We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 401)
used
used
Auger filler,stainless steel,All Fill,for dosage of powder/granulate.
used
DAXNER Pneumatic conveying system for coffee / bulk materials – complete – year of construction 2012 For sale is a high-quality and fully equipped pneumatic conveying system from the manufacturer DAXNER, specially designed for the gentle conveying of coffee and similar bulk materials. Technical data: Manufacturer: DAXNER (Austria) Year of construction: 2012 Flow rate: approx. 900 kg/h Conveying type: pneumatic (side channel blower) Product: coffee / light bulk materials Operation: continuous Scope of delivery: Side channel blower Receiver container / separator Valves and control system Complete, functional system Special features: Very gentle conveying (ideal for sensitive products such as coffee) Low-dust / closed conveying Robust industrial design Immediately ready for use Condition: Used, Viewing possible by arrangement. Further information and pictures are avai ...
used
J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to contro ...
used
used tube filling and sealing machine, automatic, rotary Manufacturer TGM-Tecnomachines s.r.l. Type E 250 MATIC Serial No. 27E250678/06 Year of construction 2006 Capacity: 800 – 3,200 tubes / hour Tube height: 50 – 235 mm Diameter: Ø 10 mm – 50 mm Closure: Hot air device (HA) Tube Loading Station with Magazine, Tube Alignment, Presence Control Tube, Tube Centration, Filling Station, Hot Air Group, Tube Coding, Tube Cutting Station, tube output, Various format sets and spare parts Electrical connection 400 V, 50 Hz, 16 A, 3/N/PE, connected load 6.5 kW Heatable stainless steel funnel with piston feeder, filling volume mechanically adjustable Round plates with interchangeable, format-bound tube holders Sealing via hot air and welded/pre-baked with batch or date embossing Photoelectric tube control, level probe, agitator/bridge breaker, piece counter Machine con ...
used
Used bottling line for packaging oil / olive oil made by Robak. New 2018. The line is currently configured for 250-ml and 500-ml Marasca glass bottles. The filling and capping machines are set up for these capacities. The manufacturer also offers the option to fill round and plastic bottles of various capacities with this setup. It has primarily operated with 500 ml bottles, resulting in a production rate of: 1,000–1,200 bottles per hour. Total number of bottles produced: approximately 486,000. The line began operation in 2020. The line consists of the following components: 1. ANM-08 automatic bottle filler - 10 filling heads with Coriolis mass flow meters - Capacity: up to 1,500 bottles/hour 2. ZR-02 single-head automatic capping machine and MPZ-01 mechanical cap feeder - Capping machine equipped with a head for 31.5x24 aluminum caps - Capping machine capacity: up ...
used
Bosch / Skinetta complete ampoule line Used Bosch/Skinetta line for processing open glass hopper and spit ampoules. The line includes machines for washing, sterilizing and depyrogenating, filling, closing, labeling, cartoning and tightening. The maximum line output is up to 18,000 ampoules per hour, depending on the ampoule size. Format parts for 1 ml ampoules are included. The plant was completely dismantled in January 2026 and is unpacked at the operator in China, near Hong Kong. Plant data Manufacturer: Bosch / Skinetta Year of manufacture according to available information: 2009 Location: China, near Hong Kong Delivery condition: disassembled and unpacked Components of the line Bosch RRU 3063: Ampoule washing machine Bosch HQL 2220: Sterilization and depyrogenation tunnel Bosch ALF 4060: Ampoule filling and sealing machine Bosch ERS 2010 (500): Ampoule label ...
used
Hamba BF2400 Cup Filler, completely overhauled, 12-piece plate, 75 cup format, consisting of from: beaker station, dosing unit with container,products: pastes, sauces,... Lidding station, sealing station, lifting and Pushing, protective covering, control cabinet
used
Excellent quality and condition. Fully automated and programmable. Can fill from 3 to 20 litres. Can extract air and introduce gases on filling completion. Bag and litre counting.Very fast filling, filler tank float switch cut off. 3 phase. Runs with an air compressor that could be included, maintenance spares, seals etc included.
used
Multihead weigher with automatic packaging machine. The plant is in mint condition. Viewing: by arrangement Material: Stainless Steel Bag length: 450 - 800 mm Bag width: 150 - 300 mm Weight of packing machine: 800 kg Packing speed: 30 - 70 bags/min Control: Siemens Smart Line Electr. Total power: 2.2 kW Total weight: 1,300 kg Disassembly: by buyer or on request
new
Filling and sealing machine for pre-filled syringes Manufacturer: Rota Type: RSM 05 Year of manufacture: 2018 Exhibition machine Incl. 12 months warranty and FAT at the manufacturer's factory Test run and inspection possible by arrangement at the manufacturer's plant. Option: In addition to pre-filled syringes, cartridges can also be processed on this machine. This requires additional format parts as well as the mechanical and electrical retrofitting of an additional station. Download Layout: 04-J010_Layout Download Technical Overview: 04-J010_RSM05_Technical_Overview Download Technical Data: 04-J010_RSM05_Technical_Data_01.06.2026 Subject to technical changes
used
used aseptic filling line SIG-COMBIBLOC, Type CFA 310-32, built in 2004. Capacity: 10,000 E/h Packaging type: C3, (1ltr. slim) Included: - Automatic unpacker and feeding of blanks - Closure applicator - Tray packer - Vertical buffer - Various conveyors - Control cabinets, etc. Dismantling by the buyer Location: EU country
used
Tube Filling & Sealing Machine (Plastic) Manufacturer: SpeMaBa/Gustav Obermeyer Type: TUFÜBA 40 PE Year of Make: 2006 • For plastic tubes (HDPL, LLDPL) • Welding by hot air • 9 tube holder stations • Capacity max. 40 tubes/min • For tube Ø 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosage 20-220 ml depending on the dosing pump • 1 rotary vane dosing pump 10-100 ml (1 additional as a replacement) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling unit • Print mark control (alignment of the tube to the printed image) • Embossing 1-line • 2 tube holder format sets: tube Ø 25 mm, tube length 90 mm, tube Ø 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labeling machine 05-0179
used
TBA 19 200 slim line with HI kit was producing 180 ML Hours 65238 PLC upgraded to RX3i TSA 21 2004 Multishrink Conveyors
used
Measuring Cup Attachment Manufacturer: Montech Type: Year of Make: 2012 For measuring cups 2.5-15 ml for PP28 closure Measuring cup Ø 37/30 mm, height 28 mm Feed hopper with steep conveyor, mobile Steep conveyor plastic webbing white, belt width 500 mm, belt length 2,200 mm, bridge distance 120 mm, web height 25 mm Measuring Cup Sorting Pot with Enclosure Transfer conveyor to the transfer robot Transfer robot with horizontal and vertical axis Suction arm for 3 measuring cups for transfer to bottle conveyor belt Bottle size Ø max. 90 mm, height max. 140 mm PLC Siemens S7-200 HMI Siemens TD 200 Drive 220/24V/50Hz
used
Optima complete production and packaging line for ELISA test kits, comprising the Optima MEDICON ImmuCoat coating system for the manufacture of 96-well microtitre plates for ELISA kits; operating principle and process steps: 1. Feeding and preparation: Microtitre plates are automatically retrieved from destackers and transferred to the transport system. 2. Deionisation: To eliminate static charges, the plates are deionised, which is crucial for uniform coating. 3. Coding: Each plate is assigned a unique serial number. 4. Coating: The system precisely dispenses the biological components (such as antibodies or proteins) into the wells of the 96-well plate (dispensing volume 0–500 µl per well, dispensing rate 0–30,000 µl/s per well), followed by automatic level verification (Level Verification Ultrasonic V2 Y with 8-channel ultrasonic sensor). 5. 2 (two) long-term incubators with a total ca ...
used
Filling and Sealing Machine for Vials & Bottles Manufacturer: Bosch Type: VSR F01 Year of Make: 1988 Machine for filling, pressing in dropper inserts and capping with screw caps of vials and bottles (stable) Capacity max. 80 objects/min 6 filling stations with 6 rotary vane pumps for filling range 20-100 ml, other filling areas possible by purchasing new pumps 1 new replacement pump for filling range 20-100 ml Drip protection by suction Bottle feeding through infeed turntable Bottle drain through drain turntable Pressing station for drip insert Ø 12.2 x 19 mm with sorting pot Screwing station with pre-screwing and post-screwing for screw cap Ø 20.5 x 32 mm with sorting pot Vacuum pump Available bottle formats (all information without guarantee, no guarantee of completeness): Ø 24.2 x 63.3 mm (10 ml), Ø 29 x 74.2 mm (20 ml), Ø 32.2 x 83.8 mm (30 ml), Ø 35.4 x 71.7 mm ...
used
Liquid filling and capping machine for vials and bottles Manufacturer: Bausch & Ströbel Type: KSF 1020 Year of Make: 1998 Stainless steel version, equipped for filling and capping vials/bottles 2 filling points for stable bottles, object Ø for round objects 16-100 mm, for flat objects 16 x 16 - 100 x 100 mm, H 35-310 mm, depending on the format set Capacity max. 3,000 objects/h depending on the product Filling range depending on the pumps 0.3-540 ml/bottle, with 2 successively installed stainless steel rotary lobe pumps per pump 8 - 50 ml Single filling (max. 50 ml) and stepped filling (max. 100 ml) possible with existing pumps Drip protection 1 transfer station for screw caps Ø 22.0 x 20.5 mm with screwing head and vibrating pot Format sets for bottle Ø 24.2 x H 63.7 mm, Ø 28.6 x H 71.5 mm, Ø 37.7 x H 92 mm 2 sets of filling needles, 2 pieces each, different diameter ...
used
Professional dosing and filling system with Soehnle scales & 3010 control system For sale is a high-quality, compact stainless steel filling system/dosing system for precise filling and weighing of bulk materials. The system is characterized by its robust stainless steel construction, intuitive operation and high flexibility. - Powerful weighing system (up to 15 kg per dosage): The built-in weighing element is specially designed for containers and portion sizes of up to 15 kg. - Soehnle Professional 3010 industrial controller: High-quality, freely programmable terminal. The terminal itself is industrially designed for measuring ranges of up to 120,000 kg and offers maximum accuracy, flexible dosing settings and signal processing at industrial level. - Integrated sieve function: The dosing / conveying channel is equipped with a perforated plate. This means that fines or ove ...
used
Optima Limoline filling and capping machine for plastic bottles for test kits for the diagnostic sector with screw caps including Franz Ziel laminar flow hood and downstream labelling, possible object diameter for round containers from 30 to 95 mm, square containers 30 to 90 mm, possible container height from 35 to 175 mm, possible screw caps up to a maximum diameter of 50 mm, bottle holder with sorting disc with a diameter of 1250 mm, Vacuum conveyor belt with a length of 1800 mm, ionization, tare scale, 2 filling stations for microdosing by means of a peristaltic pump (dosing range per peristaltic pump 1.0 to 125 ml., filling accuracy +/-1% at 1.0 ml.), gross weigher, screwing station including closure feeder, screwing station, outlet with bad ejector, good discharge directly into downstream BBK labeling system for all-round labeling of cylindrical objects with self-adhesive labels wi ...