used Other Eccentric Presses for sale

ACMA rotary frame press line 4-tray carousel Manufacture of plywood beams, solid wood panels Ideal joinery, finger jointing, worktop, etc... Press n°1: Useful length: 4500 mm Usable height: 1300 mm Useful thickness: 100 mm 5 hydraulic front balers 10 double-acting hydraulic cylinders Press n°2: Usable length: 7500 mm (3 zones of 2500 mm) Usable height: 1300 mm Useful thickness: 100 mm 9 hydraulic front pressers 18 double-acting hydraulic cylinders Wood feeding table, gluing width 200 mm Vertical roller discharge table Traffic congestion: Length: 9000 mm Width: 2900 mm Height: 3200 mm Weight: 13000 Kg

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A.. The machine, designed for machining workpieces with a maximum length of 1500 mm, is distinguished by the use of many state-of-the-art technical solutions. It thus meets all, even the most intensive challenges of modern business. The ADIRA BB3515 CNC press brake is equipped with a powerful electric drive , developed in Bluedrive technology. Compared to a standard hydraulic system, this drive is free of filters, seals and hydraulic oil. As a result, the machine is much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. Furthermore, ADIRA’s patented HEXA-C design concept minimis ...

Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm

Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4410 10” Stroke 33” Shut Height 36” x 36” Bed 80 Strokes Per Minute Partially Rebuilt Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4621 10” Stroke 32” Shut Height 36” x 32” Bed 80 Strokes Per Minute Bolsters are included. Both presses are in working condition and under power.

The machine can gently separate meat from waste components, like bones, veins, and skin. It processes fish, deboned turkey drumsticks, chicken backs, legs, wings, tails, necks, and turkey and chicken carcasses. The solid components remain outside the drum. The ratio between yield and quality can be influenced by means of adjusting the pressure roller. A flexible squeezing belt transports a product to the perforated drum, where it is pressed between the belt and drum. The soft components come inside of the drum through the holes. The solid components stay outside. Yield and quality can be adjusted using the pressure roller. Operation process with a flexible squeezing belt feeds the product to a perforated drum and presses the soft components through the holes of the drum. Capacity: up to 3500 kg per hour Voltage: 3 x 400 V Hole diameter: 2 or 5 mm

Semi-automatic baler horizontal press 400 Plus is suitable for processing the material to an average of 1 ton per hour. The machine is ideal for industrial plants producing high quality material in the relative small amounts. When the disc presses projecting entirely to the door 400 Plus press produces a very compact bales with dimensions and weight comply with the requirements of the mill. Bale can be completely discharged from the chamber after binding, facilitating switching between materials. Vertical binding system makes the machine is easy to use, quick to bind and suitable for setting along the wall. Technical parameters: dimensions/ size of the baler (height x width x depth)2400 mm x 1750 mm x 4630 mm weight of the baler 5000 kg inlet size (height x width) 820 mm x 930 mm weight of a bale 200 – 400 kg bale wiring wire tape or string number of wires 4 bin ...

Center height: 300 mm Turning diameter: 600 mm Distance between centers: 2100 mm Eccentricity: max 140 mm Self centering chuck diameter: 200 mm Work piece weight: max 250 kg Grinding diameter: 224 mm Work piece turning speed: 18/40/63/90 rpm Grinding wheel dimeter: 915 mm Grinding wheel thickness: 32-63 mm Grinding motor: 7,5 hp Size: 5000 x 2100 x 1700 mm Weight: 4900 kg Includes 3 wheel hubs and 4 used grinding wheels

BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

equipped with:5 slide units1 Eccentricpress 70 kNworking range:wire diameter range: max. 3,0 mmstrip metal width: max. 40 mmfeeding length: max. 170 mmoutput: max. 250/min; ready for operation

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

Bohle HS400 lifting and turning device for containers, suitable for use with feeding tablet presses, capsule fillers etc. Up to 400kg lifting capacity

Bank of 4x Bradley & Turton 120ton Upstroke Presses 20” / 500mm sq electrically heated platens Daylight adjustable 18” 2200psi 12” Ram diam. 12” stroke Return rams Solid state relay Hydraulic valve for Press up / down Quantity available: 4 complete with 1x pump unit.

Bradley & Turton Upstroke Presses Tonnage: 50ton Electric Platens Double Daylight 15” (375mm) sq. platen Fully guarded With individual pump units

3x Bradley & Turton 50ton Upstroking Presses 380mm x 380mm (15”) sq platens Electrically heated platens 540mm (22”) daylight Fully guarded With individual temperature controls

Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Mbawvyqg Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Bucher Fruit Presses for Sale 2 Machines Available Location UK Indassol will remove and load to your transport if required.

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet ...

Code: 0252 Brand: COLOMBO Model: 13/8 Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h

Code: 0252 Brand: COLOMBO Model: 13/8 Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h

COLOMBO AGOSTINO 225.400 coil stamping and punching line was built in 2006 in Italy by Colombo Agostino S.p.A. Its extensive machining capabilities and high reliability make it an excellent choice for series production of components, such as washing machine parts or automotive parts. The production process is fully automatic, thanks to a high-speed feeding system. It unwinds the sheet metal from the coil towards the work station, which features precision tools operating at a maximum force of 400 tonnes. The monolithic design of the machine further ensures high durability and stress-free operation. The COLOMBO AGOSTINO coil-fed punching machine weighs 75000 kg. The coil punching line is complete and consists of the following machines: – 400 t eccentric press: COLOMBO AGOSTINO – sheet metal decoiler: DEF CT 3/128 – coil lift table – sheet metal straightener RA 3000/4-8/120 A ...

Code: 0135 Brand: CPL - ITALY Model: IF Cut- off milling machine for making parallel joints on drawers, various parts of furniture, wine and liquor boxes, cigar boxes, gift boxes and beehives for beekeeping Technical data: The parts are machined in packs automatically. Depending on the type of milling cutters, different types of joints can be made Working width mm 450 Unlimited working length Sawing unit: Blade diameter mm 250 - Motor Hp 4,5 - Blade transversal adjustment Cutter group: Diameter mm 180 - Motor Hp 7,5 N: 2 pneumatic clamping presses Operating pressure 7 Atm Overall dimensions: mm 1000 x 1100 x 1450 h Weight kg 720

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

2 presses Max pressure: 120 ton Table size press left: 450 x 450 mm Between columns: 450 mm Max open: 285 mm Table size press right: 480 x 500 mm Between columns: 480 mm Lower and upper table are heated Max temperature: 200° C Weight: 5 ton

2 presses Max pressure: 50 ton Table size: 400 x 500 mm Between columns: 400 mm Lower and upper table are heated Max temperature: 200° C

2 presses Max pressure: 60 ton Table size: 350 x 350 mm Lower and upper table are heated Max temperature: 200° C

DELTECO PE-63 (1998) Swan neck eccentric mechanical press Nominal force: 630 KN Normal stop position: TDC Lifting points: 2 Maximum mass of moving part of die: 136 Kg Max. number of clutches/min in stroke by stroke: 38 Strokes per minute in continuous operation: 100 Minimum travel: 8 mm Maximum travel: 100 mm Maximum height of closed die: 340 mm Slider adjustment: 92 mm Total stop time: 190 ms Spindle adjustment: 80 mm. Safety distance with two hands: 304 mm Max. r.p.m. Flywheel: 380 Electrical Data: Installed power: 5.5 KW Voltage: 380 V. Clutch/brake: Max. pressure: 0.588 Mpa Min. pressure: 0.343 Mpa Pneumatic System: Max. pressure: 0.588 Mpa Min. pressure: 0.440 Mpa Characteristics of the largest die: Maximum mass: 275 Kg Length: 450 mm Width: 310 mm Dimensions: 1500 x 1240 x 2810 mm. Press mass: 4,300 Kg.

Non-contact position measuring system Manufacturer: Dornier Type: I-W-A Anwendungsgebite are: Axial and radial shaft vibration measurements Monitoring of measuring tolerances Determination of deformation and displacement Measurement of wave and eccentricities Roundness measurement Valve position measurement Thickness measurement Accessories: various transducer and mounting plates Evaluation electronics Connection cable Operating instructions Calibration curves Condition: used More info: see also photos All information without guarantee

DURMA AD-SERVO 30175 CNC hydraulic press brake was built in 2016 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. This highly efficient machine is an effective answer to the daily challenges of modern business. The state-of-the-art technology used in it makes it more precise and energy-efficient than other presses on the market. The stress-relieved steel design, combined with economical drives, guarantees excellent bending results, even during the most intensive machining. All this is complemented by the intelligent CYBELEC CNC control with its intuitive interface. The DURMA AD-S 30175 CNC press brake weighs 11500 kg. Technical specifications of the DURMA AD-SERVO 30175 press brake - CNC controller: CYBELEC ModEva 15T - maximum press force: 175 t - maximum sheet metal length: 3050 mm - slider stroke: 265 mm - maximum weight of upper tool: 11 kg - maximum weight of bottom ...

Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster  ...

-WORKTABLE DIMENSIONS 1030X680 mm -CARRIAGE DIMENSIONS 3200X350 mm -MAX SQUARING CAPACITY WITH SCORING UNIT 3350 mm -CUTTING WIDTH ON PARALLEL FENCE 1300 mm -TILTING BLADE RANGE 0° -45° -MAX CUTTING HEIGHT WITH BLADE d.450 mm 155 mm -MAX CUTTING HEIGHT W. BLADE AT 45° (d.450 mm) 110 mm -MAX SAW BLADE DIAMETER/HOLE 450/30 mm -SAW ROTATION SPEEDS 3000/3600/4200 RPM -DUST EXTRACTION OUTLET ON MACHINE BED d.120 mm -MAIN MOTOR POWER 5.5kW (7.5HP) 50Hz -NOISE LEVEL ACC. EN27960 STANDARDS 84.4-86.3 dB(A) -SCORING MOTOR POWER 0.55kW (0.75HP) -MAX SQUARING OPENING WITH STOPS 3600 mm STANDARD EQUIPMENT -CARRIAGE IN ANODIZED ALUMINIUM ALLOY SLIDING ON HIGH- PRECISION ADJUSTABLE GUIDES IN HARDENED AND GROUND STEEL -EXCLUDED BLADE SAW GUARD -MITRE GAUGE ON ADDED TABLE WITH 90° QUICK-LOCKING AND SINGLE-DEGREE TILTING SCALE PLUS REFERENCE AT 10° 15° 22.5° 30° 45° -QUICK F ...

The Rollfix 300 Fritsch rolling machine is a classic among rolling machines. This model impresses with its gentle and even rolling out of dough, simple operation and easily reproducible production results. Key features of the machine: Rolling speed: 40 m / min. Working width: 650 mm. Roller diameter: 88 mm. Gentle and even rolling out of dough.

Used Rollfix Fritsch 60/650E rolling machine The Rollfix Fritsch 60/650E rolling machine is a model that impresses with its gentle and even dough rolling, simple operation and easily reproducible production results. Suitable for all types of dough, for rolling and unrolling all types of bread dough, rye dough, wheat dough and mixed dough. Key features of the machine: digital control, flour sprinkler, long roller, transport belt width 650mm, roller opening 0.3 - 45mm, gentle and even rolling, production of thin dough, simple handling, processing of dough blocks up to approx. 15 kg, advancement speed 93,3 cm/sec, mobile on rollers, power - 1.4 kW.

Cold Radial Forging Machine GFM SHK-10 with original CNC made by GFM YOM: 1971 / 2019 CNC: GFM 6000-GP-RE Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght ap ...

Upgrade with original GFM CNC in 2006 General upgrade by GFM in 2011 (worked only 9352 Hours, after) also the oscillation brake has been replaced by a hydraulically operated oscillation system Force of each hammer 200 tons Total Forge Tonnage 800 tons Strokes/min 580 Max Forging bar diameter 160 mm Max Squares with 140 mm Hammer length 326 mm Diameter of adjustment range 100 mm Forge eccentricity 6 mm Feed of Manipulator A 4.800 mm Feed of Manipulator B 5.200 mm Workpice length at lateral unloading 4.000 mm Manipulator spindle I.D. 111 mm Total installed power 450 kW Machine weight 117 tons

Code: 0211 Brand: GRIGGIO Model: TR C/N - CE Standard Bit mortiser with tilting table - CE Standard Worktable dimensions mm 565 x 315 Head longitudinal stroke mm 240 Head transversal stroke mm 180 Head vertical stroke mm 140 Drill chuck Wescott mm 0-20 Spindle speed 3000 rpm Motor power Hp 3 Screw and eccentric woodpress Square on the plane tilting -45 / +45 degrees Revolver unit with center distances 16-22-25-32 mm Handwheel with numerical height display Wheels on base Overall dimensions mm 800 x900 x 1400 h Weight kg 260

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

HAULICK HPV 75 Eccentric Press Maximum pressing force 75 t Bottom working table 640x540 mm Maximum number of strokes per minute (manual work) 50 spm Maximum number of strokes per minute (automatic work) 270 spm Min. length of the slider stroke 7 mm Max. length of the slider stroke 78 mm Certified by SCHULER 04.08.2012

Features: 85,000 lbs of bending force with reinforced bending gates and frame Large volume reservoir elevated center of bend 7-1/2 HP motor for Heavy-duty swager/expander Push button controls Easy-to-use knee control for forward/reverse Automatic depth-of-bend selector Bending die retainer Rugged I-Beam construction Exclusive safety guard package Front swivel caster w/o brakes Tooling included for up to 4 expanding Tree Phase The SS-300 is designed for production work and bending heavier materials up to 3 OD (Outer Diameter). It meets the standards set by our other models for precise bending and end finishing. The SS-300 provides 85,000 lbs. of bending force in comparison to 58,000 lbs. produced by our other models. It comes standard with a 7-1/2 HP motor. A 3 tube bent to 90-degree in the automatic mode can be completed in 16 seconds. The ergonomically design ...

Type: APE 250. Band saw blade pneumatic strip shears. Strip width up to: 250 [mm]. For straight rectangular and burr-free cutting off the bandsaw blades. Pneumatically operated for double cutting (two shear knives). Year of manufacture: 2016. On stock more Ideal BAS flash butt welding machines and automatic punching presses Bruderer, Mabu, Schaal, Bihler and more.

The T300 tablet press is a rotary press that compresses solids and is equipped with 40 punch stations. The exact characteristics of the press machine vary according to the type of punch chosen. Technical data: Length mm 1280 Width mm 865 Height mm 1850 Net weight Kg 1920 Power A 12 Frequency Hz 50 Voltage Volt 380 Productions characteristics: Machine speed 260,000 tablets / h Max. tablets diameter 13 mm Filling depth 2 – 16 mm Min. production 12,000 tablets/h Max production 300,000 tablets/h Mould external diameter 24.01 mm Mould height 22,22 mm The T300 is a rotary tablet press equipped with two pairs of pressure rollers, one for pre-compression, the other for main compression. The operator side of the press is mainly in the front part of the machine where the four manual wheels, the control elements and the console are located. The press is fed from the top, ...

Presses Manufactured by JR Dare Model PR100X2 Tonnage can be set between 20 and 100ton Platen size 16” (400mm) x 16” (400mm) Daylight 400mm. Pressure can be changed Bumps cycles platen temperature all programmable Mitsubishi controls 1x pump unit per pair of Presses Dims: 2.4m long x 1m deep x 2m high

Automatic punching press, high speed press, eccentric press, single-column press, punching machine, single-column eccentric press. Manufacturer: Kaiser PO 10. Year of manufacture: 1982. Pressure capacity: 10 [tons]. Stroke: adjustable 2 to 40 [mm]. Speed: 120-600 [strokes/min]. Table size: 460 x 250 [mm]. Clamping pin: Ø 32 [mm]; depth 50 [mm]. Central automatic lubrication system. Connection: 380 [V]; 50 [Hz]. Manual speed adjustment on motor. Motor: Stober; 1.1 [kW]; 1450 [1/min]. Single disc clutch and brake. Dimensions: 1250/950/H1800 [mm]. Weight: 850 [kg]. El schematics included. Packing and loading included. Feeding device not included, if needed contact for more information.

KAISER V 32 WH high-speed press built in 2006 in Germany allows fully automatic, high-precision machining of sheet metal with a maximum thickness of 4 mm. During the machining process, a reliable ZEHNDER & SOMMER feeder is used, which accurately feeds the sheet metal into the working space of the machine. At the same time, the slider is put into reciprocating motion by an eccentric (crankshaft) and two connecting rods, from the movement of an electric motor with mechanical transmission. The use of this solution ensures unprecedented speed and accuracy of sheet metal pressing, essential during mass production of various types of components. In addition, the KAISER V32 WH eccentric press has a vibration- and oscillation-resistant design, maintaining high stability during even the most intensive machining. The V 32-WH 32 t automatic press weighs 5500 kg. Technical specifications of the K ...

KAISER V 40 WH high-speed press was built in 1985 in Germany. The machine’s high press force of 40 tonnes and extensive machining capabilities make it the ideal solution for the mass production of various types of parts. All machining operations, i.e. precise cutting, shearing and bending of the sheet metal, are performed fully automatically by the machine thanks to a reliable feeder that feeds the sheet metal precisely into the machine’s working area. The V 40 WH / 860 eccentric press is also characterised by a high-quality design based on four feet with anti-vibration cushions. This solution effectively dampens all vibrations and oscillations, which translates into high stability during even the most intensive machining. The KAISER V40-WH/860 40t high-speed eccentric press weighs 6800 kg. Technical data of the KAISER V 40 WH automatic press - press force: 40 t - work table dim ...

UnitHub is an automatic system for storage and retrieval. Could be used to manage a warehouse of for end users to pick up goods. System was installed, but only used for a short time. Now, it is professionally dismantled, packed and ready to be installed wherever necessary. The Unit Hub and all of the conveyors, the electric cabinet, software - everything is included. It could be installed by the original producer and their Installation team. If there are any modifications needed, we can organize it. Don't hesitate to ask. UnitHub can be installed both indoors and outdoors; such as in shopping malls, office buildings, residential complexes, courier and postal branches, and outdoors. The UnitHub has three functions: STORAGE of goods/orders; OUTPUT of orders around the clock; RECEIPT of packages for further shipment. With UnitHub, your customers can conveniently receive goods ...

Klingelnberg S-35 10-Axis CNC Gear Cutting Machine 10-AXIS CNC CONTROL SUITED FOR MEDIUM & LARGE SPIRAL BEVEL & HYPOID GEARS 23.6 MAXIMUM WORKPIECE DIAMETER DESIGNED HIGH DEPENDABILITY & PRECISION CONTINUOUS & SINGLE INDEXING OPERATIONS SPECIFICATIONS: MAXIMUM WORKPIECE DIAMETER 23.6 (600mm) SMALLEST NORMAL MODULE 0.137 LARGEST NORMAL MODULE 0.393 MAX TOOTH WIDTH 3.93 SMALLEST TRANSMISSION RATIO 1:1 LARGEST TRANSMISSION RATIO 1:10 SPIRAL ANGLE (DEGREES) 0-60 CUTTER HEAD SPINDLE: OERLIKON SHORT TAPER 1:4 0-5.118 SPINDLE SPEEDS (INF. VAR.) 30-350 MIN-1 SPINDLE TILT (DEGREES) 0-35 ECCENTRICITY 0-10.82 CUTTER HEAD RADIUS 3.46-7.12 WORKPIECE SPINDLE OERLIKON OUTSIDE TAPER 1:4 0-8.85 INSIDE TAPER NO. 39, 1:19,692 6 MAX SPINDLE SPEED 0-160 MIN-1 BORE 0-6.29 AXIAL OFFSET +/-2.36 SWIVEL RANGE (DEGREES) -7 UP TO 90 FEEDS: GENERATING FEED (INF. VAR.) 4 ...

Korsch EK III single station eccentric tablet press, maximum tablet diameter 60mm, maximum depth of fill 70mm (currently set for maximum 30mm depth of fill). Maximum pressure 200kN. Four speed (11, 22, 32, 42 strokes/minute) capacity up to 2520 tablets per hour, using a single-tip tool.

Korsch Pharmakontroll PHK 2/171 kN machine monitoring and control system for rotary tablet presses.

Eccentric shaft for hot forging press K8548 6300T Weight, kg 27 800

KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE- marked Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely r ...