used End Processing Machinery for sale

Used fiber laser cutting machine BLM LT 9 Combo Fiber An automated device capable of processing closed and open profiles: pipes, square profiles, rectangular profiles and sheets. Basic information Manufacturer: BLM Adgie Year of manufacture: 2011 Power: 3kW The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Additional information - table dimensions: 3000x1500 mm - scope of profile processing: round Ø16÷225 mm square 16x16÷160x160 mm rectangular 16x16÷200x100 mm - Maximum lenght: 6000 mm - maximum cutting thickness of materials: black steel: 20 mm stainless steel 8-10 mm aluminum: 8mm Brass: 5 mm Copper: 5 mm

This roller from Agila has been in the machine storage at Plastima Used Machinery since 2022. The machine is from April 1996 and is in very good condition. – Brand : Agila Roll Mill – Model : LW60/120 – Year of manufacture : 1996 – Working hours : NB

SECOND HAND BUTTER PRODUCTION AND PACKAGING MACHINERY Year of manufacturing: 2008 Condition: Good used condition. - Continuous butter machine Make: AHLBORN 311/1000 Capacity: 1000 kh/hr Gear revised completely in 2018 - hardened gears Exit starts complete changed in 2020 Exit tube 250 gr Exit tube 25 blocks - Rotary forming and filling machine Make: Benhill 8538 Format: 250 gr Exit conveyor: 250 gr - 2 packers from 250 gr to 1000 gr - 4 packs - Mikrofix

We sell 140x Alcatel-Lucent IP Touch 4038 extended edition Ice Blue telephone system 1x Alcatel-Lucent IP Touch 4038 extended edition Black telephone system 1x Konftel 300IP PoE (with PSU) conference system 4x Konftel 300IP PoE (without PSU) conference system 6x Alcatel Lucent OmniPCX Enterprise Small 3EH76020AEJD telephone platform, (each w/ Alcatel OmniPCX MIX 4/4/8 and 1x Alcatel OmniPCX GD-3 Gateway driver) 1x Alcatel Lucent OmniPCX Enterprise Small 3EH76020AEJD enclosure (empty) 3x Alcatel Module OmniPCX BRA2 ISDN Access-T0 expansion board 5x Alcatel Module OmniPCX PRA-T2 ISDN Access-EI expansion board 1x Alcatel Lucent Call Server Processing Unit CS-2 expansion board 1x Alcatel OmniPCX MIX 4/4/8 expansion board 1x Alcatel OmniPCX GD-3 Gateway Driver expansion board In most cases, the entire item can only be handed in completely. More information on r ...

ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 120 Year of construction: 2016 The WP 120 Pharma was specially designed by Alexanderwerk for use in pharmaceutical research and development areas. Designed as a mobile unit, meets the demand for mobility and flexibility in R&D and pilot plant. The control system and the operating unit are integrated in the machine. Process parameters determined for a later production scale can be easily transferred to larger machines. Due to its modular design, the process technology of the WP 120 Pharma can be completely disassembled without special tools; the modular design also guarantees fast changing and cleaning of all working tools and meets the requirements for flexible production. Machinery size Weight (incl. control system): approx. 825 kg Dimensions (HxWxD): approx. 1,635 mm x 1,450 mm x 924 mm Production Minimum product quantities:  ...

Manufacturer: Alfa Laval Model: MRPX214 TGV-74 Function:Whey separator/ Cream separator Capacity: 10,000- 12.500 Litres/ Hou rMotor power:15 kW Electrics: 380V/ 50 Hz/ 3 Phase Bowl speed: 1450 rpm Tools Base PlateNew Control Panel New Water system ( Valves, pressure vessel, connections, etc.) Service Spare Parts : Dairy Machinery UK

Make : Alfa Laval Model : SHL 25 Usage : Milk Homogeniser Bar Pressure : 175 bar Stages : Single Condition : Good Location : Dairy Machinery UK

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

Axis travel X: 2520 / Y: 1550 / Z: 300 Max processing dimension 5040 x 1550 (with repo)

Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall dimensions depressor mm 1400 x 500 x 900 h - Weight kg 100

Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)

Used scribing plate Int. Art. Item no. m3613 Dimensions approx. 1000x750x910 mm Thickness approx. 30/110 mm ribbed Inscription DIN 876/2 Weight approx. 200 kg Item location: 59425 Unna The machine can be visited. We will be happy to send you more photos by e-mail. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition, is non-binding and has been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold from the location / warehouse, with a transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is onl ...

IntNr231085 AR FILTRATIONI S.R.L. ARNO 2 series extraction: Air purifier mechanical AR 5-stage for emulsion mist/oil smoke Air capacity 2600 m3/h (1.5kW) Voltage Frequency 230/400 50 V Hz Noise level dBa approx. 70 Stage 1- Centrifugal condenser, self-cleaning Stage 2 - Knitted metal filter, washable Level 3 - Pocket filter Stage 4 - Fine filter mat, washable Stage 5 - Hepa ultrafine filter Total Unit Filter Capacity: up to 99.97% • Quick and easy maintenance, 1 time per year, high operational reliability • Robust design, small space requirement • Recovery of up to 80% of the condensed coolant • Design and function in accordance with current standards • Energy savings of approximately 415.00 euros per air purifier • Reduction of emissions of 9,000 kg CO2/year/plant • Protection of the sensitive parts of the WZM • Protects the environment and people  ...

Awaiting refurbishment is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 f ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices sh ...

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 25 mm - Injection pressure: 1,800 Bar - Shot volume: 39 cm³ - Working hours: 52,100

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 500-170, Golden Edition, injection moulding machine. Fitted with a 35mm plasticising unit and the Selogica controller. It is one of the most popular machines on the used market and Arburg have done exceptionally well with the combination over the years. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarant ...

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery und ...

Undergoing refurbishment at our headquarters in Northamptonshire is this Arburg 420C 1000-290 injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs o ...

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700

Arburg 470C 1300-350 with 40mm plasticising unit. The ‘C’ variant of machines from Arburg is one of our most popular requests (once refurbished). These machines were market leaders for quite some time and proved reliable and good value for money over the years. With a little refurbished magic from the team to bring them back to ‘almost new’, these machines now have a new lease of life. They might not be the most energy efficient, but they are by no means power hungry and when the low upfront cost is considered with low maintenance costs, it’s a very good value option. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and ...

Make : Armfield Capacity : 40 litres Mixing : Silverson Mixer Processing vessel with cooling Usage : Pasteuriser and mixing vesle Model: FT 40 Make : Armfield Model : FT 75 Usage : Crystaliser Pin mixer Single tube Usage : Margarine and ice cream Make : Armfield Model : UHT Usage : UHT Pasteuriser All in excellent condition came out of university in UK

This conveyor belt from AVIAN is in good condition. The conveyor is in the warehouse of Plastima Used Machinery in Breda, Netherlands. – Brand: AVIAN Transport – Model: Conveyor belt – Engine: Siemens

Baader 1741 fish heading machine Condition: overhauled Designed for heading of cod, pangasius, catfish, tilapia. BAADER 1741 separates the head from the body by two circular knives located at an angle to each other. The head is hereby kept back by a flap thus saving the valuable meat from the neck part of head. At a comfortable working height one operator feeds the fish with the head up into the machine. Supported by the vertical fins on two fish guides, the fish is transported through the machine by two conveyors circulating at a constant speed and equipped with drivers. The two knives than separates the head from the body close behind the collar fins. The deheaded fish falls on a an ascending conveyor belt and is transported to the next processing station whereas the heads leave the machine on a chute at the side. Fish size range: 30 – 70 cm Capacity: up to 40 fish per m ...

Baader 184 is fish filleting machine for processing whitefish. Condition: Refurbished This extensively overhauled machine is specially designed for filleting gutted and headed cod, saithe, and haddock within a size range of 30 to 70 cm in total length (equivalent to 0.3 – 2.5 kg, head and gutted weight). Depending on the fish type, it can also handle fish smaller than 70 cm. Baader 184 incorporates the renowned Baader filleting system, known for its high yield and operational reliability. Additionally, it features an integrated skinning unit for added convenience. Key Specifications: Capacity: 24-40 fish per minute Power Consumption: 10 kW Water Consumption: 25 liters per minute Dimensions: 6.15 x 1.70 x 1.50 meters Weight (Net/Gross): 2550/2850 kg

Baader 185 Fish Filleting Machine is a robust and overhauled machine designed for efficient filleting and skinning of various whitefish species. These are large and medium-sized cod, haddock, saithe, and merluza, among others. Condition: Refurbished Similar to the Baader 184, the Baader 185 features larger guidance assemblies and tools, enabling processing of a wider range of fish sizes. The machine’s working range accommodates fish with total lengths ranging from approximately: 50 to 100 cm (equivalent to 1 – 8.5 kg) for cod 50 to 90 cm (1 – 6 kg) for saithe 50 to 80 cm (1 – 4.5 kg) for haddock Additionally, it can handle de-headed fish: cod measuring 40 to 80 cm (0.8 – 6.5 kg) saithe measuring 40 to 75 cm (0.8 – 5.0 kg) haddock measuring 40 to 65 cm (0.8 – 3.5 kg) Equipped with an integrated skinning unit, the Baader 185 Fish Filleting Machine e ...

Baader 187 Fish Filleting Machine Condition: Refurbished Baader 187 Fish Filleting Machine is overhauled filleting machine presented here is specifically designed for processing small whitefish within a size range of 30 to 55 cm (12″ – 22″). This compact and efficient filleting system offers a streamlined solution for handling these smaller fish. The machine’s speed is adjustable, allowing for a range of 25 to 40 fish per minute, which can be customized to match the operator’s skill level. The production capacity of fillets per hour depends on the average fish size. Lower image demonstrates the exceptional cutting results achieved by the BAADER 187, producing clean fillets with intact belly flaps and minimal wastage. Technical Specifications: Working Range: Small whitefish from 30 to 55 cm Capacity: 25-40 fish per minute Power Consumption: 1.5 kW Water Consump ...

Baader 188 Fish Filleting Machine Manufacturing Year: 1980 Condition: Refurbished Baader 188 is filleting machine is specifically designed for processing whitefish, and it has undergone a thorough overhaul to ensure optimal performance. It is capable of handling whitefish within a working range of 35 to 70 cm in length, which corresponds to a weight range of approximately 0.4 to 2.5 kg. With a capacity to process 27 fish per minute, Baader 188 Fish Filleting Machine offers efficient and consistent filleting operations. It has a power consumption of 2.2 kW, making it energy-efficient. In terms of water usage, Baader 188 Fish Filleting Machine requires a consumption rate of 20-25 liters per minute, contributing to efficient operation. It has compact dimensions, measuring 3.80 x 0.95 x 1.60 meters, and a net weight of 930 kg. Technical Specifications of Baader 188: Work ...

Baader 200 Fish Filleting Machine is overhauled, specifically designed for producing fillets of salmon, trout, and similar fish species. It is well known for its high processing capacity, precision, and reliability. This machine is used in fish processing plants around the world to automate the filleting process, improving efficiency and reducing labor costs. Manufactured by Baader, a well-known German company specializing in fish processing equipment. It efficiently processes both gutted and headed fish, with the option to include or exclude the collar bone. The Fish Filleting Machine ensures that the fish is fed through the tools in a manner that minimizes stress, and guaranteeing a smooth surface on the fillets. In the case of salmon, the machine can produce fillets with or without the collar bone, and with suitable adjustments, it can also process salmon sides while retain ...

The Baader 35 is a processing machine for pelagic fish. It can manufacture the total product line from round fish, such as butterfly fillets, single fillets (with or without skin), fillet pieces (without skin), and nobbed and fried fish products. This machine processes different fish such as herring, salt and herb herring, mackerel, placard, sardine, and trout within a range from 22 to 42 cm in total length. The basic machine can be quickly adapted to the desired product and type of fish through an easy exchange of whole sub-assemblies and components. This line is completed with Baader 484 Autofeeder, Baader 56 Skinner, and a bulk feeder.

Condition: Excellent, fully renovated Baader 417 Fish Heading Machine is specifically designed for heading various species of whitefish, including cod, pollack, haddock, and whiting. It can also be utilized for processing perch and similar fish species. Size range: Suitable for fish with an overall length ranging from 30 cm to 70 cm. Baader 417 can handle up to 40 fish per minute. Water consumption: Approximately 5 liters per minute. Power consumption: 1.87 kW. Electricity: 400 V / 50 Hz. Equipped with a plastic elevating belt featuring dividers. Belt width: 150 mm. Height dividers: 80 mm. Elevating height: 1450 mm. Dimensions (Length x Width x Height): 2160 mm x 885 mm x 1860 mm

Baader 427 V-Cut Heading Machine This high-quality fish heading machine is designed for being used with BAADER filleting machines and tuned to their throughput rate. It heads various types of fish such as haddock sea trout, cod, saithe, and salmon, both bled or unbled, in a particular meat-saving manner. The V-cut is performed directly behind the collarbone. Spikes holding the head, control flaps, and a knife head controlled by the thickness of the fish always make for an optimal head cut. The machine processes a size range from abt. 45 to 95 cm in total length. Fitted with an additional tail cutter, the version BAADER 427 is used for the processing of tuna. Throughput rate as a function of the fish size tuned to the filleting machine Operator requirements: 1 person Power Consumption 2 kW Max. water consumption 10 l/min Dimensions approx. 1,75×1,00×1,95 m Created for shipp ...

Optimal for processing cod, saithe, haddock, and yellowtail, the Baader 444 stands out as the ideal choice for both heading and gutting. Maintaining the collarbone on the trunk, the Baader 444 is particularly well-suited for handling saltfish during the processing. For gutting alone, the heading function can be deactivated. An operator feeds a fish back forward and head to the right into feeding device of a drum and fixed by clamps. Grills device goes down to fish and makes a cut. Shoulder bones do not damage during the cut operation. The drum moves a fish to a knife for trimming a fish belly. Circle knife goes along the shoulder bones and separates it and a membrane from the back bone. After that, during the drum rotation the machine provides cutting of a head. Then a fish move for the gutting operation - crescent knife opens it, and trimming tools removes a viscera from a belly  ...

Baader 517 Filet Transfer Unit Condition: Good, working Designed for processing lines at fish factories (preferable to work with salmon and other salmon species) Working product range: 2-7 kg Capacity: up to 25 fish per minute

Baader 52 DS is in excellent overhauled condition, this deep-skinning machine is specifically designed for efficiently removing the skin, along with the fatty layer between the skin and muscular tissue, using an oscillating blade. The thickness of the cut can be adjusted to meet specific requirements. It is suitable for processing various fish species such as salmon, saithe, merluza, Alaska pollack, and more. With a capacity of skinning 30-150 fillets per minute, Baader 52 DS offers reliable performance. It can be seamlessly integrated with all Baader whitefish and redfish filleting machines, enhancing overall processing efficiency. The power consumption of the machine is 2.0 kW, ensuring energy-efficient operation. It requires an electricity supply of 380 V at 50 Hz. The dimensions of the machine are 2150 x 850 x 1120 mm (length x width x height), providing a compact footprint  ...

Baader 581 is an advanced machine designed for salmon and large fish filleting, emphasizing yield, hygiene, performance, and fillet quality. It's known for its innovative, computerized tools and versatility, making it suitable for various fish species and processing conditions, positioning it as one of the most powerful and advanced filleting machines globally. Fish species/size range: Salmon- 2-7kg (gutted, head on) Salmon trout- 1,8-5kg (gutted, head on) Processing state: headed and gutted Performance: 16fish/min Power consumption: approx. 6kW

Baader 581 Filleting Machine for Salmon Baader 581 Salmon Filleting Machine stands as a pinnacle of innovation in the world of fish processing. Meticulously designed for optimal performance and precision, this machine caters to the filleting needs of salmon and large fish. Acknowledging the influence of various factors on fish quality, the Baader 581 adapts seamlessly to deliver exceptional results. Condition – Machine delivers fully overhauled, serviced and ready to run. Technical Specifications: Noise Management: Adhering to DIN EN ISO 11201 standards for noise measurement. Fish Species/Size Range: Salmon: 2 – 7 kg (gutted, head on) Salmon Trout: 1.8 – 5 kg (gutted, head on) Processing State: Headed and gutted. Machine Performance: Filleting Speed: Impressive 16 fish/min (potential for higher speeds with skilled operators).

CATALOG NO. 7166 TECHNICAL DATA - loading hopper inlet 810x630mm - rotor working width 620mm - main engine 18.5kW - pump motor 0.75kW - number of knives 30 pcs - knife dimensions 30x30mm - 41mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1800x1170x2000mm - weight approximately 1500 kg ADVANTAGES – German production – like WEIMA WL4 – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 47900 PLN Net price: 10644 EUR depending on the price 4.50 EUR Net price: 12605 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer ...

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

We can offer you 5 x Barmag FK6-1000V texturizing machines,manufactured in 2011,240 spindles,with spandex(lycra) device,still working,good maintenance. We machinery dealer of Polymwerization,POY,FDY,DTY,Staple,Nonwoven amd spare parts.

Semi-automatic baler horizontal press 400 Plus is suitable for processing the material to an average of 1 ton per hour. The machine is ideal for industrial plants producing high quality material in the relative small amounts. When the disc presses projecting entirely to the door 400 Plus press produces a very compact bales with dimensions and weight comply with the requirements of the mill. Bale can be completely discharged from the chamber after binding, facilitating switching between materials. Vertical binding system makes the machine is easy to use, quick to bind and suitable for setting along the wall. Technical parameters: dimensions/ size of the baler (height x width x depth)2400 mm x 1750 mm x 4630 mm weight of the baler 5000 kg inlet size (height x width) 820 mm x 930 mm weight of a bale 200 – 400 kg bale wiring wire tape or string number of wires 4 bin ...

Semi-automatic baler, horizontal press 600 Plus provides a throughput of 1,5 tons per hours which makes it perfect for waste processing plants. The machine has a crushing force of 50 tons, the knife cutting off the excessive material in the charging chamber, the floor made of wear-resistant steel, a bale full indicator and a three-phase motor with the power of 15 kW. Optionally, the baler may be equipped with additional devices, e.g.: a tippler for 1000 L containers, cooperating conveyor belt, extra security devices, etc. Horizontal binding system makes it perfect for baling plastic PET bottles and aluminum cans. The whole process of baling, apart from binding, takes place in an automatic cycle. Technical parameters: dimensions/ size of the baler (height x width x depth) 2725 mm x 1435 mm x 5735 mm weight of the baler 6000 kg inlet size (height x width) 1370 mm x 720 mm bale dim ...

Semi-automatic baler, horizontal press 800 Plus provides a throughput of 2 tons per hours which makes it perfect for waste processing plants. The machine has a crushing force of 75 tons, the knife cutting off the excessive material in the charging chamber, the floor made of wear-resistant steel, a bale full indicator and a three-phase motor with the power of 15 kW. Optionally, the baler may be equipped with additional devices, e.g.: a tippler for 1000 L containers, co-operating conveyor belt, extra security devices, etc. Horizontal binding system makes it perfect for baling plastic PET bottles and aluminum cans. The whole process of baling, apart from binding, takes place in an automatic cycle. Technical parameters: dimensions/ size of the baler (height x width x depth) 2805 mm x 1750 mm x 7050 mm weight of the baler 7800 kg inlet size (height x width) 1900 mm x 970 mm bale dime ...

This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Make: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm

This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm

The machines and lines of the SFM series are designed for processing nested containers such disposable syringes. The dosing station is designed to process liquid products using rotary piston pumps. Depending on machine type and equipment, nests are supplied manually or fully automatically. Filling and closing are always fully automatic. The machines are also designed for vacuum-assisted dosing and insertion of plunger stoppers. This virtually eliminates entrapped air when filling disposable syringes with pharmaceutical product

TPC 47 Turbocharger for Caterpillar G 3520 E part number 254-0786 overhauled with original ABB bearing kit with part number from Cat 248-6603 ( standard bearings ) more photo's available on request infoperfectmachinery.nl whatsapp +31653549259

For sale is a used parcel sorter. The Sorter solution consists of a high speed processing system capable of the following: • Ergonomically designed manual induction prep section for 2-operators that will allow Efficient processing: • 5,000 pieces per hour (pph) in barcode reading mode with a single operator. This mode does not require orientation of the product and will be used for the reject processing of parcels back into the Parcel Manager- (extreme pieces must be oriented). • 5000 pph for labeling and OCR mode with two operators. This mode requires the operator to orient and bring the product to the edge. • Automated product gapping with minimal skewing • In-motion weighing and dimensioning Jcg2w8n • Top read, full piece image, omni-directional camera solution with complimentary dual barcode reading and OCR address reading software • High speed linerles ...

Make : Benhil Model : 8304 Format : 25 x 41 mm Volume :6-20 g Capacity : 120 pieces per minute Product Feed : Currently Competition Paper Feed Semi automatic case Packer Condition : Very Good Location : Dairy Machinery UK Contact us for more information