used Concrete pump vehicles for sale

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation

Leybold pump level Data on pump level:RUTA - Pump system RUTA 1001 (20900895586) (02209=Pre-pump:Leybold Sogevac SV300Cat: 109 31booster pump: Leybold Ruvac WAU1001Kat: 11741Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leakPerformance: 3 months22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use

Max. winder speed: 50 m/min Type: Film system 1600 mm usable width Equipment / Additional information: Max. gross output of up to 1300 kg/h A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm two nozzle lips: 0.2 to 1.8 mm & 1.4 to 3 mm Consists of: -Dosing system 5-chamber Maguire -Extruder (130 mm screw) Amut RIDUT.EA120 // Age: 2008 -Screen changer (for cleaning in food production) -Melt pump -Slot die 140 cm (2 inserts) (0.5 - 1.5 mm) (1.5 - 3 mm) -Calender 160 cm / Cooling & smoothing rolls -Post-cooling rolls (2 pcs.) -Winder (Film jam during roll jam) -Film draw-in -Film winders (3 pcs.) -Mill Rapid G200-48KURF // Age: 2014 Fully existing infrastructure; control cabinets, pumps, etc.

OEM Oil Pump - Blower Side (p.n. 47) for ABB VTR 400 Turbocharger The Pump is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

OEM Oil Pump - Turbine Side (p.n. 48) for ABB VTR 400 Turbocharger The Pump is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

Centrifugal pump made of stainless steel.

Anew ex works! Hydraulics - membrane pump Abel HMD-G-80-1000 long construction method conveyor achievement: max. 80 m? / h conveyor pressure: 15 cash engine: 45 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

Name: High Pressure Pump Manufacturer: Abel Type: AK57/105 Year of construction: 1977 Material: Normal steel Drive motor: 55 kW Dimensions: L 2500 x W 1100 x H 1000mm Empty weight: 1200 kg Speed: 326 rpm Flow rate: 240 L/min operating pressure: 100 bar Operating voltage: 380/660 V Protection class: 44 Flanges: DN 65 Condition: Used Note: Frequency range: 50 Hz, Protection class: 44, Flanges: DN 65 Price: On request

Compact diaphragm pump manufactured by ABEL in 2001 model CM-G-C261

System: piston diaphragm pump Manufacturer: Abel Type: CM G E272 Manufacturer no.: 10074 Construction year: 2013 Performance: 15 m3/h Pressure: 1.00 MPa Motor: 7,5 kW, 50 Hz

used pistons - membrane pump Abel CM-G-H-272 conveyor achievement: 15 m? / h conveyor pressure: 15 cash general-outdated!

used pistons - membrane pump Abel CM-G-H-272 conveyor achievement: 15 m? / h conveyor pressure: 15 cash engine: 11 kW, 400 V, 50 hertz, 1500 rpm,

used pistons - membrane pump Abel CM-G-C262 conveyor achievement: 12 m? / h conveyor pressure: 15 cash engine: 7.5 kW, 400 V, 50 hertz, 1500 rpm,

used pistons - membrane pump Abel CM-G-C262 conveyor achievement: 12 m? / h conveyor pressure: 15 cash engine: 7.5 kW, 400 V, 50 hertz, 1500 rpm,

used pistons - membrane pump Abel CM-G-H272 conveyor achievement: 15 m? / h conveyor pressure: 2 cash engine: 3 kW, 400 V, 50 hertz, 1500 rpm,

used pistons - membrane pump Abel CM-G-H272 conveyor achievement: 15 m? / h conveyor pressure: 15 cash engine: 11 kW, 400 V, 50 hertz, 1500 rpm,

System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz

System: Used piston - diaphragm pump Manufacturer: Abel Type: HMD-G-20-0125 Year of construction: 2001 Series: HM Machine number: 5100074 Material: GG Capacity: 18 m m³/h Delivery pressure: 15 bar Speed: 131 U/min Temp: MAX 100 ° C Operating voltage: 380 V Frequency range: 50 Hz Motor: 11 kW Protection class: IP55 Flanges: DN 80 Dimensions: 1.70m L x 1.30m W x 1.60m H Miscellaneous: forced ventilation 230/400V, 0.11 kW

used hydraulics - membrane pump Abel HMD-G-32-0250 long construction method construction year: In 2003 conveyor achievement: max. 20 m? / h conveyor pressure: 15 cash - with foreign fan the pump is steered about Frequenzumformer.

used hydraulics - membrane pump Abel HMD-G-32-0250 long construction method conveyor achievement: max. 30 m? / h conveyor pressure: 15 cash engine: 18.5 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer. the pump is complete with electric control.

used hydraulics - membrane pump Abel HMD-G-32-0250 long construction method conveyor achievement: max. 30 m? / h conveyor pressure: 15 cash engine: 18.5 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer. the pump is complete with electric control.

System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa

used hydraulics - membrane pump Abel HMD-G-50-0500 compact construction method conveyor achievement: max. 50 m? / h conveyor pressure: 15 cash engine: 30 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

used hydraulics - membrane pump Abel HMD-G-50-500 long construction method conveyor achievement: max. 50 m? / h conveyor pressure: 15 cash engine: 30 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan

used hydraulics - membrane pump Abel HMD-G-50-500 long construction method conveyor achievement: max. 50 m? / h conveyor pressure: 15 cash engine: 30 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

used hydraulics - membrane pump Abel HMD-G-50-500 long construction method conveyor achievement: max. 50 m? / h conveyor pressure: 15 cash engine: 30 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer. the pump is complete with electric control.

used hydraulics - membrane pump Abel HMD-G-50-500 long construction method conveyor achievement: max. 50 m? / h conveyor pressure: 15 cash engine: 30 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

used hydraulics - membrane pump Abel HMD-G-80-1000 compact construction method conveyor achievement: max. 80 m? / h conveyor pressure: 15 cash engine: 45 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

Machine Name: High Pressure Pump Manufacturer: Abel Type: HP-K-25-56 Year of Make: 2012 Degree of protection: IP 55 Speed: 1480 rpm Operating voltage: 4009 / 690 V Flanges: DN 80 Frequency: 50 Hz Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 14,400 l/h Dimensions: Approx. L 1600 x W 1400 x H 1600 mm Curb weight: 1500 kg Technical documentation: No Condition: Used Price: On request

Machine Name: High Pressure Pump Manufacturer: Abel Type: HP-K-25-56 Year of Make: 2004 Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 14,400 L/h Dimensions: L 2,000 x W 1,000 x H 1,000 mm Curb weight: 1,500 kg Tech. Documentation: Yes Condition: Used Price: On request

ABEL water high pressure pump VO - 0215 45 kW, 450 1 / min, 315 bar, Q 180, H 1000, N 62 The pump is dismantled and should be overhauled. A set of all wearing parts in new is available and can be purchased with. Length 160 cm, height 70 cm, depth 70 cm. Weight ca. 500 kg â?¬500 Site 76829 Landau Shipping via forwarding only possible and pick-up preferred, forklifts to load up there.

High Pressure Pump Material: regular steel Driving force: 55 kW Dimensions: approx. L 1800 mm x W 1100 mm x H 900 mm Empty weight: 1500 kg Flow rate: 14.5 m3/h Technical documentation: no Message: piston: 57mm, stroke rate: 326 min

Name: High pressure pump Material: Normal steel Engine drive: 55 kW Dimensions: approx. L 1800 mm x W 1100 mm x H 900 mm Kerb weight: 1500 kg Capacity: 14.5 m3/h Tech. Documentation: No Note: Piston: 57mm, Stroke number: 326 min

High Pressure Pump Material: regular steel Driving force: 55 kW Dimensions: aaprox. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Flow rate: 14.4 m3/h Operating pressure: 100 bar Technical documentation: no Message: piston: 57mm, stroke rate: 326 rpm, stroke: 105mm

Control : Heidenhain TNC 310 Table Clamping surface 1200 x 450 mm Longitudinal travel 650 mm Transverse travel 480 mm Vertical travel 475 mm T-slots 6 x 18 H7 Maximum load 400 kg Distance Distance between T-slots 65 mm Spindle centre to underside counter holder 160 mm Feeds Longitudinal feed speed 0 – 4000 mm/min Transverse feed speed 0 – 4000 mm/min Vertical feed speed 0 – 1500 mm/min Rapid traverse Longitudinal feed 4000 mm/min Transverse feed 4000 mm/min Vertical feed 1500 mm/min Spindle Spindle cone ISO 40 Spindle speeds, number 2 Speed range 55 – 3000 rpm Head rotatable 0 - 140° Engines Spindle motor, 2800 rpm 7.5 kW Feed motor, Z, AC 10.5 Nm Feed motor, X+Y, AC 3.0 Nm Cooling pump 0.12 kW Proviso Length 2200 mm Width 1800 mm Height 2000 mm Weight Net weight 2100 kg Gross weight 2300 kg

USED SULZER ABS AFP M40/4 SUBMERSIBLE SEWAGE PUMP

Submersible sewage pump manufactured by ABS. AFP10411 M30-4 model.

ABUS 6.3 t / 18.6 m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Year of construction: 2010 Type: ELK Cat type: GM 5000.6300 L-203.21.12000.3.E 160.20 Radio control : HBC-Radiomatic Micron 5 Wingspan : 18600 mm Chassis (sides): 3000 mm Load capacity : 6300 kg Weights : approx. 4570 kg Vacuum pump: KAPPEL vacuum lifter Com.P Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. VAT deductible Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

Technical data: Pan working capacity: 150 Kg. Pan speed: 5 - 15 RPM Pan outside diameter: 48 (1219.2 mm) Pan mouth diameter: 19 (482.6 mm) Base construction: Stainless steel Drive motor: 2 hp 1440 RPM Height: 75 (1917.2 mm) Floor space: 61 x 50 (1548.9 x 1270 mm) Weight: 1550 lb (700 Kg) Advanced Specifications flow tab system: A key feature of the Flowtab system is the unique spraygun, designed by BWI Manesty to improve coating efficiency, reduce operational downtime; and simplify cleaning. The automatic clean-out facility prevents fluid blockages within the nozzle, even during extended production cycles; Even at low atomising pressures, the spray rate and pump speed of the Flowtab can be controlled manually via the portable console or, automatically, from the ACS control console, without adjusting the sprayguns. Noted for their ability to deliver fast, flexible and co ...

Travel XYZ: 300-135-270 Spindle holder: Iso 30 Spindle speeds: 100-2000 Table size: 600x195 Automatic feed to the X-axis Manual speed on the X-axis Fraeskop 360° rotating Tilt table li and re rotate 30° Cowlmittel pump With vice With tool holder ER25 with some collets CE marking

Milling machine Aciera F3 Travel XYZ: 300-135-270 Spindle holder: Iso 30 Spindle speeds: 100-2000 Table size: 600x195 Automatic feed on the X-axis Manual gear on the X-axis Feed of the Y-axis can be optionally between threaded spindle or rack and pinion Fraeskop 360° drehbahr Tilting table li and re 30° rotate Engine brake Kuhlmittelpumpe With vise With tool holder with collets CE marking

Order No. 6761 TECHNICAL DATA 6 hydraulic cylinders: - 4 upper - 2 side - max. length of glued elements 3100mm - max height of glued elements 1600mm - pump motor power 1.5kW - dimensions length / width / height 4320x1500x1120mm - weight kg ADVANTAGES - unpainted - possibility of gluing in vertical and horizontal position - used press - very good condition PRODUCT FEATURES The press is designed for assembly of all rectangular frame structures, e.g. doors, windows of various dimensions. An additional hydraulic cylinder is responsible for the possibility of gluing in the vertical and horizontal position. Net price: PLN 18 900 Net price: EUR 4021 Net price, calculated at the rate of 4.70 PLN / EUR (with greater fluctuations in the rate, the price may change)

TECHNICAL SPECIFICATIONS Manufacturer: ADREBA Description: Floating suction dredger Type: Type III Design: Floating on pontoon construction Year of construction: 2000 Excavation depth: 53 m Slurry pump: PK 350-185U Number of mooring winches: 4 pcs. Submersible motor Manufacturer: Marotechniek Unterwasser E-Motor Type: MTOWA-355-4-0691 (400 kW) Jet Pump Manufacturer: IDRECO Type: Norma VdK1 100-250.2 Power/pressure: 77.4 kW / 8 bar BOOSTER PUMP Manufacturer: ANDRITZ Standard Pump Type: ES 100-250.2 Power/pressure: 59.4 kW / 16 bar SPECIFIC COMMENT - Technically very good condition, fully functional - Incl. 20 kV cable with buoys, 300 m - Incl. spare engine (400 kW), Newly overhauled - Incl. spare mooring winch with motor

63mm x 2mm AEF / Thermatool ERW Tube Mill Make: AEF (American Electric Fusion) Tube Diameter: 15mm – 63.5mm Material Thickness: 0.5mm – 2mm Tube Length: 6 meters Double Mandrel Uncoiler Entry Shear & End Welder TIG Power Supply Vertical Accumulator Make: Kent Driven Entry and Exit Pinch Rolls Strip Guiding Unit Forming Mill Individual Gear Boxes Universal 50HP DC Motor Six (6) Forming Stand Five (5) Side Stands Welding Section Make: Thermatool Type: Vacuum ERW Design Power: 200Kw Mechanical Welding Head Beat Removing Head with Winder Cooling Tank & Pump

Centrifugal pump Manufacturer: AEG Year of construction: 1992 Power: 7.5 kW Speed: 2900 rpm LBH: 680 x 320 x 300 mm

Power:107 kW Year of manufacture: 2008 Type of refrigerant: R407C Refrigerant circuit: 2 pcs. Compressors: 3 pcs. Danfoss (scroll) Hydraulic module: 1 pc. water pump, buffer tank, expansion vessel Number of fans: 2 pcs. Dimensions: 3.00+0.26x 1.12x1.90 m Weight: 1140 kg Condition: excellent

Cooling capacity: 969 kW (12/7 — 35°C) Heating capacity: 1002 kW (40°C/45°C - 7°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Number of fans: 18 pcs. Heat exchanger: Plate Options: Heat pump, High Efficiency, Hydraulic module Hydraulic module: 2 pcs. water pump, expansion vessel Type of refrigerant: R410A Compressors: 6 pcs. Copeland (scroll) Dimensions: 2.24 x 2.20 x 10.71 m. Weight: 8 120 kg. Working hours: 256/256/1006/10046/10049/10055 Condition: Exsellent, Outlet

Our Aerzen GL7500 roller piston vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty After refurbishing, our Aerzen GL7500 Roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

new Aerzen vacuum pump GM 2000 CM - Y 11 KW for frequency inverter operation Built in 2010 New, original packed 2800 m3 / h Price is unit price net, plus 19% VAT 6 pieces available

Advantages of Aflatek Air200W 5.5kW: -Multistage, 3 cylinder air compression. -Easy to use. -Air filter on each pump. -Large air tank, longer operation time. -Mounted on 4 wheels. Technical data: Descriptions Air200W 5.5kW Power supply , V: 3Ph 400V 50Hz Motor power, kW: 5.5 Motor power, HP: 7.5 Air supply, L/min: 670 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank, L: 200 Dimensions(length x width x height), mm: 1350x500x1020 Weight, kg: 135 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1525x525x1115 Weight, kg: 165 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.