presses: other used for sale

Size: 520 x 850 mmEquipments:vertical pile feeder1 station with 4 bags

Size: 520 x 740 mmEquipments:1 X Inking Unit1 X Numbering Shaft2 Perforating arm2 X Mounting Rings1 cam left and righ

Size: A3Equipments:6 stationsFold delivery bandas isFlex o-tapegood condition

Size: 530 x 740 mmEquipments:Color Yellow 7 piecesInk duct foil 80 piecesexchange partsvarious machine parts for Heidelberg CD 74Blade4x ink rollersColor magenta 20 piecesColor Cyan 6 piecesColor black 6 pieces

Size: 240 x 350 mmEquipments:length 115 cm power consumption 230 V, 50 Hz Height: Variable from 90 - 116 cmmax. pass-trought width 24 cm width 50 cm Compatible with all 36 x 52 printing machines, regardless of the feeder system (stream feeder / single sheet feeder)Short set-up time, efficient use from 1000 envelopesserial no 20391212

Size: 74 cm

Sell 5 pcs functioning MT Marathon CD/DVD/Bluray Inkjet Printer. Printing costs as low as 0.02 Euro per disc, between 6 and 12 times cheaper than competing inkjet printers. Equipped with four 120ml ink tanks, the Marathon Printer is capable of printing on over 2,500 discs (full-size). Based on the IMT RCD/ DVD Printer 2, the Marathon Printer integrates proven robotics technology and holds 260 discs. The Epson print engine is designed around a standard motor, ensuring flawless detail (up to 5760 dpi). The Marathon printer is an environmentally friendly printer as the refill reservoir system eliminates the need to purchase replacement ink cartridges. In addition, the system allows you to visually check the ink level.

Inv. Num. : 8433 Type: F190 CR Producer: Stratasys Generated: Parameters: Scope of delivery: PC with software Filament dryer Washing machine to remove the support material Filament vacuum cleaner Printheads and pads Number of filament spools

Offset printing machine Ryobi 524 HXX, year 2001, 4-color, color control console in good condition, immediately available Bsbr Sowcw H Teb Nwkolh If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to install the machine in

Embossing press Baier GEBA 1/F, installation height 90 mm, printing capacity 800 kg, working size 10cm x 14 cm, year of construction 1973, machine number 73040, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Automatic roll to roll screen varnishing printing machine LTA-5060 Maximum print area: 500 x 600 mm Material thickness: suitable for different thicknesses Printing Material Thickness 0.02-0.5 mm (PET, PVC, ...) Screen frame 800 x 1000 mm Print speed: high-speed printing 0-2500 impression/hour Registration accuracy: accurate registration for high-quality print results The power of oven: three phase 380V 25KW 40A The power of printer:single phase 220V 3KW 15A

A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.

A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.

Print dimensions X/Y: 880mm/1250mm, max. material thickness: 5mm, max. material weight: 3000g/m², max. frame dimensions X/Y: 1350mm/1590mm, max. frame profile height: 50mm, fine register adjustment: +/-16mm. Gripper edge: 4mm, squeegee and flood speed: 1.5m/s, squeegee angle adjustment: 60°/90°, cycle speed: 1050 cycles/h, infeed height: 965mm, outfeed height: 780mm, machine weight: approx. 800kg. On-site inspection is possible.

Laser power: 20W, pulse duration: 3ns/80ns, pulse power: 626kW, pulse energy: 2mJ, frequency: 10kHz/100kHz, wavelength: 1064nm, marking field: 160mm/160mm, line speed: 250m/min, beam exit angle: 0°/90°. Laser head dimensions X/Y/Z: 535mm/190mm/160mm, control unit dimensions X/Y/Z: 650mm/550mm/300mm, weight: approx. 100kg. On-site inspection is possible.

A BST register control system for the printing industry is available. Web speed: 1200m/min, format length: 50mm-6000mm, max. printing units/control points: 20, measuring resolution: +/-5µm, measuring frequency: 30Hz. Measuring methods: Web-path-1, web-path-2, web-cylinder. Control algorithms: Gravure, offset, insetter. Interfaces: SMARTData, Ethernet, Profibus, Profinet. Printing processes: Gravure printing, flexo printing, offset printing, screen printing. Documentation available. On-site inspection is possible.

Print format: 960mm/1260mm, max. print material thickness: 35mm, screen adjustment X/Y: +/-15mm, squeegee speed: 0.2m-1.2m/s, max. print output: 850 pieces/h, machine dimensions X/Y/Z: approx. 2850mm/2200mm/1350mm. Documentation available. On-site inspection is possible.

A screen printing machine ESC (Europa-Siebdruckmaschinen-Zentrum) overhauled in 2004 is available. Print format: 1000mm/1400mm, max. print material thickness: 7mm, max. screen frame dimensions X/Y: 1540mm/1800mm. Documentation available. On-site inspection is possible.

An Eickmeyer flat printing machine with parallel lifting upper frame is available. Printing format X/Y: 500mm/800mm, max. screen frame dimensions X/Y/Z: 1050mm/520mm/30mm, max. workpiece height: approx. 140mm, operating hours: approx. 50h. Documentation available. On-site inspection is possible.

Printing process: Offset printing, printing units: 1, max. paper dimensions X/Y: 360mm/500mm, weight: approx. 560kg. On-site inspection is possible.