used Multipurpose milling machines for sale

Length 9m width 98 lane width 90 We have a wide selection of machines, we invite you to see other ads. We also invite you to our website

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

Table length: 600 mmTable width: 190 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 1500 rpmTaper in spindle:: 20 WVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 600 kgVarious accessories:Vertical milling head

AFM Harnaś R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harnaś R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harnaś R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14  ...

Universal Milling Machine AGURSAL JARBE type F50 Travel X: 1500 mm Travel Y: 750 mm Travel Z: 500 mm Cone: SA 40 Rotation: from 31 to 1400 RPM Table size2000 x 600 mm Year of construction: 1991 Universal Head type HURON Scale 3 axes HEIDENHAIN Centralized lubrication Lubricant pump Variable speed drive for feeds X / Y / Z Voltage: 380 V Spindle motor power: 17 CV Width with ends table 3300 mm Width without ends table: 2000 mm Depth: 2500 mm Total height: 2200 mm Weight: 6 T

Machine Details Stock-No. 1105-03925 Type of machine milling machining centers - universal Make AKIRA SEIKI Type RMV 250 RT 5 AXIS Year of manufacture 2014 Type of control CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock Dreieich Technical details X-Travel 500 mm Y-Travel 250 mm Z-Travel 400 mm table-size ROUND TABLE 250 mm spindle taper ISO HSK 63 spindle turning speed range 45 - 12000 rpm spindle drive motor 11 kW tool change unit 24 CNC-control FANUC OIMD voltage 380 V max. table load 200 kg Throat 380 mm total power requirement 17 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 3.5x 2.5x 2.60 m Additional information AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014 - coolant equipment TROUGHT THE SPINDLE 20 BARS CGIP CO? VOYER 5 AXIS MACHINE IN GOOD CONDITION

Stock number: 3988 CNC CAROUSEL LATHE Manufacturer: ALEX TECH VIPER, Type: VTL 20/24 M Machines NO.: 7640901011, Year of manufacture: 2008 Specifications: Face plate diameter 2000 mm Large turning diameter 2400 mm Face plate speeds ( ) 1-73 / 1-200 2 step rpm Large workpiece height 1500 mm Gr. face plate load 20000 kg X- Movement 1800 mm Y- Movement ( Cross Beam ) 800 mm - 5 Sep each 200 mm Z- Movement 1000 mm C-Axis 0.001 degree Ram size 230 x 230 Power 11/15 Driven tool revolutions 30-2000 rpm Tool Changer 18 (9 Turning 9 Milling ) ISO 50 Stations Main motor 45 Voltage 400 volts Einständer. CNC Control: Fanuc Oi-TD Spindle Hours 10453 Accessories: Chip conveyance. New 2025 Cooling water system. Various accessories. Cooling in the Sp ...

ALEXANDERWERK ROLLER COMPACTOR, MODEL BT 120 PHARMA Year of construction: 2016 With a benchtop design providing a throughput of up to 8 kg/h (based on lactose). Specially designed for use in research and development areas. Can be used for granulation of biological compounds and active ingredients. TECHNICAL DATA Roller size Roller diameter: 120 mm Roller width: 25 mm Production details Maximal pressure force: 20 kN/cm Maximal roller gap: 4 mm Maximal roller speed: 15 rpm Throughput, continuous operation: up to 8 kg/h (lactose) Size Dimensions (H x W x D): approx. 621 mm x 897 mm x 977 mm Weight (incl. control system): approx. 425 kg The modular design guarantees fast changing and cleaning of all working tools and meets the requirements for flexible working Due to of its modular design, the process technology of the machine can be completely disa ...

ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 120 Year of construction: 2016 The WP 120 Pharma was specially designed by Alexanderwerk for use in pharmaceutical research and development areas. Designed as a mobile unit, meets the demand for mobility and flexibility in R&D and pilot plant. The control system and the operating unit are integrated in the machine. Process parameters determined for a later production scale can be easily transferred to larger machines. Due to its modular design, the process technology of the WP 120 Pharma can be completely disassembled without special tools; the modular design also guarantees fast changing and cleaning of all working tools and meets the requirements for flexible production. Machinery size Weight (incl. control system): approx. 825 kg Dimensions (HxWxD): approx. 1,635 mm x 1,450 mm x 924 mm Production Minimum product quantities:  ...

Manufacturer: Almab Production year: 2003 Try sorting with 6 pockets Speed: 15 layers per minute Max leght boards 6000 mm Pack 1200X1200X6000 mm (max hight 1400) Max thickness 100 mm infeed conveyors separator turbo separator end milling units left and right feeding chain conveyor measurement scanner roller conveyors board turner to pockets outfeed after pockets one piece feeder three saw trimmer stacker with double packing arms stick cassettes outfeed conveyors pack press Fromm plastic wraping system package stacking machine

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

FOR SALE – AMADA HFB 125-40 PRESS BRAKE – USED ZOTOFF Company – Used sheet metal equipment We offer for sale an AMADA HFB 125-40 hydraulic press brake, in excellent working order, ideal for precision industrial sheet metal work. ✅ Technical characteristics: Model: AMADA HFB 125-40 Year of Manufacture: 1992 Bending force: 1250 kN Maximum stroke: 180 mm Supply voltage: 380V / 50Hz Installed power: 11 kW Current rating: 24 A Number of phases: 3 Weight: 10,000 kg Serial Number: HFB012540H20610 Robust, reliable machine perfectly suited to mechanical-welding, boilermaking or metal parts workshops. Other sheet metal machines available (equivalent examples): BYSTRONIC Beyeler PR 150T – 150 tons, CNC TRUMPF TrumaBend V85S – 85 tons, numerical control LVD PPEB 135/30 – 135 tons, with Easy-Form control COLLY MTP 125T – 125 Ton Hy ...

Robot milling cell Manufacturer: AMI consisting of the following components Industrial robot Kuka type KR180 R2500 extra Year of construction 2019 Operating hours: 100 Control: KRC4 Milling robot system 12 kW for KRC4 ES779 milling spindle Recooling system Socket for robots 2 x Kuka positioner KP 2 HV2600 HW with base plates 6-fold tool tray Enclosure for 2 separate work rooms

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

AOKI One step PET injection stretch blow molding machines for jar

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5 - 16 Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out an ...

API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm;  ...

The APSX Swiss Nano CNC Machine is a precision metalworking lathe equipped with CNC technology, allowing for high levels of control and accuracy in machining processes. This machine is designed for use in industrial settings, particularly in the field of metalworking and manufacturing. With its compact size and advanced features, the APSX Swiss Nano CNC Machine offers a versatile solution for a wide range of machining applications. This is a desktop Swiss type CNC machine. It has a post processor in Fusion360. Machine is for sale because it worked so well we ended up buying a full size Swiss CNC. It has only cut one part and the part was brass. Machine has two live tooling mill heads that have never been used. The machine comes with everything in the pictures except for the Brass rod. There is a tank for coolant that has never been used. Lots of ER11 holders for the milling heads an ...

A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...

THE LINE IS FOR SALE ONLY AS A WHOLE PIECE. THE BANK THAT OWNS THE LINE DOESN'T AGREE TO SELL THE MACHINES INDIVIDUALLY! Apple juice and concentrate production line consisting of: 1). 3-stage evaporation station made by APV. The station is equipped with an aroma trap. Max. capacity 12.000 l / h of evaporation on the juice. 2). Ultrafiltration station made by APV, PCI A19 membrane type. New 1996. Previously worked on juice. Capacity 10.000 l / h. Temperature 50 C. Pressure 5.5 Bar. 24 KW motor. 19 membranes dia. 12.5mm 3). Piston press made by Zamet, capacity 5.000 l / h. 2 pieces available. 4). Belt press made by AMOS, model Apex 1600. New 1997.

Awaiting refurbishment is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 f ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices sh ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 500-170, Golden Edition, injection moulding machine. Fitted with a 35mm plasticising unit and the Selogica controller. It is one of the most popular machines on the used market and Arburg have done exceptionally well with the combination over the years. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarant ...

We can offer Arburg injection moulding machines, 220,270,420 etc.all goog condition.Serious buyers contact us.

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery und ...

Undergoing refurbishment at our headquarters in Northamptonshire is this Arburg 420C 1000-290 injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs o ...

Arburg 470C 1300-350 with 40mm plasticising unit. The ‘C’ variant of machines from Arburg is one of our most popular requests (once refurbished). These machines were market leaders for quite some time and proved reliable and good value for money over the years. With a little refurbished magic from the team to bring them back to ‘almost new’, these machines now have a new lease of life. They might not be the most energy efficient, but they are by no means power hungry and when the low upfront cost is considered with low maintenance costs, it’s a very good value option. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and ...

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                           FS 40-10-30-4- AOW                                                                 B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                        FS 40-10-30-4- AOW                                                                               B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMIN ...

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. Distinguished by its state-of-the-art solutions, the machine performs the machining process on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSolutions ATMS 1325 m ...

Audion 520 MV-2 Benchtop Welding Machine Power Sealer Packaging Machines – used -: Price ex location: 3.000.-€ (net)! Stainless steel vacuum sealer for vacuuming and/or gassing flexible plastic packaging. Manufacturer: Audion Type: 520 MV-2 Year of Make: 2011 230V, 10 Amp, 850 Watt Dimensions: 590x232x487 mm Venturi pump: 11.3m³/h Weld seam (LxW): 520 x 5 mm Digital control panel Multicycle Compressed air: >6 bar stainless design Fumigation device Condition: good Available: immediately Location: Frankenberg camp / Saxony

AUERBACH AX3 TLF deep hole drilling machine was manufactured by the renowned German company Erste Maschinen Fabrik (ERMAFA Sondermaschinen- und Anlagenbau GmbH) in 2011. Characterised by its high reliability and performance, the AUERBACH AX-3 TLF machine used in the drilling of deep holes with high precision and tolerances in various types of metal, provides excellent optimisation of all aspects of the process and a significant reduction in cycle times. The machining process is fully automatic in 6 axes (X, Z, W, Y, B, A), making it capable of obtaining holes with a maximum diameter of 32 mm and a depth of up to 1700 mm. The AUERBACH AX 3 TLF deep hole machining centre is equipped with, among others, a 1500 x 100 mm interpolated rotary table and a user-friendly HEIDENHAIN iTNC 530 CNC control for programming all parameters of the process. The total weight of the drilling and milling m ...

1 AUTEFA loose stock/flock stampfing press type 6.62 for stamping lose flock into materila carriers for dyeing / bleaching machines, with 2 stampfing arms with motorized rotational carrier support . complete with electrical panel

AVIA VMC 1000 CNC machining center was built in 2017 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A.. The machine, distinguished by its extensive machining capabilities and state-of-the-art technical solutions, will meet any, even the most demanding challenges. Workpieces with a maximum weight of 1000 kg are machined by an extremely fast spindle with thermo-stabilisation, which, combined with precision cutting tools, guarantees excellent milling results. On the other hand, the machine’s high-quality construction with sliding doors offers maximum stability in machining by effectively eliminating any vibrations generated during milling. The AVIA CNC vertical machining center is offered with an extensive range of equipment, including toolholders, digital axis servo drives and the intuitive SIEMENS numerical control with ShopMill 3D overlay. The total weight of the machine is 5300 k ...

AVIA X-5 1250/630 CNC vertical machining center was built in 2015 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for, among others, precision milling, drilling and threading of workpieces with complex geometries in 5 axes. All these machining operations are performed by a high-speed electro-spindle located on a tilting working head. The tilting head, in turn, offers the possibility to use shorter tools and select the optimum cutting angle. The AVIA X-5 5-axis CNC machining center is offered with an extensive range of equipment, including a rotary table, measuring probes and a intelligent HEIDENHAIN CNC controller. The total weight of the machine is 10000 kg. Technical specifications of the AVIA X-5 1250/630 CNC milling machine - number of axes: 5 (X,Y,Z,B,C) - feed in the X/Y/Z axis: 1250/700/725 mm - B axis rotation range: -110°/+45° - C axis rota ...

Brige Type Milling Machine Manufacturer AWEA Model VP 2012 Year 1998 CNC SIEMENS 810D Table Surface 2.200 x 1.100 mm Max weight allowed on table 3.500 kg. Longitudinal travel (X Axis) 2.000 mm Cross travel (Y Axis 1.200 mm Vertical travel (Z Axis) 760 mm Distance between columns 1.300 mm. Rapid Traverse (X Axis) 15 m/min. Rapid Traverse (Y, Z Axis) 12 m/min. Taper BT-50 Main spindle speed 5.000 r.p.m. Main spindle power 37 kVA Speed ranges 2 Automatic tool changer (ATC) INCLUDED Positions in tool magazine 30 Internal coolant 20 BAR INCLUDED Coolant deposit capacity 1000 l Portable handwheel INCLUDED 2 longitudinal chip conveyor INCLUDED Cross chip conveyor INCLUDED Rigid taper INCLUDED Total power 40 kVA Machine Weight 16.000 kg. Large amount of tools and accessories INCLUDED

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

Universal tool milling machine, used universal milling machine, used Type FU 315 - V/2 Fabr. WMW Heckert Built: 1979 Table size/ table: 1250 x 315 mm Laengsmotion/ longit. move: X: 850 mm Horizontal movement/ horiz. Move: Y: 270 mm Vertical movement/ Vert. move : Z 355 mm Tool holder/taper: ISO 50 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 28 - 1400 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t

Qty. 1 Second-hand H-Beam production line Mfc.: Production Line: B&K Welding Machines: THERMATOOL Saw Cutting: LINCOLN Driving Part: Seoho Electric Drive: PAKER PLC: MITSUBISHI Leveller: FLATTENER Press cutter & DDS: Samyang Run-out Table: Wuchang Production range: No. Class Width (mm) Thickness (mm) Length(M) 1 Web 53 ~ 450 2.3 ~ 12.0 6.0 ~ 18.0 2 Flange 50 ~ 300 3.0 ~ 12.0 Capacity: 60,000 MT/annum Equipment total weight: approx.139 MT First installation: 10/1973 Type: Welding H-Beam Facility Welding Type: Electric Resistance Welding Cutting type: Cut-Off Saw, Presscutter Line Speed: Max. 37 m/min.

Baader 166 Fish Gutting machine Small whitefish heading and gutting machine Condition: perfect This machine operates according to the same procedure as the Baader 162, however, within the range of smaller whitefish from 35 to 70 cm in total length (0,5 to 2 kg). When using both machines at the same time, total catches can be processed after rough grading since the working ranges of both machines overlap generously. Capacity: 25, 35 or 40 fish/min Power consumption: 2 kW Water consumption: 25 L/min Dimensions: 1,40 x 1,20 x 1,80 m Weight (net/gross): 650/920 kg The Baader 166 can be combined with the Baader 184

Baader 427 V-Cut Heading Machine This high-quality fish heading machine is designed for being used with BAADER filleting machines and tuned to their throughput rate. It heads various types of fish such as haddock sea trout, cod, saithe, and salmon, both bled or unbled, in a particular meat-saving manner. The V-cut is performed directly behind the collarbone. Spikes holding the head, control flaps, and a knife head controlled by the thickness of the fish always make for an optimal head cut. The machine processes a size range from abt. 45 to 95 cm in total length. Fitted with an additional tail cutter, the version BAADER 427 is used for the processing of tuna. Throughput rate as a function of the fish size tuned to the filleting machine Operator requirements: 1 person Power Consumption 2 kW Max. water consumption 10 l/min Dimensions approx. 1,75×1,00×1,95 m Created for shipp ...

Baader 52 DS is in excellent overhauled condition, this deep-skinning machine is specifically designed for efficiently removing the skin, along with the fatty layer between the skin and muscular tissue, using an oscillating blade. The thickness of the cut can be adjusted to meet specific requirements. It is suitable for processing various fish species such as salmon, saithe, merluza, Alaska pollack, and more. With a capacity of skinning 30-150 fillets per minute, Baader 52 DS offers reliable performance. It can be seamlessly integrated with all Baader whitefish and redfish filleting machines, enhancing overall processing efficiency. The power consumption of the machine is 2.0 kW, ensuring energy-efficient operation. It requires an electricity supply of 380 V at 50 Hz. The dimensions of the machine are 2150 x 850 x 1120 mm (length x width x height), providing a compact footprint  ...

This machine is designed for being directly attached to the herring filleting machines Baader 235 and 36. It receives the butterfly fillets, removes the dark fatty layer along the back, and skins them in a meat-saving manner, the silver film is retained on the fillet. The working range is from 19 to 42 cm in total length. Knife sets can be added to cut the fillets into pieces. Easily exchangeable rollers fitted with blades are available for pieces of 15, 20, 24, 26, 30, 33, 36, or 40mm. If the skinning machine is attached, the filleting machines keep on producing butterfly fillets, single fillets with skin as well as fried fish. This line can be completed with Baader 484, Baader 35 and a bulk feeder.

Baader 581 is an advanced machine designed for salmon and large fish filleting, emphasizing yield, hygiene, performance, and fillet quality. It's known for its innovative, computerized tools and versatility, making it suitable for various fish species and processing conditions, positioning it as one of the most powerful and advanced filleting machines globally. Fish species/size range: Salmon- 2-7kg (gutted, head on) Salmon trout- 1,8-5kg (gutted, head on) Processing state: headed and gutted Performance: 16fish/min Power consumption: approx. 6kW

- Number of Interpolated Axes: 12 - Working Area: - X-axis: 3400 mm - Y-axis: 200 mm - Z-axis: 100 mm - Main Motor Power: 7.5 kW - 4th Axis: Yes - 5th Axis: Yes - Spindle: 5-axis spindle - Self-adjusting CNC Worktables - Special Material Clamping System - Rack-and-Pinion Gripper - Machine Control: OSAI - Cooling System: Electric Cabinet Cooling - Independent Z-axes: 2 - Number of Milling Spindles: 4 - Maximum RPM: 24000 - Construction: Cantilever design - Tables: 2 - Loading System: Belt Feed - External Transport: Roller Conveyor - Enclosed Cabin: Yes - CE Marked: Yes --- For more information or to request a quote, please contact us.

SECOND-HAND 6 HEADS LINEAR COPYING SHAPER AND SANDER BACCI MOD. FC6 2500 – CE RULES - units 1-2 milling units - units 3-4 sanding units - units 5-6 sanding units - working length mm. 2500 - working height mm. 180 - n. 8 locking cylinders - cabin (4 sides + roof) - year 1999

SECOND-HAND LINEAR COPYING SHAPER BACCI MOD. FC8 2500 - Unit 1-2: milling units - Unit 3-4 milling units - Unit 5-6: sanding units - Unit 7-8: sanding units - Working height mm. 180 - Max. working length mm. 2500 - 8 locking cylinders -Cabin - S/N 1481 - CE year 2000