used 14 for sale

Approximately 140 halogen bell lamps, used but in good condition condition, Side brand, Minitower model, V230, Hz50. For information contact Mercury Auctions

TECHNICAL SPECIFICATIONS: Clamping Force: 650 ton Shot Weight (Max): 2375 g Distance Between Tie-Bars (H): 1100 mm Distance Between Tie-Bars (V): 960 mm Platen Size (H): 1510 mm Platen Size (V): 1440 mm Screw Diameter: 90 mm Mould Height (Max): 950 mm Mould Height (Min): 450 mm Daylight Between Platens (Max): 1850 mm Opening Stroke (Max): 1400 mm Ejector Force: 9,50 ton Ejector Stroke: 250 mm Screw L/D Ratio: 25 Screw Speed: 190 rpm Screw Torque: 5000 N·m Injection Volume: 2610 cm³ Injection Pressure: 1583 bar Injection Rate: 751 cm³/s Nozzle Force (Max): 15 ton Nozzle Stroke (Max): 700 mm Plasticising Capacity: 123.50 g/s Heating Zones: 9 Heating Capacity: 46.40 kW

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Year of construction 2013 Motor power: 7.5 kW Opening width: 450 mm Opening height: 200 mm Rotor diameter: 180 mm Rotor blade dimensions/number: 6 x225 mm, length 450 mm Strator knife dimensions/number: 4 x 225 mm, length 450 mm Knife material: 1.2080 DIN, hardness: HRC 54-56 Dimensions L x W x H: 930 x 730 x 1420 mm Feed hopper: Noise protection damped Cable capacity: up to 140 kg/h Plastic capacity 80 - 120 kg/h

Travel ranges X/Y/Z: 400 / 300 / 140 mm Table clamping surface WxD : 700 x 375 mm Passage: 200 mm Dimensions WxDxH: 769 x 836 x 901 mm Traversing speed X/Y/Z max. 6 m/min. (for KG drive 16x10) max. 3.6 m/min. (for KG drive 16x4) Ball screws 16x10 / 16x10 / 16x10 mm, backlash-free adjustment (optionally 16x4 mm in X/Y/Z) Guidances Linear units with precision steel shafts and recirculating ball slides, adjusted without backlash Control EdingCNC with 3 power amplifiers 48V/4.2A, integrated control computer and power supply 500 W with processor board EdingCNC software, compatible with Windows® Connected loads: 230V, 16A The iCP 4030 milling machine is ideally suited for processing materials such as plastic, foam, wood and circuit board materials and is therefore particularly predestined for use in vocational schools, training institutions, small serie ...

KRAUSS MAFFEI KM 420-1900/55 CZ 2 Component Machine Stock No.: 503534 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control: MC 4 Year of Make: 2004 Operating hours: 76000 h Technical data closing page Clamping force: 4200 kN Wooden dimension h x v: 800 x 800 mm Panel size h x v: 1270 x 1200 mm Min. installation height: 380 mm Plate spacing max.: 1400 mm Opening travel: 1020 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of movable plate D: 200 mm Centering of fixed plate D: 200 mm Tool weight: 6700 kg Technical Data Spray Side Screw diameter: 70 mm Capacity: 1047 cc Spray pressure: 1778 bar Screw length: 20 l/d Screw speed: 527 min Plasticizing current: 95 g/s PS Injection flow to the outside: 953 g/s hp Number of heating zones: 6 2. Aggregate 55 with ø 22 Spray pressure: 1674 bar Volume: 30cm³ Distance sprayer 1 to 2: 300 mm (pig ...

Weiler Condor 81 - Universal lathe - K+C 3-axis position indicator - Bison 3204-160 3-jaw lathe chuck - Collet chuck + various collets - Feed protection - Multifix - Coolant device - Swarf back wall - Full service carried out (oil change, belt change, etc.) - Year of construction 1984 Specifications - Circumferential Ø over bed: 330 mm - Circulating Ø over face slide: 185 mm - Turning length between tips: 750 mm - Turning length between tips with covered guide and pull spindle: 650 mm - Tip height: 165 mm - Bed width: 240 mm Fulcrum shaft: - Spindle head DIN 55027: size 5 - or similar to DIN 55029 (Camlock D1): size 4 - Spindle Ø in the front bearing: 70 mm - Spindle passage: 40 mm - Inner cone according to DIN 228: MK5 - Centering tip according to DIN 806: MK3 - Face plate Ø max.: 280 mm - Chuck Ø normal: 160 mm - Chuck Ø maximum: 200 mm Tool slides: ...

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Power-operated tool clamps horizontally and vertically - Automatic speed manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual  ...

Indumasch V 204 - Angle-adjustable notching machine Cutting length: 200 mm Capacity: 4 mm - Stroke adjustment with digital display - Lateral clippings ejection - Workplace lighting - Foot pedal Specifications - Cutting length: 200 mm - Cutting capacity steel: 4 mm - Cutting capacity stainless steel: 3 mm - Stroke rate: 60 /min - Cutting angle adjustment: 30 - 135 ° infinitely variable - Table dimensions: 1000 x 800 mm - Oil tank: 60 l - Motor power: 4 kW - Operating voltage: 400 V - Dimensions WxHxD: 1000 x 1480 x 1600 mm - Weight: approx. 970 kg More products, information & prices on metallmaschinen.at

Urban AP 6500 F - Travelling column milling machine - Heidenhain iTNC 530 path control, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 6 chip drawers - Swivelling clamping device for 6200 mm workpiece length - 12 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Security fence - Safety bumper - Safety light curtains - Machine guard pneumatically vertical opening Specifications - Travel X/Y/Z: 6500 / 155 / 110 mm - Working range X/Y/Z with swivel device: 6200 / 155 / 110 mm - Space requirement with security fen ...

Deckel FP3A 2820 - CNC Milling Machine - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamp - Automatic speed manual transmission - Automatic clamping in X/Y/Z axes - Automatic central lubrication - Coolant device - Direct displacement measurement - Collision protection clutch in Z/Y axes - Built in 1987 Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke vertical: 80 mm Cpovd9Rv - Vertical milling head can be moved to the headrest: 150 mm Main Drive: - Motor: pole-switchable three-phase brake motor and manual transmission with clockwise/counterclockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Level Jump: 1.25 - Tool holder: SK40 (M16) - Tool  ...

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...

Kunzmann WF4/3 - Universal milling machine - Heidenhain position display - Stepless feed in all axes - Rapid traverses in all axes - Hydraulic tightening system - Rotary & swivel table - Electrical central lubrication - Coolant device - Workplace lighting - Machine feet - Year of construction 1995 Specifications Rotary & swivel table: - Clamping surface: 650 x 400 mm - Clamping grooves: 6 - Groove width: 14 H7 - Groove spacing: 63 mm - Max. load: 250 kg Workspace: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. distances: - Top edge of the table to horizontal spindle center: 140 - 540 mm - Top edge of the table to vertical lower edge of the head max.: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Quill stroke vertical: 60 mm - Vertical head swivels on both sides: 90 ° Feeds: - Feed ...

Say-Mak SPH 50 - Pneumatic Forging Hammer - Welded steel structure - Regular beating with valve adjustment - Pneumatic working system with 2 pistons -Hour meter - All dies and Sal-Block replaceable, Sal-Block adjustable in 8 directions - Adjustable sal block for the operator's working angle - Simple and functional automatic lubrication system for front and rear pistons - Adjustable foot pedal depending on working height and foot protection cover - 360° adjustable flanged plunger and plexiglass cover - Incl. steel foundation Specifications - Operating mode: pneumatic - Drop weight: 50 kg - Lifting height: 185 mm - Motor power: 4 kW - Weight: 1000 kg - Dimensions WxHxD: 730 x 1450 x 1750 mm

MTcut UE110-5A - 5-axis machining center - Heidenhain iTNC 530 SmarT.NC HSCI controller - 40-fold tool changer - Rotary table Ø 610 mm - Oil mist extraction - Hydraulic vice incl. elevation - Center clamp - Tool holders -Tool cabinet -Milling cutter -Magnetic disk - Solid CAM with iMachining, with post-processor - Halmer optical presetting device - Spindle A 3182 hrs - Year of construction 2016 Specifications Field of work: - X-axis travel: 1100 mm - Y-axis travel: 610 mm - Z-axis travel: 610 mm - Travel B-axis: -30 / +120 ° - Travel C-axis: 0.001 x 360 ° - Rapid traverse X/Y/Z: 36 / 36 / 24 m/min - Feed: 1 - 7500 mm/min - Positioning accuracy: ± 0.005 mm - Repeatability: ± 0.003 mm - Guides X/Y/Z: rollers 35 / 35 / 45 mm Roundtable: - Rotary table Ø: 610 mm - Speed: 50 rpm - Positioning accuracy: 15 - Workpiece weight: max. 500 kg - Spindle no ...

750 pcs Grinding Wheels - Mixed Lot / Large Batch - Various sizes, shapes and materials - The following sizes and quantities as well as many other grinding wheels are available: 45x 40 / 40 / 9 22x 50 / 10 / 10 1x 50 / 25 / 15 12x 50 / 35 / 22 7x 70 / 35 / 14 7x 75 / 10 / 8 34x 100 / 20 / 24 18x 100 / 20 / 25 3x 125 / 13 / 25 3x 125 / 25 / 32 7x 125 / 30 / 32 4x 150 / 50 / 50 14x 175 / 10 / 20 5x 175 / 10 / 32 38x 175 / 100 / 76 85x 175 / 11 / 48 6x 175 / 15 / 20 5x 175 / 30 / 20 1x 175 / 30 / 40 5x 175 / 35 / 20 12x 175 / 60 / 48 1x 175 / 60 / 65 15x 175 / 9 / 48 11x 200 / 10 / 48 16x 200 / 10 / 76 5x 200 / 20 / 20 5x 200 / 20 / 25 4x 200 / 25 / 32 2x 200 / 75 / 48 5x 245 / 30 / 82 144x 250 / 15 / 76 1x 250 / 15 / 82 1x 250 / 20 / 32 1x 250 / 20 / 75 2x 250 / 25 / 50 1x 250 / 30 / 50 2x 250 / 35 / 82 2x 250 / 40 / 38 28x 300 / 10 / 125 1x 30 ...

Special price 2.630,- instead of € 3.090,- excl. VAT - Exact setting of the drilling depth - Suitable for drilling and tapping (optional) - The drilling table is height-adjustable and can be rotated around the column - Made in Sweden Specifications - Drilling capacity: 25 / 28 mm - Quill stroke: 130 mm - Tapping capacity (steel / cast iron): M 16 / M 20 - Spindle holder: MK3 - Spindle speed: 129 - 1498 rpm - Gear stages: 4 - Max. distance spindle/table: 730 mm - Projection: 255 mm - Drilling table size: 500 x 400 mm - Column diameter: 100 mm - Motor power: 0.65 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 1720 x 500 mm - Weight: 185 kg

Doosan PUMA 2600SY - 6-axis CNC turning center - Center width: 760 mm - Circumference Ø: 780 mm - Spindle bore: 86 mm - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 Bar Feeder - Year of construction 2011 Specifications Capacity: - Circumferential Ø over bed: 780 mm - Circumferential Ø over slide: 630 mm - Rec. Rotary Ø: 255 mm - Max. rotary Ø: 376 mm - Max. turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed belt type: 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing Ø: 140 mm - Spindle passage Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Sub-spindle speed (integrated): 6000 rpm - Sub-spindle nose: ASA A2-5 - Front counter-spindle bearing Ø: 90 mm - Sub-spindle passage Ø: 62 mm - Min. counter-spindle indexing angle (C-axis): 0.001° Tool turret: - Number of tool stations: 12 - Tool outer Ø:  ...

Voest DA300-1000 - Universal lathe - 3-jaw lathe chuck Ø 400 mm - 4-jaw face plate Ø 600 mm - Grinding device Ø 200 mm - Multifix - Interchangeable gears - Instruction manual & documents - Year of construction 1975 Specifications Workspace: - Tip height: 300 mm - Circumferential Ø over bed: 620 mm - Circumferential Ø in offset: 800 mm - Circumferential Ø above the face slide: 360 mm - Length of the offset: 407 mm - Center width: 1000 mm - Max. workpiece weight between tips (without steady rest): 1800 kg Main spindle: - Spindle head: 8 DIN 55022 - Spindle bore: 83 mm - Inner cone: Metric 90 - Grit: MK5 Tailstock: - Quill stroke: 180 mm - Jaw Ø: 85 mm - Inner cone of quill: MK5 Grips: - Face plate Ø: 600 mm - Max. chuck Ø: 410 mm Main spindle speeds: - Number of steps: 18 - Range: 14 - 1000 rpm Feeds: - Length feed: 0.086 - 4.866 mm/rev (66)  ...

Urban AP 5000 F - Travelling column milling machine - Heidenhain track control TNC 410 M, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 2 chip drawers - Swivelling clamping device for 4700 mm workpiece length - 10 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Safety bumper - Machine guard pneumatically vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the tensioners have to be partially replaced - Contact cables of the cylin ...

Intos FNGJ40 - Tool Milling Machine Automatic feed in all axes ACU-RITE 3-axis position indicator Hydraulic tool clamping Coolant Setup Workplace lighting Built in 1999 Specifications Workspace: - Horizontal longitudinal movement of the table (axis X): 600 mm - Horizontal transverse movement of the milling head (axis Y): 400 mm - Vertical movement of the table (axis Z): 400 mm Clamping surface of the vertical table: - Length x height: 500 x 320 mm - T-slots number/spacing/size: 5 / 50 mm / 14H8 Fixed angle table clamping surface: - Length x width: 800 x 400 mm - T-slots number/spacing/width: 8 / 50 mm / 14H8 Feed and rapid traverse: - Engine power/speed: 1.5 kW / 940 rpm - Feed stages: 18 - Feed range axis X and Y: 16 - 800 mm/min - Feed range axis Z: 8 - 400 mm/min - Rapid traverse axis X and Y: 2000 mm/min - Rapid traverse axis Z: 1000 mm/min - Maximum fe ...

ID3415 Metso Lokotrack 1415 S year/Baujahr 2015 9320 hours/hours 91 t Mobile impact crusher, opening width crusher: 1540 x 1170 mm, maximum feed size: 1000 mm, with feed hopper with side elevation, vibrating chute, pre-screen with side belt, crusher discharge conveyor belt, 1-deck screening machine 3500 x 1600 mm, conveyor belt under screening machine, stockpile belt, return conveyor belt Chain-mounted impact mill, opening width crusher: 1540 x 1170 mm, maximum feed size: 1000 mm, with feed hopper with side elevation, vibrating trough, pre-screen with side belt, crusher discharge conveyor belt, 1-deck screening machine 3500 x 1600 mm, conveyor belt under screening machine, stockpile belt, return conveyor belt

Delivery rate 4.61 m³/min at 10 bar Delivery rate 5.23 m³/min at 8 bar Operating pressure 10 bar Nominal power 30.0 KW Operating hours 14,279 Load hours 11,148 Compressed air connection G1 1/4 Sound level 69 dB(A) Space requirement L - 1,400 x W - 830 x H - 1,640 mm Weight approx. 850 kg

Machine make / type HELLER / H 8000 Hours: 5800 Year of Make: 2020 Control: Siemens 840D SL Spindle: EPC unit (8,000 1/min, 60 kW, 1146 Nm) Tool clamping system: SK 50 Magazine / Places: Shelf / 265 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, KF 600, IKZ 70 bar, (working area flushing) Working range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additional options / special features: Holder for MSK attachment heads; Wireless probes Receiver (RENISHAW); Fast drill breakage control (SBBK); Interface suction; Windshield blowing device for service doors; Tool coding; Running control Conveyor; Integrated tool & tool Collision monitoring; 3 colors status lamp; Increased Tool weight 35kg; Scraper belt conveyor for Wet machining; coolant temperature controller; Feed force indicator; Tangential control;

Width 72 cm Year of construction 2014 Pallet feeder FP 120 Pallet feeder with Vaculift and Vacubelt MC Control 1st station: 8 fold pockets 72 cm Downstream knife shaft 2nd station: 4 fold pockets 52 cm Downstream knife shaft Shed display partially overhauled - workshop tested - new folding rollers station 1 Machine condition: cleaned and checked Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Machine Vise ATS-125 Jaw width: 125 mm Jaw height: 46 mm Total height: 118 mm Spans: Pos. 1: 0-72 Pos. 2: 70-140 Pos. 3: 135-220 Clamping force : 35kN Weight: 34 kg Mint condition, unused Delivery possible

ILMAKSAN MAKINA duct production line was built in 2018 by the Turkish company İLMAKSAN HAVALANDIRMA MAKİNA İMALAT SAN. TİC. İHT. İHR. LTD. ŞTİ. Rectangular ducts, which are used in the HVAC industry, are manufactured fully automatically. The operator’s involvement is limited only to the selection of the relevant parameters in the HMI operator panel with touch screen display. Full automation of the process allows for a significant reduction in costs and an acceleration in the production of ventilation ducts. The main machine performs a number of operations, such as: – automatic feeding of the material – sheet metal straightening – sheet metal strengthening by making trapezoidal strengthening bends – cutting of the sheet metal to the required length – sheet metal bending The offered ILMAKSAN MAKINA automatic ventilation duct production line is fully complete  ...

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A.. The machine, designed for machining workpieces with a maximum length of 1500 mm, is distinguished by the use of many state-of-the-art technical solutions. It thus meets all, even the most intensive challenges of modern business. The ADIRA BB3515 CNC press brake is equipped with a powerful electric drive , developed in Bluedrive technology. Compared to a standard hydraulic system, this drive is free of filters, seals and hydraulic oil. As a result, the machine is much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. Furthermore, ADIRA’s patented HEXA-C design concept minimis ...

TRUMPF TruMatic 1000 R punching machine was built in Germany by TRUMPF Werkzeugmaschinen GmbH+Co. KG. The machine is used for precision machining of thin sheet metal with a maximum thickness of 6.4 mm. Its technical solutions, combined with reliable components, offer the highest machining performance, even during the most intensive challenges. All machining processes, i.e. punching, marking, stamping and cutting, are performed by a work head operating at a maximum force of 16.5 tonnes. It is accompanied by an linear tool magazine, which provides storage for a large number of tools of all sizes and types in a rotary holder. This holder, in turn, ensures exact matching of punch and die and rotation of all tools to any angle. On the machine’s sturdy C” shaped design, a work table with integrated balls to facilitate the loading and unloading of workpieces. The table also has clamps ...

CITIZEN M32 V CNC sliding head lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine is used for precision 8-axis machining of workpieces of even the most complex geometries. All machining processes, i.e. precise drilling, threading and turning are performed by 2 reliable spindles and tools taken from 3 capacious tool stations. What’s more, the specially designed bed with high thermal stability perfectly reduces the influence of heat, increasing the service life of all components and cutting tools. The offer also includes a wide range of equipment that significantly extends the machine’s machining capabilities and guarantees excellent repeatability of the manufactured parts. This includes e.g. an advanced CNC controller with many useful functions, such as self-diagnosis and program backup. All this makes the CITIZEN M32V swiss-type lathe the best choice for many  ...

3D laser cutting machine TRUMPF TruLaser Cell 7040 was built in 2010 in Germany by TRUMPF Laser- und Systemtechnik GmbH. The machine, which is designed for precision laser cutting and laser welding, is an excellent choice for businesses operating in the broad field of automotive technology. Two- and three-dimensional workpieces, profiles and tubes are machined inside an enclosed workspace with a large table and 5-axis workhead. The 5 kW laser beam, generated by a reliable source with the highest energy efficiency, provides completely new possibilities for shaping the geometry of the workpiece. In addition to standard cutting and welding, it allows, for example, the creation of through-holes and the trimming of external contours. As a result, the TruLaser Cell 7040 3D laser cutting machine is also an excellent alternative to sophisticated milling systems. The operator’s daily work ...

OKUMA MA-50 HB CNC horizontal machining center was built in 2000 by the Japanese corporation OKUMA. The machine, designed for advanced machining of workpieces with a maximum weight of 800 kg, is distinguished by its high reliability, efficiency and precision. The machining process is performed fully automatically by means of a high-speed spindle and cutting tools taken from a 40-position magazine. What’s more, the automatic pallet exchange system allows for simultaneous loading and unloading of workpieces during the machining process, reducing machine downtime to a minimum. The MA-50 HB CNC machining center is offered with extensive equipment, including among others a rotary table and an advanced CNC control with an intuitive interface. The total weight of the machine is 21000 kg. Technical specifications of the OKUMA MA-50 HB CNC milling machine - feed in the X/Y/Z axis: 700/800/7 ...

TBI TC 200-65 MC CNC turning center was built in 2015 in Taiwan by TBI Technology Ltd. The machine, distinguished by its high reliability and extensive equipment, was created as an effective answer to the needs of even the most demanding customers. Workpieces with a maximum diameter of 500 mm are machined inside a large, fully illuminated workspace using a powerful spindle and tools taken from a 12-position turret. Daily work, in turn, is facilitated by a FANUC CNC control with the innovative MANUAL GUIDE workshop programming tool, which reduces the time between drawing up the technical drawing and the actual production of the workpiece. The offer also includes, among others, a hydraulic tailstock and an automatic tool measuring probe. The TBI TC 200/65 MC metal lathe weighs 3200 kg. Technical specifications of the TBI TC 200/65 MC CNC lathe - maximum turning diameter: 210 mm - maxi ...

DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz  ...

DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...

KT7 CNC KVPG 150-300 VOLCUT plasma cutting machine was built in 2020. This extremely powerful machine is the perfect choice for precision cutting of workpieces with a maximum thickness of 50 mm. This is all due to the use of a number of innovative technologies that significantly improve the production processes with maximum ease of operation. The sheets are machined on a water or other coolant-filled water table by means of two torches (an oxygen torch and a plasma torch). Each torch is equipped with a special TSC (Torch Sensor Control) double-basing system, which protects them from accidental damage. Machining under water in turn eliminates the need for filtration systems, as well as undertaking further secondary processes, i.e. grinding. Furthermore, in order to prevent rust, the KVPG 150-300 VOLCUT plasma-oxygen cutting machine has a fully galvanised design. The VOLCUT 150-300 p ...

GILDEMEISTER MF twin 65 CNC lathe was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. This extremely efficient machine is used for precision machining of workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large work space, by means of two spindles and tools taken from two 12-position turrets. This solution maximises production efficiency by enabling simultaneous workpiece machining on both spindles. What’s more, any vibration or oscillation is eliminated by a rigid bed, guaranteeing high process stability even during the most intense challenges. The MF twin 65 CNC turning center, including the control cabinet, weighs approximately 6500 kg. Technical specifications of the GILDEMEISTER MF twin 65 CNC dual-spindle lathe General data - number of axes: 4 (X1,X2,Z1,Z2) - swing over bed: 240 mm - maximum turning diameter: 200 mm - ma ...

KOVOSVIT MAS S80i CNC turning center was built by KOVOSVIT MAS a.s. in the Czech Republic. This extremely powerful machine is used for precision hole drilling, threading and turning of cylindrical, conical and spherical surfaces. The offer also includes a wide range of equipment in the form of components from renowned brands, which guarantee excellent repeatability of the manufactured parts over many years of intensive operation. These include, among others, a new tool measuring probe, a hydraulic tailstock and a HEIDENHAIN intelligent CNC control. All this makes the S80i CNC CNC lathe the perfect choice for both unit and small batch production. The total weight of the machine is 6700 kg. Technical specifications of the KOVOSVIT MAS S80i universal lathe - maximum turning diameter above the bed: 680 mm - maximum turning diameter over the slide: 430 mm - maximum bar diameter: 80 mm  ...

FANUC Arc Mate 100iC robotic welding station was built in 2019. The system configured for fully automatic MIG/MAG welding of workpieces is the perfect solution for the production of e.g. electrical cabinets, metal structures or agricultural equipment. The machining process is performed by a powerful industrial robot which, in combination with a rotary table, enables the machining of workpieces with even the most complex shapes. All the components of the workstation are integrated inside a single structure, making it easy to install or reposition. The MOTOFIL ROBOTICS MONOBLOC MCT1110 robotic welding station consists of the following parts: – robot arm: FANUC Arc Mate 100iC – controller: FANUC SYSTEM R-30iB – welding source: KEMPPI A7 MIG Power Source 450 – welding positioner – wire feeder: KEMPPI A7 MIG Wire Feeder 25-LH-EUR – ABICOR BINZEL torch cleaning device with ...

RQ-ZH-120W automatic cartoning machine was built in 2022 in China by Rich Packing Machinery Co., Ltd. The machine is used for the automatic packaging of blister packs, sachets, tubes and bottles into cardboard boxes with a maximum basis weight of 350 g/m2. This task involves a number of sophisticated drives that are responsible, among others, for box forming, product insertion and box closing. The high degree of automation allows products to be packed into cartons very quickly, increasing work efficiency. The RQ-ZH 120W packaging line weighs 1400 kg. Technical specifications of the RQ-ZH-120W cartoner - HMI panel SIEMENS SMART LINE TOUCH with PLC controller - packing speed: 30-120 boxes/min - box basis weight: 250-350 g/m2 - maximum box dimensions (L x W x H): 180 x 85 x 50 mm - minimum box dimensions (L x W x H): 70 x 30 x 14 mm - maximum dimensions of the contents of the box ( ...

GERDA HYDOMAT PAWN 100 automatic press was built by GERDA HYDOMAT S.A. in Poland in 2001. The machine, with a high press force of 100 tonnes, is dedicated to the mass production of precision steel parts. All machining processes, i.e. precise stamping and threading of the workpieces, are performed fully automatically. The sheet metal feeder accurately feeds the material into the workspace, where the slider and reliable threading head are located. The design, which is made from the highest quality raw materials, in turn maintains the highest stability during even the most intensive challenges. The GERDA HYDOMAT hydraulic press weighs 5200 kg. Technical specifications of the GERDA HYDOMAT PAWN 100 press - press force: 100 t (1000 kN) - work table dimensions (L x W): 700 x 320 mm - height of working space: 250 mm - slider stroke: 0-70 mm - number of slider strokes: 10-40/min - numbe ...

FEHLMANN PICOMAX 60-M CNC vertical machining center was built in 2006 in Switzerland by FEHLMANN AG. The machine is designed for even the most intensive machining of workpieces with a maximum weight of 300 kg. The machining process is performed inside a large workspace, equipped with, among others, a reliable high-speed spindle and a 24-position tool magazine. Daily work, on the other hand, is facilitated by the installed HEIDENHAIN CNC control, in which advanced machining programmes are created in just a few steps. The PICOMAX 60 M CNC machining center will satisfy even the most demanding customers thanks to its excellent performance and high machining precision. The total weight of the machine is 3350 kg. Technical specifications of the FEHLMANN PICOMAX 60-M CNC milling machine - CNC controller: HEIDENHAIN iTNC 530 - feed in the X/Y/Z axis: 505/355/610 mm - feed rate in the X,Y,Z ...

WWM TS 560/8-1 wire drawing machine was built in 2014 in Italy by WWM Technology Srl (now EJP Italmec Sp. z o.o.). The machine is used in the process of reducing the diameter of various types of wire by pulling it through a series of rollers. Once reduced to the appropriate diameter, the wire is confectioned directly onto a carousel or stand. The wire drawing line consists of the following machines: 1. WWM TS 560/8-1 wire drawing machine 2. WWM SV5 vertical static wire pay-off 3. WWM DSM 01 mechanical descaler 4. WWM AF 1000 wire coiler Wire feeding precision is ensured by the WWM wire pay-off, which consists of two tilting drums and a central column. It enables easy loading of material coils weighing a maximum of 3000 kg each, without stopping the drawing machine. During threading, the sheave and basket are lowered by a hoist with AC motor. The scale on the entire surface of t ...

BIGLIA SMART TURN B1200 CNC automatic lathe was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, dedicated to the precise, multi-axis machining of workpieces with a maximum diameter of 580 mm, was created as an effective answer to the daily challenges of modern business. For this purpose, it features modern components with excellent technical characteristics inside a large work space, such as two spindles (main spindle and sub-spindle) and a 40-position tool magazine. The high-speed operation of the tool magazine further significantly speeds up production time and reduces machine downtime to a minimum. The SMART TURN B1200 S CNC turning center is offered with a wide range of equipment, including a bar feeder, Y-axis and FANUC intelligent CNC control. The total weight of the machine is 7000 kg. Technical specifications of the BIGLIA SMART TURN B1200 CNC lathe Gene ...

ENGEL VC 500/130 TECH injection moulding machine was built in 2002 in Austria by ENGEL AUSTRIA GmbH. This highly efficient machine is used for the economic production of plastic parts of various colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 130 tonnes, guarantee high repeatability and quality of the manufactured parts. The offer also includes a robot for collecting finished products from the workspace. The VICTORY 500/130 TECH injection moulding machine weighs 9100 kg. Technical specifications of the ENGEL VC 500/130 TECH injection moulding machine - CNC control: ENGEL CC100 - maximum mould clamping force: 130 t ...

METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...

DOOSAN DNM 4500 CNC machining center was built in 2022 (purchased as new in 2023) in South Korea by DN SOLUTIONS. The machine, designed for precision machining of workpieces with a maximum weight of 600 kg, is equipped with a number of reliable components that ensure uninterrupted operation for many years of intensive production. The machining processes, i.e. drilling, threading and milling, are performed inside a large work area by means of cutting tools and a powerful spindle with direct drive. All this is complemented by the intelligent SIEMENS CNC controller, in which advanced machining programmes are created in just a few steps. Throughout its entire service life, the machine has worked for just 83 hours. The DOOSAN milling center weighs 5000 kg. Technical specifications of the DOOSAN DNM 4500 CNC milling machine - CNC controller: SIEMENS SINUMERIK 828D - feed in the X/Y/Z axis ...

GARBOLI LPC 500 tube polishing machine was built in 2021 in Italy by BRUSA & GARBOLI. The machine is designed for the precision surface treatment of straight and bent tubes made of, among others, stainless steel and aluminium. The specially designed system of dry grinding, consisting of two opposing abrasive belts, ensures an even surface finish without any distortion, even on larger tubes. On the other hand, daily operation of the machine is facilitated by an intuitive control panel designed for precise setting of the working parameters. The BRUSA & GARBOLI tube grinding machine weighs 455 kg. Technical specifications of the GARBOLI LPC 500 orbital tube polishing machine - maximum tube diameter: 203 mm - minimum tube diameter: 10 mm - minimum tube radius: 225 mm - abrasive belt size (L x W): 1500 x 90 mm - control panel - main motor power: 9.7 kW - power supply: 400 V; 50 Hz  ...

KITAMURA MYCENTER HX630G CNC machining center was built in 2017 by the Japanese brand Kitamura Machinery Co., Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 1500 kg, was created as a response to the needs of modern business. In order to meet all production requirements, state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The machining process is performed fully automatically inside a large working area, which includes a capacious tool magazine and a reliable spindle with a special DCS (Dual Contact Spindle) system. This system ensures optimum spindle rigidity through simultaneous contact between the taper and the flange. Furthermore, the automatic pallet exchange system allows workpieces to be loaded and unloaded simultaneo ...

MEP COBRA 350 AX automatic circular sawing machine was built in Italy by MEP SpA. The machine, designed for cutting workpieces at an angle of 90° and 45°, is distinguished by its high productivity and precision. The machining process is performed automatically or manually by means of a cutting disc with a diameter of 350 mm. The cutting disc is continuously lubricated and cooled to increase operational reliability. The MEP COBRA 350 NC AX circular sawing machine weighs approximately 560 kg. It is possible to purchase the machine together with a hydropneumatic press for punching different diameters and shapes. The price for such a set is EUR 6250 net. Technical specifications of the MEP COBRA 350 AX metal circular sawing machine - cutting angle: 90°; 45° - cutting capacity (90°, circle): 105 mm - cutting capacity (90°, rectangular section): 180×70 mm - cutting capacity (4 ...