used Mills for sale

Stiftmühle Alpine 630 C, dismantling provided by the buyer.

Alpine pin mill A 400 CW. Mining by the buyer is required. 2 x available

Alpine Stiftmühle universal with 21hp engine, 2950 rpm. last in operation as a spice mill

ATEX air micronizing mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High efficiency equipment, very suitable for the micronization of all types of powdery products. Includes bag filter reference C9905 Material 316/316L stainless steel Technical features Model JET-MILL MSB305 Year of manufacture 2004 Equipment configuration ATEX Condition As is Made by BACHILLER

Calibrating disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2004 ENGINE 1 FIMM 4PE80 B 0,75 kW 50 Hz 1990 rpm Condition As is Made by BACHILLER

ATEX calibrator disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2011 ENGINE 1 TECHTOP 5,5 kW 50 Hz 975 rpm Equipment configuration ATEX Condition As is Made by BACHILLER

Britsh Rema Classifier Mill

British Rema classifier mill already dismantled.

Lump crusher BÜHLER MBP 2015 in good condition 4 kw with 119 rpm Belt drive ø235 : 460, n= 61 rpm, cleaned, tested, test run carried out in our specialist workshop mounted on steel frame

Various spare parts for roller mills as well as Locks, fans, screw conveyors.

Machine name: Agitator mill Manufacturer: Bühler Type: Super Flow VCR 200 Year of Make: 2010 Speed: 500 to 750 rpm, the circumferential speed of the rotor 9.2 to 13.8 m/s Content: 15 litres Material: Stainless Steel Dimensions: L 1600 x W 1100 x H 2100 mm Curb weight: 1850 kg Tech. Documentation: Yes Remark: Pressure chamber 5 bar, temperature 0 to 70 °C Accessories: Control cabinet Condition: Used good Price: On request

Blade mill manufactured by COMITROL, model 1700, with a power of 22 kW. Motor pulley diameter: 100mm Mill pulley diameter: 70mm Mill rotation speed: 4200 rpm Material To be determined Technical features Model 1700 ENGINE 1 BROOK CROMPTON 380/415 V 22 kW 50 Hz 2930 rpm Condition As is Made by COMITROL

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

Drais ball mill with approx. 1 m³ Previously used for grinding pigments

Malt Mill Sommer Maltman 110, capacity 150 kg/h This Maltman 110 malt mill is suitable for micro- and small breweries and micro-distilleries Malt kernel is crushed to produce grit, whereby the flour proportion is low and the husk remains largely intact. This enables the ideal preparation of the malt for the brewing or distilling process, and it also provides a natural filter layer for purifying. It has two rolls which one is driven by an electric motor with belt drive. Rollers made of high-alloy steel - fully through-hardened and regrindable. Roller distance is infinitely variable and it can be quickly adjusted. Malt mill has inbuilt magnetic separator and foreign body ejector. Mill was manufactured in year 2019 by German Egon Sommer and it is in very good operational condition. Technical Characteristics Manufacturer Egon Sommer Maschinenbau GmbH Manufacturer’s model Maltman 110  ...

Mobile vertical toothed colloid mill with feed hopper and discharge pipe. Hopper volume: 20L

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kw Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Motor 75 kW Rotor blades: 5 Bu9dtai0he Stator blades: 2 Rotor diameter: 600 mm Rotor width 780 mm Inlet opening: 720x780 mm

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Rental Hosokawa Alpine ACM 2 system by Alpine Rentals. The Hosokawa Alpine Mikro ACM impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process coarse products up to approx. 3 Mohs´ hardness by reaching an extremely high end-product fineness values between d97 10 to 120 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles  ...

Rental Multiprocess System in stainless steel. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In j ...

Rental Hosokawa Alpine RO 28/40 system by Alpine Rentals. Cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee, spices, dried vegetables, etc.). Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, non gas tight Material of construction: -product contacted parts: stainless steel -non product contacted parts: normal steel Food grade Wear protection: without Scope of supply Complete Hosokawa Alpine Rotoplex RO28/40 production plant consisting of: mill inlet with safe design for manual feeding, mill with rotor, knifes and sieve for the rotor, including a relays control cabine ...

Brand new not yet finished Hosokawa Alpine Sugarplex SX 500 machine by Alpine Originals. It would be finished against an order and delivered just as brand new for a reduced price and delivery time. Technical details Stainless steel, Pressure Shock Resistant (PSR) 10 bar Scope of supply Brand new Sugarplex SX 500 bare mill, including the mill housing, internal grinding tools (pins discs) and 37kW motor integrated onto the housing door. The Sugarplex is a pin mill specifically designed and built for the fine grinding of sugar (can be used with other products too). Its compact size and pressure shock resistant design makes this mill quite interesting against the traditional mills used for sugar fine grinding such as our UPZ. The footprint of a Sugarplex system is very small in comparison, just needing a feeding screw, metal detector and two rotary valves before and after the mill ...

Machines No 53423, 5.5KW incl. soundproof booth

Ultra Rotor, Used Type : UR III A 720

Hammer mill of Maschinenfabrik Liezen, HMS 4919. 2 x available.

Used colloid mill made by Młynkol type KMH700. New 2005. Power - 11 kW. Rotation - 2900 rpm. Reported output 700-1000 kg/h. Weight - 185 kg.

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan

Second hand crushing mill. Hopper dimensions: - Length 1410 mm - Width 1650 mm - Height 2600 mm Technical features Model PC66120 Machine motor 90 kW (120 cv) - 1480 rpm Equipment configuration Electrical panels Hydraulic power pack Transport information Length 2700 mm Width 2600 mm Height 1800 mm Documentation Maintenance Manual Operation Manual Drawings Electrical Diagrams Condition As is Made by Tallants Navarro

Used ball mill by TECHMASZ, model 150 L. New: 2016. Ball Mill is a device for the production of food like: creams, toppings, chocolate, fillings, pastes in the whole range of flavors and color palette with a fineness of 50-15 microns. Grinding is carried out with steel balls and an appropriately sized bottom. The mill is equipped with a bottom drain of the mass, which gives the possibility of washing with water and changing from dark mass to white or colored mass. Thanks to this technical solution, the plant is not limited by the production of one type of mass. The minimum charge of the Mill is 50Kg. The mill has the possibility of cooling by connecting cold running water or water from the cooling water unit (closed circuit), which allows precise temperature control. Mill after overhaul (drives, power supply, cleaning(whole + control cabinet).

Skid with pin mill made of stainless steel, with a plate diameter of 160 mm, a bag filter and a hopper. Material 316/316L stainless steel Transport information Length 2300 mm Width 2000 mm Height 2000 mm Weight 1500 Kg Condition As is Made by Unknown

Disc mill with 2 counter-rotating shafts, in stainless steel, for herbs and similar products

Hammer mill Voest Alpine Unirotor 490/190. 2 x available.