Vertical machining center UM-85 ACCUWAY Year of construction 2019 New, in the box. Net price is 39,000 euros. Warehouse in Dresden. Viewing by appointment

bore capacity in steel (diameter): 22 mmthroat: 270 mmspindle turning speed - stepless: U/minweight of the machine ca.: 1.1 tdimensions of the machine ca.: 1.2 x 1.2 x 2.2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread capacity: -M 3,5 thread pitch: x mmthroat: 100 mmtable-size: 180x180 mmweight of the machine ca.: 0.140 twww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 350 x 250 x 256 mm - Control: AGIEVISION - Dimensions (long x wide x high): 2.215 x 2.215 x 2.220 mm - Weight: 3.600 kg - Maximum power consumption: 9 kVa - Display: 15 LCD - Type of EDM : WIRE - Max. workpiece weight: 200 kg

An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 700mm/400mm/330mm, table dimensions X/Y: 850mm/400mm, speed: 12000rpm, tool holder: BT-30, rapid traverse: 60m/min, tool positions: 21, max. tool weight: 3kg, max. tool length: 200mm, positioning accuracy: +/-0.01mm, repeat accuracy: +/-0.003mm. Machine dimensions X/Y: approx. 2100mm/2550mm, weight: approx. 2400kg. The spindle is defective and must be replaced. The encoder cable is also defective. Documentation available. On-site inspection is possible.

: 40-1080 tool taper: MK 5 weight of the machine ca.: 2 tfeed: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Drilling capacity: 40mm, spindle mount: MK4, drill chuck: 1mm-13mm, throat depth: 250mm, quill stroke: 160mm, table dimensions X/Y: 620mm/470mm, column diameter: 120mm, spindle speed: 1420rpm. Machine dimensions X/Y/Z: approx. 900mm/725mm/1800mm, weight: approx. 615kg. The on/off switch of the machine must be replaced. An on-site inspection is possible.

Offer 23025 Specifications: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable 80 - 1420 rpm - Right - Counterclockwise rotation - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 620 mm - Table with 2 T-slots 600 x 450 mm - Height adjustable via rack with hand crank - Drive 380 V / 1.0 / 1.5 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

Offer 25173 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Tapping device ST 60 to M 24 - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Projection 330 mm - Table with 2 T-slots 610 x 430 mm - Max. distance table – drilling spindle approx. 665 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Drilling spindle speeds infinitely variable 65 - 2000 rpm - Digital speed display -Lighting - Coolant device - E. footswitch - Drive 400 V / 0.6 / 1.8 kW - Space requirement approx. W 1000 x H 2050 x D 1150 mm - Weight approx. 470 kg

Column Drill Manufacturer: Alzmetall Model: AB 35 S Holder MK 3 incl. vise

Drilling capacity steel/GG: 32/45 mm Spindle holder: 4 MK Projection: 300 mm Table size: 445 x 445 mm Quill stroke: 160 mm Spindle speeds: 57 - 1340 rpm Feeds: 0.1, 0.2, 0.3 mm Drive motor: 380 V, 1.4/2.2 kW Space requirement: 920 x 620 x 1880 mm Weight: approx. 440 kg

Description Drilling Machine, Stand Drilling Machine, Column Drilling Machine, Column Drilling Machine -Table size: 400 mm - Spindle holder: MK4 -Projection: 320 mm -Speeds: 80-700 rpm -Columns: Ø 160 mm -Spindle stroke: 175 mm -VIP gearbox -Feed: 0.09-0.28 mm/rev -Tachometer defective -Dimensions: 1100/500/H1960 mm -Weight: 650 kg

Drilling capacity steel/ cast iron: 35/45mm, length: 1100mm, width: 600mm, height: 2050mm.

bore capacity in steel (diameter): 40 mmthroat: 340 mmbore stroke: 170 mmtable surface area: 560 mm0: 80 - 720 U/minfeed: 0,09 - 0,16 - 0,28 mm/Utool taper: MK 4 total power requirement: 3,0 kWweight of the machine ca.: 0,65 tDrill with:FeedCoolant pumpNew drill chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22635 Defective Heavy Duty Column Drilling Machine Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 170 mm - Projection 345 mm - Rotary table with 2 T-slots 550 mm - Max. distance table – drilling spindle 650 mm - Max. distance from base plate to drilling spindle 1000 mm - Feeds 0.09 - 0.16 - 0.28 mm/rev - AZ continuously variable transmission with manual transmission - Drilling spindle speeds infinitely adjustable 40 - 720 rpm -Right. - Counterclockwise rotation - Drive 400 V / 2.5 kW -Lighting - Coolant device - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

bore capacity in steel (diameter): 40 mmthroat: 325 mmbore stroke: 170 mmtable surface area: 730 x 590 mm0: 130 - 1200 U/minfeed: 0,09 - 0,16 - 0,28 mm/Utool taper: MK 4 total power requirement: 1,8 kWweight of the machine ca.: 0,7 tdimensions: 1,2 x 0,8 x 2,15 mDrill with:Feed2 gearsLeft/right rotationFoot switchMachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25095 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1 50 - 175 rpm - Level 2 175 - 640 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance between machined base plate and drilling spindle approx. 1250 mm - Coolant device -Lighting - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance between machined base plate and drilling spindle approx. 1250 mm - Coolant device -Lighting - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

bore capacity in steel (diameter): 40 mmthroat: 345 mmbore stroke: 200 mmtable surface area: 720 x 560 mm0: 60 - 765 U/minfeed: 0,15 - 0,2 - 0,3 - 0,36 mm/Utool taper: MK 4 total power requirement: 3,0 kWweight of the machine ca.: 0,4 tDrill with:Feed2 gearsLeft/right rotationFoot switchCoolant pumpMachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25170 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Level 3 120 - 420 rpm - Level 4: 420 - 1530 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance machined base plate - drilling spindle 1250 mm - Coolant device -Lighting - Machine vise - div. 10 pcs HSS - Drill - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Manufacturer: Alzmetall Type: AB 40 ST Spindle: MK 3 Bgtf39Yocw Table dimensions: 745 x 460 mm Machine can be viewed under power

Alzmetall AB 40 SV Price 9500,-€ Drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed rate Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2.4KW Machine weight approx. 500kg

: ja feed: 80 - 800 m/min: 1848 weight of the machine ca.: 2,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24479 Specifications: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 65 mm - Drilling spindle holder MK 5 - Drilling spindle stroke 240 mm - Projection 385 mm - Table with 2 T-slots 610 mm -Max. Distance between table and drilling spindle approx. 820 mm -Max. Distance base plate – drilling spindle 1325 mm - Column diameter 220 mm - Feeds 0.10 - 0.14 - 0.20 - 0.28 - 0.40 mm/rev - Drilling spindle speeds infinitely variable 85 - 1620 rpm - Drive 380 V / 4 kW -Lighting - E. footswitch - Space requirement approx. W 750 x H 2350 x D 1500 mm - Weight approx. 1350 kg

Speeds infinitely variable from 40 - 800 rpm 4 drill feeds . Clearly good original condition

bore capacity in steel (diameter): 25 mmthroat: 295 mmbore stroke: 160 mmspindle turning speed - stepless: 65-1750 U/minfeed stepless: 0,15 mm/Umorse taper: MK3 table-size: 510 x 400 mmtotal power requirement: kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: TBH 1,00 x 0,50 x 1,85 m- automatic feed- Work light- drill chuck- Operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Chuck -Documentation Dq2Nwr Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg

bore capacity in steel (diameter): 65 mmthroat: 390 mmbore stroke: 250 mmspindle taper MT: 5 table-size: 880x670 mmspindle turning speed - stepless: 40-800 U/minweight of the machine ca.: 1.2 twww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible.

number of spindles: - bore capacity in steel (diameter): - mmbore stroke: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity steel/cast iron: 32mm/40mm, spindle mount: MK4, throat depth: 322mm, quill stroke: 180mm, speed: 5000 rpm, table dimensions X/Y: 500mm/370mm, column diameter: 145mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/2350mm, weight: approx. 520kg.

Condition of the machine: We are selling a reliable and in good technical condition ALZRAPID 32. The motors of the drilling spindle and the axles were re-mounted and cleaned. The machine is ready for demonstration under power and available at short notice. For the technical data, please refer to the following description: Technical data: Spindle speeds: 102/152/204/250/304/408/ 500/608/816 /1000/ 1216/2000 Short spindle: MK4 Drilling capacity steel E 335 (St 60) 1): 32 mm Drilling capacity cast EN-GJL-200 (GG 20): 32 mm Motor: 1500/3000 rpm Accessories: - Digital display with glass scales -Tapping - R 0 L - Adjustment -Vice - Documentation and operating instructions

bore capacity in steel (diameter): 28 mmthroat: 293 mmbore stroke: 140 mmtable surface area: 415 x 300 mmspindle turning speed range: 160 - 2250 U/minfeeds: 0,1 / 0,2 mm/Utotal power requirement: 1,9 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: m- machine out of teaching shop -Accessories: DRO for spindle speed and quill stroke, drill chuck RÖHM 1 - 13 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24222 Specifications: - Drilling capacity in steel St 60 45 mm - Drilling capacity in steel St 60 55 mm - Drilling spindle holder long spindle MK 4 - Drilling spindle speeds AZ gearbox infinitely variable in 2 speed series - 40 - 760 rpm - Drilling spindle stroke 140 mm - Projection 300 mm - Column diameter 145 mm - Table with 2 T-slots 440 x 440 mm - Distance between table and drilling spindle min. / max. 35 / 640 mm - Drill spindle – machined base plate approx. 1150 mm - 3 feeds 0.10 - 0.20 mm/rev - Drive 400 V / 2.6 / 3.1 kW - Keyless chuck - Coolant device - Space requirement approx. W 600 x H 1800 x D 950 mm - Weight approx. 380 kg

Type: Alzmetall BAZ 26 Control: Heidenhain 426 Type: 3-axis machining center with chip conveyor Tool holder: SK 40 Tool magazine: 24 places / drum magazine Year of Make: 2003 Installation dimensions: length 4800mm x depth 3000mm (with control swivelled out 4000mm) x height 3000mm Axle travel: X=1200mm Y = 600mm Z = 800mm Weight: 8000kg Max. Spindle Speed: 9000rpm Rapid traverses in X, Y, Z: 40000mm/min. Tool cooling: External / internal cooling Status: Electrified / in production

Drilling capacity: 40 mmThroat: 870 mmSpindle taper: 0   SPECIFICATIONS Drilling capacity steel Ø  35 mm Drilling capacity cast iron Ø  40 mm Tapping MM 25 Spindle taper Mk  Mk 4 Spindle diameter Ø   60 mm Spindle travel  180 mm Max. distance spindle - table  80 mm Min. distance spindle - table   870 mm Floor / table area    700 x 600 mm Power2.2 kW Spindle speeds / ranges 65 - 1750 VARIO Rpm DIMENSIONS Length  1200 mm Width  800 mm Height 2400 mm  

Used machine in good condition. Available for immediate delivery. - Max. tool length: 300/225 [350/225] - Number of tool stations: 33 - Control: HEIDENHAIN ITNC 530 - Working area (X x Y x Z): 650 x 650 x 550 mm - C-axis: 360 ? - Max. tool weight: 10 kg - Operating hours: 51.651 - Axes: 5 - Power: installed max: 16 kW - Weight: 13.000 - Dimensions (long x wide x high): 2.345 x 4.250 x 2.600 mm

bore capacity in steel (diameter): 35 mmarm length: 700 mmworkpiece height max.: mmspindle taper MT: 3 spindle turning speed range: 100 - 1220 U/minfeeds: 0,125 - 1,25 mm/Uquill stroke: mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,5 x 0,8 x 2,3 mincluding cube 480 x 400 x 430mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in steel: approx. 28 mm Projection: 500 mm small/large distance between contact surface and drill quill: 1320 mm Quill stroke: 140 mm Spindle holder MK: 3 Table clamping surface: 700 x 850 mm Speeds: 100 - 1220 rpm Feeds: 0.1, 0.2 and 0.3 mm Spindle drive: 1.5 kW Space requirement: 1400 x 700 x 2050 mm

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 24 - Control: FANUC - Working area (X x Y x Z): 1.300 x 600 x 600 mm - Max. workpiece weight: 1.000 kg - Max. spindle speed: 9.000 rpm - Axes: 3 - Dimensions (long x wide x high): 3.550 x 2.568 x 2.171 mm

Hello Here are a few pictures. Blind hole cylinders, e.g. for cylinders for chainsaws, were manufactured on the machines. I couldn't photograph the interiors of the machine at the moment, because the doors are locked and the machine is off. Each machine has a row of spindles at the top and bottom with different numbers of spindles. Just let us know how you feel about it. Appendix Group 4: Anger 4 - HCP1 Anger HCH 12/5 BA0910 2005 Anger 4 - HCP2 Anger HCH 12/5 BA1113 2013 Anger 4 - HCP3 Anger HCH 12/5 BA0913 2005 Anger 4 - Coolant cleaning system Knoll VRF 900/6000 201228263 2012 Anger 4 - Washer Erdmann KET-1-W1-LT 204-622 Anger 4 - Centrifuge STA S15 MC-04-0057 2004 Anger 4 - Robot 1 Kuka KR 16 687401 2013 Anger 4 - Robot 2 Kuka KR 16 687402 2013 Anger 4 - Ewab chain Anger 4 - HCP 1 - Scraper belt conveyor Knoll 450 K-1/280 200419526 Anger 4 - HCP 2 - Scr ...

Recording MK 3 Drilling capacity 30 mm Quill stroke: 200 mm Drill milling unit can be swivelled 45° on the left and right Automatic motorized feed for the X-axis Coolant pump

Drilling capacity: 80 mmRadius: 2781 mmSpindle taper: 76  

Machine vise ATS NC-200VH Year of construction 2024 Jaw width: 200 mm Jaw height: 63 mm Total height: 173 mm Total length: 700 mm Max. internal wingspan: 330 mm Max. wingspan outside:540 mm with pull-down function Clamping force: 45kN Weight: 81 kg Mint condition, unused Price per piece Delivery possible

CNC control: Heidenhain TNC 640, 19 touchscreen - Cabin floor made of stainless steel - Stainless steel cover under machine doors - Housing of the pumps - Chip rinsing system - Double-arm tool changer with 30 places - Direct drive 10,000 rpm - Complete coolant device (coolant nozzles distributed in a ring around the spindle) - Chip conveyor (auger) - Workspace lighting - 3 colors signal light - Compressed air and coolant gun - Full fairing - Tightening bolt ISO 7388/B Type B, 6 pcs. - Blow-out device (spindle) - Emergency stop, button and button, release tool on the spindle - Portable electronic handwheel - Limit switch - Transport device (for crane transport) -User guide - CE Declaration of Conformity Specifications: Workbench: Clamping surface: 1,200 x 550 mm T-panel: number/ width/ distance: 5/18/100 mm max. workpiece weight: 1,000 kg Travel X-axis:  ...

drill diameter:5,,,,40 mmdrilling length:600 mmlip angle:90-150 °total power requirement:4,5 kWweight of the machine ca.:0,8 tdimensions of the machine ca.:2-2-2 mCNC programmable according to ISOPoint angle 90-140 degrees, disc stroke x 80mm y 80mmgrinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpmGrinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1Avyac grind / 4 faces gr. Cross for deep drill

x-travel: 4.000 mmy-travel: 2.100 mmz-travel: 1.000 mmtaper ISO: ISO 50 Number of revolutions: 5.000 rpmtable-size: 4.020x2.010 mmtable weight: 12.000 KgControl: Heidenhein iTNC530 Tools place: 32 fachrapid taverse: 15.000 mm/mintotal power requirement: kWweight of the machine ca.: 39 tdimensions of the machine ca.: 10680x5600x5100 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.