achieves excellent machining results on the entire surface of the ground workpiece. For surface finishing of workpieces with a maximum thickness of 50 mm, the machine uses a 1300 mm wide technical fleece cylindrical grinding wheel with adjustable oscillation. The SB 1300X2500 aluminium sheet grinding machine is operated via a TFT control panel, which allows, among others, to adjust the machining thickness and change the feed speed of the gantry. The total weight of the machine is 2870 kg. Technical data of the MADORA SB 1300X2500 deburring machine - work table surface (L x W): 2500 x 1300 mm - maximum workpiece thickness: 50 mm - minimum workpiece thickness: 0.5 mm - feed rate: 0,5-2 m/min - numbe ...

Machine length 6.6 m Beam 2.8 m Height 2.5 m Weight 14,000 kg Drives Siemens

Machine length 6.6 m Beam 2.8 m Height 2.5 m Weight 14,000 kg Drives Siemens

Surface Grinding Machine MONOPRECIS 1DR Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1983 Manuel Magnetic chuck dimensions: 2500 x 130 mm Max Grinding wheel dimensions: Ø 170 mm Diamond system Manual movement Voltage: 380 V Dimensions (L x W x H): 1300 x 1200 x 1800 mm Weight: approx 800 kg

Double Bench Grinder REMA DS 04/150 Rotation: 2900 RPM Grinding wheel: Ø 150 x 25 mm Motor power: 0,3 kW Voltage: 380 V Width: 450 mm Depth: 300 mm Total height: 1100 mm Weight: env. 50 KG

Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Width: 600 mm Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Processed bore diameter, mm -100-400 Work piece diameter, mm - 800 Work piece length, mm - 320 P motor ,kW - 7,5 Machine dimensions , mm - 4165x1780x2000 Machine weight, kg - 8600 Price 9500 EUR

Article code: 14-10-066 Manufacturer: Cup Grinding Machine Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1975 L x W x H: approx. 600x600x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 300mm Grinding width: approx. 300mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Grinding wheels – protection Other accessories on request Price and other technical data on request

For sale model 3K544 specialized single-column slitting grinding machine for guide beds Designed for flat grinding of guide rails of basic parts of machines and machines with both flat and prismatic guides located at various angles. Maximum dimensions of processed products, mm 4000 x 1250 x 1250 Maximum table movement on the cylinder, mm 4600 Vertical movement of the crosshead, mm (not less) 450 Table movement speed (stepless regulation), m/min 2.5...18 Grinding wheels GOST 2424-83 CHK150x50x32 CHK175x63x32 PP300x40x127 Drive power of each grinding headstock, kW 5.5 Total power of electric motors installed on the machine, kW 32, 42 Overall dimensions of the machine (together with separately located units and electrical equipment), mm: Length 11020 Width 4025 Height 2950 Weight of the machine (together with separately located units and electrical equipment), kg 27850 ...

Voumard, 20448 - C28-9D, Fortuna Internal grinding spindle, up to 28000rpm, outer diameter 90mm, length approx. 350mm Picture below left ! Other spindles on request !

Control Other WEISS CNC Grinding length [mm] 1000 Tip width [mm] 1000 General: Control WEISS CNC Center width 1,000 mm Center height 200 mm Grinding wheel diameter 400 mm + 500 mm Workpiece headstock Speed 10 -450 rpm Workpiece weight max. 250 (100) kg Grinding diameter max. 350 mm Recording MK4 C-axis 0.00.1° Cylinder Correction Yes Grinding headstock Circumferential speed 20 - 50 m/s Grinding wheel diameter right 500 mm Grinding wheel diameter left 400 mm X-axis 380 mm Z-axis 1,050 mm B-axis infinitely variable swivel Internal grinding spindle: Type: Adjustable internal grinding spindle Dimensions D 80 x350 mm Dressing Device: Yes Tailstock: Quill diameter 50 mm Pionol stroke 45 mm Recording MK 4 Cylinder Correction Yes Equipment 7 accessories: Grinding spindles 2x grinding spindles (left/right) Internal grinding device speed-controlled GA ...

turning tool grinding machine Make: WMW Heckert Type: SFSRV 1000/2 Bn0kpb9hccg Power: 45kW Height: 600 mm Rotational magnet: 1.000 mm ø Magnet plate diameter: 1.000 mm