used Tool Carts for sale

5 axis X-Axis 800 mm Y-Axis 800 mm Z-Axis 600 mm Interference circle diameter 1070 mm Distance Spindle Up to 823,5 mm Machine-Table Load 1000 Kg Maximum rapid travel X/Y/Z at TCP max 75 m/min Cutting-Tool Interface HSK-A63 Motor Spindle Power at CDF 25% max 50kW Engine Spindle Torque at CDF 25% max 187 Nm Machine weight 13000 kgs Wiring diagram: 2526-95-64934955 Resy Filtration system Model : 14-P00449-3 Serial : KBF- 452/500 Erowa pallet changer Model RobotEasy Serial number ERE1364 Year 2014 Weight 1300kgs Hyfra Pedia chillers Model sigma 7-s

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. Distinguished by its state-of-the-art solutions, the machine performs the machining process on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSolutions ATMS 1325 m ...

AVIA VMC 1000 CNC machining center was built in 2017 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A.. The machine, distinguished by its extensive machining capabilities and state-of-the-art technical solutions, will meet any, even the most demanding challenges. Workpieces with a maximum weight of 1000 kg are machined by an extremely fast spindle with thermo-stabilisation, which, combined with precision cutting tools, guarantees excellent milling results. On the other hand, the machine’s high-quality construction with sliding doors offers maximum stability in machining by effectively eliminating any vibrations generated during milling. The AVIA CNC vertical machining center is offered with an extensive range of equipment, including toolholders, digital axis servo drives and the intuitive SIEMENS numerical control with ShopMill 3D overlay. The total weight of the machine is 5300 k ...

AVIA X-5 1250/630 CNC vertical machining center was built in 2015 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for, among others, precision milling, drilling and threading of workpieces with complex geometries in 5 axes. All these machining operations are performed by a high-speed electro-spindle located on a tilting working head. The tilting head, in turn, offers the possibility to use shorter tools and select the optimum cutting angle. The AVIA X-5 5-axis CNC machining center is offered with an extensive range of equipment, including a rotary table, measuring probes and a intelligent HEIDENHAIN CNC controller. The total weight of the machine is 10000 kg. Technical specifications of the AVIA X-5 1250/630 CNC milling machine - number of axes: 5 (X,Y,Z,B,C) - feed in the X/Y/Z axis: 1250/700/725 mm - B axis rotation range: -110°/+45° - C axis rota ...

Manufacturer AWEA Model VP 2012 Year 1998 FAGOR 8055MC CNC Table Surface 2,200 x 1,100 mm Max weight allowed on table 3,500 kg. Longitudinal travel (X Axis) 2,000 mm Cross travel (Y Axis 1,200 mm Vertical travel (Z Axis) 760 mm Distance between columns 1.300 mm. Rapid Traverse (X Axis) 15 m/min. Rapid Traverse (Y, Z Axis) 12 m/min. Taper BT-50 Main spindle speed 5,000 r.p.m. Main spindle power 37 kVA Speed ranges 2 Automatic tool changer (ATC) INCLUDED Positions in tool magazine 30 Internal coolant 20 BAR INCLUDED Coolant deposit capacity 1000 l Portable handwheel INCLUDED 2 longitudinal chip conveyor INCLUDED Cross chip conveyor INCLUDED Rigid taper INCLUDED Total power 40 kVA Machine Weight 16,000 kg. Large amount of tools and accessories INCLUDED

BRIDGEPORT VMC 600/22 Digital CNC machining center was built in 2000 by the English brand Bridgeport Machines Inc. The machine, equipped with among others 4th axis and a 22-position magazine, is used for precision machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a reliable spindle with an optimised speed range, which is driven by a powerful motor. This power allows full utilisation of the cutting tools in any, even the most intensive, production process. All this is complemented by the HEIDENHAIN CNC control, which allows advanced programmes to be created in just a few steps. The BRIDGEPORT CNC vertical machining center weighs 2500 kg. Technical data of the BRIDGEPORT VMC 600/22 Digital CNC milling machine - CNC controller: HEIDENHAIN TNC 426PB - feed in the X/Y/Z axis: 600/410/520 mm - rapid traverse in the X/Y/Z axis: 40/40/20 m/min  ...

CHIRON FZ 18 KL CNC vertical machining center was built in 2000 in Germany by CHIRON Werke GmbH & Co. KG. The machine is used for precise, multi-axis machining of workpieces with complex geometries. For this task, the work space has been equipped with reliable components in the form of, among others, a hydraulically clamped spindle and a 40-position tool magazine. In addition, in order to ensure excellent movement dynamics, all linear axes (X,Y,Z) are driven by a high-performance servomotor with HFUC 50-100 harmonic transmission. The CHIRON FZ 18K L HIGH SPEED CNC machining center is offered with a wide range of equipment, including e.g. a 4th axis that is fully integrated into the numerical control and operated via M-codes. The total weight of the machine is 10000 kg. Technical specifications of the CHIRON FZ 18 KL milling center - feed in the X/Y/Z axis: 2000/520/630 mm - maximum  ...

CINCINNATI ARROW 1250 CNC vertical machining center was built in 2001 in the United Kingdom by CINCINNATI MACHINE U.K. LIMITED. The machine, distinguished by its high reliability, productivity and precision, is used for the economic machining of workpieces. The machining process is performed inside a large work space, equipped with, among others, a 21-position tool magazine and a high-speed spindle. Its high-quality design eliminates any vibrations generated during milling, guaranteeing the highest possible stability during even the most intensive challenges. The offered CINCINNATI ARROW 2 1250 CNC machining center has undergone regular maintenance and servicing. The machine is after an spindle overhaul and the replacement of guides and screws in the X and Y axes. The total weight of the machine is 6000 kg. Technical specifications of the CINCINNATI ARROW 1250 CNC milling machine - C ...

CINCINNATI ARROW 500 CNC milling machine built in 1999, is the perfect choice for precision machining of workpieces in series and unit production. The machining process is carried out using reliable components in the form of tools taken from a 21-position magazine and a high-speed spindle. During machining, the extremely stable machine design effectively dampens any vibrations and oscillations, resulting in improved workpiece surface quality and increased tool life. The CINCINNATI CNC machining center also features an intuitive CNC controller, which allows the process to be quickly and easily programmed and controlled. The total weight of the machine is 3050 kg. Technical specifications of the CINCINNATI ARROW 500 milling center - CNC controller: ACRAMATIC 2100E - number of axes: 3 - feed in X/Y/Z axis: 510/510/510 mm - work table dimensions (L x W): 520 x 700 mm - maximum spindl ...

For sale good working CNC milling machine Deckel FP4 AT with two vices and several tools.

DECKEL MAHO DMC 103 V CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine designed for efficient 3-axis machining of workpieces is an excellent choice for any industrial plant. The machining process is performed inside a fully illuminated workspace using reliable cutting tools and a high-speed spindle. The design of the machine perfectly dampens any vibrations and oscillations generated during machining, guaranteeing maximum stability during even the most intense challenges. All of this is complemented by the intuitive SIEMENS CNC control, which allows advanced programmes to be created in just a few steps. The offered DECKEL MAHO CNC vertical machining center has worked 20938 hours to date. Technical specifications of the DECKEL MAHO DMC 103 V CNC milling machine - CNC controller: SIEMENS SINUMERIK 810D - number of axes: 3 - feed in the X/Y/Z axis: 10 ...

DECKEL MAHO DMU 50 EVOLUTION CNC machining centre was manufactured in Germany in 1999. The machine designed for precision machining of workpieces, has a high-quality steel construction, equipped with the best components. The machining process of metals is performed on a 500 mm long and 380 mm wide milling centre work table, using a powerful 15 kW spindle, guaranteeing excellent precision and a significant reduction in milling time. The CNC milling machine has 5 axes (X,Y,Z,C,B) with feeds of 500 mm (X axis), 420 mm (Y axis), 380 mm (Z axis), 180° (C axis) and 360° (B axis). A wide range of equipment is offered with the vertical machining centre, including: a control panel with HEIDENHAIN TNC 430 CNC control installed, a capacious tool magazine and a workpiece probe. The total weight of the machine is 6000 kg. Technical data of the CNC DECKEL MAHO DMU 50 EVOLUTION milling centre  ...

DECKEL MAHO DMU 60P CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine with its extremely sturdy construction was designed for the most intensive 5-axis workpiece machining. Inside the large working area, there is, among others, a 24-position tool magazine and an electro-spindle, which rotates at a maximum speed of 12000 rpm. All of this is complemented by an advanced HEIDENHAIN CNC control with an intuitive interface, where machining programmes are created in just a few steps. The DECKEL MAHO milling center has had only one owner to this date. Technical parameters of the DECKEL MAHO DMU 60P milling center - number of axes: 5 - feed in the X/Y/Z axis: 600/650/550 mm - maximum electro-spindle rotational speed: 12000 rpm - minimum electro-spindle rotational speed: 20 rpm - electro-spindle drive power: 15 kW - tool holder: SK-40 - operating hours: 7 ...

DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...

DMG MORI CMX 70 U CNC machining center was built in 2018 in Poland by FAMOT Pleszew Sp. z o.o.. The machine, designed for precision five-axis workpiece machining, is distinguished by the use of reliable components and modern technical solutions. Supported at 4 points, the cast mineral bed, perfectly dampens any vibrations while ensuring proper heat extraction from the workspace. Inside the machine’s large, fully illuminated workspace, there is, among others, a tilting rotary table, a 30-position tool magazine and a reliable spindle with an optimum speed range. In turn, the linear axes (X,Y,Z) use a direct measuring system in the form of measuring scales to achieve the best accuracy and repeatability. All this is complemented by a touchscreen operator panel with intuitive SIEMENS CNC control. All these technical solutions, combined with the extensive range of equipment, guarantee uninte ...

DMG MORI SEIKI DMC 635 V Ecoline CNC machining center was built in 2013. The machine, designed for precision machining of workpieces, is distinguished by its extremely stable construction made of high-quality cast iron, which perfectly dampens any vibrations and oscillations. To achieve the highest precision and accuracy, reliable components in the form of cutting tools and a high-speed spindle are used in the machining process. Tools are changed in a very short time, so that the overall milling time is significantly reduced. The DMG DMC 635 V ECO CNC vertical machining center is offered with a modern touchscreen control panel and integrated chip conveyor. To this date, the machine has only worked for 9069 hours. The DMC 635 V ECOLINE milling center weighs 3900 kg. Technical specifications of the CNC milling machine DMC 635 V ECO - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z ax ...

DOOSAN DNM 4500 CNC machining center was built in 2022 (purchased as new in 2023) in South Korea by DN SOLUTIONS. The machine, designed for precision machining of workpieces with a maximum weight of 600 kg, is equipped with a number of reliable components that ensure uninterrupted operation for many years of intensive production. The machining processes, i.e. drilling, threading and milling, are performed inside a large work area by means of cutting tools and a powerful spindle with direct drive. All this is complemented by the intelligent SIEMENS CNC controller, in which advanced machining programmes are created in just a few steps. Throughout its entire service life, the machine has worked for just 83 hours. The DOOSAN milling center weighs 5000 kg. Technical specifications of the DOOSAN DNM 4500 CNC milling machine - CNC controller: SIEMENS SINUMERIK 828D - feed in the X/Y/Z axis ...

CNC controller: Siemenes SINUMERIK 840 Axes X-axis travel mm: 2.000 Y-axis travel mm: 1.600 Z-axis travel mm: 1.800 W-axis travel mm: 600 Rapid traverse m/min: x,y = 15; z = 17 ; w = 6 B-axis degrees: 360º U-axis travel mm: 90 Worktable Number of pallets: 3 Table dimensions mm: 1.250 x 1.600 Max. workpiece weight kg: 10.000 Maximum workpiece size (W x L x H ) mm: 1.500 x 1.700 x 2.300 Spindle Spindle speed rpm: 12 - 3.500 Spindle drive power kW: 45 Tool system Tool holder: CAPTO C8 Tool magazine slots: 133 Max. Tool Length mm: 700-500-100 Max tool weight kg: 25 Equipment Chip conveyor Tool breakage probe Oil cooling Unit Basic machine dimensions / weight Length mm: 13.500 Width mm: 13.500 Height mm: 4.500 Weight kg: 63.550

DUGARD EAGLE 1000 VMC CNC vertical machining center was built in 2000 in Taiwan by C Dugard Ltd. The machine is used for precision machining of workpieces with a maximum weight of 600 kg. The machining process is performed by means of reliable components that offer the highest quality of manufactured parts for many years of use. Inside the large workspace there is among others a large work table with a length of 1200 mm and a width of 450 mm, a powerful spindle and a 20-position tool magazine. The DUGARD EAGLE 1000 CNC machining center weighs 5800 kg. Technical specifications of the DUGARD EAGLE 1000 VMC CNC milling machine - CNC control: SIEMENS - feed in the X/Y/Z axis: 1020/510/510 mm - feed rate in the X,Y,Z axis: 1-7600 mm/min - rapid traverse in the X/Y/Z axis: 30/30/18 m/min - work table dimensions (L x W): 1200 x 450 mm - maximum workpiece weight: 600 kg - maximum spind ...

ELUMATEC SBZ 618 machining center was built in 2014 in Germany by Elumatec AG. The machine enables fully automatic machining of profiles made of steel, aluminium and PVC. Its excellent machining parameters and high precision make it an excellent choice for businesses associated with e.g. window or door manufacturing. The profiles are cut by a reliable saw with a 550 mm diameter and with an angle adjustment range of -22.5° to +22.5°. The machining unit is also equipped with a reliable spindle for milling and hole-making. The ELUMATEC profile machining center is offered with a wide range of equipment, including a magazine capable of accommodating 10 profiles as well as a barcode scanner and label printer. The total weight of the machine is approximately 5500 kg. Technical specifications of the ELUMATEC SBZ 618 profile drilling and cutting center - maximum workpiece length: 4000 mm - ...

FADAL VMC 2016L CNC machining center was built in 1997 in the United States. The machine, designed for precision machining of workpieces, has a large, fully illuminated work area, with automatic tool changer (ATC) and a reliable spindle. Excellent dynamics and feed repeatability are ensured by precision guideways along which the X,Y,Z axes are guided. All this is complemented by the intuitive CNC control where machining programmes are created in just a few steps. All this makes the VMC 2016L CNC vertical machining center the perfect solution for any production facility. Technical specifications of the FADAL VMC 2016L CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 500/400/700 mm - work table dimensions (L x W): 750 x 410 mm - number of T-slots: 3 - maximum spindle rotational speed: 7500 rpm - automatic tool changer (ATC) - maximum tool diameter: 7 ...

FADAL VMC 3016 CNC machining center, built in 1994 in the United States is used for precision machining of workpieces with a maximum weight of 453 kg. The machine, distinguished by its extensive machining capabilities and high productivity, has a large, fully illuminated workspace with a powerful spindle and a 21-position tool magazine. The movement of the X, Y and Z axes along precise guideways results in excellent dynamic and repeatable feed rates. This is completed by an intuitive CNC control with many useful functions, in which machining programmes are created in just a few steps. The VMC 3016 CNC vertical machining center weights 3765 kg. Technical specifications of the FADAL VMC 3016 CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 760/400/500 mm - rapid traverse in the X,Y axis: 18 m/min - rapid traverse in Z axis: 15 m/min - cutting speed in  ...

WE OFFER AN NICE WORKING CONDITION 5 AXIS SIMULTANIUS ROBODRIL WITH COMPLETE TOOLS AND ACCESSORIESS AN NICE OPORTUNETEY . MACHINE IS IN THE PRODUCTION WRKING DAILY ORDERS WITH MACHINE COMES 21X TOOLHOLDERS 1X RENISHAW 1X TOOL TOUCH MEASURING 4-5 axis rotary Machine type: 5AXIS MILLING -SIMULTANIUS Manufacturer: ROBODRILL-FANUC Model: ALPHA-D21L iB5ADV Year of construction:2021 Condition: EXCELLENT (used) Functionality: fully functional Operating hours:4,495 h ON DATE : 20.02.2025 TECHNICAL DETAILS Travel distance X-axis: 700 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 400 mm SPINDLE SPEED: 24.000RPM

FEELER VMP 32 CNC vertical machining center was built in 2012 in Taiwan. This versatile machine with extensive machining capabilities is specially designed for precision machining of heavy workpieces weighing up to 800 kg. To achieve excellent precision and accuracy in machining process, reliable components in the form of the spindle and cutting tools taken from the 22-position tool magazine are utilised. In addition, movement of the X,Y,Z axes is performed on ground rolling guideways, resulting in excellent dynamics and feed repeatability. All machining parameters are programmed in an intuitive CNC control from the renowned company FANUC. The FEELER milling center weighs 5800 kg. Technical data of the FEELER VMP 32 CNC milling machine - CNC controller: FANUC Series 0i-MD - feed in the X/Y/Z axis: 820/520/505 mm - rapid traverse in the X/Y/Z axis: 40/40/30 m/min - work table surfa ...

Table length: 1230 mmTable width: 410 mmLongitudinal X: 700 mmCross Y: 315 mmVertical Z: 540 mmCNC Brand: HeidenhainCNC Model: TNC 426 Make Fehlmann 82Type82 CNC HF Year 1998 Heidenhain TNC 426 Table length (mm) X = 700 Table width (mm) Y = 315 Longitudinal  X (mm) Z = 540 Cross Y (mm) Hsk 50 / 30.000 Vertical Z (mm) Table 1230 x 410 Rapid = 15.000 mm Large tooling 4e axis with tilting !  

FEHLMANN PICOMAX 60-M CNC vertical machining center was built in 2006 in Switzerland by FEHLMANN AG. The machine is designed for even the most intensive machining of workpieces with a maximum weight of 300 kg. The machining process is performed inside a large workspace, equipped with, among others, a reliable high-speed spindle and a 24-position tool magazine. Daily work, on the other hand, is facilitated by the installed HEIDENHAIN CNC control, in which advanced machining programmes are created in just a few steps. The PICOMAX 60 M CNC machining center will satisfy even the most demanding customers thanks to its excellent performance and high machining precision. The total weight of the machine is 3350 kg. Technical specifications of the FEHLMANN PICOMAX 60-M CNC milling machine - CNC controller: HEIDENHAIN iTNC 530 - feed in the X/Y/Z axis: 505/355/610 mm - feed rate in the X,Y,Z ...

with max. print repeat 1350 mm 8 + 2 colors Ink system: solvent based Printing width max. 1.250 mm Material width min. 600 mm max. 1.300 mm Print repeat min. 400 mm max. 1.350 mm . Winding System automatic sequence („flying splice) Unwindinq Reel diameter : max. 1.000 mm Core inside diameter Rewindinq 76 mm/152 mm Reel diameter max. 1.000 mm Core inside diameter 76 mm/152 mm Web tension range min. 20 max. 500 Mechanical speed max. 460 m/min. Drying system Gas Materials to be printed all plastic films like PE, PP, OPP and others as well as film laminations in a thickness range of approx. 10-120 microns (depending on substrate), paper/laminati ...

FOREST LINE Majormill Year: 2011 DESCRIPTION: 5 axis SPECIFICATIONS: X 532 (13500mm) Y 157 (4000mm) Z 59 (1500mm) # AXIS 5 POWER 53 hp RPM 6,000 RPM # ATC 120 TAPER 50 Forest-Line / Five Lines Majormill 350ta 2t Cnc Gantry Mill (2011) Work Area: 2 Cast Iron Table – Table Dimensions: 6000 Mm X 2750 Mm (236.22” X 108.27”) – Maximum Load: 20 Tons (30 Tons Coupled Tables) Distance Between Uprights: 3500 Mm (137.80”) Distance Under Milling Spindle: 2600 Mm (102.36”) Distance Between Table And Under Crossrail: 3000 Mm (118.11”) Tool Capacity: 120 Tool Taper: Iso 50 Strokes: -- X-Axis (Double Table): 13300 Mm (523.62”) – X-Axis (Single Table): 6500 Mm (255.91”) – Y-Axis: 4000 Mm (157.48”) – Z-Axis: 1500 Mm (59.06”) – W-Axis: 1500 Mm (250 Mm Pitch X 6) [59.06” (9.84” Pitch X 6)] – C-Axis: N X 360 Deg. � ...

Table length: 1200 mmTable width: 1000 mmLongitudinal X: 1750 mmCross Y: 1400 mmVertical Z: 600 mmPositions ATC: 30  Distance between uprights: 1 mmCNC Brand: Heidenhain Portal milling machineFPT - STINGER MACH-ID 8829 Make: FPT Type: STINGER Control: HeidenHain iTNC530 Year: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant X - Travel1750 mm Y - Travel1400 mm Z - Travel600 mm Table Length1200 mm Table Width1000 mm Table load5000 Feed rate X-Axis35000 mm/min. Feed rate Y-Axis35000 mm/min. Feed rate Z-Axis35000 mm/min. Spindle TaperHSK 63 ISO/Bt/Mk Power on spindle25 kW Speeds / ranges18000 Rpm ATC / revolver30 Coolant through spindle / Bar20 Number of controlled axis5

HAAS EC-1600ZT CNC machining center was built in 2020 in the United States by the renowned brand HAAS AUTOMATION INC. Designed for machining of heavy workpieces weighing up to 4536 kg, the machine is the ideal combination of functionality, productivity and precision. In order to meet this challenge, the machine is equipped with a wide range of equipment such as a rotary table (4th axis), a two-stage spindle and a capacious magazine with automatic tool changer. The HAAS EC 1600ZT CNC horizontal machining center has only been in operation for 3 minutes so far. The total weight of the machine is approximately 13472 kg. Technical specifications of the HAAS EC-1600ZT milling center - feed in the X/Y/Z axis: 1626/1270/1016 mm - feed in the B axis: 360° - rapid traverse in the X,Y,Z axis: 15.2 m/min - work table surface (L x W): 1626 x 914 mm - clamping plate diameter (rotary table): 7 ...

HAAS UMC-750SS CNC vertical machining center built in 2018 in the United States is used for precision machining of complex workpieces with a maximum weight of 300 kg. The machine features a large work area which includes a direct-drive spindle, a 500 mm diameter rotary tilting table with a precision pilot hole and a measuring probe from the renowned RENISHAW brand. In addition, each tool taken from the 40-position magazine is continuously measured to ensure continuity of the machining process. The UMC-750SS CNC machining center is offered with extensive equipment, which includes e.g. a belt chip conveyor and a perfectly optimised HAAS NGC CNC controller with many useful functions. To this date, the machine has run a small amount of time and has been used for prototyping, tooling production and small batch machining. The HAAS UMC 750 SS milling center weighs 8200 kg. Technical speci ...

HAAS VF-1 CNC machining center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, designed for unit and small batch production, is the ideal choice for any tool workshop. All this is due to the use of a number of modern components with excellent technical parameters, which guarantee high reliability and precise machining. Workpieces weighing a maximum of 1361 kg are machined inside a large, fully illuminated work area by means of a high-speed spindle and tools taken from a 20-position magazine. The machining process is free of vibration or oscillation, thanks to an extremely stable design made from top-quality steel. All this is complemented by an intelligent CNC control with an intuitive interface. The HAAS VF1 milling center weighs 3539 kg. It is also possible to purchase additional tooling shown in the photos (tool holders, vices, TSCHORN 3D tester, measur ...

HAAS VF-4 CNC vertical machining center built in 2022 in the USA, is the perfect choice for any manufacturing facility. The machine, which combines functionality, productivity and precision, achieves excellent machining results under even the heaviest loads. This is all due to its extremely stable construction with a large work area, which includes a high-speed spindle, a rotary table and a set of probes for tool measurement and workpiece setting. In addition, in order to fully utilise the machine’s potential and machining capabilities, the installed HAAS CNC controller has been retrofitted with a faster processor and many additional functions. The offered HAAS VF 4 CNC machining center has worked a small amount of time so far and is in perfect condition. The total weight of the machine is 6033 kg. Technical specifications of the HAAS VF-4 CNC milling machine - feeds in the X/Y/ ...

Stock number: 3951 PROCESSING Manufacturer: Haas, Type: VF-6B/40HE Machines NO.: 29222, Year of manufacture: 2002 Specifications: Table size 1626x711 mm Longitudinal movement (X) 1650 mm Transverse movement (Y) 800 mm Vertical movement (Z) 762 mm Spindle cone ISO 40 Spindle speeds 10000 rpm Controlled in axes 3 Operating hours spindle 17652 hours Accessories: Cooling by spindle Chip conveyance. Tool Measuring Length: 4000mm, Height: 3150mm, Width: 3000mm, Weight: 9800 kg

Control System: Fanuc OI-MC Table Working Surface: 29.5 x 20 Table Load Capacity: 1540 LBS Longitudinal Travel (X-Axis): 23.62 Cross Travel (Y-Axis): 20.08 Vertical Travel (Z-Axis): 20.08 Maximum Clearance Table Top to Spindle Nose: 26.1 Rapid Traverse Rate, All Axes: 1181 IPM Tool Storage Capacity: 24 Spindle Horsepower: 17.3 HP Spindle Speeds Range: 0-8000 RPM Spindle Taper: No. 40 CAT (V-Flange) Approximate Machine Dimensions: 118 x 96 Approximate Machine Height: 103 Approximate Machine Weight: 8,500 LBS

HARDINGE BRIDGEPORT DT 480 P3 Stock number 8075228 X-axis travel 18.90 Y-axis travel 15.75 Z-axis travel 16.93 Spindle speed 10,000 RPM Spindle taper BT 30 Tool magazine capacity 20 ATC Control Fanuc Additional axis 4th Axis Ready Coolant Standard Coolant System

WE OFFER TWO HERMLE MACHINES COMPLETE SAME CONFIGURATION Both machines Year 2007 and same fully Equipment inside ! First Machine new Spindle 10/2023 Second Machine new Spindle 04/2024 INCLUDED COMPLETE TOOLINGS 30 TOOL HOLDERS EACH MACHINE The machines have been continuously serviced by Hermle and are in a ready-to-use condition. Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 450 mm Controller manufacturer: Heidenhain Controller model: iTNC530 Operating hours of spindle: 21,000 h Coolant supply: 80 bar Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable Travel paths: X: 600mm Y: 450mm Z: 450mm C: 360 degrees A: +/-115 degrees Equipment: Control: Heidenhain iTNC 530 Spindle speed: 18000 rpm Spindle mo ...

Less than 100 hours on machine. Machine has been stored in heated building. Boasting a 24-inch Z-axis travel bed and a 42-inch X-axis travel bed, 24-inc Z verticle travel. Equipped with 12,000 RPM, CAT 40 spindle taper and a powerful 24 hp spindle horsepower. 30 station automatic tool changer. Wired for 220 V power source. Magnet shown in video not included in sale of machine. Renishaw tool and part probe. Software options shown on pictures attached.

InfoTEC 2515 Energy CNC router was built in 2017 in Poland by 4CNC Sp. z o.o. The machine is designed for the production of precise, repeatable parts made of a wide range of materials, i.e. wood, plastics and light metals. Its versatility and cost-effectiveness make it an excellent choice for companies with diversified production profiles. Materials are machined on a large work table using a brushless HSD spindle with automatic tool changing (ATC) system. This system allows the use of several tools in a single machining cycle, significantly saving the time required for changeover of the workhead. What’s more, the innovative control system has been integrated with powerful digital AC servo motors to achieve excellent dynamics and feed repeatability. The InfoTEC 2515E CNC milling machine weighs approximately 2200 kg. Technical specifications of the InfoTEC 2515 Energy milling machi ...

InfoTEC 6205 PRO 5 AXIS profile machining center was built in 2019 in Poland by 4CNC Sp. z o.o. The machine, designed for precision milling, drilling and cutting of workpieces made from a wide range of materials, is an excellent choice for companies with a diverse production profile. Workpieces are machined using a moveable machining station, which moves over an extended work area. This solution significantly increases production efficiency, thanks to the possibility of machining more than one workpiece at the same time. The InfoTEC PRO-X 5 AXIS aluminium profile machining center is offered with a wide range of equipment, including e.g. an advanced CNC controller, programs that facilitate daily machine operation and PANASONIC light curtains. The total weight of the machine is approximately 5800 kg. Technical specifications of the InfoTEC 6205 PRO 5 AXIS beam drill line - number of ax ...

Ingersoll MasterHead 5-Axis CNC Planer Mill Model : MasterHead Age : 2016 SERIAL NO.: 28806 (27-01) FEATURES: FANUC 31I 5-AXIS NEW 2016 DOUBLE HOUSING ADJUSTABLE RAIL AUTOMATIC TOOL CHANGER AUTOMATIC ATTACHMENT CHANGER 2-AXIS MILLING HEAD ATTACHMENT 5-SPINDLE UNITS TRAVELS: X-AXIS, TABLE TRAVEL 541.1 (13750mm) Y-AXIS, HORIZONTAL HEAD TRAVEL 196.85 (5000mm) Z-AXIS, RAM STROKE 39.37 (1000mm) W-AXIS, VERTICAL TRAVEL OF CROSS RAIL 98.42 (2500mm) A-AXIS, HEAD ROTATION, 360 DEGREE 360,000 POSITIONS B-AXIS, HEAD SWIVEL, 180 DEGREE 360,000 POSITIONS SPECIFICATIONS: TABLE SIZE, JOINED 137.79 X 509.4 (3500 x 12940mm) TABLE SIZE, UN-COUPLED FRONT 137.79 X 255.5 TABLE SIZE, UN-COUPLED BACK 137.79 X 253.9 DISTANCE BETWEEN TABLE SECTIONS 39.37 DISTANCE BETWEEN COLUMNS 147 RAM CROSS SECTION 23.62 X 23.62 MAXIMUM HEIGHT TABLE TO RAM FACE 127.95 SPINDLE TAPER  ...

JAFO FWF 32 universal milling machine was manufactured in 1989 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine, distinguished by its high functionality, versatility and reliability, is used for precision machining of workpieces. The stable design made of high-quality cast iron has, among others, an pull-out beam and a table with a large working area. The vertical torsion spindle used can work with a wide range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32 vertical milling machine weighs 2280 kg. Technical data of the JAFO FWF 32 milling machine - work table surface (L x W): 1300 x 320 mm - distance between spindle end and work table: 430 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam - arm for removing vertical spindle - installed power: 7,1 kW - power supply: 3 ...

JAFO FWF 32J universal milling machine was produced in 1990 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine designed for precision machining of workpieces is characterised by high functionality, versatility and reliability. The machine body, built from high quality cast iron, is equipped with, among others, a pull-out beam with its own drive and a table with a large working area. The reliable vertical torsion spindle works with a range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32J vertical milling machine weighs 2800 kg. Technical data of the JAFO FWF 32J milling machine - feed in the X/Y/Z axis: 900/300/450 mm - work table surface (L x W): 1250 x 315 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam with drive - workplace illumination - installed power: 12,5 kW - ...

KITAMURA MYCENTER HX630G CNC machining center was built in 2017 by the Japanese brand Kitamura Machinery Co., Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 1500 kg, was created as a response to the needs of modern business. In order to meet all production requirements, state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The machining process is performed fully automatically inside a large working area, which includes a capacious tool magazine and a reliable spindle with a special DCS (Dual Contact Spindle) system. This system ensures optimum spindle rigidity through simultaneous contact between the taper and the flange. Furthermore, the automatic pallet exchange system allows workpieces to be loaded and unloaded simultaneo ...

Guillotine for slicing frozen meat with a capacity of 8000 kg. per hour It can cut molds of frozen meat with a temperature of -15°C to -3°C without defrosting the product during processing. The processed product is unloaded directly into Laska type carts. Technical parameters: Models IB – 4 IB – 8 Productivity- kg / hour up to 4000 up to 8000 Capacity kW 15 15 Max. weight of pieces gr. 200 450 Min. block temperature: -18 °C -15 °C Block dimensions mm. 600 / 400 /200 Machine dimensions: length 1400 width 1130 height 1680 Weight of the machine kg. 720

-The machine is fully automated as a working process. Automatic filling with lifting device for standard carts type Laska 200 liters. The entire receiving hopper is automatically tilted by means of hydraulics and the mixture is unloaded in seconds. -With the help of the 2 Z-shaped augers, the highest quality and gentle mixing is carried out, especially important for achieving the structure of the minced meat! The machine is optionally equipped with a vacuum and a vacuum pump! Completely factory refurbished with delivery installation samples and training and 1 year warranty.

PROOFER WITH LILLNORD PG 100 CLIMATOR proofer for 4 carts; climate control Lillnord PG-1000; used in working condition.

LUNA MM 3000 V milling machine was built in 2010 in Sweden. This extremely powerful machine designed for precision machining of workpieces has a structure and column made of high-quality cast iron, which maintains high rigidity and stability during milling. During the machining process, a high-speed spindle with three feed rates and two speed ranges is used. The spindle rotational speed is controlled by a pulley mounted on a bronze plain bearing. The movable upper arm with milling head additionally provides full flexibility in machining the workpiece and manipulating the tool. The LUNA MM 3000V universal milling machine weighs 1300 kg. Technical specifications of the LUNA MM 3000 V vertical milling machine - work table dimensions (L x W): 1270 x 254 mm - maximum work table load: 300 kg - longitudinal feed (X axis): 790 mm - vertical feed (Y axis): 406 mm - lateral feed (Z axis):  ...

MATEC 30 HV CNC machining center was built in 2001 in Germany by Matec Maschinenbau GmbH. The machine, designed for precision machining of oversized workpieces, is equipped with a number of reliable components with excellent specifications. This includes a tilting work head, a 24-position tool magazine and a chip extraction unit. All this is complemented by the intelligent BOSCH CNC control, in which advanced machining programmes are created in just a few steps. The MATEC CNC vertical machining center weighs approximately 15000 kg. Technical specifications of the MATEC 30 HV CNC milling machine - CNC controller: BOSCH TYP 3 OSA - feed in the X/Y/Z axis: 3000/600/800 mm - maximum spindle rotational speed: 9000 rpm - minimum spindle rotational speed: 20 rpm - spindle drive power: 16 kW - tilting work head - rotation angle of work head: ± 90° every 1° - 24-position tool magazi ...

2005 Milltronics VKM3 CNC Milling Machine, very clean. Flood & Mist Cooling. New Kurt vise. Includes tooling shown in pictures.