used Paper sheet joggers for sale

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

Printingmachine - Four Colour Offset press Make Adast Model Dominant 547P Year 1996 Maximum sheet size 381 x 520 mm (in perfecting mode a little less) Dampening Varn Kompac III Feeder stream feeder - up to 12.000 sheets per hour Perfecting 4-0 / 2-2 Delivery low pile delivery Ink bins INKLFOW remote controlled sliced ink ducts Plate change semi automatic Available Direct

Inkdot, Standard Dampening, High Pile Delivery, Powder Sprayer, Speed: 10.000 Sheets/Hour

Used fiber laser cutting machine BLM LT 9 Combo Fiber An automated device capable of processing closed and open profiles: pipes, square profiles, rectangular profiles and sheets. Basic information Manufacturer: BLM Adgie Year of manufacture: 2011 Power: 3kW The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Additional information - table dimensions: 3000x1500 mm - scope of profile processing: round Ø16÷225 mm square 16x16÷160x160 mm rectangular 16x16÷200x100 mm - Maximum lenght: 6000 mm - maximum cutting thickness of materials: black steel: 20 mm stainless steel 8-10 mm aluminum: 8mm Brass: 5 mm Copper: 5 mm

3000 x 1500mm Sheet 6500mm Tube length 3000w IPG FIBER

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A.. The machine, designed for machining workpieces with a maximum length of 1500 mm, is distinguished by the use of many state-of-the-art technical solutions. It thus meets all, even the most intensive challenges of modern business. The ADIRA BB3515 CNC press brake is equipped with a powerful electric drive , developed in Bluedrive technology. Compared to a standard hydraulic system, this drive is free of filters, seals and hydraulic oil. As a result, the machine is much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. Furthermore, ADIRA’s patented HEXA-C design concept minimis ...

Agnelli Automatic sheeter Stainless, Automatic sheeter and kneader, Produces pasta sheets, Up to 250Kgs per hour, Stainless 200Kg agitated hopper, 250mm sheets, variable speed, with spare belt, 3Ph

lechrichter, used,       sheet leveller, used,   Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of     straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...

AJAN SHP 130 plasma cutting machine was built in 2015 in Turkey. This highly efficient and precise machine is used in the thermal cutting of stainless steel, structural steel and aluminium sheets. In the machining process, the AJAN SHP 130 1500 X 3000 plasma cutting machine uses a plasma torch, which is powered by a reliable 130 A plasma source. The lightweight design made of a stiffened profile additionally ensures that cutting is performed with the utmost stability, even during the most intensive machining. Any contamination generated during machining is eliminated on an ongoing basis by the extraction table, increasing operator comfort and safety. To this date, the machine has run for a small amount of time and is in perfect condition. The work table grate was replaced with a new one during a recent upgrade. The offer also includes optional equipment, which includes a torch holder  ...

Length: 2600 mmRoll diameter: 10 mmAxial travel: 0 mm Make Akyapak 10 mm Type AHS 2600 Year 2004 4 walzen rundbiegemaschine akyapak 2600 x 10 Sheet thickness (mm) Bend T = 10 mm Bending length (mm) Pre T = 8 mm Number of rolls 4 roller Diameter = 210 / 190 Power = 7.5 kW Speed = 4 M / Min

Length: 2600 mmRoll diameter: 10 mmAxial travel: 0 mm Make Akyapak 10 mm Type AHS 2600 Year 2004 4 walzen rundbiegemaschine akyapak 2600 x 10 Sheet thickness (mm) Bend T = 10 mm Bending length (mm) Pre T = 8 mm Number of rolls 4 roller Diameter = 210 / 190 Power = 7.5 kW Speed = 4 M / Min

Transversal Sheet metal Stiffening machine ALMORE type DS RT 1500 Year of construction:1988 Capacity: 1550 x 1,5 mm Thickness: from 0,4 to 1,5 mm Speed: from 7 to 15 m/min. Foot control Length: unlimited Useful machine for making ventilation ducts Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 1500 kg

<br>Collective chain &amp; investors 1 station hand feeding 6 Stehendbogenanleger Double and false sheet control Bulletin station 2 Heftk pfe Hohner Large of roller cleaning for 4 wire wheels 1 Three knife trimmer Media cutting device Band display<br><br>Still in operation: No.<br>Available: immediately

Capacity round maximum diameter: 0 mmAngle degrees maximum: 0Capacity square: 0 mmWorkpiece height: 0 mmWorkpiece width: 0 mmCapacity rectangle: 0 mm Technical dataCut range: round up to: 250 mmBand length: 3505 mmBand width: 25 mmSheet thickness: 0.95 mmVoltage 50 Hz 3x: 380 VoltPower: 2.2 kWMachine´s weight about: 800 kgOverall dimensions machine:Length: 2000 mmWidth: 1900 mmHeight: 1400 mm

AMADA EM2510NT punching machine was built in 2005 in France by AMADA EUROPE S.A.. The machine, designed for machining of thin metal sheets with a maximum thickness of 3.2 mm, is distinguished by its high reliability and precision. All machining processes are performed with a high press force of 20 tonnes, by means of tools located in a 45-station turret. A brush table with integrated balls prevents scratches and nicks on the surface of the sheet metal, as well as facilitating its positioning. The AMADA EM 2510 NT punching machine weighs 18000 kg. Technical specifications of the AMADA EM2510NT punching machine - maximum press force: 20 t (200 kN) - number of axes: 5 (X,Y,T,C,A) - feed in the X/Y axis: 2500/1270 mm - feed rate in the X/Y axis: 100/80 m/min - maximum workpiece thickness (plain steel): 3.2 mm - maximum workpiece dimensions (L x W): 5000 x 1270 mm - maximum workpiec ...

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

3000 x 1500mm / 4000w / Sheet Tower Automation

AMADA HFBO 125-40 CNC hydraulic press brake was built in 1998 in France by AMADA EUROPE S.A. The machine, distinguished by its high productivity and excellent precision, is used for machining sheet metal with a maximum length of 4200 mm. The rigid design combined with a press force of up to 125 tonnes ensures the achievement of the best bending results, regardless of the material type. Daily work, on the other hand, is facilitated by the simple operation of the machine in the form of a convenient foot switch and intelligent CNC control, in which advanced machining programmes are created in just a few steps. The HFB 125/4 CNC press brake weighs 10000 kg. Technical specifications of the AMADA HFBO 125-40 press brake - CNC controller: AMADA OPERATEUR - number of axes: 8 - maximum press force: 125 t (1250 kN) - maximum sheet metal width: 4200 mm - slider stroke: 180 mm - stopping ti ...

AMADA HFE 170-3 L CNC press brake was built in France in 2000. The machine designed for bending workpieces with a maximum length of 3100 mm, has seven numerically controlled axes (Y1, Y2, X1, X2, R, Z1, Z2) and 170 tonnes of press force. This allows for very high machining accuracy and, thanks to the deflection arrow compensation function, the desired angle is present along the entire length of the bent sheet. All machining parameters are programmed on the intuitive and easy-to-use AMADA CNC control located on the arm. The press was used for 15656 hours (5.5 years of operation at 8 hours per day). The total weight of the press brake is 12400 kg. Technical data of the AMADA HFE 170-3 L press brake - CNC controller: AMADA - maximum press force: 170 t (1700 kN) - number of numerically controlled axes: 7 (Y1, Y2, X1, X2, R, Z1, Z2) - maximum workpiece length: 3100 mm - deflection  ...

Sheet thickness: 6,00 mmKnife length: 200 mm Make Amada VERSA 204 Type VERSA 204 Year 1996 UNUSED Vario angle 135 Gr Sheet thickness (mm) L = 200 x 200 Sheet width (mm) T = 4 / 6 mm Depth rear gauge (mm) Table 1000 x 800 Never used !  

Sheet thickness: 6,00 mmKnife length: 200 mm Make Amada VERSA 204 Type VERSA 204 Year 1996 UNUSED Vario angle 135 Gr Sheet thickness (mm) L = 200 x 200 Sheet width (mm) T = 4 / 6 mm Depth rear gauge (mm) Table 1000 x 800 Never used !  

AMADA LC 3015 XI NT laser cutting machine was built in 2007. The machine designed for precise laser cutting of steel and aluminium sheets guarantees very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The machining process takes place on a stable work table using a 4 kW laser beam. The special table design also ensures free operator access to the workspace from all sides. The AMADA LC-3015 X1 NT laser cutting machine is equipped, for example, with a highly efficient resonator and HYFRA cooling device. The total weight of the machine is 11700 kg. Technical parameters of the AMADA LC 3015 XI NT laser - laser beam power: 4 kW - maximum sheet metal thickness (mild steel): 20 mm - maximum sheet metal thickness (stainless steel): 15 mm - maximum sheet metal thickness (stainless steel, nitrogen cut): 15 mm - maximum sheet metal thick ...

AMADA laser cutting machine LC3015 F1 4KW CNC AMNC Laser power: 4 kW Year of manuf. 2008 Max sheet size / max working area: 3070 x 1550 mm Cutting performance: Mild steel / black plate 20 mm Inox / stainless steel: 12 mm Aluminum: 10 mm Weight of the machine: 11,5 ton

AMADA LCG3015 laser cutting machine was built in 2013 in Japan by AMADA CO., LTD. The machine, designed for precision sheet metal cutting, is equipped with a reliable laser source of the highest energy efficiency. It generates a stable laser beam with a power of 3.5 kW and a thickness of only a few μm, which ensures very smooth and even edges along the entire length of the workpiece. All this is completed by an intuitive CNC control in which even the most advanced machining programmes are created in just a few steps. The AMADA LCG-3015 laser cutting machine weighs 8200 kg. Technical specifications of the AMADA LCG3015 laser - laser power: 3.5 kW - feed in the X/Y/Z axis: 3070/1550/100 mm - rapid traverse in the X/Y/Z axis: 120/120/80 m/min - cutting speed in the X and Y axis: 0-120 m/min - maximum workpiece weight: 920 kg - work table dimensions (L x W): 3000 x 1500 mm - work  ...

AMADA VIPROS 255 (2001) punching machine Ready for transportation and installation Maintenance and disassembly carried out by AMADA technical service Hours: 31,000 Capacity: 200KN Travel method: X and Y axes move the sheet, C axis for Auto-Index, T axis for the turret Control method: X, Y,T & C simultaneously, 4 axes control Driving Motors: FANUC AC Servo (X,Y,T,C,) Maximum sheet size: 1270 mm (Y) x 1270 (X) mm With 1 reset: 1270 mm (Y) x 2540 mm (X) Maximum axle travel: 1270 mm (Y) x 1270 mm (X) Maximum axes speed: X + Y = 82 m/min Punching precision: +/- 0.07 mm Repeatability: +/- 0.03mm Turret rotation 30 rpm: Bi-directional Number of stations: 31 Auto-Index Number: 3 Maximum hole diameter: 88.9 mm Blows per minute: 1000 1mm steps. 520 8mm pitch. 340 25mm pitch. Maximum punching thickness: 6 mm. (9 mm. with special jaws) Maximum sheet weight: 110 Kgs.

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

Amada Promecam GPS 3100 x 12 mm CNCCuttinglength: 3100 mm Max sheetthickness st 45: 12 mm Backgauge: CNC Electric motor (power): 15 kW Length: 3600 mm Depht: 1820 mm Height: 2120 mm Weight: 10 ton number of sheetholders: 16x

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

Anko dough mixer: Product number: 3059R Type: ABM-33 Serial number: PO202200591-2 Year of construction: 2022 Mixer: 80 litres Power: 3 x 380V, 50Hz, 2.2kW Dimensions: 1100 x 1450 x 1300 mm Bottom dicharge Anko dough sheeter: Product number: 3060R Type: ABS-220 Serial number: PO202200591-1 Year of construction: 2022 Width sheet roller: 220 mm Capacity: 100 kg/hr Thickness dough: 4 - 12 mm Power: 3 x 380V, 50Hz, 2.25kW Dimensions: 1300 x 950 x 1400 mm Anko gyoza dumpling machine: Product number: 3061R Type: AFD-888 Serial number: 1501093 Year of construction: 2022 Capacity: 6000 pc/hr Hopper: 46 litres Power: 3 x 380V, 50Hz, 3.5kW Dimensions: 2450 x 2000 x 2050 mm Weight: 1400 kg

The RPEH solenoid operated - hydropiloted valves are consisting of an RPE3-06 type solenoid operated directional control valve (see data sheet HA 4010) that operates a 4-way hydropiloted control valve with a connection surface in accordance with the ISO 4401 standards. They are available in various configurations and spool types. The pilot and the drain connections can be made internal or external by inserting or removing the accordant threaded plugs located in the main directional control valve. A wide range of configurations and different solenoid operated - hydropiloted directional control valve spool positions are available: – 4-way, 3-position directional control valve, with two solenoids; positioning of the spool in center position is obtained with centering springs. – 4-way, 2-position directional valve, with one solenoid and one return spring or two solenoid ...

Sheet thickness: 6,00 mmRoll width: 250 mmNumber of rolls: 21  Roll diameter: 30 mm Mechanical pressARKU - RM3025 + AH 1000 MACH-ID 8862 Make: ARKU Type: RM3025 + AH 1000 Year: 1992 Decoiler Max. width 350 mm Clamping area coil internal  mm Coil diameter 1500 mm Work load 1000 Kg Straigtner Width 250 mm Roll diameter 30 mm Number off rolls 21 units Working speed 40 M/Min Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2

Sheet thickness: 6,00 mmRoll width: 350 mmNumber of rolls: 9  Roll diameter: 30 mm Mechanical pressARKU - RM 3035 + AH 2000 MACH-ID 8861 Make: ARKU Type: RM 3035 + AH 2000 Year: 1995 Decoiler Max. width 350 mm Clamping area coil internal 470 - 530 mm Coil diameter 1500 mm Work load 2000 Kg Straigtner Width 350 mm Roll diameter 30 mm Number off rolls 9 units In feed rolls 2 units In feed roll diameter 90 mm Working speed 40 M/Min Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Length:3200mm Width:1500mm Height:2200mm Weight:3700kg

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

Mecanica guillotine shear Arrieta CGM 10/2. Typing clutch. Sheet metal length: 1050mm. Sheet metal thickness: 2mm. Rear stops. Power: 1.5hp. Ce. Year: 2001

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMIN ...

ATMA ATMACE 710/G screen printing machine was manufactured in 2012 in Taiwan by ATMA CHAMP ENT. CORP. The machine is used for precision printing of medium-sized items, i.e. posters, car stickers and advertisements, on both rigid and flexible flat substrates. The sliding vacuum table made of aluminium alloy with high resistance offers a large working area. Quick replacement and positioning of the screen frame, on the other hand, is ensured by a special gripper, equipped with a micro screen adjustment and pneumatic lock. The ATMACE 710/G screen printing machine can also be integrated into production lines to increase productivity. The total weight of the machine is 1290 kg. The offer also includes the AERORTERM ULTRATERM UV 1100/3000 drying tunnel, manufactured in 2009 by the Czech company AEROTERM a.s.. The machine, designed for curing UV inks and varnishes, is equipped with one row of ...

Printingmachine - Two Colour (perfector) Make Aurelia Model 702P Elite Year 1985 ? Maximum sheetsize 720 x 1020 mm Dampening Alcohol fiilm dampening with Miniweb chilling pump Perfecting 2/0 - 1/1 Details high pile delivery Available Direct

1 sided, sheet fed, thin film, thermal laminator for medium and long run lengths Max sheet size: 1060 x 1550 mm Min sheet size: 28.5 cm x 32 cm Max speed: 120 m/min 80 gsm to 650 gsm Small Footprint Siemens Electronics Heavy-duty build quality FEEDER Heidelberg Speedmaster feed head Rising pile, back separation, stream feeder Feed head processor controlled for accurate under-lap Max pile height of 1.1 m LAMINATOR Water heated chrome laminating roller Digital temperature control up to 135°C (275°F) Rubber counter-pressure roller Pneumatic nip pressure up to 6 metres tonnes Film mounted on a quick-change inflatable air-shaft Film roll slitting and perforating mechanisms Pneumatic clutch ensures precise film tension SHEETER Bump/burst separator runs in-line Features include adjustable pro-active anti-curl bar, secondary perforating mechanism, and in-feed hold roller ...

Autobond Mini 105 TPHES - thermal laminator year 2008 2 sided Max. sheet size: 106 x 106 cm (41.73 x 41.73) min. sheet size: 28.5 cm x 32 cm (11.5 x 12.5) Max. speed: 60 m/min (200 ft/min) 115 gsm to 650 gsm Heidelberg Speedmaster feed head Good Condition

Used lab homogeniser from Axomatic model MINIMIX 5 Lt. New 2015. Technical specifications supplied for the MINIMIX 5 Lt: Tank: - Type: vertical cylinder with flange - Bottom: cup-shaped bottom welded to the cylinder - Lid: cup-shaped welded to the flange with integrated silicone gasket, liftable - Jacket: with cup-shaped bottom, surrounding the tank - Insulation: on tank, made of mineral wool, surrounded by welded sheets Capacity: - Total: 6 litres - Working: 5 litres - Minimum: 1.5 Litres Materials: - Tank: AISI316 internally polished - Bottom: AISI316 internally polished - Lid: AISI316 internally / externally polished - Jacket insulation: AISI304 polished - Parts in contact: AISI316 internally polished - Frame facings: AISI304 satin-finished scotch brite type - Scrapers: TEFLON movable Operating conditions: - Tank: full vacuum / atmospheric pressure ...

AUTOMATIC LAMINATOR B&F MECCANICA DRY -Year 2004, High pile -Min paper thickness 110 grms/Sqm- Max 350/400 grms/Sqm -Max mechanical speed: 100 m/min -Min. format sheet: 300 mm x 280 mm -Max. format sheet: 1030 mm x 1400 mm -Max roll diameter : 400 mms. -Electric power machine: 24 kW -Compressed air: 6 bar -Automatic MABEG feeder, Suction feeder table -Diathermic oil-heated calander with MTA autonomous thermal unit -Automatic sheet separator -Automatic stacker in delivery -Complete italian made, In production, available in May

HIGH SPEED CREASING & PERFORATING MACHINE MAX SHEET SIZE 500 x 850 MM MIN SHEET SIZE 100 x 150 MM STOCK RANGE 80 to 600 GSM AUTOMATIC BOTTOM SUCTION FEED MINIMUM CREASE DISTANCE 0.1 MM MAX 100 CREASES PER SHEET UP TO 8000 SPH SPEED (A4) 3 Combs Cleaned, checked and tested In very good conditions

Fully automatic offset and digital Touch Screen Auto-Balance Temperature Pneumatic Pressure Sheets size : 210x297 – 380x700 mm Sheet weights : 130-350 g/m² Speed : 15 m/m (2000 sheets SRA3/hour – 1800 sheets B3 portrait/hour)

Pneumatic feeder with 2 air suction units Thermal oil sealed heating roller Cutting unit Sheets size : 530x750 – 220x220 mm Sheet weights : 130-350 g/m² Speed : 25 m/m (3700 sheets SRA3/hour – 1800 sheets B2/hour)

Fully automatic offset and digital Touch Screen Auto-Balance Temperature Pneumatic Pressure Sheets size : 210x297 – 380x700 mm Sheet weights : 130-350 g/m² Speed : 15 m/m (2000 sheets SRA3/hour – 1800 sheets B3 portrait/hour)

Reference ID PP-38306 Category Stitcher Manufacturer Bahmüller Model BCL 21/36 Year Built 2003 Max. Size 3600 mm Min. Size 800 mm Condition Good Location Europe Availability Immediately Machine Description Cutting width: max. 3600 mm, min. 800 mm Sheet depth: WM max. 2100 mm, WM min.: 350 mm Flap dimensions: L min: /gluing: 150 mm, L min: / inside stitching: 150 mm, L min: / outside stitching: 300 mm, L min: / taping: 150 mm, W min: /gluing: 250 mm, W min: / stitching: 350 mm, W min: / taping: 250 mm, W max: (right side only) 1450 mm, L=W min: (square): 500 mm Production speed: Stapling: 1250 KI/min., Gluing: 3500 B/h, Taping: 42 m/min. Material thickness: max.: 8 mm, min.: 2 mm

Bartell FSW-409 7/8in bead winding machine suitable for PCR tyres 12in to 20in consisting of: - 12 station bead wire let of unit. - Prodicon zig zag cutter Type Z/Z year 1988 (takes sheet compound max 750mm wide and cuts to suitable size for feeding extruder. - 60mm dia coldfeed extruder, L/D ratio 13:1, with 18.4kw DC variable speed motor and 3 x TCU's - Festoon section - Former unit with various Bartell formers available/included. - Siemens S5 plc controls.

Sheet Size max. 550 x 750mm Loading capacity max. 500kgs Interior platform size 620 x 940mm Opening of platforms min. 460mm - max. 1220mm

BAYKAL HNC 4110 hydraulic guillotine shears built in 2019 in Turkey are designed for precision cutting of workpieces with a maximum thickness of 10 mm. The machining process is performed by extremely precise cutting knives with adjustable gap between blades. The all-steel construction combined with a powerful hydraulic system additionally ensure the highest stability and machining performance. The BAYKAL HNC 4110 guillotine shears have been in use for a small amount of time – so far they have worked only 560 hours. The total weight of the machine is 15400 kg. Technical specifications of the BAYKAL HNC 4110 guillotine shears - HMI panel: SIEMENS SIMATIC HMI - maximum sheet metal length: 4060 mm - maximum sheet metal thickness (Rm