used Thermo forming machines for sale

Material : PET-PS-PP-PLA - XPS // Forming Area (Vxh): 750x550

# HIDROBRASIL 50 T Heating Press with Sliding Table (600x600mm) If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! 50 T top piston heating press, in double column brackets suitable for continuous shift operation, with these basic data: - With a heating level - Idle speed up to 10 mm/sec (adjustable via rotary control) - Opening speed up to 40 mm/sec - Starting pressing speed 8 mm/sec - Table size/heating plate size 522 mm deep, x522mm wide - Plunger size/heating plate size 498 mm deep, x498mm wide - 2 heating plates, electrically heated, up to 200 degrees - Oil temperature monitoring - Circulating oil cooling on the hydraulics - Pressure Holding Valve 0 to 3600 sec - Pressure adjustment from  ...

M. No.: 322 Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Thermoforming machine Illig RDM-50 K • Year of built 1994 • Suitable for processing PS and PP • Forming area 500 x 280 mm • Max material width 525 mm • 200 mm air cylinder for per-stretcher • Servo driven main engine and material transport Specifications • 7 upper heating zones • 7 lower heating zones • Tool temperature control • Separate down holder cooling • Material sag control Additional equipment • Foil unwinding station • Endless stacking unit Good condition, available immediately

ILLIG RDM54K, age 2006 Preheater ILLIG VHW 72, 2-Roll ILLIG RDM54K with Indramat Servomotor Indexing Max. Film width 545 mm Double Heating, Heating Capacity 45.10 kW Max. Form area: 520 x 300 mm Indramat Servomotor Plug Assist Max. depth Draw: 125 mm Auto Transport Rail Spreading for PP Auto. Sheet Sag Control Inline Counter/ Stacker ILLIG SZA Inline Grinder ILLIG RS75b (High Version) with blower Siemens SIMATIC MULTI Panel Color Display, with Touchpad Controls Siemens S7 PLC

Vacuum forming machine for the production of PS, PVC, PET, blister, tray packaging. The thermoformer works separately forming and punching. The machine is in very good condition and was only used as a back-up machine for 16 years. It has been cleaned and extensively tested. so that it is immediately ready for use. Currently, a tool for trays in the size 125x176 mm is installed (forming tool 3-fold, negative, top), tool size approx. 188x408mm. We are also happy to put you in touch with a very good toolmaker who can produce format tools according to your wishes. Equipment of the machine: Moulding area 350 x 500 mm Film width max. 540 mm Moulded part height max. 100 mm positive - Top heating longitudinal row control - Underheating longitudinal row control - Strip steel cut heating - Forming station pneumatic, undertable as cooling plate - Needle chain transport with servo  ...

// Forming Area (Vxh): 704x515

ILLIG SZS73 Counter Stacker, age 2007 Effective Working Area: 740 x 340 mm Max. Part Height: 150 mm Formed Part Stacking Length: 800 mm Siemens S7 PLC Controls Siemens SINAMICS Motor Drives Rittal Control Cabinet Cooling Unit with Temperature Display. This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line. With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production Condition, it is clean and in a very good Optical condition as well

ILLIG UA 200 G thermoforming machine was built in 1990 in Germany. This highly efficient machine is used in the production of high-quality plastic parts, such as tubs, containers and car parts. As the ILLIG thermoforming line is equipped with two material feeders, the thermoforming process is fully automatic and also allows machining in sheets or from a roll. Technical data of the ILLIG UA 200 G thermoforming machine - maximum mould dimensions (L x W): 1960 x 980 mm - minimum mould dimensions (L x W): 860 x 720 mm - total heating capacity: 87.2 kW - maximum operating pressure: 10 bar - material feeder (2 pcs.) - power supply: 3x 380 V; 50 Hz

Material : PS, OPS, EPS, PP, PE, PVC, PET, PLA // Forming Area (Vxh): 760x540

LEISTER TRIAC heat gun, heat gun. Embossing on the device: K.LEISTER TYPE TRIAC CH-KÄGISWIL Motor 60W 220V ~6.6A Max 1460W 12820 Made in Switzerland GS S+ Used, very well preserved with signs of wear. Includes accessories, as pictured. Two-stage Cable length 3m Machine for processing and welding plastic geomembranes, shrinking plastics, films and other applications.

OMSO DM385 Automatic machine for dry offset printing in upto 6-Colors over the entire surface of oval, square or rectangular Tubs plus 2 x Colors on the base of the Tubs. Print Roller self cleaning function when colors are changed. Tub stacks fed by an automatic Elevator Tray Feeder. UV Curing Tunnel, for the 4 x Tub side-walls & for the Base. Precision Counter/ Stacker, delivers counted magazine stacks. Optical centering/ registration device for the Printing Plates via a Telecamera and Monitor. Machine can print upto 2 x Colors on the Tub-Base, another two Print Heads can be retrofitted to achieve 4 x Color printing on the Tub-Base. Machine can be preset for HD Printing. Central Operator Control Panel Modern PLC machine controls. Technical Specifications: Automatic Elevator Tray Feeder Auto-Conveyor to Main Print Unit Universal Screw Denester ARCOTEC CG30-2 Corona pretre ...

Used POLYTYPE BDM 501, 6-Color Round Cup Printer, age 1994 Consisting of :- Automatic Elevator Tray-feeder Cross Conveyor to main Print unit Universal screw Denester CUBITRON Corona Pretreatment System 8-mandrel Indexing Turret, with Mandrel Holders for Cups 6 x individually hinged dry-offset Print Heads Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer 2 x Form Rubber Rollers dia. 71 and 100 mm 2 x Oscillating rollers 2 x Idler Rollers 1 x Ink Transfer roller (Ductor Roller) 1 x Ink Fountain Ductor Rollers water cooled Ink Washing System on Print Heads UVITERNO Dual Lamp UV Curing-On-Mandrel Dual Belt Take-off with Air Assist Short conveyor to counter Stacker station Return Elevator Tray Feeder Max. Cup dia. 135 mm Max. Height of Cups 130 mm, Min. height of cups 35 mm Max. Printing ...

POLYTYPE BDM 611/ 916, 8-Color Cup Printing Line, age 1999 Consisting of: Elevator Tray Feeder Cross Conveyor feeder Universal screw Denester ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester 8-mandrel Indexing Turret, with Mandrel Holders for Cups UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray. Max. Cup dia.130 mm Min. Cup dia. 60 mm Max. Height of Cups 150 mm Min. height of cups 35 mm Max. Printing Length : 362 mm Taper 2 - 10 degs Max. speed depending on size & shape of Cups: 36,000/ hr Siemens S5 PLC Controls Siemens CORTOS OP25 display with Touch-pad Controls.

Machine made in Poland in the year 2014. Max working area: 2450 x 1450 x 900mm. Vacuum. Control Omron. Total power 105kW. Plastics suitable for processing: ABS, PMMA, PVC, Polystyrene, and many others. Very good condition, machine is under power on workplace. Currently the machine is used occasionally. Transport dimensions - two segments: 1. 3650 X 2100 X 3350mm. 2. 3900 X 2100 X 3350mm. Total weight: 8000kg.

Material : PP, PS, APET, CPET, PLA, OPS, EPS, PVC // Forming Area (Vxh): 780x570