used EDM Machines for sale

Inv. Num. : 7740 Type: AGIECUT 150-HSS Producer: AGIE Created: 1997 Parameters: Control system: AGIEMATIC CF50 Switch-on hours: 75223 h Table dimensions: 560x445 mm Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 200 mm Max. travel length of the Z-axis: 251 mm Feed length in the U-axis (-): 30 mm Feed length in the V-axis (-): 30 mm Maximum workpiece length: 810 mm Maximum workpiece height: 250 mm Maximum workpiece height: 580 m Max. workpiece weight: 450 kg Machine height: 2130 mm Machine length: 2325 mm Machine width: 1620 mm Machine weight: 2900 kg

Inv. Num. : 8066 Type: AGIECUT CLASSIC 2S Producer: AGIE Created: 2003 Parameters: Max. travel length of the X-axis: 350 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 256 mm Maximum workpiece length: 750 mm Maximum workpiece height: 250 mm Maximum workpiece height: 550 mm Maximum table load: 450 kg Machine height: 2305 mm Machine length: 1670 mm Machine width: 2040 mm Machine weight: 2580 kg

AGIE AGIECUT CLASSIC 2S wire EDM machine built in 2004 in Switzerland is used for the production of, among others, precision dies, tools and punches. Workpieces with a maximum weight of 450 kg are machined using electrical erosion, which can achieve complex shapes in even the hardest materials. This process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.33 mm, which is threaded through a special AGIEJET system. The workpieces machined in this way do not require any other secondary processes such as polishing to be undertaken. The AGIECUT CLASSIC V2 wire EDM machine also features an intuitive CNC control with many useful functions. It is possible to purchase the dedicated cooler shown in the photos at an additional cost – price negotiable. The AGIE EDM machine weighs 2580 kg. Technical specifications of the AGIE AGIECUT CLASSIC 2S EDM machi ...

X,Y travel: 14.6 x U,V,Z Travel: 3.9 x 3.9 x 10.2 Max. workpiece size: 29.5 x 21.7 x 10.2 Max. workpiece weight: 880 LB Max. X, Y rapid traverse: 31.5 in/min Motor Drive System AC Servo Motor/Linear Motor Wire Diameter: 0.004 – 0.012 Max. wire feed: 11.8 in/s Wire tension: 0.44 – 5.52 lb taper angle : ±21°/4.33 inches (DA+DB=0.6 inches) Layout (W x D x H) 90.6 x 89.2 x 80.6

Robofil 4030SI-TW Wire EDM Machine Year of manufacture 2001 Technical details on request

Inv. Num. : 8445 Type: Drill 20 CNC Producer: Charmilles Created: 2017 Parameters: Workpiece length: 700 mm Workpiece width: 450 mm Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 200 mm Max. travel length of the Z-axis: 300 mm Maximum table load: 300 kg Machine height: 2040 mm Machine length: 1345 mm Machine width: 940 mm Machine weight: 870 kg

Charmilles Robofil 690, Year of manufacture 2007, Charmilles control, Travel X/Y/Z/U/V 800/600/400/60/60 mm, Conangle +/- 15°, Height 100 mm, max workpiece size 1300 x 910 mm, max. workpiece height 400 mm, max. table load 2300 kg, Tank Dielectric 210 L, Auto. wire threading, Linear measuring systems 0.0005 mm resolution, Generator Isopuls Double,

Inv. Num. : 8050 Type: CM A64C Producer: Chmer Created: 2006 Parameters: Table dimensions: 800 x 500 mm Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 350 mm Maximum table load: 1500 kg Maximum electrode weight: 100 kg Container dimensions: 1350 x 740 x 450 mm Machine weight: 3000 kg

Inv. Num. : 7690 Type: GMS 1012 SP Producer: Désintégr'arc Created: 2019 Parameters: Maximum operating current: 32 A Machine weight: 450 kg

Inv. Num. : 8049 Type: EDM 310 Producer: Exeron Created: 2009 Parameters: Table dimensions: 350 x 550 mm Max. travel length of the X-axis: 310 mm Max. travel length of the Y-axis: 270 mm Max. travel length of the Z-axis: 270 mm Maximum table load: 500 kg Maximum electrode weight: 25 kg Dielectric container capacity: 140 l Container size: 350 x 770 x 520 mm Length: 1500 mm Width: 1760 mm Height: 2200 mm Weight: 1650 kg

A favourable price and quality are not a contradiction at Hanst Tec - after all, there is the FORMAXX Z series. Conventional die-sinking EDM systems designed in such a way that their price enables cost-effective hourly rates, while the technology fulfils all the quality criteria that are typical for Hanst Tec: - easy to operate - reliable Traverse paths: X - 500, Y - 400, Z - 350 mm maximum distance Table - working head: 275-625 mm Workpiece load: 1900 kg The machine is in good condition, and available immediately!

Inv. Num. : 7688 Type: 203 F2 Producer: HITACHI Generated: 2000 Parameters: Control System: MARK-10W Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 170 mm Feed length in U-axis (-): 20 mm Feed length in the V-axis ( -): 20 mm Maximum wire thickness: 0.25 mm Dielectric container capacity: 160 l Max. workpiece dimensions: 450 x 350 x 170 mm Max. workpiece weight: 200 kg Machine height: 1880 mm Machine length: 1525 mm Machine width: 1810 mm Machine weight: 1500 kg

Used starting hole EDM machine Huber Ocean OCT-3525ZA. Start-hole drilling machine built in 2010. A viewing is possible on site at any time. Prior sale and errors excepted.

Year of construction 2002 20-fold changeover C02 Extinguishing System Please note: Dielectric cables leaking, axle module defective.

Table size: 600 x 500mm X: 600mm Y: 300mm Z: 300mm Tool magazine: 12 Tool holder HSK-E 32 Table load max. 1000kg Laser tool measuring gate M&H workpiece measuring probe MEGATOOL palletisation (2 pallets)

Range 2-60mm BROKEN TOOLS QUICK REMOVAL Tap or drill breakage is unavoidable, even with state-of-the-art production. The hard, stuck fragment must then be removed from the workpiece, without the thread or damage the bore. With Kullick EDM machines LE, you can do this reliably and quickly and without having to worry about any special problems. specialist knowledge for this. Product video EDM is carried out by means of arc erosion. In conjunction with the unique KULLICK-EEC control offers an unprecedented level of control. Ease of use, fast EDM, high performance and high duty cycle. The EDM voltages are always below 25 V, are therefore harmless even when touched.

Die-sinking EDM machine HS500E , very good condition, Control Heidenhain Erocom II, 60 Ampere Generator, EROWA Clamping System, 16-fold electrode changer, TFT screen, Handwheel with axle selection, Fire extinguishing system, Touch protection, Operating instructions

Control (Fanuc) MGF 2 Travel x/y/z 300 mm / 250 mm / 250 mm Table length / table width 500 mm / 350 mm Tool changer with 16 positions (Erowa clamping system) Max. workpiece weight 500 kg Dimensions of the machine L/W/H approx. 2.8 m / 2.2 m / 2.3 m Machine weight 4.1 t Accessories: Handheld control unit FPB-ED

Control: Mitsubishi - 64 bit CNC Generator power: 70 amps, multipulse Travel (X, Y, Z): 525 x 400 x 450 mm Work container (W x D x H): 750 x 650 x 420 mm (lifting container) Work table (W x D): 730 x 630 mm Load capacity: 1,000 kg Electrode changer: 20-fold disc magazine Accessories: - CO2 fire extinguishing system, - HSJ technology (High Speed Jump), - integr. cartridge filter system, - MultiProg programming station software Status: completely overhauled Price: On request

Year of construction 2006 Generator 70 Amp - multipulse Control Mitsubishi - 64 bit CNC Travel (X, Y, Z) 550 x 850 x 450 mm Work container (W x D x H) 800 x 1100 x 480 mm Workpiece clamping table (W x D) 760 x 1000 mm Accessories 30-fold plate changer, CO2 fire extinguishing system, integr. cartridge filter system, HSJ technology (High Speed Jump) max. 12,000 mm/min., MultiProg programming station software, Status completely overhauled Price on request

OPS INGERSOLL GANTRY EAGLE 800 Year of construction 2013 EAGLE Powertec PC/NC Controller 3060 22 screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn Quick Programming Powertec Handheld Multifunctional Handheld Controller Manual EDM with Powertec Handheld EAGLE Powertec - Fine Finishing Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disc magazine Work container (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system incl. fire damper Electrode clamping system EROWA ITS ECOTEC Energy Saving Funct ...

OPS INGERSOLL GANTRY EAGLE 1400 Plus Outdated Year of construction 2014 Status: Refurbished Generator power: EAGLE Powertec High Power Generator PT110 (110 Amps) Control: EAGLE Powertec PC/NC Control 3060 EAGLE PC-NC-Dialog 2 x 32 bit 22 screen with touchscreen operation High Speed Jump max. 18 m/min MultiProg Powertec Technology programming on PC/NC Powertec 2 Easy Burn Quick Programming Handheld Control Unit Powertec Handheld - Multifunctional hand control device Manual EDM with Powertec Handheld Ethernet and USB interfaces Integrated C-axis: Measurement resolution 0.001 degrees Electrode changer: EW2/18 Max. head load: 300 kg min. / max. clear width: 300 / 1,200 mm Workpiece clamping table: 1,380 x 2,380 mm (W x D) Load capacity: 10,000 kg (optional 20,000 kg) Travel X: 1,250 mm Travel Y: 2,350 mm Travel Z: 900 mm High Speed Jump max. 18 m/min Integrated c ...

Sodick AP 250 L / Wire EDM machine, Year of manufacture 2011, LP2W control, Travel X/Y/Z/U/V 250/150/120/35/35 mm, Jumbo Feeder, Oil bath machine, External filter system Graushaar, max. workpiece weight 80 kg, Max. Workpiece size 400x270x100, Built-in wire diameter 0.20 mm,

CNC_Automat for machining PCD-tipped tools Very good condition, regular maintenance Machine ready for demonstration

EDM machine for eroding various PCD tools up to 250 mm in diameter and 200 mm in length. Handling with 19 workpiece positions Probes for complete measurement of workpieces Workpiece carrier adaptation A-axis HSK 63 A Tool changer for up to 6 sets of EDM discs Cooling and cleaning equipment for dielectrics Automatic fire extinguishing device Extensive accessories and grips Machine in very good condition. Was overhauled at the factory in 2020 Ready for demonstration

Electrode diameter 0.5 to 3mm Travels 300x400x350mm CE certification proves the best possible safety Complete series in above-ground construction Electrodes Ø 0.5-3mm Travel X-axis 300mm Travel Y-axis 400mm Travel Z-axis 350mm Travel W-axis 300mm Speed C-axis 30-60mm/min Rapid traverse Z-axis 120mm/min Aspect ratio 300:1 Table dimensions 320x440mm max. working current 30A