used Angular feeds for sale

Code 0782 Description Centerlathe Make A.I. Hembrug Model DR - 133 Serial No. DR 133 / F 4018 Year 1970 Distance between centers 750 mm Swing over bed 270 mm Swing over gap xxx mm Swing over crossslide 150 mm Spindle bore 35 mm Number of spindle speeds 28 Spindle speeds 18 – 3550 rpm Feeds Longitude and cross Motor power 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck 2 x RSF DRO Condition Machine is in normal condition.

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Control: GE MARK CENTURY ONE PLUSTechnical datanumber of toolsDrill capacity in steel: 23 mmSpindle speeds :steps: 9 from: 42 rpmup to: 3500 rpmTable length: 820 mmTable width: 400 mmLongitudinal travel: 400 mmTransversal travel: 320 mmVertical travel: 470 mmFeeds: 1000 mm/minRapid traverse:: 3.5 m/minVoltage 50 Hz 3x: 380 VoltPower: 2.5 kW

Universal Milling Machine AGURSAL JARBE type F50 Travel X: 1500 mm Travel Y: 750 mm Travel Z: 500 mm Cone: SA 40 Rotation: from 31 to 1400 RPM Table size2000 x 600 mm Year of construction: 1991 Universal Head type HURON Scale 3 axes HEIDENHAIN Centralized lubrication Lubricant pump Variable speed drive for feeds X / Y / Z Voltage: 380 V Spindle motor power: 17 CV Width with ends table 3300 mm Width without ends table: 2000 mm Depth: 2500 mm Total height: 2200 mm Weight: 6 T

We have for sale a number of used hydrocyclones from the German manufacturer AKW A+V. Condition: USED Type: RWS 105 Nominal Diameter mm: 50 mm Cut Size dT50,?m: 5-15 Pressure Loss,bar: 1,5 - 3.0 Capacity ,m3/h: 2,4 -7,6 - High pressure resistance, The best operating pressure is much higher than the like products, much easier to reach the better separating effect, good cost performance. - Each type of hydrocyclones has big amount of successful applications, it can ensure that every operating hydrocyclone has the balance feeds. - The involute design from Germany makes the AKW hydrocyclones having better effects of concentration and separation. - Extra long lifetime. - Standardized parts, it is very convenient to change the spare parts.

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

Vertical machining center ARES SEIKI S6040 with roto pallet Make: ARES SEIKI Model: S6040 YEAR 2019 X-AXIS TRAVEL 600 mm Y-AXIS TRAVEL 400 mm Z-AXIS TRAVEL 500 mm DISTANCE SPINDLE NOSE-TABLE 180-680 mm RAPID FEEDS X-Y-Z 36 – 36 – 48 m/min SPINDLE 12000 rpm; 5,5-7,5 kW; ISO 40 – DIN PALLET N.2 ; 700X400 mm MAX ADMITTED LOAD 250 Kg TOOL MAGAZINE CHAIN-TYPE ; 24 POS CONTROL UNIT MITSUBISHI M80 WEIGHT 6600 Kg OVERALL DIMENSIONS 3660 x 2585 x 2780 mm ACCESSORIES HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PAPER FILTER ; PORTABLE HANDWHEEL ; ETHERNET PORT ; RS 232 SERIAL PORT NOTE MACCHINA COMPLETA DI N.13 CONI PORTAPINZA; N.1 CONO PORTAFRESA; N.1 TASTATORE 3d.

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

Universal tool milling machine, used universal milling machine, used Type FU 315 - V/2 Fabr. WMW Heckert Built: 1979 Table size/ table: 1250 x 315 mm Laengsmotion/ longit. move: X: 850 mm Horizontal movement/ horiz. Move: Y: 270 mm Vertical movement/ Vert. move : Z 355 mm Tool holder/taper: ISO 50 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 28 - 1400 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t

Baader 1741 fish heading machine Condition: overhauled Designed for heading of cod, pangasius, catfish, tilapia. BAADER 1741 separates the head from the body by two circular knives located at an angle to each other. The head is hereby kept back by a flap thus saving the valuable meat from the neck part of head. At a comfortable working height one operator feeds the fish with the head up into the machine. Supported by the vertical fins on two fish guides, the fish is transported through the machine by two conveyors circulating at a constant speed and equipped with drivers. The two knives than separates the head from the body close behind the collar fins. The deheaded fish falls on a an ascending conveyor belt and is transported to the next processing station whereas the heads leave the machine on a chute at the side. Fish size range: 30 – 70 cm Capacity: up to 40 fish per m ...

Optimal for processing cod, saithe, haddock, and yellowtail, the Baader 444 stands out as the ideal choice for both heading and gutting. Maintaining the collarbone on the trunk, the Baader 444 is particularly well-suited for handling saltfish during the processing. For gutting alone, the heading function can be deactivated. An operator feeds a fish back forward and head to the right into feeding device of a drum and fixed by clamps. Grills device goes down to fish and makes a cut. Shoulder bones do not damage during the cut operation. The drum moves a fish to a knife for trimming a fish belly. Circle knife goes along the shoulder bones and separates it and a membrane from the back bone. After that, during the drum rotation the machine provides cutting of a head. Then a fish move for the gutting operation - crescent knife opens it, and trimming tools removes a viscera from a belly  ...

The machine can gently separate meat from waste components, like bones, veins, and skin. It processes fish, deboned turkey drumsticks, chicken backs, legs, wings, tails, necks, and turkey and chicken carcasses. The solid components remain outside the drum. The ratio between yield and quality can be influenced by means of adjusting the pressure roller. A flexible squeezing belt transports a product to the perforated drum, where it is pressed between the belt and drum. The soft components come inside of the drum through the holes. The solid components stay outside. Yield and quality can be adjusted using the pressure roller. Operation process with a flexible squeezing belt feeds the product to a perforated drum and presses the soft components through the holes of the drum. Capacity: up to 3500 kg per hour Voltage: 3 x 400 V Hole diameter: 2 or 5 mm

Code 71130 Description Radialbohrmaschine Make BREDA Modell R 55 x 1600 Serial No. 224 Year 1990 Capacity in Steel 60 55 mm Capacity in Cast Iron 70 mm Thread cutting in Steel 60 M 50 Thread cutting in Cast Iron M 65 Spindle taper 5 MC Spindle radius: max / min 1785 / 495 mm Spindle traverse 1290 mm Min / Max height spindle / top of base plate 505 - 1670 mm Arm traverse 855 mm Quill stroke 310 mm Number of speeds 12 Spindle speed range 30 - 1200 rpm Number of spindle feeds 8 Spindle feed range 0,06 – 1,0 mm/rev Baseplate size 2505 x 1000 mm Clampsurface base plate 1700 x 1000 mm Main motor 4,4 kW - 380 Volts Dimension of machine 2570 x 1000 x 2740 (3275) mm ( L x W x H ) Weight 4070 kg Accessoiries Box 1000 x 700 x 500 mm Coolant Hydraulic cl ...

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Cincinnati Grinding Machine 2 Technical Details Type of machine: 60 x 240 Year of Installation: 1954 Dimensions Distance between centers: 240 (6096 mm.) Max. working diameter with new stone: 60(1524 mm.) Max. allowable workpiece weight: 58967 Kg. (58.967 T) Stone Dimensiones: 36”x4”x20”(914x101.5x508mm.) Stone Speeds: 300 ̴ 700 Rpm Drive Head Spindle Speed: 0 ̴ 35 Rpm Longitudinal Slide Motion Feeds: 400 ̴ 2520 mm/min. Rapid movement: 2520 mm/min Cooling Devices Liquid capacity in the tank: 2568 liters                                                                                                                                                 

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

CMA TRD 38 CNC 3000 CNC drilling machine was built in 2015 in Spain by COMERCIAL DE MAQUINARIA ALZIRA S.L. The machine, designed for drilling precision holes and threading, is an excellent choice for companies specialising, among others, in the construction of machinery, the production of steel structures or the production of other industrial installations. The machine is characterised by, among others, a movable, precise work head and an extremely stable design, made of sections with thickened and reinforced walls. The machining process is performed in three axes (X,Y,Z). In order to achieve excellent dynamic and repeatable feeds, movement in all axes takes place on hardened, high-quality linear guides. All running components are also continuously and fully automatically lubricated, ensuring uninterrupted machine operation for many years of use. The CMA TRD 38 CNC beam drilling machi ...

Table length: 1400 mmTable width: 300 mmLongitudinal X: 900 mmCross Y: 350 mmVertical Z: 500 mm Make CME FU 2 MU Type FU 2 Universal Year 1992 Universal horizontal and vertical milling machine Table length (mm)L = 1.400 Table width (mm)W = 300 Longitudinal X (mm)X = 900 Cross Y (mm)Y = 350 Vertical Z (mm)Z = 500 Horizontal & Vertical Feeds in 3 axis Huron type milling head  

Table length: 1400 mmTable width: 300 mmLongitudinal X: 900 mmCross Y: 350 mmVertical Z: 500 mm Make CME FU 2 MU Type FU 2 Universal Year 1992 Universal horizontal and vertical milling machine Table length (mm)L = 1.400 Table width (mm)W = 300 Longitudinal X (mm)X = 900 Cross Y (mm)Y = 350 Vertical Z (mm)Z = 500 Horizontal & Vertical Feeds in 3 axis Huron type milling head  

CNC Vertical lathe GORBREX Model: TKV 512 Year of manufacture: 2016 CNC CONTROL: SIEMENS SINUMERIK 828 Brand new machine, modified of SEDIN 1512 Excellent condition! Machine fully modernized and modified of SEDIN 1512. Machine with new electrical unit, new lubrication unit, painted, slideways regrinded, replacement of worn mechanical parts. Machine will be equipped with new CNC control SIEMENS SINUMERIK 828 Machine will be built on order Delivery Time: app. 2 months Technical details: Turning diameter: 1250 mm Faceplate diameter: 1120 mm Max workpiece height: 1000 mm Max.workpiece weight: - 3200 mm (5...80 rpm) - 1000 mm (250 rpm) Max swivel angle(upper carriage): 45 Max vertical feed(side carriage): 5 Number of ranges of table speeds: 18 Table speed: - min.: 5 rpm - max. 250 rpm Number of ranges of carriage feeds: 16 Carriage feed: - min.: 0.07 rpm -ma ...

Manufacturer: GORBREX Model: TKV 532 CNC New in: 2015 Control: SIEMENS SINUMERIK 828 Machine fully modernized and modified of SEDIN 1L532 with new electrical and lubrication unit, painted, replacement of damaged mechanical parts, with possibility of upgrading. The upgrade is made of cast iron, on request we can equip the machine with the new CNC control SIEMENS SINUMERIK 840. Delivery time: max. to 3 - 4 months Technical details Number of columns: 2 Number of carriages: 1-option 2 Type of carriage: Ram Number of axis controlled: X/Z option X1/Z1,C Max. turning diameter: 3200 mm Table diameter: 2800 mm Max workpiece height: 1600 mm with possibility of upgrading up to 2200 mm Max table load: 16 000 kg Range of table speeds: 70 rpm Number of table speeds ranges: 3 Vertical travel in Z axis( ram travel): 1200 mm Horizontal travel of carriage in X axis: 1720 mm Worki ...

Horizontal Boring Machine CORNAC C100 Travel X: 1000 mm Travel Y: 1000 mm Travel Z: 1260 mm ixed table Cone SA 50 Spindle: Ø 100 mm Spindle exit: 550 mm Rotation: from 10 to 1250 RPM Table size: 1550 x 980 mm Surfacing plate: Ø 520 mm Spindle motor: 9,5 kW Scale 3 axes HEIDENHAIN Automatic Feeds: X - Y - Z Supplied with a set of cones Voltage: 380 V Dimensions (L x W x H): 4500 x 2100 x 2450 mm Weight: approx 8 T

Manufacturer CORREANAYAK Model VH PLUS-3000 Year of Manufacture 2013 CNC HEIDENHAIN TNC 530 HSCI Table Table Surface 3.200 x 1.100 mm T slots 7 T slots width 22 mm Distance between T Slots 150 mm. Max.weight allowed on table 8.000 kg Travels and Feeds Logitudinal travel (X Axis) 3.000 mm Cross travel (Y Axis) 1.700 mm Vertical travel (Z Axis) 1.500 mm Rapid Traverse 20.000 mm/min Max. Working Feed 10.000 mm/min 45º automatic head INCLUDED Indexing head 0.1º/0.1º Taper ISO-50 DIN 69871 AD Turning Speeds 60 – 6.000 r.p.m. Speed Ranges 2 Main Motor Power 38 kW ATC INCLUDED Positions at ATC 30 Equipment Internal Coolant 40 Bar INCLUDED Chip Conveyor INCLUDED Chip Conveyor INCLUDED Portable Handwheel INCLUDED Electrical cabinet coolant INCLUDED Integral protecting guards INCLUDED Others Machine total power 48 kW Machine Weight 30.000 kg.

Manufacturer CORREANAYAK Model VH PLUS-3000 Year of Manufacture 2013 CNC HEIDENHAIN TNC 530 HSCI Table Table Surface 3.200 x 1.100 mm T slots 7 T slots width 22 mm Distance between T Slots 150 mm. Max.weight allowed on table 8.000 kg Travels and Feeds Logitudinal travel (X Axis) 3.000 mm Cross travel (Y Axis) 1.700 mm Vertical travel (Z Axis) 1.500 mm Rapid Traverse 20.000 mm/min Max. Working Feed 10.000 mm/min 45º automatic head INCLUDED Indexing head 0.1º/0.1º Taper ISO-50 DIN 69871 AD Turning Speeds 60 – 6.000 r.p.m. Speed Ranges 2 Main Motor Power 38 kW ATC INCLUDED Positions at ATC 30 Equipment Internal Coolant 40 Bar INCLUDED Chip Conveyor INCLUDED Chip Conveyor INCLUDED Portable Handwheel INCLUDED Electrical cabinet coolant INCLUDED Integral protecting guards INCLUDED Others Machine total power 48 kW Machine Weight 30.000 kg.

Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool  ...

Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool  ...

Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool  ...

DEA GLOBAL S 07.05.05 coordinate measuring machine was manufactured in Italy in 2004. The machine performs fast and highly accurate measurements of workpieces with complex shapes using the contact or non-contact method, represented as a set of coordinate points. The excellent quality and precision of the process is guaranteed thanks to the mounted in the DEA GLOBAL S 07 05 05 CMM machine an indexable RENISHAW PH10MQ measuring head with a RENISHAW SP25M scanning probe, performing measurements in the X,Y,Z axes with feeds of 700 mm (X axis), 500 mm (Y axis) and 500 mm (Z axis). The DEA GLOBAL Status 07.05.05 measuring machine is also equipped with the highly advanced metrology software PC-DMIS 2019 R1, performing detailed geometric measurements. Technical specifications of the DEA GLOBAL S 07.05.05 measuring machine - maximum permissible error of length measurement MPEe: ± 2.3 + 3L/10 ...

DEA SCIROCCO 151310 coordinate measuring machine built in 1997 in Italy, is used to make fast and highly accurate measurements of workpieces with complex shapes. Workpiece measurements are taken using contact or non-contact methods, which are then represented as a set of point coordinates. The dimensions of the measured workpiece are taken using the RENISHAW TP7M measuring probe, which is installed on the RENISHAW PH10MQ indexing head. The measuring probe uses strain gauge technology to eliminate granularity errors and achieve the highest measurement quality in the X,Y,Z axes with feeds of 1500 mm (X axis), 1300 mm (Y axis) and 1000 mm (Z axis). The measuring machine is offered with a wide range of equipment, including an advanced PC-DMIS package for Windows, performing detailed geometric measurements. The total weight of the machine is 3650 kg. Technical data of the DEA SCIROCC ...

Code 4923 DESCRIPTION Universal milling machine Make DEBER Model FU 1 Serial No. 228 Year Table 1250 x 300 mm Longitude table 750 mm Vertical table 405 mm Cross table 240 mm Spindle taper 40 ISO Speeds 40 - 2000 rpm Feeds X-Y-Z 14 - 700 mm/min Rapides 1 and 2 m/min Spindle motor 5,5 kW - 380 Volts Weight of machine 2000 kgs Accessories universal millinghead ( 2 x turnable ) Coolant Condition Machine is in very good condition

Machine Details Stock-No. 1105-03873 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 1 Year of manufacture 1985 Type of control conventional Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis ex Warehouse Technical details X-Travel 300 mm Y-Travel 150 mm Z-Travel 340 mm tool taper SK 40 spindle turning speed range 40 - 2000 rpm Feeds 10 - 500 mm/min table-size 600 x 210 mm engine output 1,5 / 1,8 kW Weight of the machine approx. 700 kg dimensions of the machine approx. 1.6 x 1.2x 1.6 m Additional information NICE MACHINE WITH UNIVERSAL TABLE

Code 1815 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 3 A S/N 2206-0593 Year 1980 Control Grundig 2102 ( position ) Table 800 x 460 mm Longitude ( X – axis ) table 500 mm Vertical ( Y – axis ) table 400 mm Cross ( Z – axis ) spindle 300 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 25 - 2500 rpm Feeds X-Y-Z 1 – 500 mm/min Rapides 1,5 m/min Spindle motor 2,0 / 4,0 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Description Universal tooling machine from Lid suitable for tooling, fixture construction, training as well as mold making Technical data Year of construction / YOM 1991 Speeds / Spindle 63 - 6300 rpm Steuerung Control CNC Grundig Dialog 11 Vorschübe / Feeds 2 - 3000mm/min Tisch / Table 910 x 530mm Recording / Taper ISO 40 Way / Travel (X,Y,Z) 600x500x500mm Weight /Weight ca 1830kg Changer / Tool changer No Dimensions / Dimension 2500x2000x2000mm Travel: 600x500x500mm Speed: 31.5 - 6300 rpm The machine comes from a tool making and has been regularly serviced.

Code 0733 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 4 MA S/N 2204-1372 Year 1987 Control Grundig - Contour 2 Table 800 x 460 mm Longitude ( X – axis ) table 485 mm Vertical ( Y – axis ) table 380 mm Cross ( Z – axis ) spindle 385 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 63 - 3150 rpm Feeds X-Y-Z 2 - 3000 mm/min Rapides 3 m/min Spindle motor 3,7 / 4,4 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Code 8520 DESCRIPTION CNC bed milling machine Make DECKEL Model FP 42 A S/N 2388 – 0155 Year 1981 Control Grundig 2301 Table 1380 x550 mm Longitude ( X – axis ) table 1170 mm Vertical ( Y – axis ) table 370 mm Cross ( Z – axis ) spindle 370 mm Spindle taper 40 ISO 21 Speeds 10 - 2000 rpm 21 Feeds X-Y-Z 1 - 2500 mm/min Spindle motor 3,7 / 4,4 kW – 380 Volts Weight 3000 kgs Accessories Coolant Condition Machine is in good condition

DECKEL MAHO DMC 103 V CNC vertical machining center manufactured in Germany in 2005 is the ideal solution for serial or unit production. The machine efficiently machines heavy workpieces with a maximum weight of 500 kg using reliable components in the form of cutting tools and a high-speed spindle. The extremely stable construction made of high-quality raw materials effectively dampens any vibrations generated during milling, guaranteeing the highest possible process stability without any disruption. All this makes the DECKEL MAHO FAMOT DMC 103V CNC milling center the best choice for any production facility. The total weight of the machine is approximately 4500 kg. Technical specifications of the DECKEL MAHO DMC 103 V CNC milling machine - work table dimensions (L x W): 800 x 500 mm - feeds in the X/Y/Z axis: 630/500/500 mm - rapid traverse in X,Y,Z axis: 30000 mm/min - stepless a ...

DECKEL MAHO DMC 50 V CNC machining center was built in Germany in 1995. The machine distinguished by its robust, stable construction is used in precision face and hole machining using rotary tools. The machine is ideal for use in any production facility thanks to its reliable components, such as the high-performance FRANZ KESSLER DMS100.AL.4.FOM spindle and the 20-position tool magazine with automatic tool changing, which guarantee perfect milling precision and accuracy. The DECKEL MAHO CNC vertical machining center weighs 7000 kg. Technical specifications of the DECKEL MAHO DMC 50 V CNC milling machine - work table dimensions (L x W): 700 x 400 mm - feed rates in the X/Y/Z axis: 500/420/500 mm - speed of feeds in the X/Y/Z axis: 1-2000 mm/min - feed motor power in the X/Y/Z axis: 3.5 kW - maximum workpiece weight: 800 kg - maximum spindle rotational speed: 15000 rpm - maximum  ...

DECKEL MAHO DMU 50 EVOLUTION CNC machining centre was manufactured in Germany in 1999. The machine designed for precision machining of workpieces, has a high-quality steel construction, equipped with the best components. The machining process of metals is performed on a 500 mm long and 380 mm wide milling centre work table, using a powerful 15 kW spindle, guaranteeing excellent precision and a significant reduction in milling time. The CNC milling machine has 5 axes (X,Y,Z,C,B) with feeds of 500 mm (X axis), 420 mm (Y axis), 380 mm (Z axis), 180° (C axis) and 360° (B axis). A wide range of equipment is offered with the vertical machining centre, including: a control panel with HEIDENHAIN TNC 430 CNC control installed, a capacious tool magazine and a workpiece probe. The total weight of the machine is 6000 kg. Technical data of the CNC DECKEL MAHO DMU 50 EVOLUTION milling centre  ...

DECKEL MAHO DMU 60 T CNC vertical machining centre was built in Germany in 1999. The machine performs precision machining of workpieces weighing up to 350 kg, in three axes with feeds of 600 mm (X axis), 525 mm (Y axis) and 500 mm (Z axis). Workpieces are placed on a tilting rotary table with the dimensions (L x W): 900 x 500 mm and they may also be machined horizontally, thanks to the mounted detachable milling head The high-performance spindle of the milling centre rotating at a speed of 12000 rpm, together with the advanced HEIDENHAIN Mill+ numerical control, guarantee excellent precision, quality and a significant reduction in machining time. The milling centre’s tool magazine has a capacity of 25 tools and provides tool changes in a very short time. The CNC milling machine is also equipped with a post-processor with CAD/CAM software and a desktop computer. The total weight of t ...

DMG DMC 160U DUOBLOCK WITH 6 PALLET CHANGER Manufacturer DMG Model DMC 160U duoBLOCK Year 2008 CNC SIEMENS 8400 Powerline 3D Table Rotary pallet changer INCLUDED Rotary pallet storage RS4 – 4 pallets + 2 pallets in machine INCLUDED Total pallets 6 Pallet surface 1.250×1.000 mm. T Slots DIN 55201-A2 Table turning range (C Axis) 0,001 º (Continuous) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Main Spindle Automatic swivel milling head 0.001 º (Continuous) Rapid Traverse 60.000 mm/min Spindle taper HSK-A 63 DIN 69893 Spindle speed 20-30.000 rpm Main spindle power 85/65 kW Main spindle torque 40/32 Nm Automatic tool changer Type Horizontal double gripper ATC positions 120 Equipment Internal Coolant 50 bar INCLUDED Coolant deposit capacity 980 l. Oil and emulsion mist separ ...

DMG DMC 160U DUOBLOCK WITH 6 PALLET CHANGER Manufacturer DMG Model DMC 160U duoBLOCK Year 2008 CNC SIEMENS 8400 Powerline 3D Table Rotary pallet changer INCLUDED Rotary pallet storage RS4 – 4 pallets + 2 pallets in machine INCLUDED Total pallets 6 Pallet surface 1.250×1.000 mm. T Slots DIN 55201-A2 Table turning range (C Axis) 0,001 º (Continuous) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Main Spindle Automatic swivel milling head 0.001 º (Continuous) Rapid Traverse 60.000 mm/min Spindle taper HSK-A 63 DIN 69893 Spindle speed 20-30.000 rpm Main spindle power 85/65 kW Main spindle torque 40/32 Nm Automatic tool changer Type Horizontal double gripper ATC positions 120 Equipment Internal Coolant 50 bar INCLUDED Coolant deposit capacity 980 l. Oil and emulsion mist separ ...

Manufacturer DMG-MORI Model DMF 260 Year 2011 CNC SIEMENS SINUMERIC 840D Table Table dimensions 2,900 x 700 mm. Max workpiece weight 2.150 kg. Tavels and feeds Longitudinal traverse (X Axis) 2,600 mm Cross traverse (Y Axis 700 mm Vertical traverse (Z Axis) 700 mm Rapid traverse axis (X,Y,Z) 40 m/min Feed rate (X/Y/Z) 40 m/min Acceleration in the axis 4 m/s2 Main Spindle Turning speeds 14,000 mm/min Taper SK 40 DIN 69872 Spindle power 18.4 / 14 kW Automatic tool changer ATC Positions 30 Max. tool length 300 mm Max. tool weight 6 kg. Max. tool diameter with free neighboring places 130 mm Max. tool diameter without free neighboring places 80 mm Equipment Internal coolant 40 Bar / 600 l INCLUDED Longitudinal chip conveyor INCLUDED Cleaning gun INCLUDED Portable handwheel INCLUDED Direct measuring system INCLUDED Machine hours Machine power on hours 18.859 ...

Manufacturer DMG Model DMU 160P Year 2002 CNC HEIDENHAIN iTNC-530 Table Table surface 1,500 x 1,250 mm. Max weight allowed on table 4,000 kg. Table turning range (C Axis) 0.001 º (Continuous) Travels and feeds Longitudinal travel (X Axis) 1,600 mm. Cross travel (Y Axis) 1,250 mm Vertical travel (Z Axis) 1,000 mm. Horizontal/Vertical Auto Indexing Head (A Axis) 0.001º (Continuous) Rapid Traverse 60,000 mm/min Spindle taper SK-40 DIN 69871 Spindle speed 20-18,000 rpm Main spindle power 28 kW Equipment Automatic tool changer INCLUDED ATC positions 60 Coolant deposit capacity 200 l. HEIDENHAIN optical scales INCLUDED Chip conveyor INCLUDED Portable handwheel HEIDENHAIN HR-410 3D-Rot INCLUDED Tool touch probe INCLUDED M-function for internal / external lubricant INCLUDED Ready for internal coolant INCLUDED Mode 4 operation INCLUDED Others Positioning precis ...

Manufacturer DMG Model DMU 160P Year 2002 CNC HEIDENHAIN iTNC-530 Table Table surface 1.500 x 1.250 mm. Max weight allowed on table 4.000 kg. Table turning range (C Axis) 0.001 º (Continuo) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Horizontal / Vertical Auto Indexing Head (A Axis) 0,001 º (Continuo) Rapid Traverse 60.000 mm/min Spindle taper SK-40 DIN 69871 Spindle speed 20-18.000 rpm Main spindle power 28 kW Equipment Automatic tool changer INCLUDED ATC positions 60 Coolant deposit capacity 200 l. HEIDENHAIN optical scales INCLUDED Chip conveyor INCLUDED Portable handwheel HEIDENHAIN HR-410 3D-Rot INCLUDED Tool touch probe INCLUDED M-function for internal / external lubricant INCLUDED Ready for internal coolant INCLUDED Mode 4 operation INCLUDED Others Positioning precisi ...

Description CNC tool milling machine from DMG suitable for tooling, fixture construction, training as well as mold making Travel: 350x240x340mm Speed:20-6300rpm Technical data Year built / YOM 1999 Spindle speeds 20-6300rpm Steuerung / Control Siemens 810 D Shopmill Feeds 2-5000mm/min Table / Table 400x280mm Engine / Motor 5.5Kw Longitudinal / Travel (X,Y,Z) 350x240x340mm Machine Weight /Weight ca 1600kg Tool holder / Taper SK 40 Dimensions / Dimension 2000x2000x2000mm

Machine Details Stock-No. 1105-04041 Type of machine Machining Center - Vertical Make LID MAHO DMG Type DMC 635 V Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight basis EX WORK Price Technical details X-Travel 635 mm Y-Travel 510 mm Z-Travel 460 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid motion -longitudinal/cross/vertical 30 m/min No. of Tools in Magazine 20 workpiece diameter at full load 80 mm wotkpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg table load 600 kg spindle drive 9 / 11 kW control HEIDENHAIN TNC 530I total power requirement 30 kVA Additional information cnc HEIDENHAIN I TNC 530 MAGSIN POSITIONS 32 SK 40 El ...

Machine Details Stock-No. 1105-03325 Type of machine Machining Center - Universal Make DMG Type DMU 70 V Year of manufacture (2000) Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details x-travel 750 mm y-travel 600 mm z-travel 520 mm table-size ø 700 x 500 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12,000 rpm feeds longditudinal/cross/vertical 20,000 mm/min rapid traverse 50 m/min ATC 24x workpiece length 315 mm weight of tools max. 6 kg table load max. 0.35 t weight of the machine approx. 7 t Additional information , chip conveyor CNC CONTROL HEIDENHAIN I TNC 430 12000 RPM SK 40