used CNC Milling Centers for sale

5 axis X-Axis 800 mm Y-Axis 800 mm Z-Axis 600 mm Interference circle diameter 1070 mm Distance Spindle Up to 823,5 mm Machine-Table Load 1000 Kg Maximum rapid travel X/Y/Z at TCP max 75 m/min Cutting-Tool Interface HSK-A63 Motor Spindle Power at CDF 25% max 50kW Engine Spindle Torque at CDF 25% max 187 Nm Machine weight 13000 kgs Wiring diagram: 2526-95-64934955 Resy Filtration system Model : 14-P00449-3 Serial : KBF- 452/500 Erowa pallet changer Model RobotEasy Serial number ERE1364 Year 2014 Weight 1300kgs Hyfra Pedia chillers Model sigma 7-s

AVIA VMC 1000 CNC machining center was built in 2017 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A.. The machine, distinguished by its extensive machining capabilities and state-of-the-art technical solutions, will meet any, even the most demanding challenges. Workpieces with a maximum weight of 1000 kg are machined by an extremely fast spindle with thermo-stabilisation, which, combined with precision cutting tools, guarantees excellent milling results. On the other hand, the machine’s high-quality construction with sliding doors offers maximum stability in machining by effectively eliminating any vibrations generated during milling. The AVIA CNC vertical machining center is offered with an extensive range of equipment, including toolholders, digital axis servo drives and the intuitive SIEMENS numerical control with ShopMill 3D overlay. The total weight of the machine is 5300 k ...

AVIA X-5 1250/630 CNC vertical machining center was built in 2015 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for, among others, precision milling, drilling and threading of workpieces with complex geometries in 5 axes. All these machining operations are performed by a high-speed electro-spindle located on a tilting working head. The tilting head, in turn, offers the possibility to use shorter tools and select the optimum cutting angle. The AVIA X-5 5-axis CNC machining center is offered with an extensive range of equipment, including a rotary table, measuring probes and a intelligent HEIDENHAIN CNC controller. The total weight of the machine is 10000 kg. Technical specifications of the AVIA X-5 1250/630 CNC milling machine - number of axes: 5 (X,Y,Z,B,C) - feed in the X/Y/Z axis: 1250/700/725 mm - B axis rotation range: -110°/+45° - C axis rota ...

X-axis: 1,020 mm Y-axis: 610 mm Z-axis: 600 mm Table dimensions: 1,150 x 580 mm Spindle Holder: BT-40 Spindle speeds: 100 - 10,000 rpm. Tool changer: 30 positions Control: Heidenhain TNC410 Equipped with: - Internal spindle cooling (IKZ) 9 bar - 4th axle of Hofmann WRMH-300R - Approx. 20 tools - Tilting table for the 4e axis - Operating instructions and documents Country of origin: UK Motor power: 11 kW Machine weight: 4,400 kg Machine LxWxH: 280 x 240 x 270 cm

BRIDGEPORT VMC 600/22 Digital CNC machining center was built in 2000 by the English brand Bridgeport Machines Inc. The machine, equipped with among others 4th axis and a 22-position magazine, is used for precision machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a reliable spindle with an optimised speed range, which is driven by a powerful motor. This power allows full utilisation of the cutting tools in any, even the most intensive, production process. All this is complemented by the HEIDENHAIN CNC control, which allows advanced programmes to be created in just a few steps. The BRIDGEPORT CNC vertical machining center weighs 2500 kg. Technical data of the BRIDGEPORT VMC 600/22 Digital CNC milling machine - CNC controller: HEIDENHAIN TNC 426PB - feed in the X/Y/Z axis: 600/410/520 mm - rapid traverse in the X/Y/Z axis: 40/40/20 m/min  ...

Stock number: 3974 PROCESSING Manufacturer: CHEVALIER, Type: 2040 VMC Machines NO.: MC93AB05, Year of manufacture: 2005 Specifications: Table size 1200 x 450 mm Longitudinal movement (X) 1020 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Spindle cone ISO 40 Stepless spindle speeds 8000 rpm Total power 7.5 kW Tool changer 20 places Control Fanuc 0M Fabr. Controlled in axles 4 Accessories: CNC rotary table. CNC-201R dia .200 Length: 2350 mm, Height: 2650 mm, Width: 2750 mm, Weight: 5800 kg

CHIRON FZ 18 KL CNC vertical machining center was built in 2000 in Germany by CHIRON Werke GmbH & Co. KG. The machine is used for precise, multi-axis machining of workpieces with complex geometries. For this task, the work space has been equipped with reliable components in the form of, among others, a hydraulically clamped spindle and a 40-position tool magazine. In addition, in order to ensure excellent movement dynamics, all linear axes (X,Y,Z) are driven by a high-performance servomotor with HFUC 50-100 harmonic transmission. The CHIRON FZ 18K L HIGH SPEED CNC machining center is offered with a wide range of equipment, including e.g. a 4th axis that is fully integrated into the numerical control and operated via M-codes. The total weight of the machine is 10000 kg. Technical specifications of the CHIRON FZ 18 KL milling center - feed in the X/Y/Z axis: 2000/520/630 mm - maximum  ...

CINCINNATI ARROW 1250 CNC vertical machining center was built in 2001 in the United Kingdom by CINCINNATI MACHINE U.K. LIMITED. The machine, distinguished by its high reliability, productivity and precision, is used for the economic machining of workpieces. The machining process is performed inside a large work space, equipped with, among others, a 21-position tool magazine and a high-speed spindle. Its high-quality design eliminates any vibrations generated during milling, guaranteeing the highest possible stability during even the most intensive challenges. The offered CINCINNATI ARROW 2 1250 CNC machining center has undergone regular maintenance and servicing. The machine is after an spindle overhaul and the replacement of guides and screws in the X and Y axes. The total weight of the machine is 6000 kg. Technical specifications of the CINCINNATI ARROW 1250 CNC milling machine - C ...

CINCINNATI ARROW 500 CNC milling machine built in 1999, is the perfect choice for precision machining of workpieces in series and unit production. The machining process is carried out using reliable components in the form of tools taken from a 21-position magazine and a high-speed spindle. During machining, the extremely stable machine design effectively dampens any vibrations and oscillations, resulting in improved workpiece surface quality and increased tool life. The CINCINNATI CNC machining center also features an intuitive CNC controller, which allows the process to be quickly and easily programmed and controlled. The total weight of the machine is 3050 kg. Technical specifications of the CINCINNATI ARROW 500 milling center - CNC controller: ACRAMATIC 2100E - number of axes: 3 - feed in X/Y/Z axis: 510/510/510 mm - work table dimensions (L x W): 520 x 700 mm - maximum spindl ...

DECKEL MAHO DMC 103 V CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine designed for efficient 3-axis machining of workpieces is an excellent choice for any industrial plant. The machining process is performed inside a fully illuminated workspace using reliable cutting tools and a high-speed spindle. The design of the machine perfectly dampens any vibrations and oscillations generated during machining, guaranteeing maximum stability during even the most intense challenges. All of this is complemented by the intuitive SIEMENS CNC control, which allows advanced programmes to be created in just a few steps. The offered DECKEL MAHO CNC vertical machining center has worked 20938 hours to date. Technical specifications of the DECKEL MAHO DMC 103 V CNC milling machine - CNC controller: SIEMENS SINUMERIK 810D - number of axes: 3 - feed in the X/Y/Z axis: 10 ...

DECKEL MAHO DMU 50 EVOLUTION CNC machining centre was manufactured in Germany in 1999. The machine designed for precision machining of workpieces, has a high-quality steel construction, equipped with the best components. The machining process of metals is performed on a 500 mm long and 380 mm wide milling centre work table, using a powerful 15 kW spindle, guaranteeing excellent precision and a significant reduction in milling time. The CNC milling machine has 5 axes (X,Y,Z,C,B) with feeds of 500 mm (X axis), 420 mm (Y axis), 380 mm (Z axis), 180° (C axis) and 360° (B axis). A wide range of equipment is offered with the vertical machining centre, including: a control panel with HEIDENHAIN TNC 430 CNC control installed, a capacious tool magazine and a workpiece probe. The total weight of the machine is 6000 kg. Technical data of the CNC DECKEL MAHO DMU 50 EVOLUTION milling centre  ...

DECKEL MAHO DMU 60P CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine with its extremely sturdy construction was designed for the most intensive 5-axis workpiece machining. Inside the large working area, there is, among others, a 24-position tool magazine and an electro-spindle, which rotates at a maximum speed of 12000 rpm. All of this is complemented by an advanced HEIDENHAIN CNC control with an intuitive interface, where machining programmes are created in just a few steps. The DECKEL MAHO milling center has had only one owner to this date. Technical parameters of the DECKEL MAHO DMU 60P milling center - number of axes: 5 - feed in the X/Y/Z axis: 600/650/550 mm - maximum electro-spindle rotational speed: 12000 rpm - minimum electro-spindle rotational speed: 20 rpm - electro-spindle drive power: 15 kW - tool holder: SK-40 - operating hours: 7 ...

Auction 509 / Pos-No.: 52 Designation: CNC High Speed Milling Machine Make: Digma Type: 500GC Year of Make: 2000 Serial No.: 05-180 Description: Travels X/Y/Z - 500/400/350 mm, control, type Andronic 400, 30-fold tool changer, spindle speed 30,000 rpm, travels X/Y/Z - 600/400/350 mm, graphite extraction system, sep. Control cabinet, with cooling, workbench, metal/wood, with base, 8 pull-outs, contents of machine accessories, mobile workbench, wood/metal, approx. 1,200 x 700 mm, 6 pull-outs, contents of machine accessories Good day this item is part of an insolvency online auction. The starting price is € 6,000.00 net (plus 18% buyer's premium, plus gross VAT).

Vertical machining center equipped with glass scales, suitable for high precision machining., In very good condition with only 7200 spindle hours., Available for immediate purchase and delivery., Possibility to inspect the machine under power upon appointment., Please note:, The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection., X-travel: 635 mm, Y-travel: 510 mm, Z-travel: 460 mm, Table surface area: 790 x 560 mm, Cnc Control: iTNC530 Heidenhain, Max spindle speed: 14000 rpm, Rapid trav ...

DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...

Control 840D SL Slimline Multi Touch Technical details x-travel 600 mm y-travel 560 mm z-travel 510 mm Indel: Max. speed 12,000 rpm/-1 Drive power - main spindle 13 / 9 kW Max. torque 82 / 54 Nm Distance between spindle nose and table 120 - 630 mm Workbench: Table clamping area 900 x 560 mm max. table load 600 kg T-slots 5 Working height 850 mm Tool magazine: Number of tool locations 30 pos. Tool holder SK 40 max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 130 mm max. tool length 300 mm max. tool weight 8.0 kg Tool-tool changeover time 2.4 sec Changeover time chip - chip 6.7 sec Feeds: Rapid traverse 30 m/min Feed force 5 kN Feed speed max. 30,000 mm/min Total power requirement 32 kVA Machine weight approx. 5.0 t Space requirements approx. 4.0 x 5.0 x 3.0 m Machine can be demonstrated under working condition. Low service life!  ...

DMG MORI CMX 70 U CNC machining center was built in 2018 in Poland by FAMOT Pleszew Sp. z o.o.. The machine, designed for precision five-axis workpiece machining, is distinguished by the use of reliable components and modern technical solutions. Supported at 4 points, the cast mineral bed, perfectly dampens any vibrations while ensuring proper heat extraction from the workspace. Inside the machine’s large, fully illuminated workspace, there is, among others, a tilting rotary table, a 30-position tool magazine and a reliable spindle with an optimum speed range. In turn, the linear axes (X,Y,Z) use a direct measuring system in the form of measuring scales to achieve the best accuracy and repeatability. All this is complemented by a touchscreen operator panel with intuitive SIEMENS CNC control. All these technical solutions, combined with the extensive range of equipment, guarantee uninte ...

X 600 mm Y 500 mm Z 500 mm B -5 / +110 ° C 360° Spindle 24,000 rpm, 26/16 KW, 100 / 67 Nm, HSK 63 CNC CELOS 60-fold tool magazine 8-fold pallet changer EROWA PH 150-8 (320x320mm) NC - Swivel Table Infrared probes BLUM Laser Inner + outer air cooling Inner + outer coolant device Conveyor similiar to new condition!

Machine name Machining Center Vertical 5 Axis Manufacturer: DMG MORI Model DMU 50 2nd COMPLETE Year of construction 2023 Condition Mint Only 45 spindle hours! Traversing range X-axis approx. 500mm Y-axis approx. 450mm Z-axis approx. 400mm Table 360°x 0.001°, -5°/+110° Workpiece diameter approx. 630mm Workpiece weight max. approx. 300kg Speed max. approx. 14,000 rpm Spindle motor approx. 35 / 25 kW Number of tool positions approx. 60 Rapid traverse approx. 30m/min Mounting cone BT63 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 35 kVA Footprint L x W x H approx. 3.40x2.30(3.20)x2.80 m Machine weight approx. 4,500kg - Spindle 14,000 rpm - Mounting BT40 - Tool magazine 60 - Swivel rotary table with digital drives for automatic 5-axis machining -Conveyor - Internal coolant supply 40bar/600l - Spray gun for chip removal - Ch ...

Machine: Universal Machining Center Model No.: DMU50 3rd Manufacturer: DMGMORI Control: CELOS with Siemens 8400 sl Operate Year of Make: 2022 Location: Germany Options: - Spindle 15,000 rpm - Mounting HSK63 - Tool magazine 60 - Swivel rotary table with digital drives for automatic 5-axis machining - Scales x-y-z -Conveyor - Internal coolant supply 40bar/600l - Spray gun for chip removal - Change of coolant and air bubbles via M-function - Chip flushing - Rotaclear - Probe spindle and table - Electronic handwheel - ATC (Application Tuning Cycle) - Automation interface (Profibus) via M65 - Clamping pneumatics 6bar, 2 clamping circuits This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2021 Location: Germany Specifications Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Equipment - Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - BT 40 Tightening Bolt DIN 69872 - Coolant tank - IKZ pump 20bar - Filters for coolants - Bed flush can be switched via M-function - Coolant spray gun - Spindle blowing air can be switched via M- ...

Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2022 Location: Germany Specifications Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Equipment Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - SK40 - Coolant tank - IKZ pump 20bar - Filter for coolant - Bed flush switchable via M-function - Coolant- Spray gun - Spindle blowing air switchable via M-function - Cab roof - Probe - 4th axis - Tai ...

Used machine Mori Seiki NHX4000 2nd 1 Model No.: NHX4000 2nd Manufacturer:DMGMORI Control: CELOS Mitsubishi Year of construction / commissioning: 2017 / 2018 Specifications Traversing range X-axis approx. 560 mm Y-axis approx. 560 mm Z-axis approx. 660 mm Table 360° 0.001° Workpiece diameter approx. 630 mm Workpiece weight max. approx. 400 kg Speed max. approx. 15,000 rpm Spindle motor approx. 30.7/26/18.5 KW Number of tool positions approx. 60 Rapid traverse approx. 60 m/min Mounting Taper BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 37.3 kVA Footprint L x W x H approx. 2.70x4.20x2.54 m Machine weight approx. 8,500 kg Spindle speed 15,000 min-1, 30.7/18.5kW - BT40 with facing system Tightening bolts: BT-90° - IKZ Preparation - Chip conveyor - Automatic rotary APC with 2 stations - Probe (spindle) - Tool breakage control  ...

Used machine Mori Seiki NHX4000 with Siemens Model No.: NHX4000 Manufacturer:DMGMORI Control: CELOS Siemens Year of construction / commissioning: 2021 Traversing range X-axis approx. 560mm Y-axis approx. 560mm Z-axis approx. 660mm Table 360° 0.001° Workpiece diameter approx. 630mm Workpiece weight max. approx. 400kg Speed max. approx. 20,000 rpm Spindle motor approx. 35/25 kW Number of tool positions approx. 60 Rapid traverse approx. 60m/min Pick-up taper HSK63 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 37.3kVA Footprint L x W x H approx. 2.70x4.20x2.54m Machine weight approx. 8,500kg Spindle speed 20,000 min-1, 35/25 kW - HSK-A63 - IKZ Preparation - Chip Conveyor - Automatic Rotary APC with 2 stations - touch probe (spindle) - tool breakage control system in tool magazine - mobile Control panel - B-axis 0.001 ° - Tool magazi ...

Machine Type: CNC Machining Center Vertical Model: NVX5100 2nd with Matris robot cell Manufacturer: DMGMORI Control:DMG MORI Celos Year of construction / Ib: 2019 / 2022 Location: Germany Specifications Travel range X-axis approx. 1050 mm Y-axis approx. 530 mm Z-axis approx. 510 mm Table size approx. 1,350x600 mm Workpiece weight max. approx. 1,200 kg Speed max. approx. 12,000 rpm Spindle motor approx. 37/22 KW Number of tool positions approx. 30 Rapid traverse approx. 30 m/min Mounting cone approx. BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 45 kVA Footprint L x W x H approx. 3.1 x 2.85 x 2.6 m (without chip conveyor, without robot) Machine weight approx. 7,300 kg Main Drive with Higher Torque - Tool Holder Cone for BT-40 Tool Holder - Tool magazine with 30 places (#40) - Door for tool magazine - Hinged belt conveyor Thi ...

DMG MORI SEIKI DMC 635 V Ecoline CNC machining center was built in 2013. The machine, designed for precision machining of workpieces, is distinguished by its extremely stable construction made of high-quality cast iron, which perfectly dampens any vibrations and oscillations. To achieve the highest precision and accuracy, reliable components in the form of cutting tools and a high-speed spindle are used in the machining process. Tools are changed in a very short time, so that the overall milling time is significantly reduced. The DMG DMC 635 V ECO CNC vertical machining center is offered with a modern touchscreen control panel and integrated chip conveyor. To this date, the machine has only worked for 9069 hours. The DMC 635 V ECOLINE milling center weighs 3900 kg. Technical specifications of the CNC milling machine DMC 635 V ECO - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z ax ...

DOOSAN DNM 4500 CNC machining center was built in 2022 (purchased as new in 2023) in South Korea by DN SOLUTIONS. The machine, designed for precision machining of workpieces with a maximum weight of 600 kg, is equipped with a number of reliable components that ensure uninterrupted operation for many years of intensive production. The machining processes, i.e. drilling, threading and milling, are performed inside a large work area by means of cutting tools and a powerful spindle with direct drive. All this is complemented by the intelligent SIEMENS CNC controller, in which advanced machining programmes are created in just a few steps. Throughout its entire service life, the machine has worked for just 83 hours. The DOOSAN milling center weighs 5000 kg. Technical specifications of the DOOSAN DNM 4500 CNC milling machine - CNC controller: SIEMENS SINUMERIK 828D - feed in the X/Y/Z axis ...

For sale: Powerful Doosan vertical machining center type Mynx 7500/40, equipped with the well-known control system of the Fanuc i-series including Fanuc Manual Guide i dialog area. This model, with a net weight of 13,500 kilograms, has an X, Y and Z axis displacement of 1,525 x 762 x 625 mm each. The table size is 1,600 x 750 mm. The machine is fully equipped with block guides. The pivot shot is an ISO 40 shot. The machine has a so-called arm changer with 32 positions and is also equipped with cooling through the spindle. As an extra, the machine is equipped with an integrated fourth Nikken axle with counter center. The machine also has a right-hand discharge chip conveyor. On request, you can purchase additional tool holders for the machine. The machine is in excellent condition and for more information please send an email to chrismachinematch.nl

DUGARD EAGLE 1000 VMC CNC vertical machining center was built in 2000 in Taiwan by C Dugard Ltd. The machine is used for precision machining of workpieces with a maximum weight of 600 kg. The machining process is performed by means of reliable components that offer the highest quality of manufactured parts for many years of use. Inside the large workspace there is among others a large work table with a length of 1200 mm and a width of 450 mm, a powerful spindle and a 20-position tool magazine. The DUGARD EAGLE 1000 CNC machining center weighs 5800 kg. Technical specifications of the DUGARD EAGLE 1000 VMC CNC milling machine - CNC control: SIEMENS - feed in the X/Y/Z axis: 1020/510/510 mm - feed rate in the X,Y,Z axis: 1-7600 mm/min - rapid traverse in the X/Y/Z axis: 30/30/18 m/min - work table dimensions (L x W): 1200 x 450 mm - maximum workpiece weight: 600 kg - maximum spind ...

Stock number: 3922 PROCESSING Manufacturer: EMCO, Type: MILL E-600 Machines NO.: M-06204707, Year of manufacture: 2007 Specifications: Table size 700 x 500 mm Large table load 500 kg Longitudinal movement (X) 600 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Size distance spindle/table 700 mm Spindle cone 40 iso Stepless spindle speeds 10000 rpm Total power 16 KVA Tool changer 20 places Control Fanuc Oi-MC Fabr. Controlled in axes 3 Operating hours spindle 3167 hours Accessories: Cooling by spindle Chip conveyance. Cooling water system. Length: 2040 mm, Height: 3000 mm, Width: 2500 mm, Weight: 3800 kg

Stock number: 3912 PROCESSING Manufacturer: EXCELL, Type: 810 Machine NO.: ES 8031, Year of manufacture: 0 Specifications: Table size 900 x 480 mm Large table load 400 kg Longitudinal movement (X) 810 mm Transverse movement (Y) 510 mm Vertical movement (Z) 560 mm Size distance spindle/table 700 mm Spindle Taper 40 Iso Spindle motor 9 Kw Tool changer 25 places Control Fanuc OM Fabr. Accessories: Cooling water system. Operating instructions Length: 2200 mm, Height: 2600 mm, Width: 3500 mm, Weight: 5400 kg

FADAL VMC 2016L CNC machining center was built in 1997 in the United States. The machine, designed for precision machining of workpieces, has a large, fully illuminated work area, with automatic tool changer (ATC) and a reliable spindle. Excellent dynamics and feed repeatability are ensured by precision guideways along which the X,Y,Z axes are guided. All this is complemented by the intuitive CNC control where machining programmes are created in just a few steps. All this makes the VMC 2016L CNC vertical machining center the perfect solution for any production facility. Technical specifications of the FADAL VMC 2016L CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 500/400/700 mm - work table dimensions (L x W): 750 x 410 mm - number of T-slots: 3 - maximum spindle rotational speed: 7500 rpm - automatic tool changer (ATC) - maximum tool diameter: 7 ...

FADAL VMC 3016 CNC machining center, built in 1994 in the United States is used for precision machining of workpieces with a maximum weight of 453 kg. The machine, distinguished by its extensive machining capabilities and high productivity, has a large, fully illuminated workspace with a powerful spindle and a 21-position tool magazine. The movement of the X, Y and Z axes along precise guideways results in excellent dynamic and repeatable feed rates. This is completed by an intuitive CNC control with many useful functions, in which machining programmes are created in just a few steps. The VMC 3016 CNC vertical machining center weights 3765 kg. Technical specifications of the FADAL VMC 3016 CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 760/400/500 mm - rapid traverse in the X,Y axis: 18 m/min - rapid traverse in Z axis: 15 m/min - cutting speed in  ...

Spindle speeds up to 10,000 rpm, High-pressure system through the spindle with 15 bar, Tool magazine with a capacity of 21 holders, Chip conveyor belt, X-axis movement 700 mm Y-axis movement 400 mm Z-axis movement 330 mm Max. weight of the workpiece 300 kg Table: Outer length 850 mm Outer width 410 mm The machine is energized.

WE OFFER AN NICE WORKING CONDITION 5 AXIS SIMULTANIUS ROBODRIL WITH COMPLETE TOOLS AND ACCESSORIESS AN NICE OPORTUNETEY . MACHINE IS IN THE PRODUCTION WRKING DAILY ORDERS WITH MACHINE COMES 21X TOOLHOLDERS 1X RENISHAW 1X TOOL TOUCH MEASURING 4-5 axis rotary Machine type: 5AXIS MILLING -SIMULTANIUS Manufacturer: ROBODRILL-FANUC Model: ALPHA-D21L iB5ADV Year of construction:2021 Condition: EXCELLENT (used) Functionality: fully functional Operating hours:4,495 h ON DATE : 20.02.2025 TECHNICAL DETAILS Travel distance X-axis: 700 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 400 mm SPINDLE SPEED: 24.000RPM

FEELER VMP 32 CNC vertical machining center was built in 2012 in Taiwan. This versatile machine with extensive machining capabilities is specially designed for precision machining of heavy workpieces weighing up to 800 kg. To achieve excellent precision and accuracy in machining process, reliable components in the form of the spindle and cutting tools taken from the 22-position tool magazine are utilised. In addition, movement of the X,Y,Z axes is performed on ground rolling guideways, resulting in excellent dynamics and feed repeatability. All machining parameters are programmed in an intuitive CNC control from the renowned company FANUC. The FEELER milling center weighs 5800 kg. Technical data of the FEELER VMP 32 CNC milling machine - CNC controller: FANUC Series 0i-MD - feed in the X/Y/Z axis: 820/520/505 mm - rapid traverse in the X/Y/Z axis: 40/40/30 m/min - work table surfa ...

FEHLMANN PICOMAX 60-M CNC vertical machining center was built in 2006 in Switzerland by FEHLMANN AG. The machine is designed for even the most intensive machining of workpieces with a maximum weight of 300 kg. The machining process is performed inside a large workspace, equipped with, among others, a reliable high-speed spindle and a 24-position tool magazine. Daily work, on the other hand, is facilitated by the installed HEIDENHAIN CNC control, in which advanced machining programmes are created in just a few steps. The PICOMAX 60 M CNC machining center will satisfy even the most demanding customers thanks to its excellent performance and high machining precision. The total weight of the machine is 3350 kg. Technical specifications of the FEHLMANN PICOMAX 60-M CNC milling machine - CNC controller: HEIDENHAIN iTNC 530 - feed in the X/Y/Z axis: 505/355/610 mm - feed rate in the X,Y,Z ...

HAAS UMC-750SS CNC vertical machining center built in 2018 in the United States is used for precision machining of complex workpieces with a maximum weight of 300 kg. The machine features a large work area which includes a direct-drive spindle, a 500 mm diameter rotary tilting table with a precision pilot hole and a measuring probe from the renowned RENISHAW brand. In addition, each tool taken from the 40-position magazine is continuously measured to ensure continuity of the machining process. The UMC-750SS CNC machining center is offered with extensive equipment, which includes e.g. a belt chip conveyor and a perfectly optimised HAAS NGC CNC controller with many useful functions. To this date, the machine has run a small amount of time and has been used for prototyping, tooling production and small batch machining. The HAAS UMC 750 SS milling center weighs 8200 kg. Technical speci ...

HAAS VF-1 CNC machining center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, designed for unit and small batch production, is the ideal choice for any tool workshop. All this is due to the use of a number of modern components with excellent technical parameters, which guarantee high reliability and precise machining. Workpieces weighing a maximum of 1361 kg are machined inside a large, fully illuminated work area by means of a high-speed spindle and tools taken from a 20-position magazine. The machining process is free of vibration or oscillation, thanks to an extremely stable design made from top-quality steel. All this is complemented by an intelligent CNC control with an intuitive interface. The HAAS VF1 milling center weighs 3539 kg. It is also possible to purchase additional tooling shown in the photos (tool holders, vices, TSCHORN 3D tester, measur ...

Haas VF11/40 Vertical Machining Center was installed new in February 2021 and is available immediately., Haas Flagship Model, High Powered Direct Drive Spindle, Excellent condition with Low Spindle Hours, Options Include Renishaw Probe System, Through spindle coolant, Haas HRT450 Fourth Axis, Twin FX7002 Filtermist Units and Powered Doors., All viewings are by appointment only., LOCATION: Leicester (UK), Immediately available., Max Spindle RPM: 8,100rpm, Tool Capacity: 30 (+1), X axis Travel: 3048mm, Y axis Travel: 1016mm, Z axis Travel: 762mm, Table Length: 3048mm, Table Width: 711mm, Spindle Taper: BT40, T-Slot Width: 16mm, T-Slot Center Distance: 125mm, Dimensions: 732 x 305 x 334 cm, Spindle nose to table (max): 864 mm, Spindle nose to table (min): 102 mm

This HAAS VF-2 Vertical Machining Center from 1992 is an excellent choice for users looking for a reliable CNC machine. With a spindle horsepower of 30HP and a maximum spindle speed of 7500 RPM, this machine can handle drilling and milling tasks with ease. It comes equipped with CAT 40 spindle taper, Newer CNC control, and electric power source.

HAAS VF-4 CNC vertical machining center built in 2022 in the USA, is the perfect choice for any manufacturing facility. The machine, which combines functionality, productivity and precision, achieves excellent machining results under even the heaviest loads. This is all due to its extremely stable construction with a large work area, which includes a high-speed spindle, a rotary table and a set of probes for tool measurement and workpiece setting. In addition, in order to fully utilise the machine’s potential and machining capabilities, the installed HAAS CNC controller has been retrofitted with a faster processor and many additional functions. The offered HAAS VF 4 CNC machining center has worked a small amount of time so far and is in perfect condition. The total weight of the machine is 6033 kg. Technical specifications of the HAAS VF-4 CNC milling machine - feeds in the X/Y/ ...

Control System: Fanuc OI-MC Table Working Surface: 29.5 x 20 Table Load Capacity: 1540 LBS Longitudinal Travel (X-Axis): 23.62 Cross Travel (Y-Axis): 20.08 Vertical Travel (Z-Axis): 20.08 Maximum Clearance Table Top to Spindle Nose: 26.1 Rapid Traverse Rate, All Axes: 1181 IPM Tool Storage Capacity: 24 Spindle Horsepower: 17.3 HP Spindle Speeds Range: 0-8000 RPM Spindle Taper: No. 40 CAT (V-Flange) Approximate Machine Dimensions: 118 x 96 Approximate Machine Height: 103 Approximate Machine Weight: 8,500 LBS

HARDINGE BRIDGEPORT DT 480 P3 Stock number 8075228 X-axis travel 18.90 Y-axis travel 15.75 Z-axis travel 16.93 Spindle speed 10,000 RPM Spindle taper BT 30 Tool magazine capacity 20 ATC Control Fanuc Additional axis 4th Axis Ready Coolant Standard Coolant System

Machine make / type HELLER / H 8000 Hours: 5800 Year of Make: 2020 Control: Siemens 840D SL Spindle: EPC unit (8,000 1/min, 60 kW, 1146 Nm) Tool clamping system: SK 50 Magazine / Places: Shelf / 265 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, KF 600, IKZ 70 bar, (working area flushing) Working range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additional options / special features: Holder for MSK attachment heads; Wireless probes Receiver (RENISHAW); Fast drill breakage control (SBBK); Interface suction; Windshield blowing device for service doors; Tool coding; Running control Conveyor; Integrated tool & tool Collision monitoring; 3 colors status lamp; Increased Tool weight 35kg; Scraper belt conveyor for Wet machining; coolant temperature controller; Feed force indicator; Tangential control;

Control: Siemens 840D PL Spindle: 7,000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Cyorjbwuiw Magazine / Places: Chain / 50 Seats Rotary table: 360,000° x 0.001° Coolant system: KNOLL, VRF 250, IKZ 50 bar, (working area flushing) Working range XYZ (mm): 1250 / 1000 / 1000 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additional options: Infrared receiver for measuring probe (BLUM); Multi-spindle head mounting; Fast drill breakage control (SBBK); Codechip WZ; Runtime and quantity recording; IPM; Windshield blow-off device for service door; evasion strategy; Tool planning with MCIS TDI

Travel X-Y-Z 850-700-500 mm Spindle HSK 63, 18,000 rpm, 86/173 Nm, 10/20 KW (100/20%) NC swivel rotary table 440 mm, 450 kg, A +91 / - 139 °, C 360° Equipment: HEIDENHAIN TNC 640 HEIDENHAIN Hand Control Panel HEIDENHAIN Probe HEIDENHAIN electr. Heat compensation BLUM LC 50 Tool Measurement & Fracture Control Dynamic Efficiency (ACC, AFC) Dynamic Precision (CTC, AVD, LAC) KinematicOpt MIMS 36-fold tool magazine ZM 216 Additional Magazine NC – Swivel rotary table Memory module 1 6/3-fold memory Memory module 2 6/3-fold memory Expansion of memory module 1 to 12/4-fold Expansion of memory module 2 to 11/4-fold Sealing air for scales Blow-off device Blowing air through spindle center Internal coolant supply 80 bar with bed flush HS flex: 10 pallets 400x400 mm, 2 pallets 500x400 mm

X-axis movement: 800 mm, Y-axis movement: 600 mm, Z-axis movement: 500 mm, Clamping surface - diameter: 280 mm, Control: Siemens S 840 D. operating hours 104,716, Weight: 8.5T, Dimensions: 2.7x2.21x2.93 m.

Sell our old vertical milling machining center as a spare parts dispenser, unfortunately I can not say what the machine has exactly, I only know that the control unit is defective

Opportunity to purchase a Hurco VM30i 4-axis Vertical Machining Center., This machine is in excellent condition and is available to purchase immediately., Viewing under power available by appointment only., Included:, Hurco 4th Axis, Tooling, Vice, Hurco Trolley, Many software extras, Twin screen option, X axis Travel: 1,270mm, Y axis Travel: 508mm, Z axis Travel: 508mm, T-Slot Size: 5 x 18mm, Max weight on table: 1,800kg, Table surface area: 1321 x 508 mm, Spindle nose to table: 102mm, Max Spindle Speed: 12,000 RPM, Spindle Power: 15 kW, Tool Type: CAT/BT 40, Number of tools: 24, Max tool diameter: 80mm, Max tool length: 250mm, Max tool weight: 7 kg, Rapid traverse: 28 m/min, Weight: 4,320kg, Footprint: 4,086 mm X 3,312 mm x 2,543 mm (L x W x H)