used Tilting spindle moulders for sale

Robust swivel milling machine swivels from -45 to +45 degrees Swivel milling machine in very good equipment A treat for every Hofmann fan Positioning control in 3-axis for spindle height, spindle inclination and stop complete. Programs can be saved All three axes can be positioned. Adjusting the individual jaw with SIKU counter Swivelling control panel at eye level for control Manual movement of each axis and positioning to the set point Pole-switchable drive motor 4.7 / 6.3kW with automatic motor brake R/L Barrel Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 125mm, electrically adjustable Six speeds 3000, 4000, 5000, 6000, 8000 and 10,000 rpm Spindle diameter 30mm Stop is electrically adjusted Electric spindle locking for tool change Table with table slider instead of table rings Planed machine table 2750mm long Pull-out ...

Table dimensions: 800 x 1.780 mmMotor output: 5/6 kWSpindle diameter: 30/40 mmreus: 3/4,5//9 U/minWeight: ca. 1.100 kg: Ja : Ja : Elektrisch swivellable: -5° bis +45° °: Elektrisch tool taper: MK 5 height adjustment: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Martin T25 Swivel spindle milling machine with 5 axis control Brand: Martin Type: T25 M-No.: V252368 Year of Make: 1998 Engine power: 7.5/9.5 kW or 10/13 hp, 2 speeds Dalander engine Swivel milling spindle: -5° to +45° Milling mandrel: ø30 mm Spindle mount: ISO quick-change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,400 mm and table widening (=extendable support) Control panel: CNC control at eye level with LCD screen Spindle height CNC-controlled electromotive spindle height adjustment (program controlled or manual control) Tilt -5° - +45° CNC-controlled electromotive angle adjustment (program controlled or manual control) Stops: CNC-controlled electromotive adjustment of the two stops in relation to the milling mandrel (program controlled or manual control) CNC-controlled electr ...

Martin T26 Swivel milling machine with axes Digital display and speed control of the 7.5 kW spindle, tenon table Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V409217 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Engine: 7.5 kW, 10 hp with frequency-controlled speed Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change  ...

Martin T26 Swivel milling machine with axis digital display and 7.5/9.5 kW-2 speed spindle Brand: Martin Type: T26 M-No.: 2005 Year of Make: V453599 Control: Electrical adjustment & digital readout; Spindle height & inclination. Control panel: Machine stand Motor: 7.5/9.5 kW, with 2 levels of speed adjustment Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° electrically adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Electro-pneumatic spindle locking mechanism for tool change Milling spindle lubrication with long-term grease via central lubrication Speeds: 7.5/9.5 kW - 2 levels speed control Cone of the milling spindle: SK-40 with mandrel fix quick-change system Table size: Cast iron table  ...

Martin T26 Swivel milling machine with axes, digital display and speed control of the 7.5 kW spindle Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V415216 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Motor: 7.5 kW, 10 hp - 220 V with frequency-controlled speed Milling spindle: ø50 mm spindle met SK40 en Dornfix quick-change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change Millin ...

Martin T 26 Swivel Drums with 4-Axis CNC Control Brand: Martin Type: T26 CNC M-No.: 2002 Year of Make: V432822 Control: 4-as CNC besturing; Hoog-Laag, Tilt, Table Ring Positie, Frees Aanslag Control panel: Op ooghoogte en draaibaar Remark: Special colour scheme Martin 75 years old Ral 7035 & 6004 Engine power: 7.5/9.5 kW , 6.8/8.2 PK with 2 toeren motor (verdere toerentallen door riem omleggen) Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm freesspil met SK40 en Dornfix-snelwisselsysteem Height adjustment milling spindle: Electric hoogteverstelling van de freesspil 150mm met snel- en kruipgang schakelaar IJk-apparaat voor de hoogte instelling van het gereedschap Elektro-pneumatische vergrendeling van de frees-spil d.m.v. keuzeschakelaar Freesspil-smering met duurzaam vet vanaf centraal smeerpunt Speeds: 2 toerenmotor 3000-6000 tpm en 4.500-9000 ...

Robust T 26 swivel milling machine swivel from -45 to +45 degrees with 2-axis positioning control Duocontrol Swivel milling machine in very good equipment A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L Barrel Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed in the upper display, which is then adjusted at the stop, so that adjustments can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel fix quick-change spindle with torque wrench Electrically adjustable stop, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of the height and stop Stop with lifting device can be swi ...

MARTIN T27 FLEX with CNC 4-axis control, electric height adjustment of the feed T27FX/1-a Swivel spindle milling machine T27 FleX in CE version with infinitely variable speed control T2704-a Stepless speed control with 9.5 kW motor. (13 hp) 1,000 – 12,000 rpm, incl. T2711-A Digital Display Insertion Stop in Control T2712-a electric motor. Positioning of the milling fence T2714-a electric motor. Positioning table opening for WZ Ø70-250 T2715-a electric motor. Positioning Feed Support T2731-a Table extension on both sides + pull-out workpiece support T2745-A Swing Away Device Milling Fence T2770_85-a milling mandrel with HSK 85 mount and PowerLock (compatible with Weinig PowerLock) T2773-a Milling mandrel HSK 85 Power Lock ø.. Mm

Equipment/Technical data: - Motor power: 7.5 kW - Speeds: 3,000, 4,000, 5,000, 6000, 8000, 10,000 rpm, speed change by belt reversal / pole shift - Milling spindle: DornFix quick-change system, steep taper SK 40 (Ø 30 x 140 mm) - Spindle stroke: 125 mm - Milling stop: adjustable by handwheel with digital display, with swivel device - Stop ruler (right): adjustable by handwheel with digital display - Tool diameter: max. 250 mm in the milling fence / max. 350 mm in slotted hood (speed limited to 4800 rpm) - Table extension on both sides (length approx. 2,405 mm), with extendable workpiece support (length approx. 3000 mm), 700 mm extendable - Stop for insertion milling - Centrex Guard - Maintenance equipment: Oil central lubrication (oil flow regulator) with manually operated pump - Extraction nozzle: at the milling fence and under the table each Ø120 mm, minimum extraction  ...

Table dimensions: 1.700 x 750 mm mmMotor output: 7,5 kWSpindle diameter: 30 / 40 mmreus: 1500/3000/4500/6000/9000 U/minWeight: 680 kg: -45° bis +45° height adjustment: 100 mm: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panhans 245 Easy Swivel Spindle Milling Machine Brand: Panhans Type: T26 CNC M-No.: 245 Easy Year of Make: 2008 Control: 2-axis electric control, spindle height and inclination, 2-fold handwheel adjustment with digital readout stops together and right stop in offset Control panel: Eye level, Rotatable Motor power: 7.5 kW Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm with SK40 and mandrel fix quick coupler Height adjustment milling spindle: Electric height adjustment with fast and creep gear Adjustment range 150 mm Electro-pneumatic milling spindle locking mechanism Central lubrication with long-lasting grease Speed: Frequency controlled, with digital display, automatic brake, central lubrication Spindle holder: Mandrel snelwisselsysteem (pneumatic locking) Table size: Table widening on both sides, 2405mm with extendable support front Axis  ...

SPECIFICATIONS: Spindle: Ø 40 mm Table size: 1000 x 1100 mm Installed power: 7.5 HP Electronic height/tilt adjustment

SPECIFICATIONS: Work table: 1200 x 730 mm Shaft: Ø 35 mm Manual swivel Manual adjustment of the direction of rotation Speed: 3000/10000 rpm Installed power: 5.5 kW EQUIPMENT: 3-roller feed

SPECIFICATIONS: Spindle: Ø 35 mm Spindle inclination: -10 to 45 degrees Height adjustment spindle Adjustment of the direction of rotation Adjustable speed from 3000 to 10000 rpm Installed power: 5.5 kW EQUIPMENT: 1 4-roller drive with variator MAGGI VARIOSTEFF 4

SPECIFICATIONS: Table size mm: 2540 x 740 Spindle diameter mm: 35 Spindle inclination: 0°-45° Speed: 3000/10000 rpm Voltage: 3800 volts Equipped with: - Electronic programmer for spindle stroke and spindle inclination - 4-roller feed

T45 TPL spindle moulder with tilting shaft with: - 2500mm long tops and removable front bar - Manual shaft tilt from -5° to +45° - manual lifting of the shaft - shaft diameter 35mm, adjustable boot - Motor shaft 4 kW / HP 5.5 , 380 volts - 4 rotation speeds 3200/4200/6000/8000rpm - with EUROPA 3-wheel drive – 4 speeds - year 2017, CE regulations Availability from February 2025