used Structural steel bending machines for sale

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

Centrifugal pump made of stainless steel.

Technical data: Pan working capacity: 150 Kg. Pan speed: 5 - 15 RPM Pan outside diameter: 48 (1219.2 mm) Pan mouth diameter: 19 (482.6 mm) Base construction: Stainless steel Drive motor: 2 hp 1440 RPM Height: 75 (1917.2 mm) Floor space: 61 x 50 (1548.9 x 1270 mm) Weight: 1550 lb (700 Kg) Advanced Specifications flow tab system: A key feature of the Flowtab system is the unique spraygun, designed by BWI Manesty to improve coating efficiency, reduce operational downtime; and simplify cleaning. The automatic clean-out facility prevents fluid blockages within the nozzle, even during extended production cycles; Even at low atomising pressures, the spray rate and pump speed of the Flowtab can be controlled manually via the portable console or, automatically, from the ACS control console, without adjusting the sprayguns. Noted for their ability to deliver fast, flexible and co ...

Stock # U2436 Used stainless steel lab size double cone powder mixer by ACH-MECH (PL). Total volume of mixing chamber 25 l. Working volume about 12-15 l, with maximal weight of batch up to 16 kg. Contact parts designed in stainless steel AISI 316L. Feeding inlet has diameter 200 mm and is closed with stainless steel lid. Discharge outlet has diameter 80 mm and has manually operated buttlerfly valve. Distance from discharge outlet to bottom support plate 730 mm. Mixer has also manually rised, plexiglass cover, equipped with safety switch. Machine is driven by el motor 1.1 kW, 1415 rpm, 230 /400 V , 50 hz. Working rotation adjustable in range from 4-18 rpm. Machine has local control panel, and is mounted on mobile pedestal, designed in stainless steel AISI 304. Includes technical documentation and CE certificate.

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataDrill capacity in steel: 2 - 22 mmMax. drill depth: 120 mmTable length: 500 mmTable width: 400 mmSpindle speeds:steplessfrom: 50 rpmup to: 4000 rpmPower: 1.5 HPMachine´s weight about: 150 kgOverall dimensions machine:Length: 400 mmWidth: 500 mmHeight: 1000 mm

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataDrill capacity in steel: 13 mmTable length: 400 mmTable width: 350 mmDepth of throat: 200 mmSpindle stroke: 120 mmSpindle speeds:number (steps): 10 from: 350 rpmup to: 5000 rpmmin.: 30 mmmax: 330 mmVoltage 50 Hz 3x: 380 VoltPower: 1.00 HPMachine´s weight about: 260 kgOverall dimensions machine:Length: 800 mmWidth: 550 mmHeight: 600 mm

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataDrill capacity in steel: 6 mmTable length: 310 mmTable width: 280 mmDepth of throat: 150 mmSpindle stroke: 50 mmSpindle speeds:number (steps): 8 from: 650 rpmup to: 12000 rpmVoltage 50 Hz 3x: 380 VoltPower: 0.30 HPMachine´s weight about: 50 kgOverall dimensions machine:Length: 600 mmWidth: 350 mmHeight: 650 mmVarious accessories:Drill chuck: 0 - 6.5 mmLamp

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Control: GE MARK CENTURY ONE PLUSTechnical datanumber of toolsDrill capacity in steel: 23 mmSpindle speeds :steps: 9 from: 42 rpmup to: 3500 rpmTable length: 820 mmTable width: 400 mmLongitudinal travel: 400 mmTransversal travel: 320 mmVertical travel: 470 mmFeeds: 1000 mm/minRapid traverse:: 3.5 m/minVoltage 50 Hz 3x: 380 VoltPower: 2.5 kW

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

Used fiber laser cutting machine BLM LT 9 Combo Fiber An automated device capable of processing closed and open profiles: pipes, square profiles, rectangular profiles and sheets. Basic information Manufacturer: BLM Adgie Year of manufacture: 2011 Power: 3kW The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Additional information - table dimensions: 3000x1500 mm - scope of profile processing: round Ø16÷225 mm square 16x16÷160x160 mm rectangular 16x16÷200x100 mm - Maximum lenght: 6000 mm - maximum cutting thickness of materials: black steel: 20 mm stainless steel 8-10 mm aluminum: 8mm Brass: 5 mm Copper: 5 mm

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A.. The machine, designed for machining workpieces with a maximum length of 1500 mm, is distinguished by the use of many state-of-the-art technical solutions. It thus meets all, even the most intensive challenges of modern business. The ADIRA BB3515 CNC press brake is equipped with a powerful electric drive , developed in Bluedrive technology. Compared to a standard hydraulic system, this drive is free of filters, seals and hydraulic oil. As a result, the machine is much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. Furthermore, ADIRA’s patented HEXA-C design concept minimis ...

ID3265 Adler B50 year/Year of construction 2020 approx. 1500 hours/ hours 3.1 t Well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5 t, standpipe with auger for pre-drilling, 110 m flushing drill pipe on steel pallet, complete maintenance was carried out at the end of 23. The machine was fitted with a new drill head from Eurodrill at the end of 2013 for approx. 20,000 euros. Water well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5t, standpipe with auger for pre-drilling, 110 m directional drill pipe on steel pallet, complete maintenance was carried out at the end of 23. At the end of 23, the machine received a new drill head from Eurodrill for about 20,000 euros.

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally ...

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally ...

Used stainless steel batch fluid bed dryer made by Aeromatic model Stre-30 G-W101. New 1978. Swiss production Wirbelschicht - Trockenungsaniage - Capacity of 150 liters of water evaporation / hr. - A shower - The heat exchanger - A blower - There is a buffer tank - The control panel - Channels are filter - Two tanks interchangeable - Worked at the pharmacy (product unknown) - A bag filter, co channels - Removed, not running around. Year - Complete documentation and schematics - Dimensions: Wed. 90 cm, length 170 cm, the total size of approx. 3 m height. Approx. 170 cm

Mobile pneumatic conveyor unit for powdery products, on base frame, with stainless steel feeding hopper (700 mm x 700 mm, incl. safety grid inside), blow-through rotary vane in stainless steel (200 mm Ø, 0,55 kW drive) by Seeger, Aerzener GMA-blower incl. Drive, air filter, compensation tank and switchgear cabinet.

AEW APC Slicer Automatic slicing machine Uoto 180 slices per minute From 2mm-50mm slice thickness sutable for bone in or bonless product stainless steel

all stainless steel belt width 640 mm natural gas 16 kW 414 kW heat capacity 3 x 400 V gas pressure 30 mbar

USED AGUILAR Y SALAS STAINLESS STEEL 11.500 LITRES TANK WITH AGITATION AND INNER COIL REF.: C9216 Vertical tank made of 304 stainless steel by AGUILAR Y SALAS with a capacity of 11,500 liters. With double height propeller agitation and internal coil at the bottom. On barckets. General characteristics: Manufactured by AGUILAR Y SALAS Material Stainless steel 304 Year built 1986 BODY COIL Design pressure atm 10 bar Design temperature 90 ºC 190 ºC Test pressure estanco 18.7 bar Volume 11.500 l 12 l Weight 1500 kg 30 kg Technical characteristics: Capacity 11.500 l Serpentine 12 l On Brackets Vessel outside diameter 2000 mm Vessel thickness 4 mm Vessel height 3500 mm Vessel height + funds 4320 mm Thickness top bottom 4 mm Bottom bottom thickness 5 mm Motor characteristics: Rotational speed 1390 rpm Reducer characteristics: Ratio 1-29 Rotati ...

USED STAINLESS STEEL 40.000 LITRES TANK REF.: C9070 Horizontal tank made of stainless steel by AGUILAR Y SALAS with a capacity of 40,000 liters. General characteristics: Manufactured by AGUILAR Y SALAS Material Stainless steel Year built 1987 Weight 4060 kg Design pressure atm Design temperature 35 ºC Test pressure lleno de agua Technical characteristics: Capacity 40.000 l Bottom type Klopper Vessel outside diameter 2800 mm Vessel height 5500 mm

Gryogenic liquid nitrogen container. Ideal for transport storage or dispensing of gryogenic liquids. Manufacturer: L?Air Liquide ( France ) Type: TCL 100 Capacity: 100 liter Material: Stainless steel On wheels

Stock# UG6345 Unused atmospheric cabinet dryer by Airflow Premier Industrial Oven (UK). Chamber construction mild steel. Inside dimensions of drying chamber: W 3250 mm x D 1850 mm x H 2050 mm. Working temperature range up to 60C. Dryer is equipped with 2.2 kW centrifugal fan, whch can give air circullation up to 4.2 air change per minute. Heating - electric - 15 x el heaters each with power 3 kW. Outside dimensions: W 3500 mm x H 2900 mm x D 2200 mm. Machine has local control panel.

suitable for nitrogen all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm

AJAN SHP 130 plasma cutting machine was built in 2015 in Turkey. This highly efficient and precise machine is used in the thermal cutting of stainless steel, structural steel and aluminium sheets. In the machining process, the AJAN SHP 130 1500 X 3000 plasma cutting machine uses a plasma torch, which is powered by a reliable 130 A plasma source. The lightweight design made of a stiffened profile additionally ensures that cutting is performed with the utmost stability, even during the most intensive machining. Any contamination generated during machining is eliminated on an ongoing basis by the extraction table, increasing operator comfort and safety. To this date, the machine has run for a small amount of time and is in perfect condition. The work table grate was replaced with a new one during a recent upgrade. The offer also includes optional equipment, which includes a torch holder  ...

Three separate oil coolers mounted in steel frame. Motors data: 380-420 / 660-720 V, 1460rpm, 11kW - 3 pcs

AKW Engineering Ltd Compact Spiral Freezers Currently building 4 bespoke compact freezers, using reconditioned top quality stainless steel framework. All belts are 510mm wide. Units are constructed on a hot dipped galvanised sub-frame, for easy transportation and relocation. All with new insulated enclosures and doors. Wiring and all serviceable components are new. All with built in belt wash spray bars. Choices of freezing capacities, evaporators and refrigerants.

Max tube diameter 76 mm Max thickness 3 mm Max bending degree 180 Bending radius max 260 mm

Power : 30 Kw Rolls diameter : 550 mm Shaft diameter : 240/220 mm Bending speed : 0-7 m/min

Length: 2600 mmRoll diameter: 10 mmAxial travel: 0 mm Make Akyapak 10 mm Type AHS 2600 Year 2004 4 walzen rundbiegemaschine akyapak 2600 x 10 Sheet thickness (mm) Bend T = 10 mm Bending length (mm) Pre T = 8 mm Number of rolls 4 roller Diameter = 210 / 190 Power = 7.5 kW Speed = 4 M / Min

Length: 2600 mmRoll diameter: 10 mmAxial travel: 0 mm Make Akyapak 10 mm Type AHS 2600 Year 2004 4 walzen rundbiegemaschine akyapak 2600 x 10 Sheet thickness (mm) Bend T = 10 mm Bending length (mm) Pre T = 8 mm Number of rolls 4 roller Diameter = 210 / 190 Power = 7.5 kW Speed = 4 M / Min

suitable for standard crumbs all stainless steel belt width 400 mm with air knife 2,4 kW adjustable speed mobile with outfeed belt dimensions (l x w x h) : ± 2.250 x 950 x 2.300 mm

belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt with outfeed belt mobile dimensions (l x w x h) : ± 2.200 x 800 x 1.200 mm

Vacuum cutter Alexanderwerk Body made of stainless steel Volume: 65 liters Dimensions: 130x120x130cm Electrical power: 15/20kW

Aleanderwerk KN 20 Zwilling Combination machine consisting of bowl cutter and meat grinder Bowl cutter with 20 l bowl volume Knife head with 3 pcs. included Two cutting speeds: 1. 1500 RPM. - 2. 3000 RPM. Stainless steel bowl Including thermometer for temperature indication Meat grinder 82 mm diameter Two grinding speeds Including brand new cutting set Machine sits on a movable frame with 4 rolls

STOCK NUMBER U2064 Description: Used line for compacting powders by ALEXANDERWERK (Germany). Line consist of: - feeding system - includes: 50 l powder container, rotary valves, vacuum pump, piping and bag filter. - horizontal, twin screw, feeder with adjustable working speed in range 0-77 rpm. - granulating system - includes - preparation granulator and two precise granulators, type RFG 150N. All granulators works with adjustable speed in range 0-112 rpm. - intermediate tank with screw type agitator, working with adjustable speed in range 0-20 rpm. - roll compactor ALEXANDERWERK model WP170/120V, designed in stainless steel. Machine has two rolls, each with width 120 mm x diameter 170 mm, mounted vertically. Rolls are working with adjustable speed in range 0-20 rpm. Driven by gearbox and electric motor 7.5 kW. Rolls are pressured via hydraulic device. Maximal pressing power up ...

We offer a used stainless steel tank from Alfa Laval, built in 1977, in good condition. Capacity 15,000 liters. Agitator with setting option slow/fast and pulse/pause. Spout with pneumatic valve. There is a spout, which was also used for filling. The tank is CIP capable, it has integrated spray balls. Previously used as a raw milk tank. We offer a used stainless steel tank from Alfa Laval, built in 1977, in good condition. Capacity 15,000 litres. Agitator with 'slow/fast' and 'pulse/pause' settings. Outlet with pneumatic valve. There is an outlet that was also used for filling. The tank is CIP-capable and has integrated spray balls. Previously used as a raw milk tank.

2 x Alfa Laval Cream Separators Condition : Incomplete Used for spare parts Available are : Bowls, Plates, Body’s stainless steel , motor, 1 x cream separator valves and internal gears.

We offer a used stainless steel tank from Alfa Laval, built in 2009, in good condition. Capacity 3,000 liters. Tank lying. propeller agitator. Own cooling circuit via refrigerant. Own cleaning program (start manually). Previously used as a (flow) milk tank in front of a filling machine. We offer a used stainless steel tank from Alfa Laval, year of manufacture 2009, in good condition. Capacity 3,000 litres. Tank horizontal. Propeller agitator. Own cooling circuit via refrigerant. Own cleaning programme (manual start). Previously used as a (continuous flow) milk tank in front of a filling machine.

Used- Alfa Laval BRPX-417-SFV-31CGL-50 Desludger Disc Centrifuge. 316 Stainless steel (product contact areas), maximum bowl speed 4180 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, sludge cyclone, belt drive configuration, drive motor

Stock number: UG6204 Second hand, refurbished, stainless steel plate heat exchanger by Alfa Laval type CLIP 6-RH (C6). Plates designed in stainless steel AISI 316L. Working volume 68.2 l. Working pressure 16 bar, test pressure 21 bar. Working temperature in range from 0 up to 110 C. Connections are DIN 11851 DN50. Exchanger is mounted on stainless steel frame. Gaskets designed in NBR, mounted without a glue, type clip-on. Unit is cleaned and leak tested. Last time used on food. Includes stainless steel covers.

Decanter Alfa Laval Foodec 700 in excellent conditions. Control Panel not included Decanter Foodec 700 Yr : 2012 Description Bowl : 2 or 3 phase version: 2 phases - open Maximum main speed: 3100 rpm Bowl length: 2565 mm Bowl diameter: 650 mm Beach angle: 20° Solids discharge type: 360°-type with 8 wear liners Solids discharge radius: 175 mm Wear protection solids discharge: Wear liner in tungsten carbide, 8 pieces Solids transportation aids, cylindrical section: Ribs Solids transportation aids, taper section: Ribs Material - hubs: AL 111 2329 (Duplex stainless steel) Material - bowl shell: AL 111 2329 (Duplex stainless steel) Material - bolts: A4-80 (AISI 316) Liquid outlet, type: 8 Standard Plate Dams Conveyor : Features: Windows / Double cone Feed zone type: Esbjerg with exchangeable wear liners (EU3) Pitch: 1x230 mm Flight inclination: Perpend ...

New Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

Used and overhauled Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

Totally reconditioned vertical Alfa laval MAB206S centrifuge with stainless steel bowl, use for mineral oil, manual centrifuge for the expulsion of solids. +/- 10,000 l/h (Hydraulic) Engine 7.5 Kw 220/380 V 1430 Rpm.

Centrifuge manufactured by ALFA-LAVAL Model: MAPX 204 T-14-60 Totally reconditioned vertical Alfa laval MAPX 204 T-14-60 centrifuge with stainless steel bowl, self-cleaning centrifuge with partial and total discharges for the expulsion of solids. New electrical panel option. Hydraulic capacity: 3000 l / h. (Hydraulic) - Motor power: 2.2 KW - Max. of the drum: 5,500 rpm.

Used Self-cleaning milk centrifuge. Technical parameters: type: Alfa – Laval MRPX 214 self-cleaning nominal capacity 12,500l/h Siemens control and inverter for the main drive motor foundation slab made of acid-resistant steel water treatment kit made of acid-resistant steel main engine 15kW

Used self-cleaning disc centrifuge made by Alfa Laval, type: MRPX 410 TGD 74. New 1988. Capacity: 7.500 liters/h. Technical data: - Function: milk separator, - Milk skimming capacity: 7.500 l/h, - Whey skimming capacity: 10.000 l/h, - Worm wheel shaft: 1420 - 1500, - Total installed power: 18.5 kW (1460 rpm), - RPM counter: 118-125, - Includes tools (wrenches), control, base, - Voltage: 380V / 50 Hz / 3 phases, - Stainless steel.

Centrifuge manufactured by Alfa laval model MV15 3S 21 1H with cast iron structure, 316 stainless steel bowl and all parts in contact with the product in stainless steel. Refrigerated centrifuge with a maximum speed of 16,000 rpm.

Alfa Laval PAPX 307 SGD -11G Purifier Alfa laval PAPX 307 purifier Bowl - stainless steel Hydraulic capacity 8.000l/h Motor 7.5 kW

Used decanter made by Alfa Laval, model: UVNX 314. Two motors: 7,5 kW and 3 kW. Parts in contact with the product in stainless steel. Max drum speed 3250 rpm. Documentation available. The machine was used for edible oil.