presses used for sale

Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2016 Hours: 1030 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Note: The press is in very good condition. The hydraulic hoses were to be replaced. The operating instructions are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The s ...

Baler Paal Likon 80/60, built in 2004, very good condition Specifications: Manufacturer: Paal Type Likon 80/60 Year of manufacture 2004 Pressing force 60 t Drive power 75 kW Total power 94 kW Filling opening 1600 x 920 mm Bale dimensions 800 x 1000 mm, length variable 4-fold automatic tying Throughput 320 m³/h Throughput at 65 kg/cbm approx. 21 t/h Bale weight 660-1100 kg Transport dimensions approx. 9405 x 2200 x 2500 mm (LxWxH) Machine weight approx. 13 t Accessories: Funnel Version with a 520 l pump, drive 75 kW, for an increase in power to approx. 320 cbm/h under operating conditions, including oil cooling. Materials: paper, cardboard, foil, wood fibers, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find ...

Baler Austrobalen AP 25, semi-automatic, with lift-tilt device, year of construction 2020 Specifications: Manufacturer: Austropresse Type: AP 25 Year of Make: 2020 Press force: 25 t Cycle time: 35 s Drive power: 7.5 kW Filling opening: 1500 x 940 mm Binding: 3-fold, manual Bale dimensions: 1000 x 750 x 1200 mm Bale weight: 200-300 kg Machine weight: approx. 3400 kg Materials: paper, cardboard, foil, metals, foams, etc Note: The press is in very good condition. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

Baler Macpresse MAC 111 / 1, press force 170 t, year of construction 2008 Specifications: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 111 /1 Year of Make: 2008 Operating hours: As of March 38751 Pressing force: 170 t Drive power: 2 x 55 kW Mains voltage: 400 V / 50 Hz Filling opening: 1800 x 1020 mm Bale chamber volume: 2.7 m³ Bale size: 1100 x 1100 mm (H x W) Throughput / mixed paper: 30–35 t/h Binding: 5-fold horizontal Transport dimensions: approx. 11,500 x 2,300 x 2,845 mm (L x W x H) Press weight: approx. 39,000 kg Accessories: Funnel, Wirbulator Note: The press is still in operation until 16.05.25 and can be viewed in use on request. The conveyor belt seen in the photos is not included. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any  ...

Strautmann baler, type BaleTainer, press force 60 t, year of construction 2012 - In supply Specifications: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of Make: 2012 Pressing force 60 t Motor power 5.5 kW, 400 V Total connected load 11 kW Filling opening height 1370 mm Filling opening width 1069 mm Bale dimensions 1,100 x 1,100 x 800 mm (WxDx H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with feed: 6,355 x 2,056 x 2,756 mm (LxWxH) Weight approx. 7,050 kg Materials: paper, cardboard, PET bottles, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance paym ...

Presto HPK 50 HS baler, built in 2014 Manufacturer: Presto Type: HPK 50 HS Year of Make: 2014 Drive: 30 KW Press force: 50 t Hours: 3514 Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Materials: paper, cardboard, foil, PET bottles Remark: The press is in good condition. We recommend replacing blades/counter-blades and sliding and guide plastics. The hydraulic hoses are from 2017. These should be replaced together with the filter. The operating instructions and CE declaration are available in digital form. Please note: All technical data refer to the manufacturer's specifications. We as ...

Baler Presona LP 50 VH1, built in 2009, press force 50 t, including perforator Technical data press: Manufacturer: Presona Sweden Type: LP 50 VH1 Year of Make: 2009 Press force: 50 t Drive: 22 kW Throughput rates with bulk density of 30 kg/m³: 6-7 t/h 50 kg/m³: 7-9 t/h 100 kg/m³: 11-14 t/h Filling opening: 1500 x 1100 mm Bale size: 1100 x 720 mm Volumetric weight: approx. 400-550 kg/m³ Binding: 5-fold Transport dimensions: approx. 8800 x 2200 x 2400 mm (LxWxH) Weight: approx. 18,000 kg Materials: paper, cardboard, foil, PET Accessories: Perforator The operating instructions and EC declaration of conformity are available in English. Remark: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video at the top of the pictures, or on our website or our Youtube channel. Viewings, also under power, are possi ...

HSM baler, type HL 7009 Re, with lift-tilt device, year of manufacture 2016 Specifications: Manufacturer: HSM Type: HL 7009 Re Year of Make: 2016 Engine hours: 287 Pressing force: 70 t Specific pressing force: 58 N/cm² Cycle time of the lift-tilt device: 17 s Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Remark: The machine is in very good condition. A new, original HSM master cylinder was installed. The press was inspected and tested by us in 28816 Stuhr. You can find the video at the top of the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your mate ...

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

1 PAAL horizontal tunel press type PAC, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material

Screw trough approx. 2,800 x 660 mm, screw diameter: 370 mm, 2-cylinder solids pump SP2180-400, capacity 8 cbm/h, with a distribution station and hydraulic unit with 55 kW

Specifications Maximum pressure: 75 tons Year of Make: 1999 Press force: 90.9 t/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1550 mm Bale weight: 500-750 kg Weight: approx. 25 tons Power connection: 400 V Bale tying: automatic Motor: 75 kW (possibility of switching to 55 or 45 kW) Press capacity at idle: max 750 m³ / hour Press capacity under operating conditions: max 350 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 12 tons/hour Theoretical throughput to density 60 kg/m3: approx. 21 tons/hour Theoretical throughput to density 100 kg/m3: approx. 33 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Cho ...

For sale is a top-equipped system for briquetting including silos, conveyor technology and packaging unit, consisting of the following components: For sale is a comprehensive briquetting plant including silos, conveyor technology and packaging unit, consisting of the following components: Silo and discharge technology 2x steel silos, each approx. 20 m³ usable capacity Including silo discharge systems Briquetting presses 1x Briquetting press SPM PAWERT AG, Type 84/1 - I 90/200, Masch.-Nr. 1060, Power: 55 kW 1x Briquetting press SPM PAWERT AG, Type 96/1 - I 90/200 SBP, Masch.-Nr. 1140Bj.2021 Conveyor and transport system Complete transport route including: • - 2 cooling lines • - All conveyor belts, roller conveyors and accessories Cutting & packaging technology 2 cross-cut stations with noise protection cabin 1 Feeder KÖRA Packmat, type presumably EF-235 1 shrink pack ...

Container Press SMC/CP 1100 Used Equipment Used device is kpt. reconditioned, wear parts were replaced, incl. oil change and new hydraulic hoses incl. UVV safety test and protocol, 6 months warranty Pressing force: 3.5 tons Swivel stroke: 95 degrees Connected load: 230 V/ 1.5 KW Machine dimensions: 980x 1190x 1900 mm WxDxH Machine weight: 250 kg

Vertical baler Built in 1991, overhauled by us Press pressure 4.5 tons Bale format 550mm w x 400mm d Binding 3-fold vertical, manual External dimensions 770 x 770mm, height 1,930 mm Weight approx. 400 kg Bale weights 50-80 kg, depending on the material

Make: SCS Type, Year of manufacture: 2008, Engine power: 75 kW, Lateral Compression: 140 tons, Bale size: 300 x 300 mm, Total length: 6.000 mm, Width: 1.750 mm, Height: 2.750 mm, Production from-to: 80-100 balers/h, Weight: 16 Tons

For Sale: Hydraulic Baler Total length: 8.30 m Total width: 1.60 m Total height: 2.80 m Feed hopper width: 2.00 m Feed hopper height: 0.90 m Horizontal tying: 4 times Motor power: 15 kW Full bale ejection system Good working condition. For more information, please contact.

Press pressure 50 tons

Maximum pressure: 50 tons Year of Make: 2006 Pressing force: 7.14 kg/cm² Number of bindings: 3 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 1250 x 950 mm Bale weight: do 500 kg Weight: approx. 10 tons Power connection: 400 V/ 22 kW Bale tying: automatic