used
The HKB series swivel machines are used for bending thin sheet metal. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle stopper, these swivel machines are also suitable for the production of small batches. Compact and torsion-resistant Segmented upper tool for many bending options Integrated, manual bend compensation Adjustable angle stop for series production Hands free Foot control of the upper bolster clamp Workspace Working length 1270 mm Sheet thickness (max.) – 400 N/mm² 2 mm Dimensions (length x width x height) 1.6 m x 0.9 m x 1.18 m Weight 330 kg Angle range of the bending beam 135°
Workspace Workpiece, weight (max.) 500 kg Table dimensions 813 mm x 406 mm Distance spindle nose - table surface 580 mm Dimensions magnetic clamping plate 800 mm x 400 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel Travel X-axis 910 mm Y-axis travel 450 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 3.6 m x 2.4 m x 1.9 m Weight 3400 kg
Workspace Workpiece, weight (max.) 270 kg Distance spindle nose - table surface 580 mm Table dimensions 635 mm x 305 mm Dimensions magnetic clamping plate 600 mm x 300 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel X-axis travel 765 mm Y-axis travel 340 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 2.9 m x 2.2 m x 1.9 m Weight 2800 kg
Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW
Workspace Center width 1000 mm Turning diameter over bed 356 mm Circulating Ø over support 220 mm Bed width 206 mm Travel X-axis travel 178 mm Travel Z1 axis 92 mm Bsncqtycvju Swivel range upper slide ± 50° Main spindle Speed range, High 550 1/min - 3000 1/min Speed range, Low 30 1/min - 550 1/min Spindle mount Camlock D1-4 Spindle bore 38 mm Spindle Taper 5 MK Feed Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Tapping Tapping, Metric (37) 0.4-7 mm Tapping Whitworth (28) 4-56 TPI Tailstock Tailstock quill diameter 45 mm Tailstock cone 3 MK Tailstock quill stroke 120 mm Tailstock transverse adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg
Electrode diameter 0.5 to 3mm Travels 300x400x350mm CE certification proves the best possible safety Complete series in above-ground construction Electrodes Ø 0.5-3mm Travel X-axis 300mm Travel Y-axis 400mm Travel Z-axis 350mm Travel W-axis 300mm Speed C-axis 30-60mm/min Rapid traverse Z-axis 120mm/min Aspect ratio 300:1 Table dimensions 320x440mm max. working current 30A
Technical Parameters Maximum cutting performance Round: 650mm Square 650×800mm Saw blade Speed 20~80 m/min Size 54X1.6 Guidances Tungsten carbide and bearing blade guides Cleaning Wire Brush & Flood Coolant Voltage Hydraulic Power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW
SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Inclination: 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Bsjuxvmq0O3 Saw blade speed 25-115m/min Butt welder capacity 3-16mm Engine Size: 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Circuit breaker Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welding machine, blade shears and grinding machine Nuttisch Low-voltage halogen lamp Mitre protection for oblique cuts Quick-gap stop for straight cuts
SKU BS-250M Return Manual Rake angle adjustment Ehrwinkelkopf Grit angle 1 – 60° Motor power 2.2 kW Cutting area 90° rectangular 259 mm x 110 mm Capacity Round 90° x 45° x 60° 227mm / 150mm / 90mm Square capacity: 90° x 45° x 60°, 220 x 220 mm / 144 x 144 mm / 84 x 84 mm Table height 889 mm Strip guide carbide and ball bearings Belt dimensions (H x W x L) 27 x 0.9 x 2470 mm Blade speed 20 - 85 rpm Lowering Control Hydraulic Support Drive Gear Operating voltage 230 V, 50 Hz, 1-phase Delivery weight: 216 kg Shipping dimensions (L x W x H) 1524 x 1118 x 1219 mm
Weipert W 500e Crankshaft Grinding Bench Weipert W 500e Grinding lathe Centering tip: Röhm 110 H MK5 Machine length: 5200 mm YOC 1967 Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!
Weipert Crankshaft Grinding Bench Grinding Machine Weipert Grinding lathe Machine length: 4900 mm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!
Weipert Crankshaft Grinding Bench Grinding Machine Weipert Grinding lathe Centering tip: Röhm 110 H MK5 Machine length: 5100 mm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!
Weipert Crankshaft Grinding Machine Grinding Bench Weipert Grinding lathe Centering tip: Röhm 110 H MK5 Machine length: 5900 mm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!
Weipert Crankshaft Grinding Machine Weipert Grinding lathe Centering tip: Röhm 110 H MK5 Machine length: 4300 mm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!
Description the grey cast iron machine frame convinces with stability and torsion alimness, precise guides and excellent workmanship all guideways are reliably supplied with lubricant by an automatic central lubrication the working area is protected by an easily accessible enclosure the high-performance coolant pump is combined with the suction unit and binds the resulting grinding dust and aerosol during processing Grinding spindle the grinding spindle is large in size, dynamically balanced, completely sealed and permanently lubricated Prestressed precision bearings enable maximum grinding performance and reliability for many production hours Programming the high-quality ball-circuit spindle and the powerful servo motor guarantee precision and repeatability of positioning in the Y-axis for set-up work and for the manual process of the grinding spindle, th ...
Description Table shears from Weipertsuitable for tools, fixture construction, training and mould making Cutting length 3200mm Sheet thickness 16mm Technical data Sheet thickness (max.) 16 mm Working length 3,080 mm Extension 150 mm Cutting angle 0.3 - 2.5 degrees Strokes per minute 14 h/min Holder 18 pieces Holder pressure capacity 40 t Table dimensions 3.380x550x840 mm Backstroke Backstop depth 1,000 mm Front support arms Number of support arms 3 pieces Length of support arms 900 mm Drive power Engine power main drive 37 kW Hydraulic oil tank volume 350 l Dimensions and weights Dimensions (length x width x height) 4x2.2x2.42 m Weight 15.300 k
Weipert start hole drilling machine Flexibility and economic Producing micro-bores TECHNICAL DATA: Electrodes: 0.50-3mm Travel X-axis: 250mm Travel Y-axis: 350mm Travel Z-axis (Z1& Z2) 600mm Travel W-axis 300mm Feed X,Y,Z-axis 200mm/min Spindle speed 20-120rpm Aspect ratio 300:1 Table dimensions 436x316mm max. working current 30 A Table electrode 360mm Dielectrium container 25L Power 3.5kW Weight 600 Kg
Manufacturer:Weipert Model: W 1400 Year of Manufacture: 1973 /1999 Type of Machine : CNC Lathe Operation Type: CNC Control System: R&D MTC 3 Number of Axes: 2 Max Swing Over Bed: 1420 mm Max Diameter Over Support: 960 mm Max Turning Length: 5500 mm Special Notes: Fully overhauled Find more here - / Contact us at -
serial number: 13691 3-jaw-chuck diameter: 400 mm centre height: 450 mm centre distance: 2000 mm tail stock: ja rapid clamping device: 4 seiten digital readout: ja nachgerüstet steady: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Swing diameter over bed/bed slide: 480mm/340mm, turning length: 800mm, center distance: 1000mm, swing diameter in the recess: 540mm, spindle bore: 52mm, speed: 1400rpm. Quill taper: MK4, manual quill adjustment: 160mm, upper part displacement: 10mm. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/1350mm, weight: approx. 2300kg. On-site inspection is possible.
Rotation diameter over bed/bed slide: 480mm/340mm, turning length: 800mm, center distance: 1000mm, spindle bore: 52mm, speed: 1400rpm, quill taper: MK4, quill adjustment: 160mm, upper part displacement 10mm, machine dimensions X/Y/Z: approx. 2600mm/1100mm/1350mm, weight: approx. 2300kg. On-site inspection is possible.
turning diameter over bed:500 mm turning diameter over slide rest:310 mm turning length:1500 mm spindle turning speed range:7 - 710 U/min feed range:5,6 - 224 mm/min total power requirement:15 kW weight of the machine ca.:3,7 t dimensions of the machine ca.:2,9 x 1,4 x 1,6 m Machine with 2-axis digital readout - MULTIFIX quick tool change device - 3-jaw chuck
turning diameter over bed: 630 mm turning length: 1000 mm speeds: 5,6-560 U/min spindle bore diameter: 80 mm diameter of quill: 100 mm quill travel: 250 mm tool-holder: 190 mm taper in tailstock MT: MK5 weight of the machine ca.: 5,8 t dimensions of the machine ca.: 3,3 x 1,65 x 1,55 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 430 mm centre distance: 1500 mm Turning diameter over slide: 295 mm spindle bore: 42 mm morse taper: MK 4 bed width: 375 mm face feeds: 0,01-2,23 pinole diameter: 60 mm weight of the machine ca.: 2000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
greates pass round over bed: 480 mm swing diameter over bed slide: 300 mm turning length: 1500 mm centre height: 240 mm centre distance: 1500 mm spindle bore: 42 mm spindle turning speed range: 14 - 1400 U/min total power requirement: kW weight of the machine ca.: 2,4 t dimensions of machine L x W x H: 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 650 mm turning diameter over slide rest: 440 mm turning length: 7000 mm centre height: 330 mm centre distance: 7000 mm spindle bore: 61 mmø spindle turning speed range: 8 - 800 U/min total power requirement: kW weight of the machine ca.: 5,9 t dimensions of machine L x W x H: 8,75 x 1,35 x 1,48 m Accessories: face plate 450 mmø, 4-pos. tool holder, running center, coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 650 mm turning diameter over slide rest: 440 mm turning length: 7000 mm centre height: 330 mm centre distance: 7000 mm spindle bore: 61 mmø spindle turning speed range: 8 - 800 U/min total power requirement: kW weight of the machine ca.: 5,9 t dimensions of machine L x W x H: 8,75 x 1,35 x 1,48 m Accessories: face plate 450 mmø, 4-pos. tool holder, running center, coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 440 mm turning diameter over slide rest: 250 mm turning length: 1000 mm spindle bore: 62 mm spindle speed:: 124 - 1400 tailstock quill taper MT: 4 quill stroke: 160 mm metrical thread cutting: 0,5 - 112 mm/U thread - inch: 1/4 - 56 inch. total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 2,6 x 1,1 x 1,50 m Qick Toolholders: Face plate: 3-jaw-chuck diameter: 3-jaw-chuck diameter: Weipert precision guide and spindle lathe WG 425 The machine comes from a training company and has been maintained more than second hand. The general condition is very good, all functions have been checked. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Voest Alpine Weipert NC 500S heavy duty lathe hydraulic steady Sauter toolchanger with 12 positions VDI-tooling Driven tools + C-axis Heidenhain manual Plus 4110 (retrofitted) Swing over bed: 540 mm Swing over cross-slide: 450 mm Distance centre tot centre: 1000 mm Dia of spindle bore: 77 mm Power on the spindle: 35 kW Number of speeds: 11 > 4000 rpm Command: Heidenhain Manual Plus ACCESORIES: yes Toolchanger: yes Number of tools: 12 positions (driven)
turning diameter over bed: 720 mm turning diameter over slide rest: 500 mm turning length: 1000 mm spindle turning speed range: 7.1 - 1800 U/min feeds - fine adjustment: 6 - 6,28 mm/U feeds crossrail-slide horizontal: 0,005 - 6,28 mm/U spindle drive: 15 kW centre height: 360 mm spindle bore: 82 mm total power requirement: 28 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,8 x 1,4 x 1,8 m 3-jaw chuck: 315 mm Qick Toolholders: Multifix GR. 8 Digital Read Out: Acu-Rite Face plate: 600 mm motorized top slide: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
