used Plastic injection machines for sale

Arburg 1500T 3200-1300 e² / Hybrid machine with a turntable Year of Make: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Spar spacing: 0x0 mm Size of the clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Hardened injection unit - Bimetal Main motor of the machine – servo motor driven by inverter Very precise rotary table, driven by a servo motor, controlled by an inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment ...

Arburg 220-90-350 Year of Make: 1993 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 1860 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Spar spacing: 221x221 mm Size of the clamping plates: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: HYDRONICA Additional equipment: Very good technical condition Operating hours: up to 25,000 hours The machine worked in a company that produced packaging for the food industry Metrics: Weight: 1700 kg Length/Width/Height: 3.31x1.75x1.50 m Drive: Pumps/motor: 11 kW Heating capacity: 3.5 kW Total power: 14.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On requ ...

Arburg 220D 350-90 Year of Make: 1991 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 1860 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Spar spacing: 221x221 mm Size of the clamping plates: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Metrics: Weight: 1850 kg Length/Width/Height: 3.30x1.20x1.50 m Drive: Pumps/motor: 11 kW Heating capacity: 3.5 kW Cylinder heating: 14.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 220M 350-90 Year of Make: 1997 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 1860 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Spar spacing: 221x221 mm Size of the clamping plates: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Perfect technical condition Operating hours: 19,000 hours The machine worked in a company that produced packaging for the food industry Metrics: Weight: 1620 kg Length/Width/Height: 3.30x1.70x1.94 m Drive: Pumps/motor: 11 kW Heating power: 4.6 kW Total power: 15.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 220M 350-90 Year of Make: 1990 Injection unit: Screw diameter: 30 mm Injection weight: 58 g Spray pressure: 1290 bar Dosing volume: 70 ccm Clamping unit: Clamping force: 35 t Spar spacing: 221x221 mm Size of the clamping plates: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Euromap Robot interface Air Valve x 1 Hydraulic core pull x1 Additional clamping elements that are used to install the injection unit vertically Machine was serviced by the Arburg company, in very good technical condition It is possible to buy a few machines in a package at the lower package price Metrics: Weight: 1500 kg Length/Width/Height: 3.30x1.09x1.90 m Drive: Pumps/motor: 11 kW Heating power: 3.4 kW Total power: 14.5 kW All offered machines are started by our service technicians before they are sold. It is poss ...

Arburg 221KS 250-75 / Universal machine Year of Make: 1999 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Spray pressure: 2350 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 221 mm Size of the clamping plates: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core train control Hardened injection unit - Bimetal Clamp for fastening the injection unit vertically Metrics: Weight: 1150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pumps/motor: 5.5 kW Heating power: 4.6 kW Total power: 10.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to par ...

Arburg 221M 350-75 Year of Make: 1996 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 1570 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Tiebar spacing: 221 mm Size of the mounting plates: 342x250mm Ejector: hydraulic Control: MULTRONICA Additional equipment: Metrics: Weight: 1300 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 7.5 kW Heating power: 4 kW Total power: 11.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 270 C300-100 Year of manufacture 2007 Clamping force: 30 tons. Screw diameter: 20 mm Spraying weight: 28 gr. Max. spray pressure: 2500 bar incl. integrated Arburg Multilift 2 Core moves

Manufacturer: Arburg Type: 320 S 500 - 150 Year of production: 2000 Controls: Selogica Closure Type: Hydraulic Clamping force: 500 kN Bar spacing: 320 mm x 320 mm Plate Size: 498mm x 498mm Tool height: min 225 mm Opening Distance: 350mm Maximum distance between plates: 575 mm Screw: 35mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15kw Heating: 4.8 kW Dimensions: 3.7 m x 1.2 m x 1.8 m weight: 2250 kg On-screen text: German Additional equipment: Core String: x1 Euromap

Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Metrics: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selecte ...

Arburg 320C 500-100 / Excellent technical condition Year of manufacture: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2000 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: The machine is in excellent technical condition and has been used to test injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced Injection Units – Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Me ...

Arburg 320C 500-250 Year of manufacture: 11.2004 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Metrics: Weight: 2330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 320C 600-250 / Machine in very good technical condition Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine has produced injection molded parts for the medical industry - pure production conditions Core train control Hardened injection unit - Bimetal Built-in sorting flap Metrics: Weight: 2330 kg Length/Width/Height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of ...

Arburg 320K 700-100 Year of Make: 2001 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Spray pressure: 1550 bar Dosing volume: 70 ccm Clamping unit : Clamping force: 70 t Tiebar spacing: 320x320 mm Size of the clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Hydraulic core pull x 1 Hardened injection unit - Bimetal Central lubrication Original Arburg mould crane, 2 lifting speeds, lifting capacity 100 kg Metrics: Weight: 2170 kg Length/Width/Height: 2.94x1.45x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 4.9 kW Total power: 15.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Pr ...

Arburg 320KS 700-250 Year of manufacture: 11.2002 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 70 t Tiebar spacing: 320x320 mm Size of the clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Air Valve x 3 Control with hot runners Hardened injection unit - Bimetal Central lubrication Metrics: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 320S 350-60 Year of manufacture: 07.2003 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 2 Hydraulic core pull x 2 Control with hot runners Hardened injection unit - Bimetal Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Built-in sorting flap and conveyor belt Metrics: Weight: 2150 kg Length/Width/Height: 3.32x1.21x1.81 m Drive: Pumps/motor: 7.5 kW Heating power: 2.7 kW Total power: 10.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a ...

Injection pressure 1900 bar. Length of the clamping plate: 570 mm. Width: 570 mm. Dimension between the bars: 370 x 370 mm. Opening stroke 500 mm. With robot

Arburg 370E 600-290 / Electric motor / Operating hours: approx. 20,000 h in automatic mode Year of manufacture: 03.2015 Injection unit: Screw diameter: 40 mm Injection weight: 172 g Spray pressure: 1530 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot interface Air Valve x 2 Core train control Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Automatic tool height adjustment Central lubrication Metrics: Weig ...

Arburg 370M 600-200 Year of Make: 1993 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1500 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 545x545 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Metrics: Weight: 3080 kg Length/Width/Height: 4.30x1.85x1.60 m Drive: Pumps/motor: 11 kW Heating capacity: 5.5 kW Total power: 16.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 420C 1000-290 with the Geiger MiniServo 0.5 sprue picker Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 172 g Spray pressure: 1530 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap It is possible to change the screw diameter The machine has been regularly serviced by the authorised Arburg service provider Metrics: Weight: 3740 kg Length/Width/Height: 4.14x1.63x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 6.4 kW Total power: 21.4 kW All offered machi ...

Arburg 420C 1000-350 Year of Make: 1995 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Euromap Robot interface Hydraulic core pull x 1 Metrics: Weight: 3700 kg Length/Width/Height: 4.35x1.64x2.08m Drive: Pumps/motor: 22 kW Heating capacity: 8.6 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 420C 1300-675 with the Star Sprue Picker Year of Make: 2002 Injection unit: Screw diameter: 50 mm Injection weight: 297 g Spray pressure: 2080 bar Dosing volume: 353 ccm Clamping unit: Clamping force: 130 t Spar spacing: 420x420 mm Size of the clamping plates: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 2 Hydraulic core pull x 2 Hardened injection unit - Bimetal Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying Covers from the operator's side open automatically Metrics: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is possibl ...

Regularly serviced machine that is always kept in top shape. The screw rotation is carried out with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF disk. The notification can be made in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 mm auger for technical materials in good condition. A video of the operation of the machine was also created, which can also be tried out in person at our site. Please see our other ads.

Regularly serviced machine that is always kept in top shape. The screw rotation is carried out with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF disk. The notification can be made in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 mm auger for technical materials in good condition. A video of the operation of the machine was also created, which can also be tried out in person at our site. Please see our other ads. Information about the machines we offer and our company: - We only sell machines that are owned by us and can be purchased in our warehouse ...

Ref. no.: 18061Hersteller: ARBURGYear of construction: 2003Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 420 x 420 mmMould height min.: 250 mmMould height max.: 700 mmPlaten size (h x v): 570 x 570 mmInjection unitScrew diameter: 25 mmInjection volume: 54 cm³Shot weight: 49 gInjection pressure: 2500 barMeasurements and weightDimensions: 3360 m

Arburg 420S 800-350 Year of manufacture: 11.2003 Injection unit: Screw diameter: 50 mm Injection weight: 250 g Spray pressure: approx. 1300 bar Dosing volume: 288 cc Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Integrated original Arburg sprue picker on the side Metrics: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected mac ...

Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Metrics: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Metrics: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 470C 1500-400 with the Wittmann W721 robot Year of manufacture: 12.2006 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - Bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of Make: 2006 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Metrics: Weight: 4900 kg Length/Width/Height: 4.44 ...

Arburg 470C 1500-800 with the Sepro Industrial Robot 65 sprue picker Year of Make: 2021 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Perfect technical condition, machine like new Operating hours: 7,788 h in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Pneumatic core pull x 2 Pneumatic nozzle closing valve x 2 Hardened injection unit - Bimetal Sprue Picker Sepro Industrial Robot 65 Year of Make: 2021 Purchase of the sprue picker for an extra charge It is possible to buy the machine with another robot It is possible to buy a Moretto raw material feeding sy ...

Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pulls and robot connection, with quality control program. - Immediately available in our warehouse in Budapest, loaded onto the customer's truck free of charge or delivered to the customer's home for a refund of freight costs. - Function-tested (functional guarantee) - The machine can also be checked when it is switched on Information about the machines we offer and our company: - We only sell machines that we own and can be purchased from our warehouse in Budapest. - We inspect and test each offered machine before delivery - we do NOT sell non-functional goods - we are NOT a third-party intermediary. - All machines offered come from successful companies for which maintenance and care are a matter of course - all offered mac ...

Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pullers and robot connector, with quality control program. Please see my other ads.

Arburg 470H 1000-400 e² / Hybrid machine Year of Make: 2010 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 100 t Spar spacing: 470x470 mm Size of the clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: h in automatic mode Air Valve x 1 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Central lubrication Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Metrics:  ...

Producent: Arburg Typ: 470 S 1300 - 350 Rok produkcji: 1999 Sterowanie: Selogica Typ zamknięcia: Hydrauliczny Siła zamykania: 1300 kN Rozstaw prętów: 470 mm x 470 mm Rozmiar płyty: 650 mm x 650 mm Wysokość narzędzia: min 275 mm Odległość otwarcia: 575 mm Maksymalna odległość między płytami: 850 mm Śruba: 35 mm Objętość skoku: 139 ccm / 117 gram PS Ciśnienie wtrysku: 2500 bar Ogólne Silnik: 22 kW Ogrzewanie: 8,8 kW Wymiary: 4,5 m x 1,6 m x 2 waga: 5100 kg Tekst na ekranie: niemiecki Dodatkowe wyposażenie/wyposażenie Rdzeń ciągnący: x1 Euromap Gorące strefy

Arburg 470S 1300-350 Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 117 g Spray pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 130 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying The new injection unit is installed in the machine Metrics: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pumps ...

Arburg 520 C - Allrounder 2000-675 -Injection molding machine - Control: Selogica - Handlebar spacing: 520 x 520 mm - Handlebar extension: 100 mm - Tool installation height: 350 mm - Opening travel: 650 mm - Centering: 125 mm - Core pull: 2 - Screw diameter: 45 mm - Shot weight - HP : 240g - Clamping force: 2000 KN - Operating hours pump: 61908 - Automatic operating hours: 55566 - Working position: Standard

Arburg 520C 2000-675 with the Wittmann 821 robot Year of manufacture: 07.2001 Injection unit: Screw diameter: 45 mm Injection weight: 240 g Spray pressure: 2500 bar Dosing volume: 286 ccm Clamping unit: Clamping force: 200 t Tiebar spacing: 520x520 mm Size of the clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Hydraulic core pull x 2 Hardened injection unit - Bimetal Robot Wittmann W821 Year of Make: 2011 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-550, Y-1200, Z-2500 Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot at an additional cost Metrics: Weight: 6630 kg Length/Width/Height: 5.53x1.93x2.22 m All offered  ...

1.0 St. gebr. Injection Molding Machine with 6 - AXIS ROBOT Manufacturer: ARBURG Type: 5700C2000-675 GOLDEN EDITIO Year of Make: 2007 Clamping force: 200 tons Handlebar spacing 570 x 570 mm Screws DN: 45 mm Displacement: 318 ccm³ Moulded part weight 291 g/hp Control: SELGOCIA Equipment: -6 - ACHS robot Stäubli -1 x Core Pull -Bimetal cylinder -Temperature release up to 450° C -3 electric heating control circuits for tool heating

Arburg 570S 2200-1300 / Production line with the Arburg Multilift robot Year of manufacture: 11.2010 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Production line with the Arburg Multilift robot Machine in very good technical condition Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 4 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection The machine was regularly serviced in Germany Arburg Multilift robot Year of manufacture: 11.2010 5-axis robot: 3 axes are driven by servo motors (electric); Axis B ( ...

Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ni ...

Arburg 820S 4000-2100 / Production line with the Arburg Multilift robot Year of manufacture: 12.2010 Injection unit: Screw diameter: 70 mm Injection weight: 984 g Spray pressure: 2000 bar Dosing volume: 1078 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Production line with the Arburg Multilift robot Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 4 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection The machine was regularly serviced in Germany Arburg Multilift robot Year of manufacture: 12.2010 5-axis robot: 3 axes are driven by servo motors (electric); ...

Arburg 820S 4000-2100/400 / Production line with the Sepro Industrial Robot SR S5-35 S3 Trans robot / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Spray pressure: 2500 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced Injection Units – Bimetal Proportional valve on vertical injection unit – precise injection ...

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of Make: 1999 Injection weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 cc Injection weight: 17 g L/D ratio of screw: 24.5 Clamping unit 250 Clamping force: 25 t Panel size: 400 x 400 mm Lights spar spacing: 270 x 270 mm Tool height: 200 mm Opening travel: 275 mm Maximum panel spacing: 475 mm Electrical connection (fuse): 120 l Weight: 1900 kg Control: Selogica equipment: -Sorting flap -Euromap 12 interface -Picker

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of Make: 1999 Injection weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 cc Injection weight: 17 g L/D ratio of screw: 24.5 Clamping unit 250 Clamping force: 25 t Panel size: 400 x 400 mm Lights spar spacing: 270 x 270 mm Tool height: 200 mm Opening travel: 275 mm Maximum panel spacing: 475 mm Electrical connection (fuse): 120 l Weight: 1900 kg Control: Selogica equipment: -Sorting flap -Euromap 12 interface -Picker

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of Make: 1999 Injection weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 cc Injection weight: 17 g L/D ratio of screw: 24.5 Clamping unit 250 Clamping force: 25 t Panel size: 400 x 400 mm Lights spar spacing: 270 x 270 mm Tool height: 200 mm Opening travel: 275 mm Maximum panel spacing: 475 mm Electrical connection (fuse): 120 l Weight: 1900 kg Control: Selogica equipment: -Sorting flap -Euromap 12 interface -Picker

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of Make: 1999 Injection weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 cc Injection weight: 17 g L/D ratio of screw: 24.5 Clamping unit 250 Clamping force: 25 t Panel size: 400 x 400 mm Lights spar spacing: 270 x 270 mm Tool height: 200 mm Opening travel: 275 mm Maximum panel spacing: 475 mm Electrical connection (fuse): 120 l Weight: 1900 kg Control: Selogica equipment: -Sorting flap -Euromap 12 interface -Picker

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of Make: 1999 Injection weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 cc Injection weight: 17 g L/D ratio of screw: 24.5 Clamping unit 250 Clamping force: 25 t Panel size: 400 x 400 mm Lights spar spacing: 270 x 270 mm Tool height: 200 mm Opening travel: 275 mm Maximum panel spacing: 475 mm Electrical connection (fuse): 120 l Weight: 1900 kg Control: Selogica equipment: -Sorting flap -Euromap 12 interface -Picker

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of manufacture: 1999 Shot weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 ccm Shot weight: 17 g Screw L/D ratio: 24.5 Clamping System 250 Clamping force: 25 t Mold platen dimensions: 400 x 400 mm Clearance between tie bars: 270 x 270 mm Mold height: 200 mm Opening stroke: 275 mm Maximum platen distance: 475 mm Electrical connection (fuse protection): 120 l Weight: 1900 kg Control system: Selogica Equipment: -Sorting flap -Euromap 12 interface -Picker

Arburg Allrounder 320KS 700-100 Clamping force: 70t Year of construction: 2002 Injection unit .../100 Screw diameter: 35 mm Clamping unit 700/... Clamping force: 70 t Plate size: 476 x 476 mm Distance between tie bars: 320 x 320 mm Ejection force: 30 kN Mould height: 200...400 mm Opening stroke: 250 mm Max. plate spacing 650 mm Ejector stroke: 70 mm Weight: 2100 kg Control: Selogica

Arburg Allrounder 320KS 700-100 Clamping force: 70t Year of Make: 2002 Injection weight in hp: 59g Injection Unit .../100 Screw diameter: 30 mm Spec. Spray pressure: 1550 bar Spray volume: 70 cc Injection weight in hp: 59 g L/D Screw Ratio: 16.7 Clamping unit 700/... Clamping force: 70 t Size of the clamping plates: 476 x 476 mm Clearance spar spacing: 320 x 320 mm Ejector force: 30 kN Tool installation height: 200...400 mm Opening travel: 250 mm Max. plate spacing: 650 mm Ejector travel: 70 mm Weight: 2100 kg Dimensions(m) LxWxH: 3.2 x 1.5 x1.9 m Control type: Selogica