used Other Wire Working Machines for sale

Make - ABB Type - Advant Controller 31 - Analog I/O Unit Model - 07AC 91 Condition - Used, tested and in good working condition

Make: ABB Item: Touch Screen Display Model: CP650 P/N: 1SAP550100R0001 Condition: Used unit recovered from working unit, good to reuse

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

Make: ABB Item: ABB Master / PLC Controller Model: DSAI 110 Condition: Used unit in good working condition, good to reuse.

Make: ABB Item: DSCA 130 Model: ABB Master DSCA 130 57510001-AT Condition: The used unit was recovered from the working unit and is good to reuse.

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

IRB6600 Serie's upper arm extenders and different wrist modules will allow customization to each process. As the robot can bend fully backwards, the working range is greatly extended and the robot fits well into dense production lines. The IRB 6600 is ideal for process applications, regardless of industry. Typical areas can be Spot Welding, Material Handling and machine tending. Year: 2008 Reach in mm-2550 mm Payload-225 kg Cabinet: NOT Included (Works with IRC5 - we can try to find one for you) Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: Included Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Make: ABB Item: ABB Master Memory Module Model: DSMB 112 Condition: Used unit recovered from working unit, good to reuse.

Dehairer Abele Total power: 12 kW Engine: 2.2 kW Two-shaft with ejection arm External dimensions: 2200 x 900 x 1300 mm Working dimension: 1700 mm Condition: Used, very good

ABG OMEGA 510 Converter  Manufacturer: ABG  Machine type: Omega 510 Converter  Type: Blanco labelling machine  Year of construction: 2010  Working width: 520 mm  Number of punching stations: 2  Equipment:  Unwinding - 76 mm  Splicing table  Side edge control  Grid take-off and matrix rewinder/grid rewinder  Label converter/label shifter for 110x75 mm format (not ABG)  Slitting station with 4 shear blades  2 separate rewinding axes  Tools: o Magnetic cylinder 134 Z or 16.75 o Magnetic cylinder 161 Z or 20.125

ABG Omega Digicon Series I from 2006 in mint condition Manufacturer: AB Graphics Year: 2006 Working width: 330 mm Unwinding unit (1000mm) Webguide Flexo unit/ varnishing unit Lamination unit GEW uv dryer Kocher & Beck intermittent Die Cutting (full rotary and semi rotary) Label Waste rewind Side trim unit Slitting unit with rotary cutting knives Rewinding unit Machine is available immediately – contact us for more information or inspection

ABG DIGICON II - CONVERTING Year of Manufacture: 2009 ________________________________________ Product Description: Year of Manufacture: 2009 Location: Labelpresshop/Germany Availability: Immediately available Condition: Very good working condition, regularly maintained ________________________________________ Machine Specifications and Equipment: • Web width: 330 mm • Control panel: Movable central control panel • Unwinder: With web edge guide system • Corona Treatment System for surface preparation • Round-to-round Heat Sealing Unit • Flexo Printing Unit: Full / semi-rotary • Cold Foil & Lamination Unit • Drying System: UV and hot air drying • Central Dancer Roller for web tension control • Die-Cutting Unit: Full / semi-rotary with heating oven and Beck Gapmaster • Waste Removal System: De-weeding with rewinder • Slitting Knives: 2 bottom  ...

Brand: Abus Kran Systeme Type: GM1 250.6-111 Model: S13371 Serial Number: D780103/0009 Construction year: 1997 Weight: 40 kg Power: 50Hz Lifting capacity 250 kg Length mm: min 400mm - 5000 Width mm: 400 Height mm: 400 Working height: variable Maximum speed: 1.5/6.0 m/min Condition machine : Used Electric. Connection: 16A

Technical data: Pan working capacity: 150 Kg. Pan speed: 5 - 15 RPM Pan outside diameter: 48 (1219.2 mm) Pan mouth diameter: 19 (482.6 mm) Base construction: Stainless steel Drive motor: 2 hp 1440 RPM Height: 75 (1917.2 mm) Floor space: 61 x 50 (1548.9 x 1270 mm) Weight: 1550 lb (700 Kg) Advanced Specifications flow tab system: A key feature of the Flowtab system is the unique spraygun, designed by BWI Manesty to improve coating efficiency, reduce operational downtime; and simplify cleaning. The automatic clean-out facility prevents fluid blockages within the nozzle, even during extended production cycles; Even at low atomising pressures, the spray rate and pump speed of the Flowtab can be controlled manually via the portable console or, automatically, from the ACS control console, without adjusting the sprayguns. Noted for their ability to deliver fast, flexible and co ...

ACCUTEX GA 43AL wire EDM machine was built in 2018 in Taiwan. This highly efficient and reliable machine can achieve complex and difficult shapes, making it ideal for the production of precision tools, dies and punches. The traditional drive has been replaced by a direct, closed-loop linear drive system to eliminate backlash and increase cutting capacity by up to 10%, with much lower energy consumption and constant operating temperature. The GA 43AL EDM machine features a state-of-the-art AccuteX CNC control based on a Windows system with touchscreen and compatibility with CAD/CAM software. The controller optimises the machining parameters according to different wire diameters, corner angles, arc radius and workpiece thickness for the best cutting efficiency and accuracy. The wire EDM machine weighs 2800 kg. Technical data of the ACCUTEX GA 43AL wire EDM machine - CNC control: Acc ...

Stock # U2436 Used stainless steel lab size double cone powder mixer by ACH-MECH (PL). Total volume of mixing chamber 25 l. Working volume about 12-15 l, with maximal weight of batch up to 16 kg. Contact parts designed in stainless steel AISI 316L. Feeding inlet has diameter 200 mm and is closed with stainless steel lid. Discharge outlet has diameter 80 mm and has manually operated buttlerfly valve. Distance from discharge outlet to bottom support plate 730 mm. Mixer has also manually rised, plexiglass cover, equipped with safety switch. Machine is driven by el motor 1.1 kW, 1415 rpm, 230 /400 V , 50 hz. Working rotation adjustable in range from 4-18 rpm. Machine has local control panel, and is mounted on mobile pedestal, designed in stainless steel AISI 304. Includes technical documentation and CE certificate.

Wire stitcher Acme Champion Model A Year 1960 Capacity 6 mm Details for blocks & pamphlets Available direct

LASER BLM ADIGE COMBO Year 2007, 3500 Watt Rofin DC035 Working area 3000x1500 Automatic loding/unloading . Workable tube dimension : min. 16 mm. max 220. Max tube dimension at loading is 6000 mm. This Combo at the moment is unlicensed for the tube license. The tube software Adige BLM license can be purchased easly. The price of this Combo without tube license is Euro 27.000 The price of this Combo whit the tube software Adige BLM license is Euro 52.000 The laser is visible during daily production in the factory. It is in the North of Italy

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A.. The machine, designed for machining workpieces with a maximum length of 1500 mm, is distinguished by the use of many state-of-the-art technical solutions. It thus meets all, even the most intensive challenges of modern business. The ADIRA BB3515 CNC press brake is equipped with a powerful electric drive , developed in Bluedrive technology. Compared to a standard hydraulic system, this drive is free of filters, seals and hydraulic oil. As a result, the machine is much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. Furthermore, ADIRA’s patented HEXA-C design concept minimis ...

Serial Number: 20916 Weight: 0,35 tons Power: 3.7 kW Air pressure: 6- 10 Bar Length mm: 3900 Width mm: 1300 Height mm: 1800 Working height: 1030mm Transport size L x W x H: 3,9 x 1,3 x 1,8 mtr. Min.-max glass size: 100x 100 -800x3400 in mm Condition machine : As good as new Control type: Automatic Electric. Connection: 230 Volt Missing parts: Hotmeld Documentation: Yes Instructions: Yes Electric diagram: Yes Photos/film available: Photos and video available

Line for madeleines, minicakes, and also for cookies and other Year 2014 Capacity 600 - 800 kg/h Including AERA oil sprayer AERA depositor for soft dought AERA depositor for hard dought with wire cut POLIN oven gas 20 metres long used for trays 600 × 400 mm Cooling conveyor AERA troubleshoot (vacuum) Packaging aera with linear weigher, Schib CO50 flowpack double jaws for individual sachets, counter with Vegatronic vertical bagger Line in very very good shape More photos and videos on demand

Cooling capacity: 969 kW (12/7 — 35°C) Heating capacity: 1002 kW (40°C/45°C - 7°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Number of fans: 18 pcs. Heat exchanger: Plate Options: Heat pump, High Efficiency, Hydraulic module Hydraulic module: 2 pcs. water pump, expansion vessel Type of refrigerant: R410A Compressors: 6 pcs. Copeland (scroll) Dimensions: 2.24 x 2.20 x 10.71 m. Weight: 8 120 kg. Working hours: 256/256/1006/10046/10049/10055 Condition: Exsellent, Outlet

Cooling capacity: 195 kW(12/7 — 35°C) Year of manufacture: 2012 Number of fans: 6 pcs. Refrigerant circuit: 2 pcs. Type of refrigerant: R410A Heat exchanger: Plate Options: Freecooling Compressors: 4 pcs. Danfoss (scroll) Dimensions: 1.97 х 1.50 х 4.35 m. Weight: 1700 kg. Working hours: 127/1444/1455/240 h. Condition: Excellent

High speed mixer granulator Aeromatic PMA 1800 Gross volume 1800 Lt. Normal working volume 1500 Lt. Average granulated batch weight 825 Kg Impeller speeds 59/118 rpm Impeller motor capacities 60/75 kW Granulator speeds 1500/3000 rpm Granulator motor capacity 7.5/11 kW

High speed mixer granulator Aeromatic PMA 800 Gross volume 800 Lt. Normal working volume 640 Lt. Average granulated batch weight 350 Kg Impeller speeds 78/156 rpm Impeller motor capacities 30/36 kW Granulator speeds 1500/3000 rpm Granulator motor capacity 7.5/11 kW

Machining center in continuous flow Usable width 1300 mm Working Dimensions X:4200 mm / Y: 1300mm / Z: 60 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1Saw Blade) Working Speeds X: 100m/min / Y: 100m/min - Z: 20m/min 5.5 Kw I 7.50 HP ISO 30 HSD Spindle Motor Panel Handling with Double Clamping System (Independent Servo Control) Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 3.500 kg

Machining center with drilling group without milling unit Working Dimensions X:Unlimited / Y: 950mm / Z: 70 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1 Saw Blade) Working Speeds X: 70m/min / Y: 70m/min - Z: 20m/min Panel Handling with Single Clamping System Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 1.450 kg

Continuous cnc with drilling unit and also electrospindle for milling work Working Dimensions X:Unlimited / Y: 950mm / Z: 70 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1 Saw Blade) Working Speeds X: 70m/min / Y: 70m/min - Z: 20m/min 5,5 Kw I 7.50 HP ER32 Manual HSD Spindle Motor Double Sided Air Flotation Working Table Piece Verification System with Laser Weight (Approx.) 1.500 kg

Working Dimensions 4200 x 4200 mm Cuttin Depth 75mm - Projection 90mm (18mm4PCS) 11kW I 14.75 HP Main Saw Motor 1.5kW I 2 HP Scoring Saw Motor Pneumatic Controlled Saw Carriage Up/Down Movement 80m/min Saw Carriage Cutting Speed Max. Cutting Blade Diameter 380mm Max. Scoring Blade Diameter 200mm 8 Pcs Holder Quantity Air Floating Table (4 Pcs) - 1 Fixed, 3 Movable

AFM TAE 25N CNC turning center was built in 1997 by the Polish company AFM ANDRYCHÓW. The highly efficient machine, which is used for unit or series production, is ideal for any industrial plant with an emphasis on quality and precision. The turning process of workpieces with a maximum diameter of 300 mm is performed automatically in a large work area equipped with a 12-position SAUTER tool head and a reliable spindle. All parameters are porgrammed in the intuitive SIEMENS SINUMERIK 840D CNC controller, which reduces the operator’s need to operate the machine to a minimum. The AFM TAE-25N CNC lathe weighs 4200 kg. Technical specifications of the AFM TAE 25N turning center - working feed of longitudinal slide (X axis): 385 mm - working feed of transverse slide (Z axis): 150 mm - working feed rate range in the X,Z axis: 0-15000 mm/min - rapid traverse in the X,Z axis: 15 m/min - ...

Agfa Azura C 95 washout; cleaned and tested; Working width 200-950mm; Printing plate length 310-1100mm; Printing plate thickness 0.15-0.30mm; Double brush; suitable for chemical-free printing plates. Clean out unit Agfa Azura C 95; cleaned and checked; working width 200-950mm; plate lenght 310-1100mm; plate thikness 0.15-0.30mm; double brush; used for chemistry free plates.

Capstan-Motor for AccuSet - see all details in the picture. The Motor is tested and is out of a well working AccuSet.Available: on stock

Capstan-Sensors for AccuSet, it is the complete unit with both sensors - see all details in the picture. The Sensors are tested and are out of a well working AccuSet. Available: on stock

Complete Laser Modul for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Cutter for AccuSet - see all details in the picture. The Cutter is tested and is out of a well working AccuSet.Available: on stock

AGFA Laser for SelectSet 5000. The Laser is tested and working - see picture. We can send you the original picture in high resolution where you can see clearly the Laser running.Available: now

AGFA Laser for SelectSet 5000 including PowerSupply. The Laser is tested and working - see picture. We can send you the original picture in high resolution where you can see clearly the Laser running.Available: now

Laserset for ProSet9400 - see all details in the picture. The Lasers are out of a well working ProSet. Available: on stock

Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Transport Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25.Available: on stock

Panel for Avantra25 - see all details in the picture. The Panel is out of a well working Avantra25. Available: on stock

Powersupply for AccuSet - see all details in the picture. The Powersupply is tested and is out of a well working AccuSet. Available: on stock

Supply-Cassette for all AccuSets - see all details in the picture. The Cassette is tested and is out of a well working AccuSet. Available: on stock

Supply-Cassette for Avantra25 - see all details in the picture. The Cassette is out of a well working Avantra25. Available: on stock

Supply-Motor for AccuSet, it is the complete unit for an easy change - see all details in the picture. The Motor is tested and is out of a well working AccuSet. Available: on stock

Takeup-Cassette for all AccuSets - see all details in the picture. The Cassette is tested and is out of a well working AccuSet. Available: on stock

Takeup-Cassette for Avantra25 - see all details in the picture. The Cassette is out of a well working Avantra25. Available: on stock

Output-Motor for AccuSet, the Motor is located before the TakeupCassette - see all details in the picture. The Motor is tested and is out of a well working AccuSet. Available: on stock