used 10 for sale

Sunrise IW-80SD Hydraulic Profile Steel Shear and Hole Punch with Double Cylinder Specifications: Hole punch: Punching pressure: 80 t Punching capacity: ø 26 x 22 mm Projection: 510 mm U-steel height: 180 mm Max. stroke length: 100 mm Stroke rate / min (20 mm stroke): 29 Working height: 1050 mm Profile steel shears: 90°: 152 x 152 x 13 mm 45°: 80 x 80 x 10 mm Working height: 1165 mm Motor power: 7.5 kW Dimensions (LxWxH), approx.: 1830 x 820 x 1760 mm Weight, approx.: 2650 kg Equipment: - Electrical contact length stop - Incl. all protective devices - Footswitch for both stations - Extensive accessories (punches and dies)

TECHNICAL SPECIFICATIONS: Clamping Force: 650 ton Shot Weight (Max): 2375 g Distance Between Tie-Bars (H): 1100 mm Distance Between Tie-Bars (V): 960 mm Platen Size (H): 1510 mm Platen Size (V): 1440 mm Screw Diameter: 90 mm Mould Height (Max): 950 mm Mould Height (Min): 450 mm Daylight Between Platens (Max): 1850 mm Opening Stroke (Max): 1400 mm Ejector Force: 9,50 ton Ejector Stroke: 250 mm Screw L/D Ratio: 25 Screw Speed: 190 rpm Screw Torque: 5000 N·m Injection Volume: 2610 cm³ Injection Pressure: 1583 bar Injection Rate: 751 cm³/s Nozzle Force (Max): 15 ton Nozzle Stroke (Max): 700 mm Plasticising Capacity: 123.50 g/s Heating Zones: 9 Heating Capacity: 46.40 kW

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Sanyo MIR-253 Refrigerated Incubator -10°C – +50°C SANYO's MIR series refrigerated incubators are considered exceptional units suitable for a wide range of applications as they offer a temperature range of -10°C to 50°C. In the pursuit of temperature precision and improved usability. These incubators contain an 8-bit microcomputer and control the heater and compressor within a precise range of ±0.2 °C and ±1 °C, respectively. In addition, MIR-153 can be applied to a variety of experimental patterns using a 3-step microcomputer program. This refrigerated incubator is designed to meet a wide range of advanced experimental needs, ranging from microorganism cultures and plant germination tests to various constant temperature experiments. The MIR-253 has the following features: Microprocessor control with feedforward function Energy savings CFC-free, on-site foamed ...

Hood Dishwasher Hobart UXTLH-A-SEF / UXTLH-10A Year: 2018 - Dishwasher, hood type dishwasher - Manufacturer: Hobart - Model: UXTLH-A-SEF - 400V 50Hz 3/N - 21.6 kW - Year of construction 2018

Year of construction: 2000 Material: PS Butto output up to 1300kg/h Special equipment is the winding machine with which you can cut narrow films from (150mm -100mm) or for example: 8x175mm or 2x700mm The machine has been regularly maintained and is in good condition!

Year of Make: 1989 Clamping area of the table: 900 x 300 mm Table height above floor: 1000 mm Equipment: Automatic deep infeed with roughing and finishing 2 grinding spindle speeds Rapid traverse for height adjustment electr. Magnetic clamping plate: 600 x 250 mm Grinding wheel flange with disc Wet grinding equipment Good condition

Year of construction 2010 Piston diameter: 12 mm Volume: 6.5 cm³ with electric heating, without cooling unit

1 temperature control unit HB Therm HB 100 U 1 Year of construction 2010 + 1 Easytemp 6/95 temperature control unit Year of manufacture 2007

Year of construction 1991 Centre width: 430 mm Grinding diameter: 0.5 - 100 mm with internal grinding spindle quick adjustment enlarged infeed DC Raised grinding table Hand-operated axial stop Dressing device for cylindrical dressing Lever quick clamping with extraction system and air cleaner Unifil 1 MRV 20 from 2017

Travel ranges X/Y/Z: 400 / 300 / 140 mm Table clamping surface WxD : 700 x 375 mm Passage: 200 mm Dimensions WxDxH: 769 x 836 x 901 mm Traversing speed X/Y/Z max. 6 m/min. (for KG drive 16x10) max. 3.6 m/min. (for KG drive 16x4) Ball screws 16x10 / 16x10 / 16x10 mm, backlash-free adjustment (optionally 16x4 mm in X/Y/Z) Guidances Linear units with precision steel shafts and recirculating ball slides, adjusted without backlash Control EdingCNC with 3 power amplifiers 48V/4.2A, integrated control computer and power supply 500 W with processor board EdingCNC software, compatible with Windows® Connected loads: 230V, 16A The iCP 4030 milling machine is ideally suited for processing materials such as plastic, foam, wood and circuit board materials and is therefore particularly predestined for use in vocational schools, training institutions, small serie ...

Arburg 270 C300-100 Year of manufacture 2007 Clamping force: 30 tons. Screw diameter: 20 mm Spraying weight: 28 gr. Max. spray pressure: 2500 bar incl. integrated Arburg Multilift 2 Core moves

KRAUSS MAFFEI KM 420-1900/55 CZ 2 Component Machine Stock No.: 503534 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control: MC 4 Year of Make: 2004 Operating hours: 76000 h Technical data closing page Clamping force: 4200 kN Wooden dimension h x v: 800 x 800 mm Panel size h x v: 1270 x 1200 mm Min. installation height: 380 mm Plate spacing max.: 1400 mm Opening travel: 1020 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of movable plate D: 200 mm Centering of fixed plate D: 200 mm Tool weight: 6700 kg Technical Data Spray Side Screw diameter: 70 mm Capacity: 1047 cc Spray pressure: 1778 bar Screw length: 20 l/d Screw speed: 527 min Plasticizing current: 95 g/s PS Injection flow to the outside: 953 g/s hp Number of heating zones: 6 2. Aggregate 55 with ø 22 Spray pressure: 1674 bar Volume: 30cm³ Distance sprayer 1 to 2: 300 mm (pig ...

Straight and cut machine Wafios R31 Diameter: 1-5mm – 7mm MY: 1993 – working condition Machine Number: 26106224 Extension length: 2m or 6m available Pay-Off: not available, we can offer separate for 3t. Mechanically refurbished Electrical checked Machine is in working condition

Weiler Condor 81 - Universal lathe - K+C 3-axis position indicator - Bison 3204-160 3-jaw lathe chuck - Collet chuck + various collets - Feed protection - Multifix - Coolant device - Swarf back wall - Full service carried out (oil change, belt change, etc.) - Year of construction 1984 Specifications - Circumferential Ø over bed: 330 mm - Circulating Ø over face slide: 185 mm - Turning length between tips: 750 mm - Turning length between tips with covered guide and pull spindle: 650 mm - Tip height: 165 mm - Bed width: 240 mm Fulcrum shaft: - Spindle head DIN 55027: size 5 - or similar to DIN 55029 (Camlock D1): size 4 - Spindle Ø in the front bearing: 70 mm - Spindle passage: 40 mm - Inner cone according to DIN 228: MK5 - Centering tip according to DIN 806: MK3 - Face plate Ø max.: 280 mm - Chuck Ø normal: 160 mm - Chuck Ø maximum: 200 mm Tool slides: ...

Ho Chun UH-1250A - CNC Bed Milling Machine - Heidenhain TNC-320 CNC control - Electronic handwheel HR-410 - Heidenhain glass measuring rods in all axes - Ball screws - Hydraulic tool feeder - AC servo feed motors - Sliding doors with safety glass - Universal milling head - Hardened membranes - Plastic-coated counter guide -Electromagnet. Main spindle brake - Automatic central lubrication - Integrated coolant system - Steel telescopic cover for transverse path - Steel telescopic cover for longitudinal travel - Work light - Year of construction 2011 Specifications Workbench: - Table clamping surface: 1800 x 500 mm - Max. workpiece weight: 1000 kg Travel: - X-axis longitudinal travel: 1250 mm - Y-axis transverse travel: 540 mm - Y-axis - transverse travel with steel telescopic cover: 500 mm - Distance between spindle center and stand: 500 mm Stand: - Z-axis ...

59 Pcs. Machine Feet / 7 Models - for leveling machines of all kinds - 23x 250/150/90 mm - 18x 200/120/100 mm - 6x 250/150/100 mm - 3x 240/100/80 mm - 4x 150/150/50 mm - 2x 250/115/70 mm - 3x 200/200/60 mm

- incl. key Specifications - Table diameter: 400 mm - Table height: 40 mm - Rotation range: 360° - Pan/tilt range: 0 - 90 ° - Max. load capacity (horizontal table): approx. 200 kg - Max. load capacity (table vertical): approx. 100 kg - Dimensions mounting plates horizontal/vertical: 375 x 500 / 375 x 255 mm - Dimensions rotary table WxHxD (table horizontal): approx. 570 x 280 x 500 mm - Net weight: approx. 200 kg

Meba ECO 335 DGA - Automatic band saw - Material feed up to 600 mm - Year of construction: 2002 Specifications - Cutting range 90° round/flat: 335 / 500x335 mm - Mitre right 45° round/flat: 330 mm / 320x335 mm - Mitre right 30° round/flat: 200 mm / 200x335 mm - Clamping range bundle tension width/height: 0-500 mm / 15-335 mm - Single/Multiple Material Insertion: 0-600 mm / 0-9999 mm - Leftover piece length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min (AC drive) - Cutting pressure: infinitely hydraulic - Lowering speed: 0 - 300 mm/min (infinitely variable) - Saw blade dimensions: 4400 x 34 x 1.1 mm - Saw blade tension: with torque wrench - Max. contact weight: max. 250 kg/m - Working height: 750 mm - Noise emission: 74 dB(A) Connection data: - Power supply: 3x 400 V / N / PE / 50 Hz - Compressed air: 6 - 8 bar, min. 50 l/min  ...

Special price € 4,100 instead of 4,930 excl. VAT Solberga SE2030 - Gear drilling machine (new) Recording: MK3 Capacity: 30 mm - The drill head can be swivelled 360° around the column and is height-adjustable. - The gearbox is built with our traditional and tested technology for the highest possible torque. Helical gears in combination of steel and reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. - The spindle is made of steel and ensures optimal concentricity of the tool thanks to its adjustable tapered roller or ball bearing. The machine has an adjustable spindle return spring. This allows the restoring force to be adapted to the weight of the tool. - Automatic feed (M model) - When the preset drilling depth is reached, the spindle returns to its original positio ...

Special price € 9,200 instead of € 11,040 excl. VAT Thomas Super Trad 301 So Easy - Semi-Automatic Metal Band Saw - The SO EASY saw allows a complete cutting cycle without the constant presence of the operator, thanks to the hydraulic control system for lowering the saw frame - Hydraulic vise - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch to MANUAL cutting mode with button to quickly access the material to be cut - Central control panel at the front of the machine with illuminated alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large round work table plateau that rotates with the mitre of the saw blade, guaranteeing excellent support for the material to  ...

Indumasch V 204 - Angle-adjustable notching machine Cutting length: 200 mm Capacity: 4 mm - Stroke adjustment with digital display - Lateral clippings ejection - Workplace lighting - Foot pedal Specifications - Cutting length: 200 mm - Cutting capacity steel: 4 mm - Cutting capacity stainless steel: 3 mm - Stroke rate: 60 /min - Cutting angle adjustment: 30 - 135 ° infinitely variable - Table dimensions: 1000 x 800 mm - Oil tank: 60 l - Motor power: 4 kW - Operating voltage: 400 V - Dimensions WxHxD: 1000 x 1480 x 1600 mm - Weight: approx. 970 kg More products, information & prices on metallmaschinen.at

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2003 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW G0Cmy7Z - Power DC motor Z-axis: 12 Nm - Power DC motor X-axis: 4 Nm - Motor pump power:  ...

Peddinghaus 210/11 - Profile steel shears - Machine mounted on turntable (Ø 1270 mm) for individual working position Specifications Flat steel shears: - Knife length: 220 mm - Sheets: 11 mm - Flat steel: 120 x 13 mm Profile steel shears: - Stroke rate: approx. 55 /min - Angle iron: 80 x 8 mm - T-iron: 80 x 8 mm - U & I steel: 120 mm Steel bar shears: - Round steel: 32 mm - Square steel: 30 mm Notch: - Sheets: 10 mm - Latch width: 40 mm - Latch depth: 80 mm Hole punch: - Punching capacity: Ø 25 x 11 / Ø 20 x 13 mm Installation: - Motor power: 1.8 kW - Operating voltage: 400 V - Dimensions WxHxD: 1270 x 1900 x 1270 mm - Weight: approx. 1000 kg

Urban AP 6500 F - Travelling column milling machine - Heidenhain iTNC 530 path control, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 6 chip drawers - Swivelling clamping device for 6200 mm workpiece length - 12 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Security fence - Safety bumper - Safety light curtains - Machine guard pneumatically vertical opening Specifications - Travel X/Y/Z: 6500 / 155 / 110 mm - Working range X/Y/Z with swivel device: 6200 / 155 / 110 mm - Space requirement with security fen ...

Deckel FP3A 2820 - CNC Milling Machine - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamp - Automatic speed manual transmission - Automatic clamping in X/Y/Z axes - Automatic central lubrication - Coolant device - Direct displacement measurement - Collision protection clutch in Z/Y axes - Built in 1987 Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke vertical: 80 mm Cpovd9Rv - Vertical milling head can be moved to the headrest: 150 mm Main Drive: - Motor: pole-switchable three-phase brake motor and manual transmission with clockwise/counterclockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Level Jump: 1.25 - Tool holder: SK40 (M16) - Tool  ...

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...

Kunzmann WF4/3 - Universal milling machine - Heidenhain position display - Stepless feed in all axes - Rapid traverses in all axes - Hydraulic tightening system - Rotary & swivel table - Electrical central lubrication - Coolant device - Workplace lighting - Machine feet - Year of construction 1995 Specifications Rotary & swivel table: - Clamping surface: 650 x 400 mm - Clamping grooves: 6 - Groove width: 14 H7 - Groove spacing: 63 mm - Max. load: 250 kg Workspace: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. distances: - Top edge of the table to horizontal spindle center: 140 - 540 mm - Top edge of the table to vertical lower edge of the head max.: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Quill stroke vertical: 60 mm - Vertical head swivels on both sides: 90 ° Feeds: - Feed ...

Say-Mak SPH 50 - Pneumatic Forging Hammer - Welded steel structure - Regular beating with valve adjustment - Pneumatic working system with 2 pistons -Hour meter - All dies and Sal-Block replaceable, Sal-Block adjustable in 8 directions - Adjustable sal block for the operator's working angle - Simple and functional automatic lubrication system for front and rear pistons - Adjustable foot pedal depending on working height and foot protection cover - 360° adjustable flanged plunger and plexiglass cover - Incl. steel foundation Specifications - Operating mode: pneumatic - Drop weight: 50 kg - Lifting height: 185 mm - Motor power: 4 kW - Weight: 1000 kg - Dimensions WxHxD: 730 x 1450 x 1750 mm

MTcut UE110-5A - 5-axis machining center - Heidenhain iTNC 530 SmarT.NC HSCI controller - 40-fold tool changer - Rotary table Ø 610 mm - Oil mist extraction - Hydraulic vice incl. elevation - Center clamp - Tool holders -Tool cabinet -Milling cutter -Magnetic disk - Solid CAM with iMachining, with post-processor - Halmer optical presetting device - Spindle A 3182 hrs - Year of construction 2016 Specifications Field of work: - X-axis travel: 1100 mm - Y-axis travel: 610 mm - Z-axis travel: 610 mm - Travel B-axis: -30 / +120 ° - Travel C-axis: 0.001 x 360 ° - Rapid traverse X/Y/Z: 36 / 36 / 24 m/min - Feed: 1 - 7500 mm/min - Positioning accuracy: ± 0.005 mm - Repeatability: ± 0.003 mm - Guides X/Y/Z: rollers 35 / 35 / 45 mm Roundtable: - Rotary table Ø: 610 mm - Speed: 50 rpm - Positioning accuracy: 15 - Workpiece weight: max. 500 kg - Spindle no ...

750 pcs Grinding Wheels - Mixed Lot / Large Batch - Various sizes, shapes and materials - The following sizes and quantities as well as many other grinding wheels are available: 45x 40 / 40 / 9 22x 50 / 10 / 10 1x 50 / 25 / 15 12x 50 / 35 / 22 7x 70 / 35 / 14 7x 75 / 10 / 8 34x 100 / 20 / 24 18x 100 / 20 / 25 3x 125 / 13 / 25 3x 125 / 25 / 32 7x 125 / 30 / 32 4x 150 / 50 / 50 14x 175 / 10 / 20 5x 175 / 10 / 32 38x 175 / 100 / 76 85x 175 / 11 / 48 6x 175 / 15 / 20 5x 175 / 30 / 20 1x 175 / 30 / 40 5x 175 / 35 / 20 12x 175 / 60 / 48 1x 175 / 60 / 65 15x 175 / 9 / 48 11x 200 / 10 / 48 16x 200 / 10 / 76 5x 200 / 20 / 20 5x 200 / 20 / 25 4x 200 / 25 / 32 2x 200 / 75 / 48 5x 245 / 30 / 82 144x 250 / 15 / 76 1x 250 / 15 / 82 1x 250 / 20 / 32 1x 250 / 20 / 75 2x 250 / 25 / 50 1x 250 / 30 / 50 2x 250 / 35 / 82 2x 250 / 40 / 38 28x 300 / 10 / 125 1x 30 ...

Special price 2.630,- instead of € 3.090,- excl. VAT - Exact setting of the drilling depth - Suitable for drilling and tapping (optional) - The drilling table is height-adjustable and can be rotated around the column - Made in Sweden Specifications - Drilling capacity: 25 / 28 mm - Quill stroke: 130 mm - Tapping capacity (steel / cast iron): M 16 / M 20 - Spindle holder: MK3 - Spindle speed: 129 - 1498 rpm - Gear stages: 4 - Max. distance spindle/table: 730 mm - Projection: 255 mm - Drilling table size: 500 x 400 mm - Column diameter: 100 mm - Motor power: 0.65 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 1720 x 500 mm - Weight: 185 kg

ESAB Numorex NXB 6000 - Plasma Cutting Machine - Year of construction 2009 Specifications - Cutting width: 3200 mm - Cutting length: 16000 mm - Max. cutting thickness of mild steel: 200 mm - Raceway height: 500 mm - Raceway length: 25000 mm - Cutting table height: 700 mm - Max. machine speed: 24000 mm/min - Max. number of individual burners: 1x P-VBA / 1x A / 1x A-VBA - Fuel gas: acetylene - Operating voltage: 3x 400 V - Power consumption: 9 kVA - Machine dimensions WxHxD: approx. 6900 x 4000 x 4500 mm - Machine weight: approx. 10000 kg

Automated laser marking system for radial and frontal marking of camshafts. The machine is not yet assembled and unused. - Siemens SIMATIC HMI S7 CNC control - Oval indexing belt with 32 pallets of two workpieces each - 2x Kuka KR50 R2.100 robot - Orientation station for angle alignment and type validation on the cam by means of a transducer - Opaque laser booth with Trumpf Laser Trumark 6030 and Fuchs extraction system - Light barrier for longitudinal alignment at the end of the shaft or workpiece edge - DMC Keyence SR-1000 readback camera for checking the marking quality - Technically possible cycle time approx. 18 sec. (acceptance of labeling max. 10 sec.) - Handheld scanner for program selection Specifications - Max. workpiece weight: 8 kg - Max. workpiece length: 550 mm - Max. workpiece diameter: 80 mm

Doosan PUMA 2600SY - 6-axis CNC turning center - Center width: 760 mm - Circumference Ø: 780 mm - Spindle bore: 86 mm - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 Bar Feeder - Year of construction 2011 Specifications Capacity: - Circumferential Ø over bed: 780 mm - Circumferential Ø over slide: 630 mm - Rec. Rotary Ø: 255 mm - Max. rotary Ø: 376 mm - Max. turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed belt type: 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing Ø: 140 mm - Spindle passage Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Sub-spindle speed (integrated): 6000 rpm - Sub-spindle nose: ASA A2-5 - Front counter-spindle bearing Ø: 90 mm - Sub-spindle passage Ø: 62 mm - Min. counter-spindle indexing angle (C-axis): 0.001° Tool turret: - Number of tool stations: 12 - Tool outer Ø:  ...

Ergomat TNG 32 + LNS Sprint 552 - Turning Center + Bar Feeder - FANUC 0i-TF CNC control - 60° inclined bed - Cross slides with linear guides - Parts separators - Coolant device -Conveyor - Switch-on time: 645 hours - Processing time: 390 hours - Year of construction 2022 LNS Sprint 552 - Bar Feeder - Rod Ø: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar passage Ø: 32 mm - Spindle speed max.: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Workspace: - Workpiece Ø/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide Gang Type: - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank Ø: 20 mm - Tool holder 4-point: 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Powe ...

Voest DA300-1000 - Universal lathe - 3-jaw lathe chuck Ø 400 mm - 4-jaw face plate Ø 600 mm - Grinding device Ø 200 mm - Multifix - Interchangeable gears - Instruction manual & documents - Year of construction 1975 Specifications Workspace: - Tip height: 300 mm - Circumferential Ø over bed: 620 mm - Circumferential Ø in offset: 800 mm - Circumferential Ø above the face slide: 360 mm - Length of the offset: 407 mm - Center width: 1000 mm - Max. workpiece weight between tips (without steady rest): 1800 kg Main spindle: - Spindle head: 8 DIN 55022 - Spindle bore: 83 mm - Inner cone: Metric 90 - Grit: MK5 Tailstock: - Quill stroke: 180 mm - Jaw Ø: 85 mm - Inner cone of quill: MK5 Grips: - Face plate Ø: 600 mm - Max. chuck Ø: 410 mm Main spindle speeds: - Number of steps: 18 - Range: 14 - 1000 rpm Feeds: - Length feed: 0.086 - 4.866 mm/rev (66)  ...

Urban AP 5000 F - Travelling column milling machine - Heidenhain track control TNC 410 M, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 2 chip drawers - Swivelling clamping device for 4700 mm workpiece length - 10 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Safety bumper - Machine guard pneumatically vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the tensioners have to be partially replaced - Contact cables of the cylin ...

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

Ho Chun U-1000B - Universal Bed Milling Machine - 3-axis position indicator - Universal milling head - Hardened and ground guideways - Infinitely variable feeds - Stepless speeds with 2 levels - Horizontal milling device - Hydraulic tool feed - Drive 11 kW - Automatic central lubrication - Coolant device - Table covering - CE certification - Incl. operating instructions and documents - Year of construction 2001 - Complete service carried out Specifications Workbench: - Table clamping surface: 1500 x 360 mm - Table load: 800 kg Travel: - X-axis longitudinal: 1000 mm - Y-axis transverse: 540 mm - Z-axis vertical: 430 mm Workspace: - Distance spindle nose / table: 50 - 480 mm - Distance between spindle center / stand: 350 mm Feeds: - Number of feeds: infinitely variable - Feed longitudinal / transverse: 16 - 1200 mm/min - Feed rate: 8 - 450 mm/min - Rapi ...

Intos FNGJ40 - Tool Milling Machine Automatic feed in all axes ACU-RITE 3-axis position indicator Hydraulic tool clamping Coolant Setup Workplace lighting Built in 1999 Specifications Workspace: - Horizontal longitudinal movement of the table (axis X): 600 mm - Horizontal transverse movement of the milling head (axis Y): 400 mm - Vertical movement of the table (axis Z): 400 mm Clamping surface of the vertical table: - Length x height: 500 x 320 mm - T-slots number/spacing/size: 5 / 50 mm / 14H8 Fixed angle table clamping surface: - Length x width: 800 x 400 mm - T-slots number/spacing/width: 8 / 50 mm / 14H8 Feed and rapid traverse: - Engine power/speed: 1.5 kW / 940 rpm - Feed stages: 18 - Feed range axis X and Y: 16 - 800 mm/min - Feed range axis Z: 8 - 400 mm/min - Rapid traverse axis X and Y: 2000 mm/min - Rapid traverse axis Z: 1000 mm/min - Maximum fe ...

ID3415 Metso Lokotrack 1415 S year/Baujahr 2015 9320 hours/hours 91 t Mobile impact crusher, opening width crusher: 1540 x 1170 mm, maximum feed size: 1000 mm, with feed hopper with side elevation, vibrating chute, pre-screen with side belt, crusher discharge conveyor belt, 1-deck screening machine 3500 x 1600 mm, conveyor belt under screening machine, stockpile belt, return conveyor belt Chain-mounted impact mill, opening width crusher: 1540 x 1170 mm, maximum feed size: 1000 mm, with feed hopper with side elevation, vibrating trough, pre-screen with side belt, crusher discharge conveyor belt, 1-deck screening machine 3500 x 1600 mm, conveyor belt under screening machine, stockpile belt, return conveyor belt

Shaft diameter 40 mm Roller diameter 152 / 162 mm Roller speed 8.5 rpm Drive motor 1.1 kW Infeed 120 mm Weight 470 kg Dimensions L/W/H 900 mm / 600 mm / 1,100 mm Accessories: some rollers

REFAKT Dryer/Centrifuge/Dry Cleaner Previously used for centrifugal drying of plastic waste. Throughput capacity 300 to 1000 kg/h, depending on the type of plastic and wall thickness. Drive power 30 kw

REFAKT Dryer/Centrifuge/Dry Cleaner Previously used for centrifugal drying of plastic waste. Throughput capacity 300 to 1000 kg/h depending on the type of plastic and wall thickness Drive power 30 kw

Dryer / centrifuge / dry cleaner REFAKT T 1004 Previously used for centrifugal drying of plastic waste. Throughput capacity 300 to 1000 kg/h, depending on the type of plastic and wall thickness. Drive power 30 kw

are selling a used Jungheinrich EMC 110 stacker. Nominal load capacity: 1000 kg A charger is integrated and can be charged via a 230V socket The battery is tested and in good condition.

Delivery rate 4.61 m³/min at 10 bar Delivery rate 5.23 m³/min at 8 bar Operating pressure 10 bar Nominal power 30.0 KW Operating hours 14,279 Load hours 11,148 Compressed air connection G1 1/4 Sound level 69 dB(A) Space requirement L - 1,400 x W - 830 x H - 1,640 mm Weight approx. 850 kg

Machine make / type HELLER / H 8000 Hours: 5800 Year of Make: 2020 Control: Siemens 840D SL Spindle: EPC unit (8,000 1/min, 60 kW, 1146 Nm) Tool clamping system: SK 50 Magazine / Places: Shelf / 265 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, KF 600, IKZ 70 bar, (working area flushing) Working range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additional options / special features: Holder for MSK attachment heads; Wireless probes Receiver (RENISHAW); Fast drill breakage control (SBBK); Interface suction; Windshield blowing device for service doors; Tool coding; Running control Conveyor; Integrated tool & tool Collision monitoring; 3 colors status lamp; Increased Tool weight 35kg; Scraper belt conveyor for Wet machining; coolant temperature controller; Feed force indicator; Tangential control;

Control: Siemens 840D PL Spindle: 7,000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Cyorjbwuiw Magazine / Places: Chain / 50 Seats Rotary table: 360,000° x 0.001° Coolant system: KNOLL, VRF 250, IKZ 50 bar, (working area flushing) Working range XYZ (mm): 1250 / 1000 / 1000 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additional options: Infrared receiver for measuring probe (BLUM); Multi-spindle head mounting; Fast drill breakage control (SBBK); Codechip WZ; Runtime and quantity recording; IPM; Windshield blow-off device for service door; evasion strategy; Tool planning with MCIS TDI