used H-Frame Eccentric Presses for sale

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

ID2934 ABI TM10/12,5 year/Year of construction 1995 hours/hours 10000 Pile driver, ZR20T carrier, with MRZV 500V vibrator, with hydr. Auxiliary winch (tractive force 30 kN), with single tongs and storage frame, very good condition Piling rig, carrier device ZR20T, with vibrator MRZV 500V, with hydr. Auxiliary winch (pulling force 30 kN), with single pliers and storage frame, very good condition

Order No. 6761 TECHNICAL DATA 6 hydraulic cylinders: - 4 upper - 2 side - max. length of glued elements 3100mm - max height of glued elements 1600mm - pump motor power 1.5kW - dimensions length / width / height 4320x1500x1120mm - weight kg ADVANTAGES - unpainted - possibility of gluing in vertical and horizontal position - used press - very good condition PRODUCT FEATURES The press is designed for assembly of all rectangular frame structures, e.g. doors, windows of various dimensions. An additional hydraulic cylinder is responsible for the possibility of gluing in the vertical and horizontal position. Net price: PLN 18 900 Net price: EUR 4021 Net price, calculated at the rate of 4.70 PLN / EUR (with greater fluctuations in the rate, the price may change)

Low-pressure blower GMB 14.8, built 1994, with 11,8 m³/min. volume stream at delta-P = 360 mbar, P1 = 0,64 bar. 44 kW / 1.485 RPM drive, with flow check valve, pressure-limiting valve, tank, air filter, base frame and sound insulation hood.

Mobile pneumatic conveyor unit for powdery products, on base frame, with stainless steel feeding hopper (700 mm x 700 mm, incl. safety grid inside), blow-through rotary vane in stainless steel (200 mm Ø, 0,55 kW drive) by Seeger, Aerzener GMA-blower incl. Drive, air filter, compensation tank and switchgear cabinet.

AFT buttering machine Stainless frame, twin lane, lane width 125mm, overall length 1600mm, 3Ph, mobile

AFT Single shot depositor Mini depositor Serial: 101001-01 2010, Stainless height adjustable frame, 25Kg hopper, fill range 10g - 100g, mobile, 1Ph

AFT Sandwich cutter Serial: 135012 Stainless frame, automatically cuts sandwiches into halfs, ensures clean and centered cut on all types of sandwiches, belt width 150mm, overall length 2200, mobile, 3Ph

AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

AFT Single shot depositor Stainless height adjustable frame, 25Kg hopper, fill range 25g - 100g, mobile, 1Ph

2G Agenitor 406 BT70 CHP ready for connection, electrical efficiency is 42.5%. New in original packaging, with warranty. Natural Gas, Hydrogen Ready. Electrical power - 250 kW Thermal power - 264 kW Make and Model: 2G agenitor 406 BT70 Fuel: Natural gas Year - 2022 Hours: 0 Capacity: 250kW V: 400 HZ: 50 Scope of supply: Engine, Alternator, Frame, Gas Heat Exchanger, Oil Tank, Gas Train, Separate Cabinet with Control System and Operating Unit. Documentation.

Complete Containerised 2G Agenitor RO4 Biogas Genset Year: 2017 Capacity: 84kW Hours: 318 HZ: 50 V: 400 Scope of supply: Complete Containerised Unit including: Engine, Alternator, Base Frame, Control Panel, Circuit Breaker, Radiator.

AGEO SP 60 / 1000 Four Column Hand Screw Press -Built in 1998 -CE - Identifier -Compressive force 60 tons -Four - Leadership Columns -Hydraulic return stroke Xoz33Bs7Y -Clear width between the columns 1000mm -Grooving table 900x700mm -Height clearance max. 415mm Dimensions: LxWxH 1.8x1.6x2.5 meters / Weight 3.5 tons

Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4410 10” Stroke 33” Shut Height 36” x 36” Bed 80 Strokes Per Minute Partially Rebuilt Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4621 10” Stroke 32” Shut Height 36” x 32” Bed 80 Strokes Per Minute Bolsters are included. Both presses are in working condition and under power.

Three separate oil coolers mounted in steel frame. Motors data: 380-420 / 660-720 V, 1460rpm, 11kW - 3 pcs

AKW Engineering Ltd Compact Spiral Freezers Currently building 4 bespoke compact freezers, using reconditioned top quality stainless steel framework. All belts are 510mm wide. Units are constructed on a hot dipped galvanised sub-frame, for easy transportation and relocation. All with new insulated enclosures and doors. Wiring and all serviceable components are new. All with built in belt wash spray bars. Choices of freezing capacities, evaporators and refrigerants.

Inv. Num. : 7884 Type: 1700 Producer: ALCI Created: 1999 Parameters: Max. material width: 1600 mm Cutting thickness: 0.015 - 4x0.170 my Maximum product length: 4000 mm Equipment: Punching function

Aleanderwerk KN 20 Zwilling Combination machine consisting of bowl cutter and meat grinder Bowl cutter with 20 l bowl volume Knife head with 3 pcs. included Two cutting speeds: 1. 1500 RPM. - 2. 3000 RPM. Stainless steel bowl Including thermometer for temperature indication Meat grinder 82 mm diameter Two grinding speeds Including brand new cutting set Machine sits on a movable frame with 4 rolls

Stock number: UG6204 Second hand, refurbished, stainless steel plate heat exchanger by Alfa Laval type CLIP 6-RH (C6). Plates designed in stainless steel AISI 316L. Working volume 68.2 l. Working pressure 16 bar, test pressure 21 bar. Working temperature in range from 0 up to 110 C. Connections are DIN 11851 DN50. Exchanger is mounted on stainless steel frame. Gaskets designed in NBR, mounted without a glue, type clip-on. Unit is cleaned and leak tested. Last time used on food. Includes stainless steel covers.

Decanter Alfa Laval Foodec 700 in excellent conditions. Control Panel not included Decanter Foodec 700 Yr : 2012 Description Bowl : 2 or 3 phase version: 2 phases - open Maximum main speed: 3100 rpm Bowl length: 2565 mm Bowl diameter: 650 mm Beach angle: 20° Solids discharge type: 360°-type with 8 wear liners Solids discharge radius: 175 mm Wear protection solids discharge: Wear liner in tungsten carbide, 8 pieces Solids transportation aids, cylindrical section: Ribs Solids transportation aids, taper section: Ribs Material - hubs: AL 111 2329 (Duplex stainless steel) Material - bowl shell: AL 111 2329 (Duplex stainless steel) Material - bolts: A4-80 (AISI 316) Liquid outlet, type: 8 Standard Plate Dams Conveyor : Features: Windows / Double cone Feed zone type: Esbjerg with exchangeable wear liners (EU3) Pitch: 1x230 mm Flight inclination: Perpend ...

old, but very good Alpine A 250 B mill, drive: 5.5 Kw., mounted on frame, with motor circuit breaker, ready for use. old, but very nice Alpine A 250 B Mill, motor 5.5 Kw., frame mounted, ready for use

CIRCULAR SAW model ALTENDORF F45 with 2 axes by CNC second hand machine in excellent working condiiton CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control electric movements of scoring unit , from the control panel technical data : anodized aluminum carriage mm. 3000 max.diam. blade ( with scoring blade ) mm.350 max.diam. blade ( without scoring blade ) mm. 450 blade rotation speed g/min.3000/4000/5000/6000 with scoring unit : Yes blade group inclinable at 45° cutting width on the parallel guide mm.1350 main saw blade . motor power 7.5 Hp scoring unit motor power Hp 1 machine equipment: aluminum telescopic rod n.01 DIGIT L digital disp ...

CIRCULAR SAW Mod ALTENDORF F45 machine suitable for cutting plastics and solid wood CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3400 max. blade mm.500 blade group inclinable at 45° max. cutting height with 90° blade = mm.175 max. cutting height with blade at 45° = mm.123 saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended bridge protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1100 Volt. 380/50 Year 2003

Capacity: 17 tOpening maximum: 150 mmWorkpiece height maximum: 100 mm Make Amada FIMAU 17 Type FIMAU 17 Year 1996 Never used Horizontal bending machine Outside diameter max. (mm)Table L = 640 Inside diameter max. (mm) Table W = 540 Max. pipe length (mm)Stroke = 150 Max. angle Force = 17 T Wall Thickness (mm)Speed 17 mm/S Die Height = 100 Manuel stop Never used !

Control: Retrofit with Step 12 unit Distance between frame: 2200 mm Stroke: 100 mm Open height withtout holder: 250mm Throat depth: 400 mm Working height: 1030mm Bending speed: 7 mm/sec Approach speed: 77 mm/sec Return speed: 76 mm/sec Dimensions (LxWxH): 2930 x 1595 x 2380 mm Weight: 6200kg X1, X2 and Y axis

Hydr. CNC Press Brake AMADA 3m, 100 ton without tools !

Viewing: 09.04.2025, 10 a.m. - 2 p.m. LEKO Metalltechnik GmbH Connecting road 2 18184 Roggentin Auction 520 / Pos-No.: 87 Designation: hydr. Press brake (surcharge subject to change) Make: Amada Type: HFE 3i 1704 8 axles Year of Make: 2019 Description: Masch.-Nr. HFE 31 1704 I100511, max. pressing force 1,700 kN, max. stroke 200 mm, weight 13,900 kg, power consumption 22 kW, rated current 35.3 A, incl. tool set -> award subject to the consent of the collateral creditor. This item is part of an insolvency online auction.

4-axis press brake Machine in very good condition Capacity: 2000 x 50 T With tools Price on request For more information, please contact.

Offer 25224 Specifications: - Max. working length 2550 mm - Column passage 2125 mm -Max. Pressing force 80 t - Projection 420 mm - Max. stroke 200 mm - Max. installation height 450 mm - Table height 960 mm - Table width 60 mm - Feed speed / rapid traverse 1 - 100 mm/s - Press speed 1 - 10 mm/s - Retraction speed 1 - 100 mm/s - Drive power 9 kW - Space requirement approx. W 3400 x H 2580 x D 1970 mm - Weight approx. 5.8 t - with: - 8 axis control AMADA - CNC backgauge AMADA -Light barrier - Deerfoot Tool + V – Die Tool - E. footswitch

Control Amada Thrust... 50t Bending length ... 2085mm controlled axes ... 4 Drive... Hydraulic Machine weight ... 4700kg The machine is in good condition, possible to test under power.

Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.

Press brake AMADA HFT 80-25 model. Year 2008 800 kN

Viewing: 09.04.2025, 10 a.m. - 2 p.m. LEKO Metalltechnik GmbH Connecting road 2 18184 Roggentin Auction 520 Pos-Nr.: 86 Designation: hydr. Press brake (surcharge subject to change) Make: Amada Type: HRB 1003 Year of Make: 2022 Serial No.: HRB 1003 HRB100094 Description: Press force max. 1,000 kN, max. stroke 250 mm, weight 7,200 kg, noise level 72 dB, power consumption 18.6 kW, with 8 axes, incl. tool set for press brake, with tool cabinet (item 88), 5 pull-outs, contents of various tools for press brakes -> award subject to the consent of the collateral creditor. This item is part of an insolvency online auction.

Hydraulic CNC press brake Amada type HFT 170-4 L, 400 V, 16.5 kW, Weight 14,600 kg, Shelves with accessories

Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall dimensions depressor mm 1400 x 500 x 900 h - Weight kg 100

Stock# U2308-10 Used stainless steel (316) vertical basket centrifuge by Ametek/Tolhurst Centrifugals (USA) type Batch-Master model B-M with perforated bowl size 48 (1219,2 mm) diameter x 30 (762 mm) height. Machine is designed for periodical work with automated discharge of cake. Working rotation of bowl from 0 up to 1080 rpm. Top feeding, bottom discharge. Machine is mounted on carbon steel supporting frame. Bowl is driven by hydraulic device with power 30 kW, 1470 rpm, 380 V, 50 hz, design Ex. Included control panel and stainless steel conical chute.

Andrin Electric Magnet Strap Brand: Andrin Length frame A.A.= 2600 mm Belt width : 1200 mm Drive: 2.2 kW slip-on gearbox Block : 1800 x 1250 x 450mm Power requirement : 7.3 kW Inclusive rectifier

Andrin Electric Magnet Strap Brand: Andrin Length frame A.A.= 2500 mm Strap width : 800 mm Drive: 2.2 kW slip-on gearbox Block : 1900 x 800 x 400mm Power requirement : 3.8 kW Inclusive rectifiers.

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

Apple 15 head depositor Model: CCP12 Stainless cantilever framed 15 head machine

Apple Engineering Four head pneumatic depositor Model: MD Serial: MC13611 four head depositor, individual controlled heads, on mobile height adjustable frame

Aprovis FriCon Gas Dehumidifier and Desulfurizer Plant for cleaning Biogas. Biogas cleaning plant including APROVIS FriCon 150/500-40-15-2-I0 Gas Dehumidifier and Desulfurizer Plant. Type: ESA 44,8m³ Year: 2019 Fuel: Biogas Scope of supply: Gas Cooler, Air Cooled Liquid Chiller, Base Frame for Gas Dehumidifier, Insulation, Demister DN 200, Syphon. Technical data for Desulfuriser Plant: >3.000 mg/m 3 H 2 S and 600 Bm³/h Gas flow: 600 Bm³/h (at around 37-40 o C) H 2 S-Input concentration: 2.000 ppm (3,000 mg/m³) Gas temperatures (entrance): 25-40 o C H 2 S load: maximum 1.800 g/h Columns pressure loss: < 3-8 mbar Pressure level: 45 mbar (Test pressure 50 mbar) Low pressure: maximum –10 mbar. Minimum inlet pressure: 2-4 mbar Hot water: DN=32 Dung use: app. 3,0 kg per day full load (approx. 110-115 Ct costs 1 kg) Extra air: 11-14 % Container/tank size: approx. ...

This flash pasteurizer was manufactured by APV in year 2005 for eliminating harmful microorganisms from beer before packaging. Pasteurizer is completely built on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using low pressure steam for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a heat exchanger, holding / pasteurization tube, control cabinet, pumps, pipes, valves and instruments all built on stainless steel frame. Technical Characteri ...

APV/ N35-RUS-10/ 8-10m3/h/1999 Flash pasteurizer for juices for example with pipe hot holder, tank, pumps etc. and control mounted on frame used, sold as it is, where it is, price ex location

APV/ N35-RUS-10/ 8-10m3/h /1999 Flash pasteurizer for juices for example with pipe hot holder, tank, pumps etc. and control mounted on frame used, sold as it is, where it is, price ex location

Inv. Num. : 8438 Type: AF-200-75 Producer: Arisa Generated: Parameters: Maximum retraction speed: 200 t Top table length: 950 mm Top table width: 750 mm Maximum number of strokes: 20 1/min Ram stroke: 250 mm

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

Manufacturer: ASEPTO GmbH (Germany) Refurbished in 2021; new PLC in 2022 Capacity: up to 5.500 l/h with APV Gaulin high pressure pump, capacity up to 7.000 l/h Brand new control cabinet with S7 PLC Mounted on stainless steel frame for easy reinstallation

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air r ...

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air r ...