used Wood shredding systems for sale

BRUKS Wood chip plant/chipper model 1302M Infeed width max. 375mm, height max. 250mm, length 6-7m Number of blades: 2 Dimension knife: 400 x 135 x 14mm Chip Length Standard: 15 - 30mm Capacity: 30m3/hr 55KW Weight approx.: 2300 Kg No foundation required Subject to change

Single-shaft shredders Technical Specification: Hopper opening: 600 x 800 mm Hopper capacity: 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of the knives: concave / 40 x 40 mm, cutting turning crowns concave / 30 x 30 mm, scraper blade Screen perforation: 15/20 mm Lacquering: Frame in RAL 5010, Tricher in RAL 7016 (HoKuTech standard paint) Connected load: 400 V +/- 5 % / 50 Hz For material: chipboard, MDF/HDF, softwood/hardwood, OSB inclusive: - Control cabinet (Rittal) with 5 m cable - Electrical control (PLC Siemens) - Star triangle run-up - Rubber oscillating elements - E-rotor with knife pockets milled into the profile - Transmission limit switch - 1st row of knives - Hold-down device on the slide for long and large parts - Large 4 ...

Hacker Lindner T 650/220-2 with Virborinnen with scraper conveyor with metal detector 55kw...

turning speeds: 90 U/minfunnel opening L-W: 800 x 1.200 mm: 1,1 m³rotor dia: 354 mm: 40 mmDust suction hood: 200 mmDimensions (L/W/H): 2.650 x 1.740 x 1.730 mmweight: ca. 2 ttotal power requirement: 37 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chipper Plant, Wood Chipper, Drum Chipper, Disposal Line RUDNICK & ENNERS: Vibro troughs total approx. 30 meters long, 50cm wide Conveyors Sieving Scraper conveyor Sweep Drum sieve with metal detector Wood chipper HEINOLAN: Year of construction 2001 Feed opening: 650x250 mm Feeding speed: 84.5 m/min good condition - fully functional Can still be viewed during operation. Location: Austria, near Graz

Hackeranlage hacker Rudnick Enners 500 200 motor 45kw 500mm 200mm vibrorynne detecktor metau scratch conveyor technology

Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector

Mobile cultivator Starchl MK50 FEEDER 450/450 engine diesel 190hp Hours 300

Chipper Shredder Teknamotor Skorpion 500 EB/2 – Polish production – year of production 2008 – DTR, CE – efficiency up to 14 mq/4 TECHNICAL PARAMETERS: inlet width 500 mm inlet height 130 mm shaft diameter 400 mm shaft width 515 mm main engine 45 kW number of knives 2 pcs. knife length 515 mm toothed shaft pulling from below lower shaft motor 1.5 kW toothed shaft pulling from above upper shaft motor 1.5 kW length of the feed belt length of the receiving belt 3000 mm 3800mm belt width 500 mm front/back belt feed transport dimensions (length/width/height) 500 / 240 / 220 cm weight approximately 2500 kg

Vecoplan VTH 65.20.3 Year of construction 2013 Infeed width 650 mm Inlet height 200 mm Motor 55 kW 3 feed rollers in good condition Electrical control cabinet Vibrating trough 650x200x6000 mm