used Vertical Milling And Boring Machines for sale

AVIA VMC 1000 CNC machining center was built in 2017 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A.. The machine, distinguished by its extensive machining capabilities and state-of-the-art technical solutions, will meet any, even the most demanding challenges. Workpieces with a maximum weight of 1000 kg are machined by an extremely fast spindle with thermo-stabilisation, which, combined with precision cutting tools, guarantees excellent milling results. On the other hand, the machine’s high-quality construction with sliding doors offers maximum stability in machining by effectively eliminating any vibrations generated during milling. The AVIA CNC vertical machining center is offered with an extensive range of equipment, including toolholders, digital axis servo drives and the intuitive SIEMENS numerical control with ShopMill 3D overlay. The total weight of the machine is 5300 k ...

AVIA X-5 1250/630 CNC vertical machining center was built in 2015 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for, among others, precision milling, drilling and threading of workpieces with complex geometries in 5 axes. All these machining operations are performed by a high-speed electro-spindle located on a tilting working head. The tilting head, in turn, offers the possibility to use shorter tools and select the optimum cutting angle. The AVIA X-5 5-axis CNC machining center is offered with an extensive range of equipment, including a rotary table, measuring probes and a intelligent HEIDENHAIN CNC controller. The total weight of the machine is 10000 kg. Technical specifications of the AVIA X-5 1250/630 CNC milling machine - number of axes: 5 (X,Y,Z,B,C) - feed in the X/Y/Z axis: 1250/700/725 mm - B axis rotation range: -110°/+45° - C axis rota ...

BRIDGEPORT VMC 600/22 Digital CNC machining center was built in 2000 by the English brand Bridgeport Machines Inc. The machine, equipped with among others 4th axis and a 22-position magazine, is used for precision machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a reliable spindle with an optimised speed range, which is driven by a powerful motor. This power allows full utilisation of the cutting tools in any, even the most intensive, production process. All this is complemented by the HEIDENHAIN CNC control, which allows advanced programmes to be created in just a few steps. The BRIDGEPORT CNC vertical machining center weighs 2500 kg. Technical data of the BRIDGEPORT VMC 600/22 Digital CNC milling machine - CNC controller: HEIDENHAIN TNC 426PB - feed in the X/Y/Z axis: 600/410/520 mm - rapid traverse in the X/Y/Z axis: 40/40/20 m/min  ...

CHIRON FZ 18 KL CNC vertical machining center was built in 2000 in Germany by CHIRON Werke GmbH & Co. KG. The machine is used for precise, multi-axis machining of workpieces with complex geometries. For this task, the work space has been equipped with reliable components in the form of, among others, a hydraulically clamped spindle and a 40-position tool magazine. In addition, in order to ensure excellent movement dynamics, all linear axes (X,Y,Z) are driven by a high-performance servomotor with HFUC 50-100 harmonic transmission. The CHIRON FZ 18K L HIGH SPEED CNC machining center is offered with a wide range of equipment, including e.g. a 4th axis that is fully integrated into the numerical control and operated via M-codes. The total weight of the machine is 10000 kg. Technical specifications of the CHIRON FZ 18 KL milling center - feed in the X/Y/Z axis: 2000/520/630 mm - maximum  ...

CINCINNATI ARROW 1250 CNC vertical machining center was built in 2001 in the United Kingdom by CINCINNATI MACHINE U.K. LIMITED. The machine, distinguished by its high reliability, productivity and precision, is used for the economic machining of workpieces. The machining process is performed inside a large work space, equipped with, among others, a 21-position tool magazine and a high-speed spindle. Its high-quality design eliminates any vibrations generated during milling, guaranteeing the highest possible stability during even the most intensive challenges. The offered CINCINNATI ARROW 2 1250 CNC machining center has undergone regular maintenance and servicing. The machine is after an spindle overhaul and the replacement of guides and screws in the X and Y axes. The total weight of the machine is 6000 kg. Technical specifications of the CINCINNATI ARROW 1250 CNC milling machine - C ...

Table length: 1400 mmTable width: 300 mmLongitudinal X: 900 mmCross Y: 350 mmVertical Z: 500 mm Make CME FU 2 MU Type FU 2 Universal Year 1992 Universal horizontal and vertical milling machine Table length (mm)L = 1.400 Table width (mm)W = 300 Longitudinal X (mm)X = 900 Cross Y (mm)Y = 350 Vertical Z (mm)Z = 500 Horizontal & Vertical Feeds in 3 axis Huron type milling head  

DECKEL MAHO DMC 103 V CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine designed for efficient 3-axis machining of workpieces is an excellent choice for any industrial plant. The machining process is performed inside a fully illuminated workspace using reliable cutting tools and a high-speed spindle. The design of the machine perfectly dampens any vibrations and oscillations generated during machining, guaranteeing maximum stability during even the most intense challenges. All of this is complemented by the intuitive SIEMENS CNC control, which allows advanced programmes to be created in just a few steps. The offered DECKEL MAHO CNC vertical machining center has worked 20938 hours to date. Technical specifications of the DECKEL MAHO DMC 103 V CNC milling machine - CNC controller: SIEMENS SINUMERIK 810D - number of axes: 3 - feed in the X/Y/Z axis: 10 ...

DECKEL MAHO DMU 50 EVOLUTION CNC machining centre was manufactured in Germany in 1999. The machine designed for precision machining of workpieces, has a high-quality steel construction, equipped with the best components. The machining process of metals is performed on a 500 mm long and 380 mm wide milling centre work table, using a powerful 15 kW spindle, guaranteeing excellent precision and a significant reduction in milling time. The CNC milling machine has 5 axes (X,Y,Z,C,B) with feeds of 500 mm (X axis), 420 mm (Y axis), 380 mm (Z axis), 180° (C axis) and 360° (B axis). A wide range of equipment is offered with the vertical machining centre, including: a control panel with HEIDENHAIN TNC 430 CNC control installed, a capacious tool magazine and a workpiece probe. The total weight of the machine is 6000 kg. Technical data of the CNC DECKEL MAHO DMU 50 EVOLUTION milling centre  ...

DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...

DMG MORI SEIKI DMC 635 V Ecoline CNC machining center was built in 2013. The machine, designed for precision machining of workpieces, is distinguished by its extremely stable construction made of high-quality cast iron, which perfectly dampens any vibrations and oscillations. To achieve the highest precision and accuracy, reliable components in the form of cutting tools and a high-speed spindle are used in the machining process. Tools are changed in a very short time, so that the overall milling time is significantly reduced. The DMG DMC 635 V ECO CNC vertical machining center is offered with a modern touchscreen control panel and integrated chip conveyor. To this date, the machine has only worked for 9069 hours. The DMC 635 V ECOLINE milling center weighs 3900 kg. Technical specifications of the CNC milling machine DMC 635 V ECO - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z ax ...

DUGARD EAGLE 1000 VMC CNC vertical machining center was built in 2000 in Taiwan by C Dugard Ltd. The machine is used for precision machining of workpieces with a maximum weight of 600 kg. The machining process is performed by means of reliable components that offer the highest quality of manufactured parts for many years of use. Inside the large workspace there is among others a large work table with a length of 1200 mm and a width of 450 mm, a powerful spindle and a 20-position tool magazine. The DUGARD EAGLE 1000 CNC machining center weighs 5800 kg. Technical specifications of the DUGARD EAGLE 1000 VMC CNC milling machine - CNC control: SIEMENS - feed in the X/Y/Z axis: 1020/510/510 mm - feed rate in the X,Y,Z axis: 1-7600 mm/min - rapid traverse in the X/Y/Z axis: 30/30/18 m/min - work table dimensions (L x W): 1200 x 450 mm - maximum workpiece weight: 600 kg - maximum spind ...

FADAL VMC 2016L CNC machining center was built in 1997 in the United States. The machine, designed for precision machining of workpieces, has a large, fully illuminated work area, with automatic tool changer (ATC) and a reliable spindle. Excellent dynamics and feed repeatability are ensured by precision guideways along which the X,Y,Z axes are guided. All this is complemented by the intuitive CNC control where machining programmes are created in just a few steps. All this makes the VMC 2016L CNC vertical machining center the perfect solution for any production facility. Technical specifications of the FADAL VMC 2016L CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 500/400/700 mm - work table dimensions (L x W): 750 x 410 mm - number of T-slots: 3 - maximum spindle rotational speed: 7500 rpm - automatic tool changer (ATC) - maximum tool diameter: 7 ...

FADAL VMC 3016 CNC machining center, built in 1994 in the United States is used for precision machining of workpieces with a maximum weight of 453 kg. The machine, distinguished by its extensive machining capabilities and high productivity, has a large, fully illuminated workspace with a powerful spindle and a 21-position tool magazine. The movement of the X, Y and Z axes along precise guideways results in excellent dynamic and repeatable feed rates. This is completed by an intuitive CNC control with many useful functions, in which machining programmes are created in just a few steps. The VMC 3016 CNC vertical machining center weights 3765 kg. Technical specifications of the FADAL VMC 3016 CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 760/400/500 mm - rapid traverse in the X,Y axis: 18 m/min - rapid traverse in Z axis: 15 m/min - cutting speed in  ...

FEELER VMP 32 CNC vertical machining center was built in 2012 in Taiwan. This versatile machine with extensive machining capabilities is specially designed for precision machining of heavy workpieces weighing up to 800 kg. To achieve excellent precision and accuracy in machining process, reliable components in the form of the spindle and cutting tools taken from the 22-position tool magazine are utilised. In addition, movement of the X,Y,Z axes is performed on ground rolling guideways, resulting in excellent dynamics and feed repeatability. All machining parameters are programmed in an intuitive CNC control from the renowned company FANUC. The FEELER milling center weighs 5800 kg. Technical data of the FEELER VMP 32 CNC milling machine - CNC controller: FANUC Series 0i-MD - feed in the X/Y/Z axis: 820/520/505 mm - rapid traverse in the X/Y/Z axis: 40/40/30 m/min - work table surfa ...

FEHLMANN PICOMAX 60-M CNC vertical machining center was built in 2006 in Switzerland by FEHLMANN AG. The machine is designed for even the most intensive machining of workpieces with a maximum weight of 300 kg. The machining process is performed inside a large workspace, equipped with, among others, a reliable high-speed spindle and a 24-position tool magazine. Daily work, on the other hand, is facilitated by the installed HEIDENHAIN CNC control, in which advanced machining programmes are created in just a few steps. The PICOMAX 60 M CNC machining center will satisfy even the most demanding customers thanks to its excellent performance and high machining precision. The total weight of the machine is 3350 kg. Technical specifications of the FEHLMANN PICOMAX 60-M CNC milling machine - CNC controller: HEIDENHAIN iTNC 530 - feed in the X/Y/Z axis: 505/355/610 mm - feed rate in the X,Y,Z ...

FOREST LINE Majormill Year: 2011 DESCRIPTION: 5 axis SPECIFICATIONS: X 532 (13500mm) Y 157 (4000mm) Z 59 (1500mm) # AXIS 5 POWER 53 hp RPM 6,000 RPM # ATC 120 TAPER 50 Forest-Line / Five Lines Majormill 350ta 2t Cnc Gantry Mill (2011) Work Area: 2 Cast Iron Table – Table Dimensions: 6000 Mm X 2750 Mm (236.22” X 108.27”) – Maximum Load: 20 Tons (30 Tons Coupled Tables) Distance Between Uprights: 3500 Mm (137.80”) Distance Under Milling Spindle: 2600 Mm (102.36”) Distance Between Table And Under Crossrail: 3000 Mm (118.11”) Tool Capacity: 120 Tool Taper: Iso 50 Strokes: -- X-Axis (Double Table): 13300 Mm (523.62”) – X-Axis (Single Table): 6500 Mm (255.91”) – Y-Axis: 4000 Mm (157.48”) – Z-Axis: 1500 Mm (59.06”) – W-Axis: 1500 Mm (250 Mm Pitch X 6) [59.06” (9.84” Pitch X 6)] – C-Axis: N X 360 Deg. � ...

Table length: 1200 mmTable width: 1000 mmLongitudinal X: 1750 mmCross Y: 1400 mmVertical Z: 600 mmPositions ATC: 30  Distance between uprights: 1 mmCNC Brand: Heidenhain Portal milling machineFPT - STINGER MACH-ID 8829 Make: FPT Type: STINGER Control: HeidenHain iTNC530 Year: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant X - Travel1750 mm Y - Travel1400 mm Z - Travel600 mm Table Length1200 mm Table Width1000 mm Table load5000 Feed rate X-Axis35000 mm/min. Feed rate Y-Axis35000 mm/min. Feed rate Z-Axis35000 mm/min. Spindle TaperHSK 63 ISO/Bt/Mk Power on spindle25 kW Speeds / ranges18000 Rpm ATC / revolver30 Coolant through spindle / Bar20 Number of controlled axis5

HAAS UMC-750SS CNC vertical machining center built in 2018 in the United States is used for precision machining of complex workpieces with a maximum weight of 300 kg. The machine features a large work area which includes a direct-drive spindle, a 500 mm diameter rotary tilting table with a precision pilot hole and a measuring probe from the renowned RENISHAW brand. In addition, each tool taken from the 40-position magazine is continuously measured to ensure continuity of the machining process. The UMC-750SS CNC machining center is offered with extensive equipment, which includes e.g. a belt chip conveyor and a perfectly optimised HAAS NGC CNC controller with many useful functions. To this date, the machine has run a small amount of time and has been used for prototyping, tooling production and small batch machining. The HAAS UMC 750 SS milling center weighs 8200 kg. Technical speci ...

This HAAS VF-2 Vertical Machining Center from 1992 is an excellent choice for users looking for a reliable CNC machine. With a spindle horsepower of 30HP and a maximum spindle speed of 7500 RPM, this machine can handle drilling and milling tasks with ease. It comes equipped with CAT 40 spindle taper, Newer CNC control, and electric power source.

HAAS VF-4 CNC vertical machining center built in 2022 in the USA, is the perfect choice for any manufacturing facility. The machine, which combines functionality, productivity and precision, achieves excellent machining results under even the heaviest loads. This is all due to its extremely stable construction with a large work area, which includes a high-speed spindle, a rotary table and a set of probes for tool measurement and workpiece setting. In addition, in order to fully utilise the machine’s potential and machining capabilities, the installed HAAS CNC controller has been retrofitted with a faster processor and many additional functions. The offered HAAS VF 4 CNC machining center has worked a small amount of time so far and is in perfect condition. The total weight of the machine is 6033 kg. Technical specifications of the HAAS VF-4 CNC milling machine - feeds in the X/Y/ ...

Ingersoll MasterHead 5-Axis CNC Planer Mill Model : MasterHead Age : 2016 SERIAL NO.: 28806 (27-01) FEATURES: FANUC 31I 5-AXIS NEW 2016 DOUBLE HOUSING ADJUSTABLE RAIL AUTOMATIC TOOL CHANGER AUTOMATIC ATTACHMENT CHANGER 2-AXIS MILLING HEAD ATTACHMENT 5-SPINDLE UNITS TRAVELS: X-AXIS, TABLE TRAVEL 541.1 (13750mm) Y-AXIS, HORIZONTAL HEAD TRAVEL 196.85 (5000mm) Z-AXIS, RAM STROKE 39.37 (1000mm) W-AXIS, VERTICAL TRAVEL OF CROSS RAIL 98.42 (2500mm) A-AXIS, HEAD ROTATION, 360 DEGREE 360,000 POSITIONS B-AXIS, HEAD SWIVEL, 180 DEGREE 360,000 POSITIONS SPECIFICATIONS: TABLE SIZE, JOINED 137.79 X 509.4 (3500 x 12940mm) TABLE SIZE, UN-COUPLED FRONT 137.79 X 255.5 TABLE SIZE, UN-COUPLED BACK 137.79 X 253.9 DISTANCE BETWEEN TABLE SECTIONS 39.37 DISTANCE BETWEEN COLUMNS 147 RAM CROSS SECTION 23.62 X 23.62 MAXIMUM HEIGHT TABLE TO RAM FACE 127.95 SPINDLE TAPER  ...

JAFO FWF 32 universal milling machine was manufactured in 1989 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine, distinguished by its high functionality, versatility and reliability, is used for precision machining of workpieces. The stable design made of high-quality cast iron has, among others, an pull-out beam and a table with a large working area. The vertical torsion spindle used can work with a wide range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32 vertical milling machine weighs 2280 kg. Technical data of the JAFO FWF 32 milling machine - work table surface (L x W): 1300 x 320 mm - distance between spindle end and work table: 430 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam - arm for removing vertical spindle - installed power: 7,1 kW - power supply: 3 ...

JAFO FWF 32J universal milling machine was produced in 1990 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine designed for precision machining of workpieces is characterised by high functionality, versatility and reliability. The machine body, built from high quality cast iron, is equipped with, among others, a pull-out beam with its own drive and a table with a large working area. The reliable vertical torsion spindle works with a range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32J vertical milling machine weighs 2800 kg. Technical data of the JAFO FWF 32J milling machine - feed in the X/Y/Z axis: 900/300/450 mm - work table surface (L x W): 1250 x 315 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam with drive - workplace illumination - installed power: 12,5 kW - ...

Table length: 1700 mmTable width: 470 mmLongitudinal X: 1400 mmCross Y: 600 mmVertical Z: 590 mmCNC Brand: HeidenhainCNC Model: TNC 410 Make Ki Heung Combi Type Combi U3Z Year 05 / 2000 Ki heung comi milling TNC 410 PA freesmachine Table length (mm)L = 1.700 Table width (mm)W = 470 Longitudinal X (mm)X = 1.400 Cross Y (mm)Y = 600 Vertical Z (mm)Z = 590 Iso 50/2500/11kWCNC TNC 410 PAHR 410 handwheel2 doors front side Universal milling head Full set documentation  

Table length: 2500 mmTable width: 900 mmLongitudinal X: 2100 mmCross Y: 1000 mmVertical Z: 1050 mmPositions ATC: 0  CNC Brand: HeidenhainCNC Model: TNC 410 Merk Ki Heung 1 Type KNC 1000 U Jaar 2004 ki heung knc 1000 u HH TNC 410 PA bedmilling Tafellengte (mm) L = 2500 Tafel breedte (mm) W = 900 Langs X (mm) X = 2.100 Dwars Y (mm)Y = 1.000 Vertikaal Z (mm) Z = 1.050 iso50/4000/22kW Universal huron milling head Double chip conveyor Oil cooler Ridged tapping 8000 Table load  

Table length: 650 mmTable width: 400 mmLongitudinal X: 600 mmCross Y: 400 mmVertical Z: 400 mmPositions ATC: 1  CNC Brand: Heidenhain CNC milling machineKUNZMANN - WF7/3 MACH-ID 9082 Make: KUNZMANN Type: WF7/3 Control: Heidenhain TNC124 Year: 2001 X-Axis:      600mm Y-Axis:      400mm Z-Axis:      400mm Table Length:650mm Table Width: 400mm Table load:  250 Stroke pinole:40mm Length:      2800mm Width:       2400mm Height:      2100mm Weight:      2000kg

Table length: 4200 mmTable width: 1000 mmLongitudinal X: 4000 mmCross Y: 1200 mmVertical Z: 1400 mmPositions ATC: 1  CNC Brand: Heidenhain Bed type milling machineLagun Goratu - GBM 42 MACH-ID 8875 Make: Lagun Goratu Type: GBM 42 Control: HeidenHain iTNC530 Year: 2011 X-Axis4000 mm Y-Axis1200 mm Z-Axis1400 mm Table Length4200 mm Table Width1000 mm Table load10000 Power on spindle28 kW Spindle speeds3000 Rpm Spindle Taper50 ISO/Bt/Mk Feed rate X-Axis10000 mm/min. Feed rate Y-Axis10000 mm/min. Feed rate Z-Axis10000 mm/min. Millinghead auto-index2.5 x 2.5 °

LUNA MM 3000 V milling machine was built in 2010 in Sweden. This extremely powerful machine designed for precision machining of workpieces has a structure and column made of high-quality cast iron, which maintains high rigidity and stability during milling. During the machining process, a high-speed spindle with three feed rates and two speed ranges is used. The spindle rotational speed is controlled by a pulley mounted on a bronze plain bearing. The movable upper arm with milling head additionally provides full flexibility in machining the workpiece and manipulating the tool. The LUNA MM 3000V universal milling machine weighs 1300 kg. Technical specifications of the LUNA MM 3000 V vertical milling machine - work table dimensions (L x W): 1270 x 254 mm - maximum work table load: 300 kg - longitudinal feed (X axis): 790 mm - vertical feed (Y axis): 406 mm - lateral feed (Z axis):  ...

MATEC 30 HV CNC machining center was built in 2001 in Germany by Matec Maschinenbau GmbH. The machine, designed for precision machining of oversized workpieces, is equipped with a number of reliable components with excellent specifications. This includes a tilting work head, a 24-position tool magazine and a chip extraction unit. All this is complemented by the intelligent BOSCH CNC control, in which advanced machining programmes are created in just a few steps. The MATEC CNC vertical machining center weighs approximately 15000 kg. Technical specifications of the MATEC 30 HV CNC milling machine - CNC controller: BOSCH TYP 3 OSA - feed in the X/Y/Z axis: 3000/600/800 mm - maximum spindle rotational speed: 9000 rpm - minimum spindle rotational speed: 20 rpm - spindle drive power: 16 kW - tilting work head - rotation angle of work head: ± 90° every 1° - 24-position tool magazi ...

Table length: 3200 mmTable width: 1000 mmLongitudinal X: 3000 mmCross Y: 1000 mmVertical Z: 1200 mmPositions ATC: 0  CNC Brand: HeidenhainCNC Model: TNC 426 Make MTE BF 32 Type 3200 BF Year 1999 Heidenhain TNC 426 Table length (mm)L = 3200 Table width (mm)W = 1000 Longitudinal X (mm)X = 3000 Cross Y (mm)Y = 1000 Vertical Z (mm)Z = 1200 iso50/30kW/2000 Rpm Manuel milling head 3 axis machines  

OKK VM5-II CNC machining center built in 2002 in Japan, is used for precision machining of workpieces. The machine features a large workspace, which includes among others a 30-position tool magazine and a reliable spindle, operating at a maximum speed of 8000 rpm. The design, made from high-quality raw materials, ensures exceptional rigidity and stability, even during the most intensive challenges. The OKK VM5-2 CNC vertical machining center weighs 6806 kg. Technical specifications of the OKK VM5-II CNC milling machine - CNC controller: FANUC Series 16i-M - feed in X/Y/Z axis: 1020/510/510 mm - work table dimensions (L x W): 1049 x 561 mm - maximum spindle rotational speed: 8000 rpm - 30-position tool magazine - tool holder: BT 40 - number of T-slots: 5 - installed power: 47 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3330 x 2830 x 3000 mm - weight of mach ...

Table length: 6000 mmTable width: 1500 mmLongitudinal X: 5000 mmCross Y: 1250 mmVertical Z: 1050 mmCNC Brand: HeidenhainCNC Model: TNC 415 Floor Type Milling machine  Make Soraluce 5 Type FS 5000 Year 1992 Soraluce fs 5000 TNC 415 in 5 Axis Table length (mm) L = 6.000 Table width (mm)W = 1.500 Longitudinal X (mm)X = 5.000 Cross Y (mm)Y = 1.250 Vertical Z (mm)Z = 1.050 Index Orthogonal 3 Gr.Iso 50 / 30 kW / 100 % Chip conveyor 7000 mm  

Longitudinal X: 1 mmCross Y: 1 mmVertical Z: 1 mmSpindle taper: 1  Positions ATC: 1   Clamping system TecnoMagnet - MCC  2 magnetic Tables and 1 controll unit Electropermanent magnetic clamping system Clamping all kind off jobs such as; Face milling, lateral drilling, Round bar facing and slots drilling Coupled parts machining ans forged parts machining Edge milling and chamfering plates machining on right angle Flattening through drilling and pocket execution Seperate MCC Control box with quick connection Table Length:  430mm Table Width:   375mm Table Height:  95mm Number of poles:56 Length:        375mm Width:         430mm Height:        95mm Weight:        350kg

Table length: 3000 mmTable width: 800 mmLongitudinal X: 3000 mmCross Y: 800 mmVertical Z: 1000 mmPositions ATC: 0  CNC Brand: HeidenhainCNC Model: TNC 355 Make TosTypeFSS-8 Year 1991 Tos FSS 80 CNC bedmilling machine Table length (mm) 3000 Table width (mm) 800 Longitudinal X (mm) 3000 Cross Y (mm) 800 Vertical Z (mm)1000 630 mm CNC Rotary table Iso 50 Automatic head CNC Heidenhain TNC 355

Producer TOS Kurim Type FGS 63 B Table size 630 x1800 mm Longitudinal X=axis 1400 mm Cross Y=axis 850 mm Vertical Z=axis 500 mm Milling Head Huron type Spindle taper ISO 50 DIN 2080 Spindle speed vertical 30 - 4000 rpm. Dimensions L x W x H 3.0 x 4.3 x 2.4 m Weight 6800 kg Year 1999 Power 15 kW Extra toebezubehör; SONY digital read out 3 axes Coolant system Machine is in perfect condition absolute no WEAR Machine is under power in our warehouse location Enschede The Netherlands

YCM FP100A CNC machining center was built in 2014 in Taiwan. Equipped with state-of-the-art technology and components from renowned brands, the machine is used for precision 3D machining of heavy workpieces weighing up to 1000 kg. During machining, the reliable spindle built in IDD (Isolated Direct Drive) technology moves on roller guides from Japanese company IKO, which minimises the effects of bending torque and also ensures high positioning accuracy. In addition, the use of precision ceramic bearings guarantees quiet operation and long life of the spindle. The FP100 A milling center is offered with a comprehensive range of equipment, including a 30-position magazine with automatic tool changing and an intuitive CNC control by HEIDENHAIN. The controller’s excellent optimisation and multitude of functions significantly simplify operation and enable advanced machining programmes to  ...

YCM FP66A CNC machining center was built in 2013 in Taiwan. The machine, equipped with components from renowned brands and state-of-the-art technology, is used for precision 3D machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a powerful spindle, rotating at a maximum speed of 16000 rpm, and cutting tools taken from a 30-position magazine. The spindle moves in the X,Y,Z axis on roller guides of the Japanese company IKO with ball-and-screw systems, directly driven by digitally controlled servomotors. This solution ensures high positioning accuracy and repeatability over a long period of use. The FP66 A CNC vertical machining center also features a high-quality cast-iron gantry structure, which, correlated with the extra-wide base resting on the ground, minimises the effects of bending torque resulting from the hanging mass of the spindle. Th ...