Inv. Num. : 8365 Type: TC 720 Producer: Adige Created: 2003 Parameters: Cutting range (logs): 12-80 mm Cutting area (square): 10x10-70x70 mm Cutting area (rectangle): 15x10-80x70 mm Cutting length: 50-3000 mm Solid bar section: 12-30mm Weight: 2100 kg Equipment: Adige ST 660 (automatic deburring machine)

ALDURO Metal Band Saw MBS-180SK Section cap. up to 180 mm round 4 belt speeds 22 / 33 / 45 / 65 m/min. Vise opening 260 mm Cooling system Hydr. Lowering Motor power 0.75 kW, 400 V Weight approx. 130 kg 0041 62 922 68 28

Inv. Num. : 8276 Type: LMSD 400 NORMA Producer: ALUMA Created: 1999 Parameters: The saw is in good condition.

Capacity round maximum diameter: 530 mmAngle degrees maximum: 90Capacity square: 10000 mmWorkpiece height: 1 mmWorkpiece width: 1 mmCapacity rectangle: 1 mm Band saw AMADA - HFA 530 A Automatic kerf compensions MultipleJob  Feed selection Double column guidance Adjusting doiuble wire brushes Return conveyor with lane changer Capacity 90°:       530 x 530° Feed single stroke: 10 mmmm Feed multiple stroke:10000 mmmm Cutting speed Vario:15 - 120 M/Min Circle blade size:  6670 x 67 x 1.7mm Power:              7.5kW Length:             3015mm Width:              1900mm Height:             1900mm Weight:             6300kg

Hydraulic Horizontal Band Saw AMADA H 650 HD Year of construction: 1998 Blades dimensions: 5040 x 38 x 1,4 mm Cutting capacity: Ø 405 mm Square cutting capacity: 400 x 400 mm Cutting capacity at 45°: 560 x 305 mm Cutting capacity at 90°: 635 x 405 mm Maxi jaws opening: 650 mm Jaws height: 280 mm Cutting angle: from 0 to 45° Motor power3,7 kW Auto descent Hydraulic angular rotation Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 3000 mm Height in high position: 2400 mm Height in low position: 1800 mm Weight: 2,5 T

cutting diameter: / mmsaw band length: 8800 mmcutting width: / mmtotal power requirement: / kWweight of the machine ca.: / trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: / mmsaw band length: 8800 mmcutting width: / mmtotal power requirement: / kWweight of the machine ca.: / trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: / mmsaw band length: 8800 mmcutting width: / mmtotal power requirement: / kWweight of the machine ca.: / trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmdimensions of saw-band: 3505 x 25 x 0,95 mmtable height: 450 mmcutting speed: 10 - 110 m/mintotal power requirement: 3 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 2,0 x 2,2 x 1,4 mFully automatic band saw- including chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting capacity: round material diameter: 10mm-250mm, rectangular material X/Y: 10x10mm-300x250mm, saw blade dimensions X/Y/Z: 27mm/0.9mm/3505mm, saw blade speed: 90m/min, stroke: 400mm, tank capacity: hydraulics: 30l, cooling lubricant: 85l, table height: 700mm, max. workpiece weight: 1500kg. Dimensions X/Y/Z: approx. 2000mm/2400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Amada HA-250 ll Horizontal Band Saw Saw blade size 3505 x 34 x 1.1 mm Cutting speed 24 - 90 m/min Cutting performance : - round (0°) 30 - 250 mm - square (0°) 250 x 250 mm - Rectangle (0°) 300 x 250 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Leaf: Length: 4570 mm Width: 32 mm Thickness: 1066 mm Engine: Blade 3.7 kW Hydraulics: 1.5 kW Band Size: Taper Disc RVS-25 Coolant Pump M - 30 Wire Brush M - 27 Cable Length: Speedometer: 1700 mm Wire brush: 840 mm repaired and functional. It's not an overhauled machine

Height under guides: 90 mmThroat: 0 mmTable length: 400 mmTable width: 400 mm Make  Amada HA 4 Type HA 400 Year 1982 Bandsaw automat Capacity round max. diam.Cap = 400 x 400 Angle degrees max.Speed = 15 - 90M Type machine: Vert./Hor.Power 5.5 kW Workpiece height (mm) Chip conveyor Workpiece width (mm)Load = 2500 kg Capacity rectangle (mm) 90 Gr. Cutting Capacity square (mm)Bundel clamp Managing the cycle of automatic travel included various lengths in the same quantity cycle Control of pressure and cutting speed Pressure regulation of vice clamping Screw chip conveyor Coolant system  

cutting diameter: 270 mmsaw band length: 2880 x 27 mmcutting width: 0.9 mmweight of the machine ca.: 0.4 tdimensions of the machine ca.: 1.6 x 0.7 x 1.5 mSaw blades: 5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUDATECH (GEMMA GROUP) double head electronic cut-off machine model DH550: - for cutting PVC, aluminium, wood-aluminium profiles - all electronically managed: touch-screen programmer model TS9003, windows operating system, with USB socket for downloading cutting lists and with office ethernet connection - fixed left head, and mobile right head with automatic sliding on THK guides and with brushless motors - blade diameter 550mm, with micro-drop cutting lubrication - inclination of the heads from 22.30° to 157.30° managed by CNC - cutting length between the two blades from 380 to 4000mm - for cutting lengths greater than 4 m: possibility of automatic workpiece recovery by means of the moving head - 4 adjustable horizontal pneumatic clamps - 2 adjustable vertical pneumatic clamps - pneumatically operated central intermediate support - Profile support roller conveyor combined  ...

Machine in good condition with sliding table Operational with suction device

Stainless steel base jaws for pipe cutting in the range of Ø 24 mm - Ø 120 mm (Ø 1 - Ø 4.72) and a maximum wall thickness of 7 mm (a slow motor is used for cutting thicker pipes). Stainless steel auxiliary jaws for Ø 5 mm - Ø 108 mm (Ø 0.25 - Ø 4.25) included Thanks to the twist handle, the cutting speed is controlled and steady. Clean and accurate vertical cut - deviation less than 0.25 mm. Cutting without tube deformation due to concentric multiple clamping. Limited vibration due to jawing near the saw blade. Possibility to adjust the handle. A concentric fixation of the pipe with stainless steel jaws prevents contamination of the stainless steel pipe. The frame can also be used for orbital beveling and orbital welding. Weight: 44 kg Drive: 230V 1200W high-speed motor with the possibility of clamping the cutting blade in two positions (the motor is supplied in its own  ...

Offer 24373 Specifications: - Cutting range 450 - 522 mm - Cutting area with additional clamping jaws 312 - 452 mm - Wall thicknesses up to 5 mm - Cutting speed infinitely adjustable - Central pipe clamping via handwheel - 6 pieces of additional clamping jaws - Drive 220 V / 1200 Watt - Coolant device - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 240 kg

Band Saw Bauer 450 V -CE marking -Stepless speed regulation -Projection 430mm -Cutting height 230mm -Working height 850mm -Saw motor 1.4 KW -Mint condition -Replacement saw blade -Machine feet Dimensions: Jpyzij8By LxWxH0.7x0.8x1.9 meters / Weight approx. 450Kg

Offer 25114 Technical data approx.: - Roll diameter 500 mm - Projection 500 mm - Max. passage height 400 mm - Table size 630 x 530 mm - Table swivel 10 / 30 ° - Table height from the floor 950 mm - Saw blade length approx. 3900 mm - Saw bandwidth approx. 3 - 25 mm - Cutting speeds ( presumably ) 81 – 145 – 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space requirement approx. W 750 x H 2000 x D 1000 mm

Saw blade dimensions: 3660mm/27mm/0.9mm, cutting range at 90° round material/flat material: 300mm/385mm x 220mm, saw blade speed: 20m-70m/min, saw blade roller diameter: 450mm, power: 1.5kW, machine dimensions X/Y/Z: approx. 220mm/1500mm/1200mm. On-site inspection is possible.

cutting diameter: 300 mmsaw band length: 3900 mmtotal power requirement: 3 kWweight of the machine ca.: 0,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: - mmsaw band length: - mmtable height: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23426 Specifications: - Cutting range at 90° around 420 mm - flat 635 x 290 mm - Cutting range 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Stepless cutting speeds 18 to 108 m/min - Hydr. Raising + lowering the saw frame - Hydr. Material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine is mounted on bogie - Feed roller conveyor mot. driven 4000 mm - Discharge roller conveyor with dimension stop 6000 mm - Space requirement approx. W 2500 x H 1400 x D 1100 mm - Weight machine approx. 950 kg - Weight roller conveyors 2000 kg

cutting diameter: 500 mmsaw band length: 5200 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1.8 tdimensions of the machine ca.: 2,8 x 1,4 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band Saw -Bauer S300 -Cutting Capacity/Flat/ 90 Degree - 300mm -Saw blade length 3900x25x0.9mm -Belt speed 20-70m/min -Stepless cutting pressure regulation -Mitre cutting device -Machine rollers Dnxhnj Dimensions: LxWxH 2.3x1.3x1.5 meters /weight 550Kg

A semi-automatic Bauer band sawing machine is available. Cutting range 90°: round material diameter: 320mm, flat material X/Y: 320mm/320mm, saw blade dimensions X/Y/Z: 4150mm/34mm/1.1mm, band speed range: 30m-120m/min, power: 2.2kW. Tension force adjustment: 10bar-40bar, cut-off length min./max.: 5mm-2000mm, stroke length: 1500mm, working height: 800mm. Machine dimensions X/Y/Z: approx. 3400mm/2200mm/1450mm, weight: approx. 1300kg. On-site inspection is possible.

cutting diameter: 250 mmcapacity 90 degrees: flat: mmband speed: 40 / 80 m/minsawing motor: 1,3 kWlength of draw-in: 600 mmsaw band length: mmtable height: mmweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,4 x 1,6 x 1,8 mAutomatic band saw- Feed length max. 500mm- with multiple stroke- chip conveyor- including some saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity round maximum diameter: 1 mmAngle degrees maximum: 1Capacity square: 1 mmWorkpiece height: 1 mmWorkpiece width: 1 mmCapacity rectangle: 1 mm Band sawBEHRINGER - HBP 313 A MACH-ID 9038 Make: BEHRINGER Type: HBP 313 A

Capacity round maximum diameter: 1 mmAngle degrees maximum: 1Capacity square: 1 mmWorkpiece height: 1 mmWorkpiece width: 1 mmCapacity rectangle: 1 mm Band sawBEHRINGER - HBE 321 A DYNAMIC MACH-ID 8917 Make: BEHRINGER Type: HBE 321 A DYNAMIC Control: Behringer TOUCH Year: 2017 Capacity 90°:      320° Cutting flat 90°:  350 x 320mm Feed single stroke:650mm Min. cutting length:70mm Cutting speed Vario:15 - 110 M/Min Circle blade size: 4440 x 34 x 1,1mm Power:             3,7kW Chip conveyor:     Yes Length:            2500mm Width:             2000mm Height:            1900mm Weight:            2000kg

Capacity round maximum diameter: 1 mmAngle degrees maximum: 1Capacity square: 1 mmWorkpiece height: 1 mmWorkpiece width: 1 mmCapacity rectangle: 1 mm Band sawBEHRINGER - HBP 530 A MACH-ID 8915 Make: BEHRINGER Type: HBP 530 A Year: 2001 Capacity 90°:      530 x 530° Min. cutting length:40mm Max. sawing:       17 - 110 Power:             12kW Chip conveyor:     Yes Length:            4000mm Width:             2250mm Height:            3270mm Weight:            4400kg

Capacity round maximum diameter: 260 mmAngle degrees maximum: 400Capacity square: 0 mmWorkpiece height: 0 mmWorkpiece width: 0 mmCapacity rectangle: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat Bandsaw  Angle L / R Degrees   L + R Cutting capacity 90 ˚ Ø260 mm Cuttting capacity 90 ˚ Flatt  260 x 400 mm mm  

This Behringer HBE 511 A was manufactured in 2018. Ideal for precision metal cutting, this Metal Band Saw features a robust design and is well-suited for a variety of metalworking applications. Consider the opportunity to buy this Behringer HBE 511 A Metal Band Saw. Contact us for more information.

Cutting capacity at 90°: round material: 260mm, flat material: 300mm/260mm, saw blade length: 4640mm, saw blade width: 34mm, saw blade thickness: 1.1mm, sawing speed: 140m/min, power: 4kW, machine dimensions X/Y/Z: approx. 2500mm/2300mm/1500mm, weight: approx. 1500kg. Including roller stand. Documentation available. On-site inspection is possible.

Specifications: Sawing area 90° round: 300 mm 90° flat: 300 x 300 mm Feed rate: 10 mm Multi-feed: 6000 mm Max. sawing speed: 0 - 115 1/min Dimensions (WxDxH), approx.: 2580 x 2300 x 1850 mm Equipment: -Conveyor - Coolant device - Emergency stop push button

cutting diameter: 300 mmsaw band length: 4640x41x1,3 mmcutting width: 300 mmcutting speed: 19-130 m/mintotal power requirement: 7 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,3x2,3x1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a Behringer automatic sawing machine max saw diameter 310mm Max material dimension 500300mm Piece length automatic operation from 100mm Residual piece length manual from 10mm Cutting speed 20-140 1/min Quantity of cooling lubricant 60 System / Belt Tension Pressure 60bar Motor power sawing operation 4 KW Motor power hydraulic pump 1.5 KW Motor power cooling lubrication pump 0.12 KW Motor power chip conveyor 0.09 KW Operating voltage 400V 50Hz Control voltage 24V DC Fuse 25A Cable cross-section min 54mm² Dimensions approx. 300015001900mm High Weight 2300kg Accessories: Conveyor Roller conveyor documentation and about 25 pieces of new saw blades

cutting diameter: 400 mmsaw band length: 500 mmtable height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr.- Two-Column Miter - Metal Band Saw Machine Specifications: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Mitre adjustment by handwheel - Saw blade dimensions 5400 x 38 x 1.3 mm - Incisional speed. infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min -one. Material clamping - Preselection of the lifting height of the saw blade - Micro spray coolant device - Total drive power 400 V / 8 kW - Space requirement approx. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Feed + discharge roller conveyors each approx. 6000 / 8000 mm

Material feed in any length (max. stroke 610 mm) Cutting diameter: round 510 mm, flat 500 x 500 mm Cutting speed adjustable via controller: 25 - 235 m/min Conveyor Operating instructions, circuit diagrams and spare parts lists available Just under 5,000 sawing hours For more technical data, see photo or on request Machine weight: approx. 3 t

cutting diameter: 670 mmsaw band length: 8800 mmcutting width: 1,6 mmband speed: 16 - 100 m/mintable load: 15 ttotal power requirement: 18 kWweight of the machine ca.: 7 tdimensions of the machine ca.: mAutomatic band sawBehringer HBP 650 AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mmsaw band length: 4100 mmcutting width: 32 mmturning speeds: 130 U/mintotal power requirement: 5 kWweight of the machine ca.: ca. 3 trequired space: 2,45 × 3,00 × 1,89 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 270 mmsaw band length: 5800 mmcutting width: 41 mmcutting speed: 20-140 m/minControl: weight of the machine ca.: 3 tdimensions of the machine ca.: 800 x 350 x 250 cm x cm x cmSaw blades: Div. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: d = 325 mmband length: 500 x 50 x 2,5 mmstroke: 48 / 75 / 118 h/mintotal power requirement: 2,2 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: LBH 1,8 x 0,7 x 1,0 mSawing range up to: Ø 325 mm or 280 x 280 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Behringer-KS-400-HY-01[printfriendly] X Attention –––Promotions! X Some prices are available until X 31.10.2015 reduced by 20% Hydr. Hacksaw Behringer KS 400 HY Make: Behringer Type: KS 400 HY Masch.-Nr.: 688286 Year of manufacture: 1998 / 2015 tüp. Comm. No.: 3990600/009 Special fixed price: 5.940,- € | now 4.752,- € Specifications Sawing range up to: Ø 400 mm, 350 x 350 mm, 380 x 300 mm Saw blade dimensions: 650 x 50 x 2.5 mm 3 lifting speeds: 40 / 62 / 90 strokes/min. Drive power: 3.0 kW Weight: approx. 820 kg Footprint: W 1.80 x D 0.65 x H 1.25 m Machine color: off-white/red Equipment 3 lifting speeds Stepless cutting pressure adjustment Prestressed plate guide of the saw bracket Dust-tight closed gearbox Accelerated return stroke of the saw bracket Closed Oil Hydraulic System Coolant Setup Limit stop sw ...

Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc

Machine Details Stock-No. 1105-04064 Type of machine Band Saw - Automatic - Horizontal Make BEHRINGER Type SLB 240 A Year of manufacture 2016 Type of control conventional Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis free loaded truck, ex stock HAGUENAU Technical details cutting diameter 260 mm saw band length 4100 x 32 x 1.1 mm cutting width 260 mm feed length 600 mm range L-W-H 2.5 x 2.2 x 1.6 m Weight of the machine approx. 2.2 t Additional information automatic band saw Chip Conveyor hydraulic pump good working condition

cutting diameter: 215 mmband length: 400 mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 230 mmband length: 375 mmcapacity 90 degrees: round: 230 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,28 tdimensions: 1,2 x 1,25 x 1,0 mAutomatic hacksaw- Coolant system- Machine feetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 230 mm: 2730 mm: 320 mm: 230 mm: 320x130 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.