used 24 for sale

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Sanyo MIR-253 Refrigerated Incubator -10°C – +50°C SANYO's MIR series refrigerated incubators are considered exceptional units suitable for a wide range of applications as they offer a temperature range of -10°C to 50°C. In the pursuit of temperature precision and improved usability. These incubators contain an 8-bit microcomputer and control the heater and compressor within a precise range of ±0.2 °C and ±1 °C, respectively. In addition, MIR-153 can be applied to a variety of experimental patterns using a 3-step microcomputer program. This refrigerated incubator is designed to meet a wide range of advanced experimental needs, ranging from microorganism cultures and plant germination tests to various constant temperature experiments. The MIR-253 has the following features: Microprocessor control with feedforward function Energy savings CFC-free, on-site foamed ...

Year of Make: 2009 Clamping force: 400 tons Screw diameter: 90 mm Shot Volume: 2481 cm³ Injection pressure increased: 1599 bar incl. removal robot Engel ERC 34 Good condition

Straight and cut machine Wafios R31 Diameter: 1-5mm – 7mm MY: 1993 – working condition Machine Number: 26106224 Extension length: 2m or 6m available Pay-Off: not available, we can offer separate for 3t. Mechanically refurbished Electrical checked Machine is in working condition

Weiler Condor 81 - Universal lathe - K+C 3-axis position indicator - Bison 3204-160 3-jaw lathe chuck - Collet chuck + various collets - Feed protection - Multifix - Coolant device - Swarf back wall - Full service carried out (oil change, belt change, etc.) - Year of construction 1984 Specifications - Circumferential Ø over bed: 330 mm - Circulating Ø over face slide: 185 mm - Turning length between tips: 750 mm - Turning length between tips with covered guide and pull spindle: 650 mm - Tip height: 165 mm - Bed width: 240 mm Fulcrum shaft: - Spindle head DIN 55027: size 5 - or similar to DIN 55029 (Camlock D1): size 4 - Spindle Ø in the front bearing: 70 mm - Spindle passage: 40 mm - Inner cone according to DIN 228: MK5 - Centering tip according to DIN 806: MK3 - Face plate Ø max.: 280 mm - Chuck Ø normal: 160 mm - Chuck Ø maximum: 200 mm Tool slides: ...

59 Pcs. Machine Feet / 7 Models - for leveling machines of all kinds - 23x 250/150/90 mm - 18x 200/120/100 mm - 6x 250/150/100 mm - 3x 240/100/80 mm - 4x 150/150/50 mm - 2x 250/115/70 mm - 3x 200/200/60 mm

Special price € 4,100 instead of 4,930 excl. VAT Solberga SE2030 - Gear drilling machine (new) Recording: MK3 Capacity: 30 mm - The drill head can be swivelled 360° around the column and is height-adjustable. - The gearbox is built with our traditional and tested technology for the highest possible torque. Helical gears in combination of steel and reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. - The spindle is made of steel and ensures optimal concentricity of the tool thanks to its adjustable tapered roller or ball bearing. The machine has an adjustable spindle return spring. This allows the restoring force to be adapted to the weight of the tool. - Automatic feed (M model) - When the preset drilling depth is reached, the spindle returns to its original positio ...

Urban AP 6500 F - Travelling column milling machine - Heidenhain iTNC 530 path control, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 6 chip drawers - Swivelling clamping device for 6200 mm workpiece length - 12 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Security fence - Safety bumper - Safety light curtains - Machine guard pneumatically vertical opening Specifications - Travel X/Y/Z: 6500 / 155 / 110 mm - Working range X/Y/Z with swivel device: 6200 / 155 / 110 mm - Space requirement with security fen ...

Deckel FP3A 2820 - CNC Milling Machine - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamp - Automatic speed manual transmission - Automatic clamping in X/Y/Z axes - Automatic central lubrication - Coolant device - Direct displacement measurement - Collision protection clutch in Z/Y axes - Built in 1987 Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke vertical: 80 mm Cpovd9Rv - Vertical milling head can be moved to the headrest: 150 mm Main Drive: - Motor: pole-switchable three-phase brake motor and manual transmission with clockwise/counterclockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Level Jump: 1.25 - Tool holder: SK40 (M16) - Tool  ...

MTcut UE110-5A - 5-axis machining center - Heidenhain iTNC 530 SmarT.NC HSCI controller - 40-fold tool changer - Rotary table Ø 610 mm - Oil mist extraction - Hydraulic vice incl. elevation - Center clamp - Tool holders -Tool cabinet -Milling cutter -Magnetic disk - Solid CAM with iMachining, with post-processor - Halmer optical presetting device - Spindle A 3182 hrs - Year of construction 2016 Specifications Field of work: - X-axis travel: 1100 mm - Y-axis travel: 610 mm - Z-axis travel: 610 mm - Travel B-axis: -30 / +120 ° - Travel C-axis: 0.001 x 360 ° - Rapid traverse X/Y/Z: 36 / 36 / 24 m/min - Feed: 1 - 7500 mm/min - Positioning accuracy: ± 0.005 mm - Repeatability: ± 0.003 mm - Guides X/Y/Z: rollers 35 / 35 / 45 mm Roundtable: - Rotary table Ø: 610 mm - Speed: 50 rpm - Positioning accuracy: 15 - Workpiece weight: max. 500 kg - Spindle no ...

750 pcs Grinding Wheels - Mixed Lot / Large Batch - Various sizes, shapes and materials - The following sizes and quantities as well as many other grinding wheels are available: 45x 40 / 40 / 9 22x 50 / 10 / 10 1x 50 / 25 / 15 12x 50 / 35 / 22 7x 70 / 35 / 14 7x 75 / 10 / 8 34x 100 / 20 / 24 18x 100 / 20 / 25 3x 125 / 13 / 25 3x 125 / 25 / 32 7x 125 / 30 / 32 4x 150 / 50 / 50 14x 175 / 10 / 20 5x 175 / 10 / 32 38x 175 / 100 / 76 85x 175 / 11 / 48 6x 175 / 15 / 20 5x 175 / 30 / 20 1x 175 / 30 / 40 5x 175 / 35 / 20 12x 175 / 60 / 48 1x 175 / 60 / 65 15x 175 / 9 / 48 11x 200 / 10 / 48 16x 200 / 10 / 76 5x 200 / 20 / 20 5x 200 / 20 / 25 4x 200 / 25 / 32 2x 200 / 75 / 48 5x 245 / 30 / 82 144x 250 / 15 / 76 1x 250 / 15 / 82 1x 250 / 20 / 32 1x 250 / 20 / 75 2x 250 / 25 / 50 1x 250 / 30 / 50 2x 250 / 35 / 82 2x 250 / 40 / 38 28x 300 / 10 / 125 1x 30 ...

ESAB Numorex NXB 6000 - Plasma Cutting Machine - Year of construction 2009 Specifications - Cutting width: 3200 mm - Cutting length: 16000 mm - Max. cutting thickness of mild steel: 200 mm - Raceway height: 500 mm - Raceway length: 25000 mm - Cutting table height: 700 mm - Max. machine speed: 24000 mm/min - Max. number of individual burners: 1x P-VBA / 1x A / 1x A-VBA - Fuel gas: acetylene - Operating voltage: 3x 400 V - Power consumption: 9 kVA - Machine dimensions WxHxD: approx. 6900 x 4000 x 4500 mm - Machine weight: approx. 10000 kg

Urban AP 5000 F - Travelling column milling machine - Heidenhain track control TNC 410 M, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 2 chip drawers - Swivelling clamping device for 4700 mm workpiece length - 10 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Safety bumper - Machine guard pneumatically vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the tensioners have to be partially replaced - Contact cables of the cylin ...

Ho Chun U-1000B - Universal Bed Milling Machine - 3-axis position indicator - Universal milling head - Hardened and ground guideways - Infinitely variable feeds - Stepless speeds with 2 levels - Horizontal milling device - Hydraulic tool feed - Drive 11 kW - Automatic central lubrication - Coolant device - Table covering - CE certification - Incl. operating instructions and documents - Year of construction 2001 - Complete service carried out Specifications Workbench: - Table clamping surface: 1500 x 360 mm - Table load: 800 kg Travel: - X-axis longitudinal: 1000 mm - Y-axis transverse: 540 mm - Z-axis vertical: 430 mm Workspace: - Distance spindle nose / table: 50 - 480 mm - Distance between spindle center / stand: 350 mm Feeds: - Number of feeds: infinitely variable - Feed longitudinal / transverse: 16 - 1200 mm/min - Feed rate: 8 - 450 mm/min - Rapi ...

Intos FNGJ40 - Tool Milling Machine Automatic feed in all axes ACU-RITE 3-axis position indicator Hydraulic tool clamping Coolant Setup Workplace lighting Built in 1999 Specifications Workspace: - Horizontal longitudinal movement of the table (axis X): 600 mm - Horizontal transverse movement of the milling head (axis Y): 400 mm - Vertical movement of the table (axis Z): 400 mm Clamping surface of the vertical table: - Length x height: 500 x 320 mm - T-slots number/spacing/size: 5 / 50 mm / 14H8 Fixed angle table clamping surface: - Length x width: 800 x 400 mm - T-slots number/spacing/width: 8 / 50 mm / 14H8 Feed and rapid traverse: - Engine power/speed: 1.5 kW / 940 rpm - Feed stages: 18 - Feed range axis X and Y: 16 - 800 mm/min - Feed range axis Z: 8 - 400 mm/min - Rapid traverse axis X and Y: 2000 mm/min - Rapid traverse axis Z: 1000 mm/min - Maximum fe ...

year: 2015 incl. DWS 80 water softener The DWS 80 system is a water softening element that was directly connected to the system so that softened water can be circulated. RZ is composed as follows: R = radial fan (air is forced upwards by pressure) Z = Additional options, as follows Own water tank Evaporation pump Operating pump Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC Dimensions of the system: 1,000 x 1,630 x 2,000 mm Weight of the system: 480 kg Good condition

Alternator NEWAGE Stamford suitable for Jenbacher J320 X 5 Pieces Bearing Type: 6319 C3 / 6228 C3 Grease Type: Klüber ASONIC GHY72 Speed / Frequency: 1500-1800 rpm / 50-60 Hz Fully serviced, 0 hours since last maintenance, painted and megger tested. In excellent conditioin, ready for operation. Photos attached. Cogeneración Técnica Energética info@ctenergetica.com +34 674945249

DMG DMC 63V Machining Center Year of construction 1998 Siemens 810D 24 Way Tool Changer Working area 630 x 500 x 500 mm Feed rate 1-10000 mm/min Rapid traverses 30000 m/min Tool holder ISO 40, Spindle speed 1 - 8000 rpm Coolant Setup approx. 4200kg Accessories: Handwheel Documentary The DMC 63V machining center is in good condition and can be viewed under power.

Machine vise ATS NC-200VH Year of construction 2024 Jaw width: 200 mm Jaw height: 63 mm Total height: 173 mm Total length: 700 mm Max. internal wingspan: 330 mm Max. wingspan outside:540 mm with pull-down function Clamping force: 45kN Weight: 80 kg Delivery possible Price per piece

Machine vise ATS NC-160VH Year of construction 2024 Jaw width: 160 mm Jaw height: 58 mm Max. internal wingspan: 300 mm Max. wingspan outside:480 mm with pull-down function Clamping force: 40kN Weight: 60 kg Delivery possible

CMA TRD 38 CNC 3000 CNC drilling machine was built in 2015 in Spain by COMERCIAL DE MAQUINARIA ALZIRA S.L. The machine, designed for drilling precision holes and threading, is an excellent choice for companies specialising, among others, in the construction of machinery, the production of steel structures or the production of other industrial installations. The machine is characterised by, among others, a movable, precise work head and an extremely stable design, made of sections with thickened and reinforced walls. The machining process is performed in three axes (X,Y,Z). In order to achieve excellent dynamic and repeatable feeds, movement in all axes takes place on hardened, high-quality linear guides. All running components are also continuously and fully automatically lubricated, ensuring uninterrupted machine operation for many years of use. The CMA TRD 38 CNC beam drilling machi ...

TSUGAMI B0205E CNC sliding head lathe was built in 2011 in Japan by TSUGAMI CORP. The machine, designed for precision machining of workpieces with complex geometries, is the perfect solution for industries i.e. automotive or aerospace. To ensure maximum performance even during the most intensive challenges, it has been equipped with a range of reliable components of excellent technical parameters. Inside the large work space, there is among others a 21-position tool magazine and two powerful spindles, which significantly speed up the overall production time. All this is complemented by an intelligent FANUC CNC control with an intuitive interface. The TSUGAMI B0205E-II swiss-type lathe weighs 1700 kg. Technical specifications of the TSUGAMI B0205E CNC turning center General data - number of axes: 5 (X1,X2,Y1,Z1,Z2) - rapid traverse in the X1 axis: 24 m/min - rapid traverse in the X ...

XSA100GFQ 100 kW gas generator was built in 2023 in China by Xinsheng An Power Technology (Shandong) Co., Ltd. This unit is indispensable in the event of power cuts or in conditions where there is no electricity supply. The extremely powerful 100 kW motor converts mechanical energy into electrical energy, ensuring uninterrupted operation of machinery and industrial systems. The engine is powered by LPG gas, which significantly extends the life of the engine and is also much more environmentally friendly. In addition, all other components of the unit meet the most important global quality and emission standards. The 100 kW generator weighs 2860 kg. The XSA100GFQ gas generator set consists of the following parts: – WP6D132E300NG engine – XSA 100 alternator – HGM6110 control system with remote control module – charger – battery Technical specifications of the XSA100GFQ  ...

BYSTRONIC Byspeed 4020 laser cutting machine was built in 2007 by the Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a maximum power of 4.4 kW, which is generated by a reliable laser source of the highest energy efficiency. In turn, the operator’s daily work is facilitated by an intelligent CNC control with many useful functions. All this makes the offered BYSTRONIC laser the perfect choice for any industrial plant. The last inspection of the machine was done in 2024. The Byspeed 4020 laser cutting machine weighs 19000 kg. Technical specifications of the BYSTRONIC Byspeed 4020 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - laser type: CO2  ...

OKUMA MA-50 HB CNC horizontal machining center was built in 2000 by the Japanese corporation OKUMA. The machine, designed for advanced machining of workpieces with a maximum weight of 800 kg, is distinguished by its high reliability, efficiency and precision. The machining process is performed fully automatically by means of a high-speed spindle and cutting tools taken from a 40-position magazine. What’s more, the automatic pallet exchange system allows for simultaneous loading and unloading of workpieces during the machining process, reducing machine downtime to a minimum. The MA-50 HB CNC machining center is offered with extensive equipment, including among others a rotary table and an advanced CNC control with an intuitive interface. The total weight of the machine is 21000 kg. Technical specifications of the OKUMA MA-50 HB CNC milling machine - feed in the X/Y/Z axis: 700/800/7 ...

InfoTEC 6205 PRO 5 AXIS profile machining center was built in 2019 in Poland by 4CNC Sp. z o.o. The machine, designed for precision milling, drilling and cutting of workpieces made from a wide range of materials, is an excellent choice for companies with a diverse production profile. Workpieces are machined using a moveable machining station, which moves over an extended work area. This solution significantly increases production efficiency, thanks to the possibility of machining more than one workpiece at the same time. The InfoTEC PRO-X 5 AXIS aluminium profile machining center is offered with a wide range of equipment, including e.g. an advanced CNC controller, programs that facilitate daily machine operation and PANASONIC light curtains. The total weight of the machine is approximately 5800 kg. Technical specifications of the InfoTEC 6205 PRO 5 AXIS beam drill line - number of ax ...

GILDEMEISTER MF twin 65 CNC lathe was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. This extremely efficient machine is used for precision machining of workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large work space, by means of two spindles and tools taken from two 12-position turrets. This solution maximises production efficiency by enabling simultaneous workpiece machining on both spindles. What’s more, any vibration or oscillation is eliminated by a rigid bed, guaranteeing high process stability even during the most intense challenges. The MF twin 65 CNC turning center, including the control cabinet, weighs approximately 6500 kg. Technical specifications of the GILDEMEISTER MF twin 65 CNC dual-spindle lathe General data - number of axes: 4 (X1,X2,Z1,Z2) - swing over bed: 240 mm - maximum turning diameter: 200 mm - ma ...

SERON 1330 STANDARD CNC router was built in 2020 in Poland by SERON Sp. z o.o. Sp.k. This modern and cost-effective solution for companies with diverse production profiles is suitable for machining a wide range of materials, i.e. aluminium, plastics and wood. The machining process is performed on a large vacuum table using an electro-spindle rotating at a maximum speed of 24000 revolutions per minute. All axes are driven by a powerful ORMON brand servo motor in order to achieve excellent dynamic movements combined with high working speeds. The heavily ribbed construction made of high-quality welded steel further ensures many years of stability and dimensional precision of the machine. The SERON STANDARD CNC milling machine is offered with extensive equipment, including an indexable 4th axis, CAD/CAM software and a vacuum pump. Technical specifications of the SERON 1330 STANDARD millin ...

KOVOSVIT MAS S80i CNC turning center was built by KOVOSVIT MAS a.s. in the Czech Republic. This extremely powerful machine is used for precision hole drilling, threading and turning of cylindrical, conical and spherical surfaces. The offer also includes a wide range of equipment in the form of components from renowned brands, which guarantee excellent repeatability of the manufactured parts over many years of intensive operation. These include, among others, a new tool measuring probe, a hydraulic tailstock and a HEIDENHAIN intelligent CNC control. All this makes the S80i CNC CNC lathe the perfect choice for both unit and small batch production. The total weight of the machine is 6700 kg. Technical specifications of the KOVOSVIT MAS S80i universal lathe - maximum turning diameter above the bed: 680 mm - maximum turning diameter over the slide: 430 mm - maximum bar diameter: 80 mm  ...

GERDA HYDOMAT PAWN 100 automatic press was built by GERDA HYDOMAT S.A. in Poland in 2001. The machine, with a high press force of 100 tonnes, is dedicated to the mass production of precision steel parts. All machining processes, i.e. precise stamping and threading of the workpieces, are performed fully automatically. The sheet metal feeder accurately feeds the material into the workspace, where the slider and reliable threading head are located. The design, which is made from the highest quality raw materials, in turn maintains the highest stability during even the most intensive challenges. The GERDA HYDOMAT hydraulic press weighs 5200 kg. Technical specifications of the GERDA HYDOMAT PAWN 100 press - press force: 100 t (1000 kN) - work table dimensions (L x W): 700 x 320 mm - height of working space: 250 mm - slider stroke: 0-70 mm - number of slider strokes: 10-40/min - numbe ...

FEHLMANN PICOMAX 60-M CNC vertical machining center was built in 2006 in Switzerland by FEHLMANN AG. The machine is designed for even the most intensive machining of workpieces with a maximum weight of 300 kg. The machining process is performed inside a large workspace, equipped with, among others, a reliable high-speed spindle and a 24-position tool magazine. Daily work, on the other hand, is facilitated by the installed HEIDENHAIN CNC control, in which advanced machining programmes are created in just a few steps. The PICOMAX 60 M CNC machining center will satisfy even the most demanding customers thanks to its excellent performance and high machining precision. The total weight of the machine is 3350 kg. Technical specifications of the FEHLMANN PICOMAX 60-M CNC milling machine - CNC controller: HEIDENHAIN iTNC 530 - feed in the X/Y/Z axis: 505/355/610 mm - feed rate in the X,Y,Z ...

GILDEMEISTER TWIN 65 CNC automatic lathe was built in 2005 in Germany by GILDEMEISTER Drehmaschinen GmbH. The machine is used for precise, multi-axis machining of workpieces with complex geometries. To increase overall production efficiency, a combination of two spindles and two 12-position turrets with excellent technical specifications are used inside the large working area. Both spindles feature a C-axis with a high indexing accuracy of ± 0.002 mm, which facilitates complex machining operations that require precise positioning of the workpiece. All this is complemented by an intelligent SIEMENS CNC control with an intuitive interface. The GILDEMEISTER CNC turning center weighs 10000 kg. Technical specifications of the GILDEMEISTER TWIN 65 CNC lathe General data - number of axes: 8 (X1, X2, X3, Y1, B, Z1, Z2, Z3) - feed in the X1/X2/X3 axis: 300/180/175 mm - feed in the Y1/B ax ...

BIGLIA SMART TURN B1200 CNC automatic lathe was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, dedicated to the precise, multi-axis machining of workpieces with a maximum diameter of 580 mm, was created as an effective answer to the daily challenges of modern business. For this purpose, it features modern components with excellent technical characteristics inside a large work space, such as two spindles (main spindle and sub-spindle) and a 40-position tool magazine. The high-speed operation of the tool magazine further significantly speeds up production time and reduces machine downtime to a minimum. The SMART TURN B1200 S CNC turning center is offered with a wide range of equipment, including a bar feeder, Y-axis and FANUC intelligent CNC control. The total weight of the machine is 7000 kg. Technical specifications of the BIGLIA SMART TURN B1200 CNC lathe Gene ...

GABELLA MACCHINE slitting line was built around 1990 in Italy by GABELLA MACCHINE S.p.A.. The machine enables precise cutting of steel and aluminium sheets into evenly sized strips. For this task, cutting rollers with special roller knives are used, which guarantee the highest cutting precision and optimum utilisation of the raw material. The finished strips of material are wound onto coils ready for further machining. The slitting line is offered with a set of new roller knives and reconditioned ejector rings. The total weight of the machine is about 7000 kg. Technical specifications of the GABELLA MACCHINE coil slitting line - material type: stainless steel, galvanised steel, aluminium, copper, etc. - sheet metal thickness (stainless steel): 0.2-1 mm - sheet metal thickness (aluminium): 0.2-3 mm - maximum cutting width: 530 mm - minimum cutting width: 10 mm - maximum coil weig ...

CINCINNATI ARROW 1250 CNC vertical machining center was built in 2001 in the United Kingdom by CINCINNATI MACHINE U.K. LIMITED. The machine, distinguished by its high reliability, productivity and precision, is used for the economic machining of workpieces. The machining process is performed inside a large work space, equipped with, among others, a 21-position tool magazine and a high-speed spindle. Its high-quality design eliminates any vibrations generated during milling, guaranteeing the highest possible stability during even the most intensive challenges. The offered CINCINNATI ARROW 2 1250 CNC machining center has undergone regular maintenance and servicing. The machine is after an spindle overhaul and the replacement of guides and screws in the X and Y axes. The total weight of the machine is 6000 kg. Technical specifications of the CINCINNATI ARROW 1250 CNC milling machine - C ...

METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...

OKUMA MA-600HII CNC machining center was built in 2012 by the Japanese brand OKUMA Corporation. This highly efficient machine is used for advanced workpiece machining in 4 axes. The machining process is performed fully automatically inside a large working area by means of precision cutting tools and a reliable high-speed spindle. The automatic pallet changing system allows workpieces to be loaded and unloaded simultaneously during machining, reducing machine downtime to a minimum. The extensive equipment also includes, among others, a capacious tool magazine and an intelligent CNC controller with an intuitive interface. The MA-600HII CNC horizontal machining center weighs 24500 kg. Technical specifications of the OKUMA MA-600HII CNC milling machine - CNC controller: OSP-P300MA - number of axes: 4 (X,Y,Z,B) - feed in the X/Y/Z axis: 1000/900/1000 mm - rapid traverse in the X,Y,Z ax ...

MATEC 30 HV CNC machining center was built in 2001 in Germany by Matec Maschinenbau GmbH. The machine, designed for precision machining of oversized workpieces, is equipped with a number of reliable components with excellent specifications. This includes a tilting work head, a 24-position tool magazine and a chip extraction unit. All this is complemented by the intelligent BOSCH CNC control, in which advanced machining programmes are created in just a few steps. The MATEC CNC vertical machining center weighs approximately 15000 kg. Technical specifications of the MATEC 30 HV CNC milling machine - CNC controller: BOSCH TYP 3 OSA - feed in the X/Y/Z axis: 3000/600/800 mm - maximum spindle rotational speed: 9000 rpm - minimum spindle rotational speed: 20 rpm - spindle drive power: 16 kW - tilting work head - rotation angle of work head: ± 90° every 1° - 24-position tool magazi ...

KIMLA POWERCUT LF 1530 6 kW fiber laser for tubes and sheet metal was built in 2021 in Poland. The reliable machine built on a rigid monolithic body equipped with state-of-the-art fibre technology guarantees the achievement of very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The sheets are cut with a high-quality 6 kW fibre optic beam on a steel work table with integrated automatic pallet changing system, which allows uninterrupted machining by simultaneous loading and unloading of the workpieces during the cutting process. All cutting parameters are programmed in the intelligent PC-CAM CNC controller, which allows for very fast and dynamic operation with excellent accuracy. The KIMLA fibre laser cutting machine is also equipped with an integrated cutting system, extending the machine’s machining capabilities to include the cu ...

GRASO PK030 shrink wrapping machine with GRASO TGW 30/80 heat shrink tunnel was manufactured in Poland in 2014 by Graso. The device, due to its versatility and advanced technology, optimises the process of packaging various types of products in unit packs as well as collective packages. Packaging made of heat shrink film effectively protects products from external factors, while enhancing their aesthetic qualities at the same time. The GRASO PK 030 packing machine has a large working area and a knurled bar, which guarantees excellent sealing quality. After sealing, a roller conveyor transports the product to the heating tunnel, where the film shrinking process takes place. After exiting the heating chamber, the finished pack is cooled by fans. The GRASO TGW heat shrink tunnel, in turn, is equipped with a control box, heaters with heat sinks and adjustable airflow by means of adjustabl ...

WAFO TMK 25 CNC lathe was built in 2011 in Poland by Warszawska Fabryka Obrabiarek WAFO Sp. z o.o. The machine is designed for threading and precision turning of external, internal and spherical surfaces. Workpieces with a maximum diameter of 300 mm are machined inside a fully illuminated workspace, equipped with, among others, a reliable spindle and a 4-position tool vice. Operation of the machine is significantly facilitated by the installed FANUC CNC control with the innovative MANUAL GUIDE workshop programming tool, which reduces the time between drawing up the technical drawing and the actual production of the workpiece. The WAFO metal lathe weighs 1000 kg. Technical specifications of the WAFO TMK 25 lathe - FANUC Series 0i Mate-TD CNC controller with MANUAL GUIDE - turning diameter above the bed: 300 mm - turning diameter over slide: 135 mm - maximum spindle speed: 500 rpm  ...

CK6146ZX CNC lathe was built in 2013. The machine, designed for machining rotating solids, i.e. cones, shafts and spheres with a maximum diameter of 460 mm, offers excellent precision and repeatability of the manufactured parts. The machining process is performed inside a large workspace, by means of quality cutting tools and a spindle with an optimally adapted speed range. The design, in turn, ensures high stability of machining by effectively eliminating any vibration and oscillation generated during the turning process. All this is complemented by the intuitive FANUC CNC control, which enables the creation of advanced machining programmes in just a few steps. The CK 6146ZX metal lathe weighs 2800 kg. Technical specifications of the CK6146ZX flat bed CNC lathe - CNC controller: FANUC Series 0i Mate-TD - turning diameter above the bed: 460 mm - turning diameter over slide: 240 mm  ...

BIGLIA B658/B CNC turning center was built in 2009 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, designed for machining workpieces with a maximum diameter of 380 mm, offers excellent precision and repeatability of the produced parts. The machining process is performed inside a large workspace which includes, among others, a powerful spindle, a 12-position turret and an automatic tailstock. All parameters are, in turn, entered in an intuitive FANUC CNC control with many useful functions. The BIGLIA B 658/B CNC lathe weighs 5700 kg. Technical specifications of the BIGLIA B658/B lathe - CNC controller: FANUC Series 21i-TB - maximum turning diameter: 380 mm - maximum bar diameter: 80 mm - maximum passage: 620 mm - maximum turning length: 650 mm - feed in the X/Z/B axis: 220/650/660 mm - rapid traverse in the X/Z/B axis: 20/24/12 m/min - spindle rotational speed: 30-3000  ...

BIGLIA B658 CNC turning center was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, designed for precision machining of workpieces with a maximum diameter of 380 mm, has, among others, a 12-position turret, a reliable spindle and an automatic tailstock. All process parameters, in turn, are programmed in an intuitive FANUC CNC control with many useful functions that facilitate the daily operation of the machine. The BIGLIA B 658 CNC lathe weighs 6000 kg. Technical specifications of the BIGLIA B658 lathe - maximum turning diameter: 380 mm - maximum bar diameter: 80 mm - maximum passage: 620 mm - maximum turning length: 650 mm - feed in the X/Z/B axis: 220/650/660 mm - rapid traverse in the X/Z/B axis: 20/24/12 m/min - spindle rotational speed: 30-3000 rpm - spindle bore diameter: 90 mm - spindle centre height: 1055 mm - front bearing inner diameter: 130 mm ...

OMERA OPI 250 double column press was built in 2000 in Italy by OMERA S.r.l. The machine, designed for, among others, precision stamping, bending and punching, is the perfect solution for the mass production of parts from sheet metal and strips. All these machining operations are performed by a large-area slider operating at a force of 250 tonnes. The compact, rigid gantry design significantly reduces deflection under full load, as well as allows for operation with advanced punches and dies. The equipment also includes pressure cushions and SICK light curtains, which automatically switch off the machine’s power supply if the laser beam is interrupted. The OMERA OPI 250 NF/2 press weighs 24000 kg. Technical specifications of OMERA OPI 250 hydraulic press - maximum press force: 250 t (2500 kN) - maximum pressure cushion force: 100 t - minimum pressure cushion force: 10 t - work ta ...

DECKEL MAHO DMC 103 V CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine designed for efficient 3-axis machining of workpieces is an excellent choice for any industrial plant. The machining process is performed inside a fully illuminated workspace using reliable cutting tools and a high-speed spindle. The design of the machine perfectly dampens any vibrations and oscillations generated during machining, guaranteeing maximum stability during even the most intense challenges. All of this is complemented by the intuitive SIEMENS CNC control, which allows advanced programmes to be created in just a few steps. The offered DECKEL MAHO CNC vertical machining center has worked 20938 hours to date. Technical specifications of the DECKEL MAHO DMC 103 V CNC milling machine - CNC controller: SIEMENS SINUMERIK 810D - number of axes: 3 - feed in the X/Y/Z axis: 10 ...

AVIA VMC 1000 CNC machining center was built in 2017 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A.. The machine, distinguished by its extensive machining capabilities and state-of-the-art technical solutions, will meet any, even the most demanding challenges. Workpieces with a maximum weight of 1000 kg are machined by an extremely fast spindle with thermo-stabilisation, which, combined with precision cutting tools, guarantees excellent milling results. On the other hand, the machine’s high-quality construction with sliding doors offers maximum stability in machining by effectively eliminating any vibrations generated during milling. The AVIA CNC vertical machining center is offered with an extensive range of equipment, including toolholders, digital axis servo drives and the intuitive SIEMENS numerical control with ShopMill 3D overlay. The total weight of the machine is 5300 k ...

DECKEL MAHO DMU 60P CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine with its extremely sturdy construction was designed for the most intensive 5-axis workpiece machining. Inside the large working area, there is, among others, a 24-position tool magazine and an electro-spindle, which rotates at a maximum speed of 12000 rpm. All of this is complemented by an advanced HEIDENHAIN CNC control with an intuitive interface, where machining programmes are created in just a few steps. The DECKEL MAHO milling center has had only one owner to this date. Technical parameters of the DECKEL MAHO DMU 60P milling center - number of axes: 5 - feed in the X/Y/Z axis: 600/650/550 mm - maximum electro-spindle rotational speed: 12000 rpm - minimum electro-spindle rotational speed: 20 rpm - electro-spindle drive power: 15 kW - tool holder: SK-40 - operating hours: 7 ...

HAAS ST-30 CNC turning center was built in 2012 by the renowned American brand HAAS AUTOMATION INC. The machine, designed for precision machining of workpieces with a maximum diameter of 381 mm, is equipped with among others a 12-position turret, a reliable spindle and a 254 mm chuck. The compact design and the emphasis on high turning productivity and precision make the machine an excellent choice for any industrial facility. So far, the machine has mainly been used for machining aluminium castings and has been serviced on a regular basis. The HAAS CNC lathe weighs 4944 kg. Technical parameters of the HAAS ST-30 lathe - CNC controller: HAAS - maximum turning diameter: 381 mm - maximum turning length: 826 mm - maximum part deflection: 533 mm - maximum bar diameter: 76 mm - feed in the X/Z axis: 239/826 mm - rapid traverse in X,Z axis: 24 m/min - maximum spindle rotational spee ...

HAAS SL-20 TBHE CNC turning center was built in 2009 by the renowned American brand HAAS AUTOMATION INC. The machine offers an excellent combination of functionality, productivity and precision, making it the ideal choice for any industrial facility. Workpieces with a maximum diameter of 584.2 mm are machined inside a large workspace equipped with, among others, a 10-position turret, a reliable spindle and a fully programmable hydraulic tailstock. To this date, the machine has mainly been used for machining aluminium castings (two-shift operation) and has been serviced on an ongoing basis. The HAAS SL-20 CNC lathe weighs 4800 kg. Technical parameters of the HAAS SL-20 TBHE lathe - CNC controller: HAAS - maximum turning diameter: 262 mm - turning diameter above the bed: 584.2 mm - turning diameter over the slide: 241.3 mm - maximum turning length: 508 mm - feed in the X/Z axis: 2 ...