scissor lifts used for sale

Self-propelled scissor lift, PB Lifttechnik GmbH, working height 14m, 320kg lifting capacity - used - : Price (net) from location: only 9.500.-€! Manufacturer: PB Lifttechnik GmbH Type: PB S140-12EL Year of Make: 2022 Serial Number: PBL21204.94 Working height: 14m Platform height: 12m Lifting capacity: 320kg Movable at full height: yes Platform size: 2.26m x 1.15m Max. platform size: 3.16m x 1.15m Total length: 2.49m Total width: 1.18m Total height: 2.63m Transport height: 2.02m Turning radius outside: 2.40m Center ground clearance: 10cm Speed: (on/off): 3.9/0.88km/h Climbing ability: 25% Ab. Angle of inclination (length / transverse axis): 3 degrees / 1.5 degrees Motor power: 3.3kW, 24V Battery capacity: 300Ah Net weight: 3,300kg Max. Load Capacity: 320/113kg Max. permissible hand force: 400N Only for indoors! Ab. Operating pressure: 210 bar Control vol ...

VW/Audi VAS 6131 Scissor Lift Table Especially for installation/removal and repair of engine and transmission. + Scissor lift table for all vehicle models + Ideal for installing and removing vehicle components + High stability + Flexible range of use Product With the VAS 6131 scissor lift table, motors and gearboxes of the modern generation of units can be quickly installed and removed without the need for an additional ats unit. These powertrains weigh up to 800 kg, which is why the conventional motor and transmission jack cannot be used here. Ease of use and easy maneuverability set standards and make the product indispensable. Product benefits - Maximum flexibility: The pick-up platform, which consists of an engine and a movable transmission plate, can be tilted three-dimensionally by 60 mm in order to reach all powertrain pick-up points perfectly in all installation  ...

Flat Scissors Lift Table Jungheinrich Ant Euro Pallet SLT Electric Hydraulic Top condition, full function. Safety shutdown works. Function see video Total weight approx. 235 kg. Of which the control unit weighs approx. 20 kg. Power connection 380 volts, 16 A. Lifting time approx. 18 seconds. Max. lifting weight 1000kg From the dissolution of the company. Was treated with care Within a radius of 200 km, a delivery before the purchase can be considered to give reimbursement of expenses. The eventual delivery is made on Euro pallets, unloaded with a lifting platform. No need for a forklift on site.

Lift table, electro-hydraulic - stationary 850 x 1300 mm Version: Single scissors Load capacity: 2000 kg Stroke: 1050 mm Platform height min./max.: 250 - 1300 mm Platform dimensions: 850 x 2000 mm Basic dimensions: 785 x 1630 mm Lifting speed: 20 - 25 sec. Lifting motor: 380 V / 50 Hz, 1.5 kW Weight: 300 kg

Working Platform Scissor Lift Defective UPRIGHT Type: SL20 Load capacity 295 kg Transport dimensions approx. 2.565 x 0.84 x 2.01 m Weight approx. 1423 Kg Working height approx. 8.1 m Platform height approx. 6.1 m defect. Machine has been standing around with me for a long time. Unfortunately, I didn't get around to repairing them again and again. The cable would have to be renewed and the electrics checked. no batteries included. (Could possibly be bought by me.) further damage cannot be ruled out. Documents such as circuit diagrams, etc. are available. There are other technically defective working platforms. Haulotte H12 SX Haulotte H15SX Skyjack SJLB12 Upright SL26SL TEREX TA40 JLG2030 DENKA DL25 PB DAVID DENKA DK3MK9 UPRIGHT TM12 Please check my other articles, or inquire. Maybe someone has more time  ...

scissor lift; Working platform lifting platform: Lifting platform HERED LIFT Type: HS1012H Load capacity: 320 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.22 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.50 m x 1.18 m Height: 2.49 m Railing folded down Height: 1.94 m Weight approx.: 2810 Kg Working height: 12 m Platform height: 10 m Climbing ability up to: 25° Battery-powered 24 V / 200 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires Other sizes with wheel and crawler drive available. For further dates or offers or availability, please inquire. Due to EU requirements, the offer is aimed exclusively at tradespeople. Depending on availability, the machine can be viewed and test driven at our warehouse. Su ...

Scissor lift off-road - work platform with crawler chassis and automatic support. HERED LIFT Type: HC0610E Payload: 230 kg Lifting capacity platform extension: 113 kg Platform dimensions: 0.7m x 1.65m Extendable platform + 0.90 m Transport dimensions 2.35 m x 1.24 m Track width: 1.07 m Height: 2.26 m Railing folded down Height: 1.93 m Weight approx.: 1900 Kg Working height: 7.8 m Platform height: 5.8 m Automatic levelling support Steel chains with non-marking plastic pads. Climbing ability up to: 40° Overload Shutdown: Battery-powered 24 V / 260 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty For further dates, delivery time and availability, please enquire. Depending on availability, the machine can be viewed and test driven at our warehouse. Subject to p ...

JLG Electric Scissor Lift electro-hydraulic Model: 2646 ES Platform load capacity: 450 kg Lifting capacity of extendable part: 120 kg Net weight: 2787.32 kg Number of people allowed on work platform: 2 Permissible number of persons extendable part: 1 Overall height in the basic position of the working platform: 2.33 m Overall height with max. extended working platform: 9.02 m

Offer 24135 Specifications: - Load capacity 600 kg - Platform dimensions with cut-out approx. 1300 x 950 mm - Drive-in cut-out for pallet trucks - min. lift table height approx. 80 mm - Max. lift table height approx. 900 mm - Stroke 820 mm - Operation via sep. Control panel - Hydr. drive 400 V / 0.55 kW - Space requirement approx. W 1300 x D 950 mm - Weight approx. 200 kg

SPECIFICATIONS: Hydraulic lift Height adjustable: up to 1,250 mm Dimensions mm: 2500 x 750 Load capacity: Kg 1000 Complete with safety device

JLG Elektro - Scissor Lift Model 2646 ES Electric, hydraulic Platform load capacity: 450 kg Load capacity extendable part: 120 kg Weight: 2787.32 kg Permitted number of persons: 2 (extendable part 1) Overall height in basic position: 2.33 m Overall height with max. extended working platform: 9.02 m

wheel alignment scissor lift 5t, galvanized, Specifications: Stroke underfloor 1,800mm, stroke above-ground 2,160 mm Overall length 5,200 mm, overall width 2,300 mm, ramp height 360 mm, platform length 5,200 mm, Platform width 729 mm, motor power 3 kW, electrical connection 230/400V, 50 Hz, compressed air connection 6-8 bar, Lifting time 45 sec., lowering time 45 sec. Characteristics: Electro-hydraulic drive,2 maintenance-free hydraulic cylinders, No mechanical connections between the rails,Maintenance-free roller lafers, HD unit integrated in the control panel, operation via push buttons with integrated storage option, Integrated hand pump and emergency lowering in case of power failure, Hydraulic synchronization system with automatic level compensation (master-slave system)Pneumatic set-down device with automatic pressure system. Unlocking, non-contact inductive proximity swit ...

Max. load: 5000 kg Min. height: 525 mm Max. height: 885 mm Platform size: 2000 x 2500 mm Featured with: - Handheld controller Country of origin: Germany Motor power: 4 kW Machine LxWxH: 2000 x 2500 x 525 mm Machine weight: 1600 kg

scissor lift; Off-road platform with crawler chassis Type: CFPT0608LDN Load capacity: 230 kg Load capacity platform extension: 113 kg Platform dimensions: 1.86 x 0.81 m Platform extendable + 0.90 m Transport Dimensions: 2.06 m x 0.99 m Height: 2,17m Railing folded down height: 1.8 m Weight approx.: 1710 Kg Working height: 8 m Platform height: 6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 300 Ah integrated charger 24 V/ 30 A German instruction manual included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform is easy to load and transport, can be easily transported with car trailer with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing  ...

Off-road scissor lift - work platform with crawler chassis and automatic support. Type: CFPT 0810LDS Load capacity: 450 kg Load capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport Dimensions: 2.78 m x 1.58 m Height: 2.40 m Railing folded down height: 1.86 m Weight approx.: 2950 Kg Working height: 10 m Platform height: 8 m automatic levelling support Climbing ability up to: 30° Overload cut-off: Powered by battery 48 V / 210 Ah integrated charger 48 V/ 25 A German instruction manual included 2 years manufacturer's warranty This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing is carried out by .DLL Leasing. Further terms and details on request. The machine is also available with 8 / 12 / and 14m working  ...

Off-road scissor lift - working platform with crawler chassis. FRONTEQ Type: FS0507T Load capacity: 200 kg Platform dimensions: 125 x 0.7 m Platform extendable + 0.6 m Transport Dimensions: 1.32 m x 1.0.8 m Height: 2.07 m Railing folded down height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German instruction manual included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with a car trailer or in a Sprinter or so with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a te ...

Off-road scissor lift - work platform with crawler chassis and automatic support. FRONTEQ Type: FS0610TL Load capacity: 230 kg Load capacity platform extension: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extendable + 0.89 m Transport Dimensions: 2.27 m x 0.96 m Height: 2.14 m Railing folded down height: 1.67 m Weight approx.: 1780 Kg Working height: 8 m Platform height: 6 m automatic levelling support Supports can be folded in bright non-marking chains. Climbing ability up to: 30° Overload cut-off: Powered by battery 24 V / 2x 85 Ah integrated charger 24 V/ 36 A German instruction manual included 2 years manufacturer's warranty This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing is carried out by .DLL Leasing. Further terms and conditions o ...

Scissor lift terrain - working platform with crawler chassis and automatic support. FRONTEQ Type: FS0610TL Payload: 230 kg Load capacity platform pull-out: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extendable + 0.89 m Transport dimensions 2.27 m x 0.96 m Height: 2.14 m Railings folded down Height: 1.67 m Weight approx.: 1780 Kg Working height: 8 m Platform height: 6 m automatic levelling support Retractable supports bright non-marking chains. Gradeability up to: 30° Overload shutdown: Drive via battery 24 V / 2x 85 Ah integrated charger 24 V/ 36 A German operating instructions included 2 years manufacturer's warranty The machine is also available without support. For further dates, delivery time and availability please inquire. Depending on availability, the machine can be inspected at our warehouse ...

Scissor lift terrain - working platform with crawler chassis. FRONTEQ Type: FS0507T Payload: 200 kg Platform dimensions: 125 x 0.7m Platform extendable + 0.6 m Transport dimensions 1.32 m x 1.0.8 m Height: 2.07 m Handrails folded down Height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German operating instructions included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with appropriate ramps with a car trailer or in a Sprinter or so. Other sizes with wheel and crawler drive available. For further dates or off ...

Scissor lift terrain - working platform with crawler chassis and automatic support. Type: CFPT 0810LDS Payload: 450 kg Load capacity platform pull-out: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport dimensions 2.78 m x 1.58 m Height: 2.40 m Handrails folded down Height: 1.86 m Weight approx.: 2950 Kg Working height: 10 m Platform height: 8 m automatic levelling support Gradeability up to: 30° Overload shutdown: Drive via battery 48 V / 210 Ah integrated charger 48 V/ 25 A German operating instructions included 2 years manufacturer's warranty The machine is also available with 8 / 12 / and 14m working height, with and without support. In addition, the machine is also available with normal black chains. For further data please inquire. The machine can be viewed at our warehouse and te ...