used Milling Machines for sale

x-travel: 300 mmy-travel: 135 mmz-travel: 300 mmspindle turning speed range: 100-2000 U/mintable-size: 590x210 mmweight of the machine ca.: 0.6 tDigital read-out 3 axeswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General: Travel X/Y/Z 800/800/600 mm Speed 18,000 rpm Tool holder HSK 63 Spindle: Motor spindle technology Speed 18,000 rpm Tool holder HSK 63 NC swivel rotary table: A-axis +/- 120° Technology Direct drive (2x torque motors) C-axis 360° Technology Direct drive (1x torque motor) Clamping surface 630 mm Table load max. 1,000 kg Tool magazine: Technology 2x chain magazine Tool Changer Pick-Up Number of stations 66 (2x 33) pieces Equipment / Accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system, 40 bar Tool Measurement Tool Probes Workpiece Measurement Infrared Probes Emulsion Mist Separator Mechanical Setup operation Electronic handwheel

General: Control Heidenhain TNC 640 Travel X/Y/Z 650/650/500 mm Speed 12,000 rpm Fault circle swing bridge 800 mm Rotary function 800 rpm, 300 kg Spindle: Motor spindle technology Speed 12,000 rpm Tool holder HSK-T63 Spindle clamping rotation function NC swivel rotary table: A-axis +/- 120°, 0.001° resolution Drive tandem, 2x torque motors C-axis 360°, 0.001° resolution Drive 1x torque motor Clamping surface 470 mm Rotary function 800 rpm Table load max. 300 kg (500kg) Tool magazine: Technology Chain Magazine Tool Changer Pick-Up Number of stations 63 pieces Equipment/ Accessories: Rotary function 800 rpm Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system, 40 bar Tool Measurement Tool Probes Workpiece Measurement Infrared Probes Emulsion Mist Separator Mechanical Setup operation Electronic han ...

Route control TNC 128 Travel X 400 mm Travel Y 315 mm Travel Z 350 mm Table size 710 x 315 Mounting ISO 40 (DIN 2080) Distance table and spindle nose 100-450 Speed 3000 rpm Drill quill stroke: 80 mm Ball screws on axes Rapid traverses X,Y,Z 5 , 5 , 2.5 (m/min)

Control Heidenhain TNC 640 Speed [rpm] 15000 Travel X/Y/Z [mm] 800/900/620 Tool pick-up HSK-A63 Spindle: Technology Direct Drive Speed 15,000 rpm Tool holder HSK-A63 NC swivel rotary table: Technology Swivel rotary table with torque drive, Fabr. Kessler A-axis +/- 120° C-axis 360° Clamping surface ø800 mm Table load (max.) 1,000 kg Workpiece dimensions (max.) ø800 x 500 mm General: Tool magazine 2x chain magazine à 32 stations Rapid traverse in X/Y/Z 48 m/min Equipment/accessories: Direct displacement measuring system (glass scales) in all axes Chip Management Chip Conveyor Coolant management IKZ system with filter and high pressure, 18 bar Workpiece Measurement Probe, Heidenhain TS 740 Tool Measurement Laser, BLUM Setup operation Electronic handwheel Other equipment spindle coolers

Control Siemens 828 D - ShopMill Speed [rpm] 12000 Travel X/Y/Z [mm] 1000/600/650 Tool pick-up SK 40 Spindle: Technology In-Line Direct Drive Speed 12,000 rpm Power 20 kW Torque 176 Nm Tool holder SK 40 General: Tool magazine 40 stations Rapid traverse X/Y/Z axis 36/36/32 m/min Equipment / Accessories: Chip Management Hinge Belt Conveyor Coolant management IKZ system, 20bar Coolant Cleaning Oil Separator Control cabinet temperature control air conditioning unit Workpiece Measurement Renishaw OMP 40 Setup operation Electronic manual

Benz WSX15 angle milling head as good as new with SK50 mount N1 Max: 4,000 1/min M1 max: 450 Nm P max: 70 bar Manufacturer: BENZ Tooling Year of manufacture: 2023 Category: Angle Milling Head SK 50- HSK 63

2012 BG-CAM Pro 2030 ATC Machine name: BG-CAM Pro 2030 ATC Procurement date: June 6, 2012 Machine type: portal milling machine - flat bed Control: Fagor 8055 Processing area: X approx. 3000mm | Y approx. 2000mm | Z approx. 300mm Machine table: 6-zone vacuum high-pressure table Spindle: HSD spindle | HSK 63 F | Max. speed: 24,000 rpm Electrical connection: see picture in the appendix. In 2021, various things were renewed. Such as, for example, Y-axis guide shoes, Y-axis bearing group, Y-axis driver bearing including gear and the Y-axis toothed belt. Measurement of the milling machine using a laser interferometer including storage of correction tables. The spindle was repaired at the end of 2018, has been around for a few years now and it shows. A repair is recommended there. Find more here - / Contact us at -

Control Siemens 840 Dsl Speed [rpm] 20000 Travel X/Y/Z [mm] 660/660/500 Tool pick-up HSK-A63 Spindle: Motor spindle technology Speed 20,000 rpm Tool holder HSK-A63 NC swivel rotary table: Technology Swivel rotary table with torque drive B-axis +/- 120° C-axis 360° Clamping surface ø468 mm General: Tool magazine 60 stations Rapid traverse in X/Y/Z 75 m/min Equipment/accessories: Direct displacement measuring system (glass scale) in all axes Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure Workpiece Measurement Probe, BLUM TC 52 Tool Measurement Pushbutton, Renishaw RLP 40 Other accessories Rinsing gun

x-travel: 560 mmy-travel: 270 mmz-travel: 340 mmtable surface area: 1000x230 mmtool adaptor: SK40 total power requirement: 4 kWweight of the machine ca.: 1,5 trequired space: 1,5 x 1,5 x 1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refurbished lid FP 1 for sale. - 3-axis digital display - Cooling/lubrication pump in the machine base - Overhauled 2024 - Incl. tool table and machine vice If you have any questions, please: 01728101136

Fully functional milling machine Deckel FP 1 We would like to point out that this machine is in excellent technical and well-maintained condition for its age (due to the IATF certification). Regular maintenance is already required on the basis of the certification and the machine therefore works 100% perfectly. The machine is still energized and can be viewed and tested at any time. All maintenance logs are in place. The machine will have to leave the hall in the first quarter of 2025. This means that the machine could remain energized until mid-March 2025 to demonstrate it under power. Of course, the machine would also be available immediately. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your answer and interest in advance.

x-travel: 300 mmy-travel: 200 mmz-travel: 340 mmSpindle Speed: 40-2000 U/min.weight of the machine ca.: 650 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 400 mmz-travel: 300 mmtable-size: 440 x 1000 mmspindle taper ISO: 40 turning speed range: 40 - 2000 U/minfeed range: 8 - 400 mm/minrapid traverse:: 1200 mm/mintotal power requirement: 2,2 kWweight of the machine ca.: 2,0 tdimensions of the machine ca.: 1,7 x 1,6 x 1,8 mTool milling machine- 3-axis digital display- SK 40 tool holder- Long bedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 150 mmz-travel: 340 mmtable-size: 600x260 mmspindle taper ISO: 40 spindle turning speed range: 40-2000 U/minweight of the machine ca.: 700 kgVisit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deckel FP2 Milling Machine Power: 2.2 kW RPM: 40-2000 Inner taper: ISA 40 Clamping surface: 830x240 Heidenhain Digital Display Machine is in a very neat condition and can be viewed under power.

Machine : Vert. Head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, DECKEL, of FP3, SK40, with quill stroke 80mm, tool clamping with hydraulics and control panel. swivelling, price: 1200,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1200,- Would also have milling spindles - SK30 - SK40

Nice machine, but parts of the controls are missing. Mechanically very good condition Sell spare parts or complete machine ! Table, milling head, guides, spindles, measuring rulers, motors, electrical parts, control panel, ... or to convert to new control !

x-travel: 500 mmy-travel: 400 mmz-travel: 450 mmturning speeds: 31,5 - 1600 U/mintool taper: SK 40 quill stroke vertical: 80 mmdiameter of quill: 80 mmtable:: 1000 x 850 mmtotal power requirement: 4,0 kWweight of the machine ca.: 2,6 tdimensions: 2,1 x 1,7 x 1,7 mUniversal tool milling machines- Digital display- Angle table- Coolant system- Machine feetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dear Ladies and Gentlemen, we sell our machine Deckel FP4 NC and associated div. milling cutter chucks. Please see the photos for details. The machine is energized and can be viewed at any time.

Milling machine Manufacturer: Lid Type: FP4A Year of Make: 1989 Control: Dialog11 lid Travels: X/Y/Z: 560 x 500 x 450 mm

Milling machine DECKEL FP5NC -axis: X-710 Y-600 Z-500

Milling machine Deckel FP5NC Tool holders can be added by arrangement. The machine ran without problems until the end. Machine documents are complete as far as possible. Programming instructions are included. Since the machine has been replaced by a new one, it is for sale.

Milling machine Manufacturer: Lid Type: FP5NC Year of Make: 1985 Control: Lid Dialog 4 Travels: X/Y/Z: 710 x 600 x 445 mm

x-travel: mmy-travel: mmz-travel: mmweight of the machine ca.: 1.700 kgdimensions: 2000 x 1000 x 1950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain TNC 426 Speed [rpm] 9000 Travel X/Y/Z [mm] 500/400/400 Tool pick-up SK40 Spindle: Speed 9,000 rpm Power 13 kW Torque 82 Nm Tool holder SK40 Workbench: Technology Manual Swivel Rotary Table Clamping area ø700 x 500 mm Table load (max.) 200 kg General: Tool Magazine 16 Stations Rapid traverse in X/Y/Z 12 m/min Equipment/accessories: Chip management chip tray Coolant Management KSS Pump Setup mode 4 Other equipment Workroom light Note: Shown clamping devices and tools are not Part of the offer.

x-travel: 800 mmy-travel: 700 mmz-travel: 600 mmControl: total power requirement: kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine : Vert. Head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, DECKEL, of FP3, SK40, with quill stroke 80mm, tool clamping with hydraulics and control panel. swivelling, price: 1200,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1200,- Would also have milling spindles - SK30 - SK40

DMG MORI Machining Center Model : CMX 70 U Year of Manufacture: 2022 Spindle Speed: 12,000 max. 1/min Weight: 7,800 kg Power Supply Specifications: - Power Input (kVA): 30 kVA - Maximum Current (A): 47 A - Voltage (V): 400 V (+10%) - Frequency (Hz): 50 Hz - Control Voltage (AC/DC): 230 V (AC), 24 V (DC) - Short Circuit Capacity (kA): 0.63 kA - Maximum Voltage (V max.): 440 V Find more here - / Contact us at -

2019 DMG MORI CTX 800 TC Find more here - / Contact us at -

Control Siemens 84 0Dsl - Operate Speed [rpm] 18000 Travel X/Y/Z [mm] 735/650/560 Tool pick-up HSK-A 63 Spindle: Motor spindle technology Speed 18,000 rpm Power 35 kW Torque 111 Nm Tool holder HSK-A-63 Media Feedthrough KSS + Blown Air NC swivel rotary table: A-axis +/- 120° C-axis 360° Speed 1,000 rpm Clamping surface 680 mm Table load 500kg Laser: Laser Lasertec 65 3D Laser Type Fiber Guided Diode Laser Power 2,500 watts Focusing lens, 200 mm focal length Processing nozzle 3 mm spot diameter Cooling water-air cooling unit with 6 kW Windows 2x laser safety windows Equipment/accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system, 40 bar Workpiece Measurement Infrared Probes Tool Measurement BLUM Laser Emulsion Mist Separator Mechanical Kinematics Measurement 3D quickSET Setup opera ...

Condition: used, ready for use Year of Make: 1965 Retrofit: 2006 Control: Heidenhain TNC 124 Travel X/Y/Z: 1,600 / 700 / 650 mm Main spindle: SK50 / max. 1,000 rpm / 11 KW Spindle head: swivel 45° left + right, quill 180 mm Space requirement W/D/H: 3,200 / 1,800 / 3,500 mm Weight: 12,500 kg Accessories: Various SK-50 mounts and cutter heads up to Ø300

Workspace: Travel in X/Y/Z 300/200/350 mm Distance spindle nose table 80 – 430 mm Rapid traverse 1200 mm/min Working feed X/Y/Z manual 50-550 rpm Feed force in X/Y/Z manual kN Clamping surface (rigid angle table) 600 x 200 mm Max. table load (rigid angle table) 50 kg Vertical milling head: Speed range 80-2200 rpm Power 1.4 kW Tool holder SK30 Dimensions: Length x width x height 1150 x 1410 x 1550 mm Weight approx. 500 kg

The Fadal 907 VMC 6030 is a specific model of a vertical machining center (VMC) manufactured by Fadal Engineering. VMCs are widely used in the machining and manufacturing industry for tasks such as milling, drilling, and precision cutting on materials like metal, plastics, and composites. Find more here - / Contact us at -

X-axis: 775 mm Y-axis: 250 mm Z-axis: 425 mm Table dimensions: 1,100 x 240 mm Spindle Holder: ISO-40 Spindle speeds: 48 - 1,500 rpm Feed X/Z axis: 12 - 280 mm/min. Digital reading: Heidenhain on Y/Z axis Equipped with: - Milling protection - Coolant device Country of origin: Spain Motor power: 3 kW Machine LxWxH: 160 x 130 x 160 cm Machine weight: 1300 kg

FPT LEM 2.5 Milling machine Swivel head with horizontal spindle, vertical spindle with quill, SK40 Travel X2000 Y639 Z1000 Selca S1200 control system Year of manufacture 1990 various accessories Find more here - / Contact us at -

GOMAD FG-2 TOP SPINDLE MILLING MACHINE – year 2016 SPINDLE ROTATION 6000 - 18000 RPM. VERTICAL TRAVEL OF SPINDLE 125 MM VERTICAL TRAVEL OF TABLE 150 MM DISTANCE OF SPINDLE AXIS FROM THE BODY 760 MM HEAD TURNING ANGLE +45° -45° TABLE DIMENSIONS 1180 X 700 MM ELECTRO-SPINDLE SOCKET ER 32 BUSHING RACK COLLET FOR BURRS 01 -020 ELECTRO-SPINDLE 5.6 KW REQUIRED AIR PRESSURE 0.6 MPA DIAMETER OF SAWDUST EXTRACTION NOZZLE 80 MM SAWDUST AIR VELOCITY 25 M/S COOK 750 KG Find more here - / Contact us at -

Control Heidenhain TNC 640 Speed [rpm] 18000 Travel X/Y/Z [mm] 600/855/805 Tool pick-up HSK 63 General: Year of construction 2015 Control Heidenhain TNC 640 Travel X/Y/Z 600/855/805 mm Spindle speed 18,000 rpm Tool holder HSK 63 Spindle: Motor spindle technology Speed 18,000 rpm Power max. 39 kW Tool holder HSK 63 Media Feedthrough Compressed Air + Coolant NC swivel rotary table: A-axis -185°/+45° B-axis 360° Direct displacement measuring systems Tool magazine: Disc magazine technology Tool Changer Pick-Up Number of stations 40 pieces Equipment / Accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply I IKZ plant Coolant Supply II Minimum Quantity Lubrication Tool Measurement BLUM Laser Workpiece Measurement Infrared Probes Setup operation Electronic handwheel Tool coding system Balluff Kinema ...

Control Haas Speed [rpm] 12000 Travel X/Y/Z [mm] 3073/1549/622 Tool pick-up SK40 Spindle: Speed 12,000 rpm Tool holder SK40 Workbench: Clamping area 3,099 x 1,346 mm Table load (max.) 2,722 kg General: Tool magazine 20 stations Rapid traverse in X/Y/Z 20/53/27 m/min Equipment/accessories: Coolant Management KSS Pump Workpiece Measurement Probe, Renishaw OMP40-2 Tool Measurement Pushbutton, Renishaw OTS Setup operation Electronic handwheel Equipment/accessories: Coolant Management KSS Pump Workpiece Measurement Probe, Renishaw OMP40-2 Tool Measurement Pushbutton, Renishaw OTS Setup operation Electronic handwheel

Milling machine in very good condition and only 2075 power on hours with even less actual cutting hours., Ready for immediate delivery., Can be inspected under power upon appointment., Full technical specifications in the attached document., The TM Series Toolroom Mills are easy to use, and offer the precision control of the Haas CNC system. They use standard 40-taper tooling, and are very easy to learn and operate – even without knowing G-code. They are the perfect option for schools and companies transitioning to CNC, or for anyone looking for a large-travel machine on a budget., X Axis: 762 mm, Y Axis: 406 mm, Z Axis: 406 mm, Max Spindle Speed: 4000 rpm, Cooling: Air Cooled, Table Width: 267 mm, Table Length: 1213 mm

Control Haas Speed [rpm] 4000 Travel X/Y/Z [mm] 1015/508/526 Tool pick-up SK40 General: Speed 4,000 rpm Tool holder SK40 Clamping area (approx.) 1,350 x 360 mm Equipment/accessories: Coolant Management KSS-Pump Note: Shown clamping devices and tools are not Part of the offer.

Control Haas Speed [rpm] 12000 Travel X/Y/Z [mm] 762/508/508 Tool pick-up SK40 Spindle: Technology Inline Direct Drive Speed 12,000 rpm Power 22 kW Tool holder SK40 NC swivel rotary table: Technology 2 axles, with counter bearing B-axis -35° / +110° C-axis 360° Clamping area ø630 x 500 mm Table load (max.) 300 kg General: Tool magazine 40 stations Rapid traverse in X/Y/Z 22 m/min Equipment/accessories: Chip Management Chip Conveyor Coolant management IKZ pump with fine filter Workpiece Measurement Probe, Renishaw OMP40-2 Tool Measurement Pushbutton, Renishaw OTS Setup operation Electronic handwheel Note: Shown clamping devices and tools are not Part of the offer.

Control Siemens 840 Dsl Speed [rpm] 16000 Travel X/Y/Z [mm] 710/750/710 Tool pick-up HSK 63 General: Control Siemens 840 Dsl Bright equipment package PRO Speed 16,000 rpm Tool holder HSK 63 X/Y/Z travel 710/750/710 mm Rapid traverse 90/90/80 m/min Spindle: Motor spindle technology Bright Dynamic Cutting equipment package Speed 16,000 rpm Power max. 56 kW Torque max. 180 Nm Tool holder HSK 63 NC swivel rotary table: A-axis 225° Technology Direct Drive (Torque) B-axis 360° Technology Direct Drive (Torque) Speed 80 rpm Concentricity milling torque 530 Nm Pallet size 400 x 500 mm Workpiece dimension (depth x width) 630 x 710 mm Workpiece height max. 630 mm Clamping weight max. 650 kg Tool magazine: Technology Chain Magazine Number of stations 80 Tool diameter max. 72 (160) mm Tool length max. 500 mm Tool weight max. 12 kg Control Panel Separate Te ...

x

HERMLE Milling Machine FW800 - With accessories Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

x-travel: 510 mmy-travel: 450 mmz-travel: 410 mmtable-size: 800 x 390 mmspindle taper ISO: 40 turning speed range - vertical: 50 - 2500 U/minquill stroke: 80 mmspindle drive: 3 KWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 1,6 x 1,6 x 1,95 mNC tool milling machine- Heidenhain TNC 114B- hydr. Tool clamping- Machine light- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.: 720 kgdimensions: 1200 x 950 x 1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Producent INTOS Zebrak Tjechië Type FNGJ 20 Chalkboard afmeting breedte x lengte 400 x 256 mm Longitudinal Plaatsing X=as 450 mm Dwarsverplaatsing Y=as 300 mm Verticaleverplaatsing Z=as 350 mm Spindle opname SK 40 DIN 2080 Spindle toerental 50 -2500 rpm. Aantal toerentallen 18 Sheet voeding X-Y as 8-400 mm/min. Sheet voeding Z as 4-200 mm/min. Rapid traverse X-Y as 2400 mm/min. Rapid traverse Z as 1200 mm/min. Electrified capacity 2.2 kW Afmetingen L x W x H 1735 x 1475 x 1660 mm Weight 1660 kg Standaard toebehoren Koelmiddel inrichting Heidenhain uitlezing met taster

5 pcs end mill MK, various, incl. SK50 mount For boring mill MK or milling machine SK50 , See also our post End mills !