used Water slot milling cutters for sale

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

Das Zentren nicht benutzt (Die Pandemie Änderte die Pläne). Das Zentren wurde im Jahr 2020 nach Deutschland gebracht. Accuway Misteiner der besten Hersteller in Taiwan. der Maschinen in die ganze welt liefert Controller Fanuk 0i Spindle speed 10000 rpm Spindle nose taper BT40 Bearing inner diameter 70mm drive system Belt (Direct) X-axis travel 850mm Y-axis travel 550 mm Z -axis travel 150-700 mm Table dimension 1100x600 mm T-slot 5x18x100 Max. weight on table 1000 kg FEED RATES X-axis travel 30 m/min Y-axis travel 30 m/min Z -axis travel 30 m/min Cutting feed rate 12 m/min AUTOMATIC TOOL CHANGE SYSTEM tool magazine capacity 24 pcs Max tool weight  ...

Table length: 600 mmTable width: 190 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 1500 rpmTaper in spindle:: 20 WVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 600 kgVarious accessories:Vertical milling head

AFM Harnaś R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harnaś R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harnaś R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14  ...

Universal Milling Machine AGURSAL JARBE type F50 Travel X: 1500 mm Travel Y: 750 mm Travel Z: 500 mm Cone: SA 40 Rotation: from 31 to 1400 RPM Table size2000 x 600 mm Year of construction: 1991 Universal Head type HURON Scale 3 axes HEIDENHAIN Centralized lubrication Lubricant pump Variable speed drive for feeds X / Y / Z Voltage: 380 V Spindle motor power: 17 CV Width with ends table 3300 mm Width without ends table: 2000 mm Depth: 2500 mm Total height: 2200 mm Weight: 6 T

Machine Details Stock-No. 1105-03925 Type of machine milling machining centers - universal Make AKIRA SEIKI Type RMV 250 RT 5 AXIS Year of manufacture 2014 Type of control CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock Dreieich Technical details X-Travel 500 mm Y-Travel 250 mm Z-Travel 400 mm table-size ROUND TABLE 250 mm spindle taper ISO HSK 63 spindle turning speed range 45 - 12000 rpm spindle drive motor 11 kW tool change unit 24 CNC-control FANUC OIMD voltage 380 V max. table load 200 kg Throat 380 mm total power requirement 17 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 3.5x 2.5x 2.60 m Additional information AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014 - coolant equipment TROUGHT THE SPINDLE 20 BARS CGIP CO? VOYER 5 AXIS MACHINE IN GOOD CONDITION

Stock number: 3988 CNC CAROUSEL LATHE Manufacturer: ALEX TECH VIPER, Type: VTL 20/24 M Machines NO.: 7640901011, Year of manufacture: 2008 Specifications: Face plate diameter 2000 mm Large turning diameter 2400 mm Face plate speeds ( ) 1-73 / 1-200 2 step rpm Large workpiece height 1500 mm Gr. face plate load 20000 kg X- Movement 1800 mm Y- Movement ( Cross Beam ) 800 mm - 5 Sep each 200 mm Z- Movement 1000 mm C-Axis 0.001 degree Ram size 230 x 230 Power 11/15 Driven tool revolutions 30-2000 rpm Tool Changer 18 (9 Turning 9 Milling ) ISO 50 Stations Main motor 45 Voltage 400 volts Einständer. CNC Control: Fanuc Oi-TD Spindle Hours 10453 Accessories: Chip conveyance. New 2025 Cooling water system. Various accessories. Cooling in the Sp ...

Manufacturer: Almab Production year: 2003 Try sorting with 6 pockets Speed: 15 layers per minute Max leght boards 6000 mm Pack 1200X1200X6000 mm (max hight 1400) Max thickness 100 mm infeed conveyors separator turbo separator end milling units left and right feeding chain conveyor measurement scanner roller conveyors board turner to pockets outfeed after pockets one piece feeder three saw trimmer stacker with double packing arms stick cassettes outfeed conveyors pack press Fromm plastic wraping system package stacking machine

Robot milling cell Manufacturer: AMI consisting of the following components Industrial robot Kuka type KR180 R2500 extra Year of construction 2019 Operating hours: 100 Control: KRC4 Milling robot system 12 kW for KRC4 ES779 milling spindle Recooling system Socket for robots 2 x Kuka positioner KP 2 HV2600 HW with base plates 6-fold tool tray Enclosure for 2 separate work rooms

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5 - 16 Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out an ...

The APSX Swiss Nano CNC Machine is a precision metalworking lathe equipped with CNC technology, allowing for high levels of control and accuracy in machining processes. This machine is designed for use in industrial settings, particularly in the field of metalworking and manufacturing. With its compact size and advanced features, the APSX Swiss Nano CNC Machine offers a versatile solution for a wide range of machining applications. This is a desktop Swiss type CNC machine. It has a post processor in Fusion360. Machine is for sale because it worked so well we ended up buying a full size Swiss CNC. It has only cut one part and the part was brass. Machine has two live tooling mill heads that have never been used. The machine comes with everything in the pictures except for the Brass rod. There is a tank for coolant that has never been used. Lots of ER11 holders for the milling heads an ...

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                           FS 40-10-30-4- AOW                                                                 B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                        FS 40-10-30-4- AOW                                                                               B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...

Stroke: 1 mmThroat: 1 mmTable diameter: 1 mm Slotting machineArthur Klink - RH 8 - 20 MACH-ID 9086 Make: Arthur Klink Type: RH 8 - 20 Year: 1970 Length:4000mm Width:1300mm Height:1300mm Weight:2500kg

YOM 1987. Worked not more than 10 years, one shift Grinding length 3000 mm Grinding width 1700 mm Workpiece height 1600 mm Distance between columns 1860 mm Grinding heads- 2 Table surface 3230x1600 mm Number of slots of the table 10 pcs Permissible table load with evenly distributed load 5000kg/m Weight of work-piece 15t Table travel speed 1-40m/min

Plate length: 5500 mmPlate width: 2700 mmPlate thickness: 450 mmNumber of T-slots: 9  Size T-slots: 48 mmType of material: Cast Iron   SPECIFICATIONS Length   5500 mm Width   2700 mm Height   450 mm T -slot size   T 48 No. Of T-slots  9 x Distance from T to T-slot / Jump  300 mm Weight a plate approx.14 Ton Number off matching pieces 3  

Machine type: Magnetic clamping plates incl. control Manufacturer: Assfalg Type: MAGNASLOT 75 Year of manufacture: 10/2015 Condition: used incl. control Offer will only be sent if a complete imprint is provided! Price 3.750 Euro incl. 19% VAT Fixed Price 3.151 Euro net plus 19% VAT Fixed Price Location Warstein , Germany Reference M-ASS-0125 DESCRIPTION We offer you two used magnetic clamping plates including control from the manufacturer Assfalg. Panel size 425mm x 601mm x 60mm 24 clamping poles P75 mm Control EPM D-1-50SC Connection cable 16A (C-automatic required) or 32A Easy to use At call Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms ...

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. Distinguished by its state-of-the-art solutions, the machine performs the machining process on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSolutions ATMS 1325 m ...

AUERBACH AX3 TLF deep hole drilling machine was manufactured by the renowned German company Erste Maschinen Fabrik (ERMAFA Sondermaschinen- und Anlagenbau GmbH) in 2011. Characterised by its high reliability and performance, the AUERBACH AX-3 TLF machine used in the drilling of deep holes with high precision and tolerances in various types of metal, provides excellent optimisation of all aspects of the process and a significant reduction in cycle times. The machining process is fully automatic in 6 axes (X, Z, W, Y, B, A), making it capable of obtaining holes with a maximum diameter of 32 mm and a depth of up to 1700 mm. The AUERBACH AX 3 TLF deep hole machining centre is equipped with, among others, a 1500 x 100 mm interpolated rotary table and a user-friendly HEIDENHAIN iTNC 530 CNC control for programming all parameters of the process. The total weight of the drilling and milling m ...

AVIA VMC 1000 CNC machining center was built in 2017 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A.. The machine, distinguished by its extensive machining capabilities and state-of-the-art technical solutions, will meet any, even the most demanding challenges. Workpieces with a maximum weight of 1000 kg are machined by an extremely fast spindle with thermo-stabilisation, which, combined with precision cutting tools, guarantees excellent milling results. On the other hand, the machine’s high-quality construction with sliding doors offers maximum stability in machining by effectively eliminating any vibrations generated during milling. The AVIA CNC vertical machining center is offered with an extensive range of equipment, including toolholders, digital axis servo drives and the intuitive SIEMENS numerical control with ShopMill 3D overlay. The total weight of the machine is 5300 k ...

AVIA X-5 1250/630 CNC vertical machining center was built in 2015 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for, among others, precision milling, drilling and threading of workpieces with complex geometries in 5 axes. All these machining operations are performed by a high-speed electro-spindle located on a tilting working head. The tilting head, in turn, offers the possibility to use shorter tools and select the optimum cutting angle. The AVIA X-5 5-axis CNC machining center is offered with an extensive range of equipment, including a rotary table, measuring probes and a intelligent HEIDENHAIN CNC controller. The total weight of the machine is 10000 kg. Technical specifications of the AVIA X-5 1250/630 CNC milling machine - number of axes: 5 (X,Y,Z,B,C) - feed in the X/Y/Z axis: 1250/700/725 mm - B axis rotation range: -110°/+45° - C axis rota ...

Brige Type Milling Machine Manufacturer AWEA Model VP 2012 Year 1998 CNC SIEMENS 810D Table Surface 2.200 x 1.100 mm Max weight allowed on table 3.500 kg. Longitudinal travel (X Axis) 2.000 mm Cross travel (Y Axis 1.200 mm Vertical travel (Z Axis) 760 mm Distance between columns 1.300 mm. Rapid Traverse (X Axis) 15 m/min. Rapid Traverse (Y, Z Axis) 12 m/min. Taper BT-50 Main spindle speed 5.000 r.p.m. Main spindle power 37 kVA Speed ranges 2 Automatic tool changer (ATC) INCLUDED Positions in tool magazine 30 Internal coolant 20 BAR INCLUDED Coolant deposit capacity 1000 l Portable handwheel INCLUDED 2 longitudinal chip conveyor INCLUDED Cross chip conveyor INCLUDED Rigid taper INCLUDED Total power 40 kVA Machine Weight 16.000 kg. Large amount of tools and accessories INCLUDED

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

Universal tool milling machine, used universal milling machine, used Type FU 315 - V/2 Fabr. WMW Heckert Built: 1979 Table size/ table: 1250 x 315 mm Laengsmotion/ longit. move: X: 850 mm Horizontal movement/ horiz. Move: Y: 270 mm Vertical movement/ Vert. move : Z 355 mm Tool holder/taper: ISO 50 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 28 - 1400 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t

- Number of Interpolated Axes: 12 - Working Area: - X-axis: 3400 mm - Y-axis: 200 mm - Z-axis: 100 mm - Main Motor Power: 7.5 kW - 4th Axis: Yes - 5th Axis: Yes - Spindle: 5-axis spindle - Self-adjusting CNC Worktables - Special Material Clamping System - Rack-and-Pinion Gripper - Machine Control: OSAI - Cooling System: Electric Cabinet Cooling - Independent Z-axes: 2 - Number of Milling Spindles: 4 - Maximum RPM: 24000 - Construction: Cantilever design - Tables: 2 - Loading System: Belt Feed - External Transport: Roller Conveyor - Enclosed Cabin: Yes - CE Marked: Yes --- For more information or to request a quote, please contact us.

SECOND-HAND 6 HEADS LINEAR COPYING SHAPER AND SANDER BACCI MOD. FC6 2500 – CE RULES - units 1-2 milling units - units 3-4 sanding units - units 5-6 sanding units - working length mm. 2500 - working height mm. 180 - n. 8 locking cylinders - cabin (4 sides + roof) - year 1999

SECOND-HAND LINEAR COPYING SHAPER BACCI MOD. FC8 2500 - Unit 1-2: milling units - Unit 3-4 milling units - Unit 5-6: sanding units - Unit 7-8: sanding units - Working height mm. 180 - Max. working length mm. 2500 - 8 locking cylinders -Cabin - S/N 1481 - CE year 2000

AUTOMATIC SLOT MORTISER type BACCI MOD second hand machine machine with cast iron structure machine according to CE regulations: YES electronic oscillation speed spindles with inverter max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.16 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9500 net weigth kgs. 700 volt. 380/50

SECOND-HAND COPYING LATHE WITH 4 SPINDLES BACCI AND SANDING UNIT TYPE T4MO 250 - spindles center distance 250 mm. - max. working lenght 1250 mm. - knives diam. 35 mm. - milling motor 11 Kw - longitudinal sanding unit - year 1999 - CE RULES

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

BACHILLER PC-200 Complete Process equipment (2004). Unused Processes: Dispersion, emulsion, humidification, grinding, homogenization, dissolution, mixing, suspension and vacuum deaeration. For suspensions, emulsions and dispersions. For the preparation of any liquid or pasty product since all manufacturing operations can be carried out in a single device, from the loading of the ingredients to the deaerated and preparation prior to packaging. It combines different basic elements of agitation such as the colloid mill, disperser and mixer-scraper ideal for suspensions, emulsions and dispersions. Sectors: pharmaceutical, cosmetic, food or chemical industry. In stainless steel The PC incorporates: - Agitation, grinding and dispersion devices with independent actuation. - Colloid mill with real grinding action, thanks to the milling of its elements and the regulation of sepa ...

AUTOMATIC TWIN TABLE SLOT MORTISER Type BALESTRINI 2/CAP RECONDITION MACHINE Max oscillating length mm. 120 Max. mortise depth mm. 80 Spindle collect diameter mm.13 Max. bit diameter mm. 20 Spindle motor power: Hp 3 Oscillating motor power: Hp 1 Spindle rotation: rpm 9000 Volt. 380/50

AUTOMATIC twin table SLOT MORTISER machine model BALESTRINI 2CAP second hand machine max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.13 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9000 net weigth kgs. 600 volt. 380/50

SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - positions 1-2 milling units - positions 3-4 milling units - positions 5-6 sanding units - positions 7-8 sanding units - positions 9-10 trasversal sanding units - working length mm. 2500 - working height mm. 180 - n. 10 pneumatic locking cylinders - SN 0 133 H2 - CE rules (year 2001)

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA machine for joining parts of chairs, living rooms, furniture, etc. the FTA machine is made up of 3 automatic operating units : 1st unit : circular saw for cutting workpieces to length 2nd unit : spindle moulder for milling with hydraulic sliding carriage 3rd unit : drilling unit with multiple center distance head . there are 9 work programs that can be selected and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 . hydraulic sliding carriage - Boring unit . engine power Hp 3 . max. depth drilling mm. ...

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

BALESTRINI TEAM automatic CUTTING , END MILLING and DRILLING MACHINE machine for joining parts of chairs, living rooms, furniture, etc. the TEAM machine is made up of 3 operating units: 1st unit: circular saw for cutting workpieces to length 2nd unit: spindle moulder for milling 3rd unit: drilling unit with multiple center distance head . there are 9 work programs that can be choiceed and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . all units are operated by a hydraulic pump to obtain adjustable and smooth movements Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 - Boring unit . engine power Hp 3 . max.  ...

Machine Details Stock-No. 1105-04003 Type of machine Machining Center - Vertical Make BARON MAX Type KAWA SEIKI VMC 32 Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis EX WORK Technical details x-travel 810 mm y-travel 510 mm Z-Travel 510 mm table surface area 1050 X 550 mm turning speed range - milling 60 - 8000 rpm control FANUC OM power capacity - milling spindle 7.5 kW tool taper BT 40 No. of tools in magazin 20 stations feed range 1 - 10000 mm/min Rapid traverse: 30 m/min total power requirement 25 kW Weight of the machine approx. 500 kg dimensions of the machine approx. 2300x2200x2600 mm Additional information nice machine WITH FANuc OM

CATALOG NUMBER 6056 TECHNICAL DATA - max height of the processed material 250mm - working length of the spindle 260mm - 40mm spindle diameter - worktop length / width 630x360mm - guide - 9.3 kW engine - 2 material clamps - pneumatic - diameter of the extraction connector 2x120mm - air demand 8bar - dimensions length / width / height 1370x980x1620mm - weight 450 kg - unpainted - cutters included, 2 pcs - Italian production - used milling machine, very good condition Net price: PLN 22900 Net price: EUR 5264 Net price, calculated at the rate of 4.35 PLN / EUR (with larger exchange rate fluctuations, the price may change)

Stock# UG6236 Little used vertical gap mill by Bauermeister (Germany) type GM 80.1 EX. Machine is driven by el motor 75 kW, 3000 rpm. Working output depends on product and can reach up to 800 kg/h. Maximal feed size up to 1.5 mm. Reported maximal output finess up to 200 microns. Mill has adjustable gap in range from 1 up to 5 mm and is equipped with ASIMA rotor working with speed up to 123 m/s. Milling elements designed in hardened steel. Mill has ATEX Ex II 1/2D T 100 C certificate. Shipping dimensions: L 2140 mm x W 1270 mm x H 1470 mm x W 1900 kg.

Code: 0471 Brand: BAUSOLA Model: SB/1 - CE Standard Automatic bevelling machine for shutter slats - CE Standard Technical data: Automatic mechanical milling machine to bevel edges with automatic copying device that guarantees perfect 30 ° chamfering or rounding on the perimeter of flat profiles Palette length from mm 130 to 800 Palette width from mm 15 to 100 Palette thickness from mm 6 to 30 Production/hour approx. 1500 pieces Overall dimensions: mm 1500 x 570 x 1370 h Weight kg 135

BAVARIAN BREWERY TECHNOLOGY - 80HL BREWERY WITH TANKFARM YEAR 2009, UPGRADED 2020 FORMER DARK STAR UK BREWERY Alan Ruddock Complete Malt Milling System with Steels Masher Bavarian Brewery Techology Mash Mixer Bavarian Brewery Techology Lauter Tun Bavarian Brewery Techology Brew Kettle Bavarian Brewery Techology Whirlpool Scada Control System (2020) HLT Vessel 1 8500 Litre HLT Vessel 2 8500 Litre CLT Vessel 20,000 Litre Brewhouse Pumps, Flowmeters, Valves, Pipework TANK FARM 6x Bavarian Brewery Technology Stainless Steel Jacketed Conical Fermenter, 9,000 litre 4x Biomashin Stainless Steel Jacketed Conical Fermenter 9375 litre, 2011 4x Biomashin Stainless Steel Jacketed Dish bottom tank, 9200 litre, Year 2012 TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter Also 37 bbl ...

BERNARDO BSG 4080 TDC surface grinding machine was built in Austria in 2018. Designed for fully professional production applications, the machine machines workpieces placed on a magnetic plate or directly on the work table with the utmost precision and accuracy. The hydraulically driven work table with a large magnetic platen moves on hardened and ground guideways, which have been additionally coated with a special Turcite-B coating to increase abrasion resistance. The hydraulic drive, in the form of a separate hydraulic unit with heat exchanger, prevents vibration and overheating, and also ensures safe table feed even under heavy loads. Radial and axial forces are evenly distributed on special bearings without play in the grinding wheel spindle. The BERNARDO magnetic grinding machine weighs 3400 kg. Technical specifications of the magnetic surface grinding machine BERNARDO BSG 4080 T ...

TECHNICAL DATA: 01 Saw Aggregate 02 Milling unit 01 Tenoning spindle

SECOND-HAND CNC WORKING CENTER 4 AXIS BIESSE MOD. ROVER 24 S 6.5 - Working dimensions: X = 3000mm ; Y = 1350mm ; Z = 155mm - Tool changer 9 slots - ISO 30 - Drilling head 16 spindles - Saw blade group - Axe C - Vacuum pump Becker 100 mc/h - N. 6 working consoles - 7.5 bars - CE (year 2001)

Technical details: - Premilling Unit - Corner Rounding Unit - Maximum panel thickness: 65 mm - Operating Units: 9