used Paper baling press for sale

For sale is a bread press with a weight range of 30-100g. Partial and circular moulding agents Electronic control with memory for 10 products Incl. 3 knitting plates

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

Abac used machine volume flow: 21 m3/min pressure: 13 bar

We sell our air compressor because we need a bigger one. 3027 hours total run and service was always maintained. The compressor was built in 2014. Can be viewed at any time and can also be picked up directly

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Zeiss Model UMM850 Zeiss Model: UMM850 850mm X, 1200mm Y, 600mm Z, 7’ X 4’ X 12” table, Zeiss probe, 5 station probe changing station, joystick controls, Wilkerson compressed air dryer

ABG DIGICON II - CONVERTING Year of Manufacture: 2009 ________________________________________ Product Description: Year of Manufacture: 2009 Location: Labelpresshop/Germany Availability: Immediately available Condition: Very good working condition, regularly maintained ________________________________________ Machine Specifications and Equipment: • Web width: 330 mm • Control panel: Movable central control panel • Unwinder: With web edge guide system • Corona Treatment System for surface preparation • Round-to-round Heat Sealing Unit • Flexo Printing Unit: Full / semi-rotary • Cold Foil & Lamination Unit • Drying System: UV and hot air drying • Central Dancer Roller for web tension control • Die-Cutting Unit: Full / semi-rotary with heating oven and Beck Gapmaster • Waste Removal System: De-weeding with rewinder • Slitting Knives: 2 bottom  ...

Several AbL peeling machines for sale. Different years of construction. Complete with water supply, of course. In addition, dip tank, various conveyor belts, large box tippers, etc. Compressors, water cooling ... for more information please enquiries.

Technical data: Pan working capacity: 150 Kg. Pan speed: 5 - 15 RPM Pan outside diameter: 48 (1219.2 mm) Pan mouth diameter: 19 (482.6 mm) Base construction: Stainless steel Drive motor: 2 hp 1440 RPM Height: 75 (1917.2 mm) Floor space: 61 x 50 (1548.9 x 1270 mm) Weight: 1550 lb (700 Kg) Advanced Specifications flow tab system: A key feature of the Flowtab system is the unique spraygun, designed by BWI Manesty to improve coating efficiency, reduce operational downtime; and simplify cleaning. The automatic clean-out facility prevents fluid blockages within the nozzle, even during extended production cycles; Even at low atomising pressures, the spray rate and pump speed of the Flowtab can be controlled manually via the portable console or, automatically, from the ACS control console, without adjusting the sprayguns. Noted for their ability to deliver fast, flexible and co ...

ACMA rotary frame press line 4-tray carousel Manufacture of plywood beams, solid wood panels Ideal joinery, finger jointing, worktop, etc... Press n°1: Useful length: 4500 mm Usable height: 1300 mm Useful thickness: 100 mm 5 hydraulic front balers 10 double-acting hydraulic cylinders Press n°2: Usable length: 7500 mm (3 zones of 2500 mm) Usable height: 1300 mm Useful thickness: 100 mm 9 hydraulic front pressers 18 double-acting hydraulic cylinders Wood feeding table, gluing width 200 mm Vertical roller discharge table Traffic congestion: Length: 9000 mm Width: 2900 mm Height: 3200 mm Weight: 13000 Kg

Order No. 6761 TECHNICAL DATA 6 hydraulic cylinders: - 4 upper - 2 side - max. length of glued elements 3100mm - max height of glued elements 1600mm - pump motor power 1.5kW - dimensions length / width / height 4320x1500x1120mm - weight kg ADVANTAGES - unpainted - possibility of gluing in vertical and horizontal position - used press - very good condition PRODUCT FEATURES The press is designed for assembly of all rectangular frame structures, e.g. doors, windows of various dimensions. An additional hydraulic cylinder is responsible for the possibility of gluing in the vertical and horizontal position. Net price: PLN 18 900 Net price: EUR 4021 Net price, calculated at the rate of 4.70 PLN / EUR (with greater fluctuations in the rate, the price may change)

Gluing Press / Press Rotor / Gluing Stars For the production of solid wood panels or similar Manufacturer: ACMA Levels: 4 Hydraulic Cylinders: 6 per level Hold-down: 2 frames per level Working area per level approx. 2900 x 1150 mm

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

Printingmachine - Four Colour Offset press Make Adast Model Dominant 547P Year 1996 Maximum sheet size 381 x 520 mm (in perfecting mode a little less) Dampening Varn Kompac III Feeder stream feeder - up to 12.000 sheets per hour Perfecting 4-0 / 2-2 Delivery low pile delivery Ink bins INKLFOW remote controlled sliced ink ducts Plate change semi automatic Available Direct

ADAST DOMINANT 846 P -Year 2001 -Impressions: 42 mil. ( battery changed and started now from zero ) -Perfecting 2+2 or straight 4+0 -Size max: 520x740 mms. -Max speed 12.000 sh/hour -Max paper thickness 0,5 mms. -Alcohol dampening with Technotrans refrigeration -High pile delivery -Table control for all registers -Easy plate change system -Powder sprayer, in production

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A.. The machine, designed for machining workpieces with a maximum length of 1500 mm, is distinguished by the use of many state-of-the-art technical solutions. It thus meets all, even the most intensive challenges of modern business. The ADIRA BB3515 CNC press brake is equipped with a powerful electric drive , developed in Bluedrive technology. Compared to a standard hydraulic system, this drive is free of filters, seals and hydraulic oil. As a result, the machine is much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. Furthermore, ADIRA’s patented HEXA-C design concept minimis ...

with crowning device make WILA with the following scope of delivery: Standard tool set with dies 835 mm and 795 mm Oil filling Foot pedal LazerSafe Security System/CE Two front support arms 500 mm movable Special features: patented HEXA-C frame, low-torsional and therefore very accurate, hydraulics in semi-hybrid equipment, very energy-saving, as the engine only runs at 5Hz at idle The bounce during start-up and downhill is controlled by two high-precision servo valves Two linear encoders ensure accurate positioning of the press beam Adjustable guide of the press beam made of self-lubricating material Electrics and hydraulics with surge protection X&R axis run on backlash-free ball screws driven by servo motors Rear of the machine with light barrier secured Total power requirement: 15 kW Projection: 400 mm Stand width: 2550 mm Back gauge: 625 mm T ...

Offer 23339 Specifications: -.max. Working length 2550 mm - Column passage 2050 mm -.max. Press force 63 t - Table width 125 mm - Projection 450 mm - Max. stroke 100 mm -.max. Installation height 310 mm - Table height 900 mm - Drive power approx. 5.5 kW - Space requirement approx. W 3300 x H 2100 x D 1400 mm - Weight approx. 4.9 t - with: - man. Back gauge - Separate control panel with foot switch - split sharpening tool + universal die

Serial Number: 20916 Weight: 0,35 tons Power: 3.7 kW Air pressure: 6- 10 Bar Length mm: 3900 Width mm: 1300 Height mm: 1800 Working height: 1030mm Transport size L x W x H: 3,9 x 1,3 x 1,8 mtr. Min.-max glass size: 100x 100 -800x3400 in mm Condition machine : As good as new Control type: Automatic Electric. Connection: 230 Volt Missing parts: Hotmeld Documentation: Yes Instructions: Yes Electric diagram: Yes Photos/film available: Photos and video available

Hot press Adkins OM 1000 Government machine Baujar 2015

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally ...

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally ...

Engine + compressor AEG 60Hz / 440V / 222KW / 37,5A

10 MW, back pressure 38 bar inlet pressure

One used AEG Kanis G 20 back pressure steam turbine from 1985 in good running condition.  The steam inlet pressure of 14 bar can be increased up to 20 bar. Alternators with other voltages are also available on request. For Sale type: AEG-Kanis G20 el. power: 2046 KW generator end: AEG 2650 KVA, 5250 Volts, 50 Hz, cos phi 0,8 steam consumption: 40 to/h at full load steam inlet pressure: 14 bar (up to 20 bar possible) back pressure: 4,5 bar inlet steam temperature: 320 °C gear ratio: 8,04 manufactured: 1985 mesurements: 8,30 L 3,00 H 4,2 W price on request: Here you can download all the turbine pictures (30 MB):  abc.stromerzeuger-discount.de/AEG-Kanis_G20_back_pressure_2046_kw_steam_turbine_14_bar/all_pictures.zip Here you can download the scope of ...

Power:107 kW Year of manufacture: 2008 Type of refrigerant: R407C Refrigerant circuit: 2 pcs. Compressors: 3 pcs. Danfoss (scroll) Hydraulic module: 1 pc. water pump, buffer tank, expansion vessel Number of fans: 2 pcs. Dimensions: 3.00+0.26x 1.12x1.90 m Weight: 1140 kg Condition: excellent

KW Set Lufcooled AERMEC Techn. data Aermec: • Type NRA 1500 • Cooling capacity: 390 kW • Y.O.M.: 2004; • 6 x fans; 6 x Danfoss Scroll Compressor • R 407 c; 2 circles a 44 kg; • Dimensions: B 2.2 x L 4.3 x H 2.6 m plant ran until the last, was serviced until 2019; was used for indoor air conditioning.

Cooling capacity: 969 kW (12/7 — 35°C) Heating capacity: 1002 kW (40°C/45°C - 7°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Number of fans: 18 pcs. Heat exchanger: Plate Options: Heat pump, High Efficiency, Hydraulic module Hydraulic module: 2 pcs. water pump, expansion vessel Type of refrigerant: R410A Compressors: 6 pcs. Copeland (scroll) Dimensions: 2.24 x 2.20 x 10.71 m. Weight: 8 120 kg. Working hours: 256/256/1006/10046/10049/10055 Condition: Exsellent, Outlet

Cooling capacity: 195 kW(12/7 — 35°C) Year of manufacture: 2012 Number of fans: 6 pcs. Refrigerant circuit: 2 pcs. Type of refrigerant: R410A Heat exchanger: Plate Options: Freecooling Compressors: 4 pcs. Danfoss (scroll) Dimensions: 1.97 х 1.50 х 4.35 m. Weight: 1700 kg. Working hours: 127/1444/1455/240 h. Condition: Excellent

PROD. Aerzen TYPE GM50L YEAR 2015 POWER (kW) 89.90 CAPACITY (m3/min) 55.16 PRESSURE (bar) 1

PROD. Aerzen TYPE GM90 S YEAR 2008 POWER (kW) 93.80 CAPACITY (m3/min) 59.80 PRESSURE (bar) 1

Low-pressure blower GMB 14.8, built 1994, with 11,8 m³/min. volume stream at delta-P = 360 mbar, P1 = 0,64 bar. 44 kW / 1.485 RPM drive, with flow check valve, pressure-limiting valve, tank, air filter, base frame and sound insulation hood.

The Aerzen blower unit, which was manufactured in 1986, is a reliable and powerful solution for various applications. With an operating pressure of 1.05 bar, it provides the necessary compressed air for industrial processes, ventilation systems or other applications. The blower unit has been carefully manufactured and is characterized by its durable construction and efficient performance. It is designed to generate high airflows while maintaining stable operating pressure. We would like to assure you that we can offer you the best possible price for this blower unit. The price is negotiable, so we can respond flexibly to your requirements. If you would like more details about the blower unit or have any questions, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries promptly. Contact us today to learn more about this Aerzen blower  ...

Air dryer suitable for 7,5kW compressors. Designed for use with Aflatek Screw10A and Screw10A-200 compressors. Technical data: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Air dryer suitable for 15kW compressor. Designed for use with Aflatek Screw20A compressor. Technical specifications: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Air10: -Very compact, easy to transport. -Easy to use. -Requires little maintenance. Technical data: Power supply , V: 230 Motor power, W: 750 Motor power, HP: 1 Air delivery, L/min: 126 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 10 Dimensions, (length x width x height), mm: 470x200x530 Weight, kg: 17 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 500x240x540 Weight, kg: 18 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Air100L: -100l air tank, longer operation. -Multistage air compression. -Powerful 2.2kW belt-driven motor. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 3PH 400V 50Hz Motor Speed, rpm: 2850 Motor power, kW: 2.2 Motor power, HP: 3 Air delivery, L/min: 330 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 100 Dimensions, (length x width x height), mm: 1180x400x770 Weight, kg: 70 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1200x435x800 Weight, kg: 85 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Air100V: -100l air tank, longer operation. -Multistage air compression. -Powerful 2.2kW belt-driven motor. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 230 Motor Speed, rpm: 2850 Motor power, kW: 2.2 Motor power, HP: 3 Air supply, L/min: 350 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank , L: 100 Dimensions(length x width x height), mm: 1180x400x770 Weight, kg: 74 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1200x435x800 Weight, kg: 89 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Air15: -Very compact, easy to transport. -Vertical design, comfortable to carry. -Easy to use. -Requires little maintenance. Technical data: Power supply , V: 230 Motor power, W: 1.8 Motor power, HP: 2.5 Air delivery, L/min: 206 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 15 Dimensions, (length x width x height), mm: 350x350x770 Weight, kg: 21 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 360x360x780 Weight, kg: 22 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Air200W 5.5kW: -Multistage, 3 cylinder air compression. -Easy to use. -Air filter on each pump. -Large air tank, longer operation time. -Mounted on 4 wheels. Technical data: Descriptions Air200W 5.5kW Power supply , V: 3Ph 400V 50Hz Motor power, kW: 5.5 Motor power, HP: 7.5 Air supply, L/min: 670 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank, L: 200 Dimensions(length x width x height), mm: 1350x500x1020 Weight, kg: 135 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1525x525x1115 Weight, kg: 165 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Air300W is multistage reciprocating compressor with up to 8 bar maximum pressure. It has three separate cylinders and powerful 7.5 kW belt drive motor. Excellent for construction sites, service stations and industrial manufacturing plants. Advantages of Aflatek Air300W: -Multistage, 3 cylinder air compression. -Easy to use. -Air filter on each pump. -Large air tank, longer operation time. -Mounted on 4 wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 1070 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank, L: 300 Dimensions(length x width x height), mm: 1410x500x1110 Weight, kg: 183 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1450x630x1200 Weight, kg: 200 Tracking: Available -Price is with VAT 21% included. Contact us if  ...

Advantages of Aflatek Air50: -50l air tank, longer operation time. -Mounted on 2 rubber wheels, portable. -Easy to use. -Requires little maintenance. Technical data: Power supply , V: 230 Motor Speed, rpm: 2850 Motor power, kW: 1.8 Motor power, HP: 2.5 Air delivery, L/min: 206 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 50 Dimensions, (length x width x height), mm: 840x430x690 Weight, kg: 30 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 850x450x710 Weight, kg: 32 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Large 500l air tank and 7.5kW belt-driven motor provides long operation time and very high air delivery. Air500W is professional compressor designed for industrial use where high amounts of compressed air is required. Advantages of Aflatek Air500W: -Multistage, 3 cylinder air compression. -Easy to use. -Air filter on each pump. -500l air tank, longer operation time. -Mounted on 4 wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 1070 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank, L: 500 Dimensions(length x width x height), mm: 1750x800x1300 Weight, kg: 219 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 2000x850x1350 Weight, kg: 262 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free of ...

Advantages of Aflatek Air50V: -50l air tank, longer operation. -Powerful 2.2kW direct drive motor. -Mounted on 2 rubber wheels, portable. -Easy to use. -Requires little maintenance. Technical data: Power supply , V: 230 Motor Speed, rpm: 2850 Motor power, kW: 2.2 Motor power, HP: 3 Air delivery, L/min: 360 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 50 Dimensions, (length x width x height), mm: 860x450x710 Weight, kg: 40 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 880x460x730 Weight, kg: 42 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek AirPro200W: -Multistage, 3 cylinder air compression. -High pressure resistance. -Easy to use. -Air filter on each pump. -Large air tank, longer air tool operation time. -Mounted on 4 rubber wheels, easily portable. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 5.5 Motor power, HP: 7.5 Air supply, L/min: 800 Maximum pressure, Bar: 12.5 Maximum pressure, Psi: 181 Air tank, L: 200 Dimensions(length x width x height), mm: 1320x500x1000 Weight, kg: 142 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1525x525x1115 Weight, kg: 175 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek AirPro300W: -Large 300l air tank -12.5bar maximum pressure. -Powerful 7.5kW belt-driven motor. -3 cylinder multistage air compression. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 3Ph 400V 50Hz Motor Speed, rpm: 730 Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 1070 Maximum pressure. Bar: 12.5 Maximum pressure, Psi: 181 Air tank, L: 300 Dimensions(length x width x height), mm: 1330x570x1080 Weight, kg: 178 Shipping details: Packaging: Plywood box on a pallet Dimensions(length x width x height), mm: 1485x590x1125 Weight, kg: 213 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek AirPro500W: -Large 500l air tank -12.5bar maximum pressure. -Powerful 7.5kW belt-driven motor. -3 cylinder multistage air compression. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 3Ph 400V 50Hz Motor Speed, rpm: 730 Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 800 Maximum pressure. Bar: 12.5 Maximum pressure, Psi: 181 Air tank, L: 500 Dimensions(length x width x height), mm: 1840x600x1130 Weight, kg: 260 Shipping details: Packaging: Plywood box on a pallet Dimensions(length x width x height), mm: 1900x650x1200 Weight, kg: 280 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Screw10A: -Powerful 7.5kW electrical motor. -Air and oil filter already included. -Low noise and vibrations level. -Compact, vertical design. -Up to 10 bar pressure. Technical data: Power supply , V: 14,3A 400V 50Hz Motor power, kW: 7.5 Air supply at 10 bars, L/min: 800 Oil-Air Separator Volume 7L Noise Level, dB: 64 Dimensions, (length x width x height), mm: 900x890x860 Weight, kg: 200 -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Screw10A-200: -Powerful 7.5kW electrical motor. -Integrated 200l air tank. -Air and oil filter already included. -Low noise and vibrations level. -Compact, vertical design. -Up to 10 bar pressure. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 7.5 Air supply at 8 bars, L/min: 1100 Air supply at 10 bars, L/min: 910 Outlet diameter, inch: 3/4'' Noise Level, dB: 64 Air tank, L: 200 Dimensions, (length x width x height), mm: 1250x590x1600 Weight, kg: 330 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1400x700x1800 Weight, kg: 360 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.