LDPE film pelletizing line – ACS800/120 compactor + single screw
extruder, 450–550 kg/h (NEW, built to order)
POL-SERVICE Majcher – manufacturer and supplier of plastic
processing machines with over 30 years of experience.
We offer a complete LDPE film pelletizing line ACS800/120 –
Compactor & Extruder & Pelletizing Machine, designed for processing
clean LDPE films into 3–5 mm pellets. The line is supplied as a
brand-new system, built to order, with configuration tailored to the
Customer’s requirements.
The target output capacity is approx. 450–550 kg/h, depending on
input material condition and process parameters.
Application of the ACS800/120 line
The line is suitable for processing:
– LDPE films (production scrap, rolls, reels, tubular film,
bags),
– light LDPE film offcuts and similar thin-film waste.
The technological process includes:
– feeding film by belt conveyor,
– simultaneous cutting, compacting and pre-drying in the
compactor,
– melt plasticizing in the 120/42 single screw extruder with double
vacuum degassing,
– melt filtration on a P2000 piston-type screen changer,
– water-ring pelletizing, dewatering, drying and pneumatic conveying
of pellets to a storage silo.
Main components of the ACS800/120 line
1. Belt conveyor with optional metal detector
– Belt width: 600 mm
– Belt material: PVC
– Motor power: 1.5 kW with inverter (ABB/Schneider/Inovance)
– Optional metal detector (multi-frequency technology): working
width 500 mm, high sensitivity to Fe, non-ferrous metals and stainless
steel (IP65), interlocked with the main control system to stop feeding
when metal is detected.
2. 800 L compactor
– Total volume: approx. 800 L
– Main motor: AC 110 kW (e.g. WEG)
– Rotary blades: 9 pcs (D2 tool steel)
– Fixed blades: 5 + 1 pcs (D2)
– Bearing support with water cooling (soft water), NSK bearings
Compactor options:
– Inverter – adjustable compactor speed, energy saving approx.
10–15%
– Sliding gate with 0.4 kW servo motor – controls material feeding
into the extruder
– Dust & moisture collector – pre-drying and dust extraction
(exhaust fan 2.2 kW)
– Nip roller – feeding film rolls into the compactor (1.5 kW)
3. 120/42 single screw extruder
– Screw diameter: 120 mm
– L/D: 42:1
– Max. screw speed: 105 rpm
– Screw and barrel:
– Feeding zone: bimetal (38CrMoAlA nitrided steel + Ni-based
alloy),
– Other zones: 38CrMoAlA nitrided steel, hardness HRC 56–60 –
high resistance to abrasion, corrosion and temperature
– Heating zones: 7; total heating power approx. 60 kW (ceramic
heaters with stainless steel covers)
– Cooling: 6 × 0.56 kW air fans
– Main motor: AC 160 kW (WEG) with ABB/Schneider/Inovance
inverter
– High-torque gearbox, machining precision IT5, low noise, designed
for > 50,000 hours of stable operation
Double vacuum degassing system
– Vacuum pump: approx. 4 kW
– Two-zone vacuum chamber, water filtration
– Temperature and pressure resistant vacuum hoses
– Efficient removal of moisture and volatiles from the melt –
improved pellet quality
4. Double piston screen changer P2000
– Type: double piston
– Filtration area: approx. 1014 × 2 cm² (P2000)
– Non-stop screen changing – no line shutdown, no strand
breakage
– Max. working pressure: up to 35 MPa
– Max. temperature: up to 350°C
– Built-in static mixer – improved product stability
(Alternative filtration systems available, e.g. laser filter SCF350D
as an option for specific applications.)
5. Water-ring pelletizing system, dewatering and drying
– Water-ring die section:
– Die body: 40Cr
– Die plate: 38CrMoAlA
– Hole plates: φ2.8 / φ2.5 mm (2 plates included)
– Die heating power: 6 kW
– Water-ring pelletizer: 3 kW motor with ABB/Schneider/Inovance
inverter
– Cutting blades: material M2, 3 pcs, high toughness and
flexibility
Vibrating screen
– Vibrator motors: 0.25 kW × 2
– Product/water-contact parts: SUS304 stainless steel
– Bolted sieves for easy replacement and protection of the water
pump from contamination
Centrifugal dryer
– Motor power: 5.5 kW, 1460 rpm
– Product and water contact parts: SUS304
Pneumatic conveying and silo
– Air blower: 3 kW
– Pipes and storage silo: SUS304
– Silo volume: approx. 700 L
– Sound-proof insulation on pipes and silo
6. Central electric control cabinet (PLC-based)
– PLC: Siemens / Inovance with industrial HMI and LAN
connectivity
– Frequency inverters: ABB / Schneider
– One button START” and One button STOP” – automatic start-up
and shutdown sequences
– Emergency stop and limit switches on all key operating and
rotating parts
– Optimized temperature control and overheat protection for the
compactor
– CE-compliant design and manufacturing
Utilities and power supply
– Installed power: approx. 376 kW, typical consumption ~70% of
installed power
– Power supply: 3×380 V + N + PE, 50 Hz
– Process/cooling water: approx. 1 t/h, recirculated (T1 up to
15°C, ΔT ~ 5°C)
– Compressed air: 0.6 m³/min, 0.4–0.7 MPa
– Operation staff: approx. 2 persons
Execution, availability and other configurations
– The ACS800/120 line is manufactured to order, with configuration
and options (filtration system, metal detection, dedusting, side
feeding, etc.) agreed individually.
– Condition: NEW, unused, 0 operating hours.
Other capacities and configurations available
In addition to the ACS800/120 line, we also offer pelletizing lines
with different parameters and throughput ranges – both smaller and
larger systems (various extruder diameters, different cutting and
filtration systems, different automation levels). On request, we
design and configure the line individually according to the type of
material to be processed and the required output capacity.
Tests, technological acceptance and commissioning
– It is possible to carry out test runs of the line at our facility
using the Customer’s material – this allows verification of
throughput, process stability and pellet quality.
– The line price includes a technological acceptance with a trial
run at our plant using the Customer’s material.
– At extra cost, we can provide on-site commissioning at the
Customer’s plant and staff training in operation, adjustment and
basic maintenance.
For over 30 years POL-SERVICE Majcher has specialized in the
production and overhaul of plastic processing machines. We offer
extruders, complete profile lines, granulation lines, recycling lines,
mills, shredders and other auxiliary equipment. We provide
plasticizing systems, heaters, wear parts, commissioning services and
test runs on the Customer’s material. Feel free to check our other
machine offers.