machines and plants for waste disposal and recycling used for sale

used Hazemag 10/27-1 Grizzly. Screening machine Hazemag 10/27-1 Brand: Hazemag Type: Grizzly Screening area: 2700 x 1000 mm - 1 decker Drive: 11 kW electric motor

used Metso 15/40-3. Screening machine Metso 15/40-3 Brand: Metso Screening area: 4000 x 1500 mm - 3 deckers Drive: 15 kW electric motor

used Eichinger 2041.10. Eichinger 2041.10 waste box van; Volume 750L; Load capacity 300kg; tilting; on wheels. Waste box wagon Eichinger 2041.10; capacity 750L; lifting capacity 300kg; tiltable; with rolls.

used Monsuna AKS A4 Tire washing system. ID3574 Monsuna AKS A4 year/Baujahr 2014 Tire washing system for commercial vehicles, Monsuna type AKS A4 series, including tank, control system, signaling system, and contact loop for automatic operation. The washing zone is fully galvanized. The water supply is fully integrated into the module frame. Passage zone: 4000 mm long x 3100 mm wide (clear passage width: 2900 mm). Weight: approx. 5,000 kg (2 washing modules, each with a capacity of 2,500 kg). Tank: 7000 mm long x 3000 mm wide. Weight (unfilled) approx. 3,560 kg. Tyre washing system for commercial vehicles Monsuna type AKS A4 incl. tank, control system, signalling system and contact loop for automatic operation, the washing zone is completely galvanised, water supply is completely integrated into the module frame, passage zone: 4000 mm long x 3100 mm wide (clear clearance width: 2900  ...

used JOVAL TL-1200/155. - With hydraulic pusher - Year: 2004 - Engine: 75 hp (55 kW) - Hopper dimensions: 1118 x 1990 mm - Cutting chamber: 1200 x 370 mm -Rotor: Orbit diameter: 370 mm Cutting speed: 1500 rpm Num. blades: 26 -52 (variable depending on the material to be treated) - With 3 sets of grille: Ø20, Ø30,Ø35 mm - Spare gearbox - Extra hopper 3000 x 2200 x 1600 (height) mm

used PAAL Konti 275 D. Specifications Maximum pressure: 75 tons Year of Make: 1999 Press force: 90.9 t/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1550 mm Bale weight: 500-750 kg Weight: approx. 25 tons Power connection: 400 V Bale tying: automatic Motor: 75 kW (possibility of switching to 55 or 45 kW) Press capacity at idle: max 750 m³ / hour Press capacity under operating conditions: max 350 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 12 tons/hour Theoretical throughput to density 60 kg/m3: approx. 21 tons/hour Theoretical throughput to density 100 kg/m3: approx. 33 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic ...

used Schlüter BS 1. used barrier scrap shears Manufacturer: Schlüter Type: BS 1 Year of Make: 1973 specifications: Performance with a material strength of 40 kp/mm²: Round bar: up to 40 mm Square bar: up to 35 mm Sheets: up to 15 mm Pipes up to 6 mm wall thickness: 300 mm Railway sleepers: all normal grades Angle iron: 100 x 100 x 10 mm Knife Dimensions: Knife length: 600 mm Knife opening front: 310 mm Knife opening rear: 140 mm Cutting rate: 30/min. Drive power: 7.5 hp / 5.5 kW Dimensions: Length: approx. 4,000 mm Width: approx. 1,400 mm Height: approx. 2,000 mm Weight: approx. 3,600 kg Description of the machine: Due to the extremely large blade opening, it is particularly suitable for light, bulky scrap. It is designed in a mobile version with drawbar and has a shear coupling as extensive protection against ...

used Hazemag APP 1013. Impact Crusher Hazemag APP 1013 Brand: Hazemag Type: APP 1013 Inlet opening: 1300 x 1000 mm. Incl.: 250 kW electric motor.

used HSM FA 400 CC. Specifications Cutting width: 3.8 x 50 mm Year of Make: 1995 Power connection: 400 V/ 4 kW Price: on request Cutting speed: 354 mm/s Safety level: DIN 66399 O-2/P-3/T-3/E-2/ Cutting Type: Particle Cut Working width: 428 mm

used. We offer this powerful single-shaft ripper specially designed for the primary shredding of plastic materials, textiles, wood or industrial waste. Equipped with an 800x1200 mm cutting chamber, a 40x40 mm socket and a robust 40 hp (29.42 kW) motor, this equipment ensures efficient and continuous cutting. Thanks to its integrated hydraulic pusher, the material is fed with constant pressure into the rotor, optimizing performance and preventing jamming. It is ideal for processes prior to granulation, recycling or volume reduction. Specifications: ✅ Type: 1-Shaft Ripper ✅ Cutting chamber: 800 x 1200 mm ✅ Main engine: 40 hp (29.42 kW) ✅ Hydraulic Pusher: Included ✅ Cutting socket: 40 x 40 mm ✅ Robust structure and easy maintenance Common Applications: Shredding of hard and soft plastics Preparation of waste for recycling Volume reduction of industrial ma ...

used Erdwich EKZ1100. Cardboard shredder Erdwich EKZ1100, built in 2012 Specifications: Manufacturer: Erdwich Shredding Systems Type: EKZ 1100 Year of Make: 2012 Drive power: 7.5 kW Cutterbar size: 1095 x 700 mm Discharge height: 800 mm Discharge depth: 870 mm Feed height: 690 mm Feed height: 1200 mm Dimensions: 2390 x 1480 x 2265 mm (LxWxH9 Weight: 950 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

used Busch SF 110/50 ASE Chip conveyor belt. Year of construction 2006 Chip conveyor belt Mobile substructure Delivery date: immediately Ref: BU250081A Price on request. We supply and install worldwide.

used PAWERT SPM I 90/200. For sale is a top-equipped system for briquetting including silos, conveyor technology and packaging unit, consisting of the following components: For sale is a comprehensive briquetting plant including silos, conveyor technology and packaging unit, consisting of the following components: Silo and discharge technology 2x steel silos, each approx. 20 m³ usable capacity Including silo discharge systems Briquetting presses 1x Briquetting press SPM PAWERT AG, Type 84/1 - I 90/200, Masch.-Nr. 1060, Power: 55 kW 1x Briquetting press SPM PAWERT AG, Type 96/1 - I 90/200 SBP, Masch.-Nr. 1140Bj.2021 Conveyor and transport system Complete transport route including: • - 2 cooling lines • - All conveyor belts, roller conveyors and accessories Cutting & packaging technology 2 cross-cut stations with noise protection cabin 1 Feeder KÖRA Packmat, type presum ...

used KASU VACUMET Vacuum device. Vacumet High-Tech Waste Management System Demonstration machine as good as new Tank size: 142 litres Volume reduction: 50 - 70 % Body material: powder-coated steel Weight: 198 kg Degree of protection: IP 54 Connected loads: 230 V 50 Hz 1 kW Control: PLC Noise level: 60 db Tested / Safety: EN 60204 - VDE 0113 Dimensions: W: 920 x D: 750 x H: 780 mm kasu - vacumet is a modern machine for disinfecting the exhaust air and reducing waste. Vacuum and the introduction of an odour blocker neutralise unpleasant odours, trap bacteria and viruses and contain bacterial carry-over. Due to the subsequent sealing of the foil bags and flooding of the chamber with atmospheric pressure, a pressure of approx. 8,000 kg/m² acts on the PA/PE garbage bag, thus achieving an enormous volume reduction.

used LIM CP 1100. Container Press SMC/CP 1100 Used Equipment Used device is kpt. reconditioned, wear parts were replaced, incl. oil change and new hydraulic hoses incl. UVV safety test and protocol, 6 months warranty Pressing force: 3.5 tons Swivel stroke: 95 degrees Connected load: 230 V/ 1.5 KW Machine dimensions: 980x 1190x 1900 mm WxDxH Machine weight: 250 kg

used Hazemag APPH 1315. Impact mill Hazemag APPH 1315 Brand: Hazemag Type: APPH 1315 Inlet opening: 1500 x 1200 mm. Incl.: electric motor and spare parts.

used ASCO Vibration Screen 1600x1000. Demonstration machine little used Great condition Double-decker sieve In no time at all I plugged it in and it sieves ! Screening area 1600x1000 Double deck Steel frames, folding boards

used Komplet K-JC503 Jaw crusher 500x300 on chain. Jaw crusher on chain, mobile, Kompline K-JC503 Crusher 500x300 678 BH Hours Year of manufacture 2021 Machine is dry, signs of use due to use It is given 1 crushing jaw and 1 blowing bar. As is where is

used Dixi 80 SLD. Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2016 Hours: 1030 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Note: The press is in very good condition. The hydraulic hoses were to be replaced. The operating instructions are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by a ...

used Metso CFBK CC108/4 + CC126/3. Screening machine Metso/CFBK Brand; Metso /CFBK 2 units in stock: Type: CC 108/4 Screen area : 6000 x 1800 mm - 4 deckers Drive: electric motor 22 kW. Type: CC 126/3 Screen area : 6000 x 2100 mm - 3 deckers Drive: electric motor 22 kW. Incl.: springs.

used Metso BB1600mm. Conveyor belt Metso Brand: Metso A.A Length = 8000 mm. Belt width: 1600 mm. Drive: 5.5 kW. 2 pieces In stock: 1 used and 1 unused.

used Koventa HLP 5. Vertical baler Built in 1991, overhauled by us Press pressure 4.5 tons Bale format 550mm w x 400mm d Binding 3-fold vertical, manual External dimensions 770 x 770mm, height 1,930 mm Weight approx. 400 kg Bale weights 50-80 kg, depending on the material

used LCSSR - 01. Line for cleaning scrap synthetic rubber (LCSSR - 01). Line for moisture removal and rough cleaning of defective synthetic rubber is our know-how, it includes individual technological machines, specially choiceed and modified for this technology. All technological machines were produced in different companies in Ukraine, Croatia and China in 2021. All technical parameters in presentations. Presentations: SL196605gmail , WhatsApp +385916225468

used Hein Lehmann flip/flop LF1.0-3.78/12ed. Screening machine Hein Lehmann LF 1.0-3.78/12 ed Brand: Hein Lehmann Type: flip/flop Screening area : 3800 x 1000 mm - 1 decker Incl.: 5.5 kW electric motor

used Paal Likon 80/60. Baler Paal Likon 80/60, built in 2004, very good condition Specifications: Manufacturer: Paal Type Likon 80/60 Year of manufacture 2004 Pressing force 60 t Drive power 75 kW Total power 94 kW Filling opening 1600 x 920 mm Bale dimensions 800 x 1000 mm, length variable 4-fold automatic tying Throughput 320 m³/h Throughput at 65 kg/cbm approx. 21 t/h Bale weight 660-1100 kg Transport dimensions approx. 9405 x 2200 x 2500 mm (LxWxH) Machine weight approx. 13 t Accessories: Funnel Version with a 520 l pump, drive 75 kW, for an increase in power to approx. 320 cbm/h under operating conditions, including oil cooling. Materials: paper, cardboard, foil, wood fibers, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28 ...

used press baler. For Sale: Hydraulic Baler Total length: 8.30 m Total width: 1.60 m Total height: 2.80 m Feed hopper width: 2.00 m Feed hopper height: 0.90 m Horizontal tying: 4 times Motor power: 15 kW Full bale ejection system Good working condition. For more information, please contact.

used HSM 500.1 VL. Press pressure 50 tons

used PAAL Pacomat 5. Maximum pressure: 50 tons Year of Make: 2006 Pressing force: 7.14 kg/cm² Number of bindings: 3 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 1250 x 950 mm Bale weight: do 500 kg Weight: approx. 10 tons Power connection: 400 V/ 22 kW Bale tying: automatic

used SBM Grizzly 13/30-2. Screening Machine SBM Austria 13/30-2 Brand: SBM Austria Type: Grizzly Screening area : 3000 x 1300 mm - 2 deckers Incl.: 22 kW electric motor and springs.

used Metso NP 1418. Impact mill Metso Brand: Metso Type: NP 1418 Inlet opening : 1800 x 1200 mm Incl.: 315 kW electric motor Weight about 25 tons

used STADLER. Used Rotary Drum / Screen Drum Manufacturer: Stadler Type: Sorting Drum Year of manufacture: unknown specifications: Diameter: approx. 2,500 mm Length: approx. 8,200 mm Perforation: 50 x 50 mm Weight: approx. 20,000 kg without steel frame, without catwalks, without lanyard

used Ammann BB650mm. Dosing conveyor belt Ammann Brand: Ammann A.A Length = 1700 mm. Belt width: 650 mm. Drive: 1.5 kW slip-on gearbox In stock: 7 pieces.

used Hazemag BB1400. Steel Link Conveyor Belt Hazemag Brand: Hazemag Dim.: A.A. 12,000 mm, belt width 1400 mm Drive: 37 kW electric motor, Brand: Flender Weight: about 38 tons.

used Haver + Böcker 20/60-2 Niagara. Screening machine Haver & Böcker 20/60-2 Brand: Haver & Böcker Type: Niagara Dim. screening machine: 6000 x 2000 mm – 2 deckers. Excl.: electric motor. In stock 2 pieces: 1 used and 1 unused.

used Austropressen AP 25. Baler Austrobalen AP 25, semi-automatic, with lift-tilt device, year of construction 2020 Specifications: Manufacturer: Austropresse Type: AP 25 Year of Make: 2020 Press force: 25 t Cycle time: 35 s Drive power: 7.5 kW Filling opening: 1500 x 940 mm Binding: 3-fold, manual Bale dimensions: 1000 x 750 x 1200 mm Bale weight: 200-300 kg Machine weight: approx. 3400 kg Materials: paper, cardboard, foil, metals, foams, etc Note: The press is in very good condition. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guar ...

used Terex TTS620. ID3557 Terex TTS620 year/Baujahr 2018 approx. 4.150 hours/hours 19 t Drum screen, with main and side discharge belt, with cleaning brush, drum length 5.5 m, drum diameter 2.0 m, screen perforation 15 mm, CAT engine Drum screen, with main and side discharge belt, with cleaning brush, drum length 5.5 m, drum diameter 2.0 m, screen perforation 15 mm, CAT motor

used ZD-500. ZD-500 plastic shredder was built in 2019 in China by Taizhou City Luqiao Qijin Wire Feeling Machine Manufacturing Factory. The machine is used in the processing of a wide range of raw materials, i.e. plastics, wood and aluminium. The machining process is performed inside a large working chamber, equipped with a rotor with 20 cutting knives. The number and positioning of the cutting knives prevents the machine from jamming on harder materials, resulting in smooth and problem-free shredding. The offered ZD-500 double-shaft shredder is a guarantee of stable and efficient operation for many years of intense challenges. The total weight of the machine is approximately 2000 kg. Technical specifications of the ZD-500 plastic shredder - processed materials: plastics, wood, aluminium, textiles, municipal waste, medical waste etc. - rotor diameter: 290 mm - number of cutting kn ...

used Hazemag BB1400mm. Steel Link Conveyor Belt Hazemag Brand: Hazemag Dim.: A.A. 12,000 mm, belt width 1400 mm Drive: 37 kW electric motor, Brand: Flender Weight: about 38 tons.

used Intimus 444 SE. Specifications Cutting width: 3.8 x 40mm Productivity (80g/m²): 65-75 Power connection: 400 V / 2.2 kW Year of Make: 1993 the safety level DIN 66399: P-4 / O-3 / T-4 / F-1 / E-3

used Schleicher 490 SE-H/1490-H. Specifications Cutting width: 3.8 x 40mm Productivity (80g/m²): 65-75 Power connection: 400 V / 2.2 kW Year of Make: 1990 the safety level DIN 66399: P-4 / O-3 / T-4 / F-1 / E-3 If you have any questions, please call us: +48 696 072 985