used Veneering presses for sale

Veneer Press Moulding Press Bürkle Type FPMU Total baling area 2200 mm x 1100 mm divided into 3 faces, each 700 mm x 1100 mm the surfaces can be pulled out to the front per pressing surface 2 press pistons diameter 50 mm Maximum opening 430 mm Press surfaces not heated With emergency stop ripcord Hydraulic pump 1.1 kW Dimensions 3000 mm x 1300 mm x H 1920 mm

gebr. Veneer press GEWEMA / Hiller P65S YOC 1980 Plate size: 250 x 110 cm Opening width: 35 cm Opening width limitation variably adjustable. Connected load: 15.1 kW (8.1 kW with economy circuit) Power per heating plate: 7 kW Press force: 65t Max. operating pressure: 350 bar Circumferential safety ripcord incl. new digital clock Dimensions (approx. Dimensions): L: 288 cm W: 128 cm H: 168 cm Weight: 2.9t All 4 hydraulic cylinders have been resealed (new seal set). The heating plates show signs of wear and tear that are customary for their age. In 2 places of the upper heating plate, smaller pressure points / dents are noticeable by hand (but not immediately visible).

HYDRAULIC PRESS with hot platens model ITALPRESSE SCF 6 second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.70 max. thrust Ton. 120 opening mm. 400 hydraulic pump motor power Hp 3 hot water plates heating via wood boiler weight kgs. 4500 volt. 380/50

Shelf length: 3000mm Shelf width: 1300mm ground clearance: 400mm number of pistons: 4 Piston diameter: 85mm Water heating Safety switch - breakaway

Shelf length: 3000mm Shelf width: 1300mm ground clearance: 340mm Number of pistons: 6 piston diameter: 80mm Oil heating hydraulic side pressure Safety switch - breakaway

Code: 0419 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880

Panel dimensions 1800 x 900 mm Electric heating 2 x 4 kw Working height 300 mm Dimensions 210x107x180 cm

Veneer press Joos Hydraulic Hot Plate Press Type HP 65/1 Machine No. 2313 Pressing area 2200 x 1100 mm Opening height max. 300 mm 2 electrically heated plates 4 hydraulic cylinders Cylinder diameter 80 mm Rack and pinion guide Press pressure 2.7 kg/cm² at 100% design Pressing pressure 3.8 kg/cm² at 70% design Closing time approx. 16 sec. Power requirement 1.1 kW Dimensions 2600 mm x 1250 mm x H 1800 mm Weight approx. 2,500 kg

Panel dimensions 2200 x 1100 mm

Veneer press Fabr. Long Zauner Type; LZT 80 Built in 1983 Working area 2500 x 1300 mm Operating pressure 320 bar Surface pressure 30N/cm² Electrical Plates with tear leash

-) Press surface: 3,100 x 1,600 mm -) Cylinder: 8 cylinders -) Floors: 5 floors, 6 heating plates -) Heating plates: drilled 40mm steel heating plates -) Heating: for hot water or thermal oil (up to 200° -) Press opening: up to 600 mm -) Cooling: with own unit Etc.

SPECIFICATIONS: Water operation Mounted plates Table dimensions: 3000 x 1200 mm 6 pistons: Ø 50 mm Piston stroke: 500 mm EQUIPMENT: 1 heating stove

Panel dimensions 3000 x 1300 mm 6 cylinders Electric heating

Ott veneer press Type JU 60 Built in 1979 Hydraulic Hot Plate Press electrically heated heating plates Pressing area 2200 mm x 1100 mm Maximum insertion height 280 mm With tap control Emergency stop ripcord all around Gold anodized plates 4 plungers diameter approx. 80 mm Connected load 12 kW Spec. Pressure at full occupancy 2.7 kg/cm² Total pressing pressure 65 tons Weight approx. 2800 kg

Electro Hydraulic Heating Plate Press, Hot water, press area 2500 x 1350 mm.

Pressing area 2500 x 1300 mm 60 tons total pressing pressure 4 cylinders 80 mm Opening 400 mm Electrically open and close (no lever) Electric heating Heating plates gold anodised.

OTT shelf press shelf length 330cm width 160cm 3 dunks clearance between shelves 13cm, max clearance with one load 46cm Solid steel shelves Water heating piston diameter 90mm, 10 pistons Safety switch - breakaway 5.5KW Pump Motor total pressure 210 tons machine very solid weight +- 14.000kg machine in stock, can be checked, very good condition loading included in the price

Veneer Press OTT Pressing area 2500 x 1300 mm Electric Heating Plate L x W x H: 3000 x 1500 x 1700 cm Weight approx. 3 to The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Veneer press Total baling area L 3000 mm x W 1250 mm Opening height between the pressing surface 450 mm divided into 3 faces, each 1000 mm x 1250 mm the surfaces can be pulled out to the front without heating hydraulic pressure Good operational condition