used KALLFASS for sale

Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!

Manufacturer: KALLFASS Verpackungsmaschinen Year of Make: 2009 Fully automatic bundle packing machine: Type: Super Wrap 650 de Luxe In-Line Output: up to 28 units/min Film width: 650 mm Max. product height: 100–400 mm PLC: Siemens S7 Shrink tunnel: Type: Standard 650 NT Tunnel width: 650 mm Tunnel height: 200 mm Conveying speed: 6–22 m/min Condition: good, fully functional

Packaging machine Kallfass Universa 400 ECO; cleaned and tested; Welding width 450mm; Passage height 200mm; Max. Film width 600mm; Min. Product length 80mm; Foil perforating unit; Stepless speed control of the belts; permanently heated welding punch; Counter 418,000. Packaging machine Kallfass Universa 400 ECO; cleaned and checked; sealing width 450mm; hight 200mm; max.foil width 600mm; min.product lenght 80mm; foil perforating tool; dajustable in speed of the trnasport belts; permanently heated seal bar; counter 418,000.

Finger conveyor belt Kallfass MGZ 400; cleaned and tested; Length 2000mm; Width 400mm; suitable as a single belt or for connection to Kallfass machines; Inlet sensor. Nipper feeder Kallfass MGZ 400; cleaned and checked; lenght 2000mm; width 400mm; used for stand alone or to connect with Kallfass machines; Infeed Sensor.

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

Used KALLFASS film packaging machine Universa 400 EC and shrink tunnel Compact 450 SO - Film packaging machine KALLFASS, type: Universa 400 EC - KALLFASS shrink tunnel, type: Compact 450 SO - Incl. labeller BLUHM Conveyor belts are also available. The machines have been regularly serviced and are in good condition. Ready to use. More information on request.

Kallfass Universa 500 packaging machine; cleaned and tested; low meter reading 260,000 pcs.; Welding width 500mm; max. passage height special height 250mm; Max. Film width 600mm; understamp roll for PP films; automatic length compensation for small products; Film defect control; Film perforating device; Tunnel Compact 450 SO; Passage height 400mm; Passage width 450mm; Length hood 1100mm; Plastic link tape; Automatic cooling; Conveyor belt 2000x400mm with side guide; Roller conveyor 2000x400mm; Side sealing machine Kallfass Universa 500; cleaned and checked; low conter only 260,000 pic.; sealing width 500mm; with option max.sealing hight 250mm; max.foil width 600mm; sealing bar with roll for PP foils; automatic lenght correction for small products; perforating unit for the foil; tunnel Compact 450 SO; hight 400mm; width 450mm; Length of Hood 1100mm; Plasctic Band; Cooling Down System;  ...

Angle welder Kallfass KC 5040/450; cleaned and tested; Frame size 500x400mm; Packaged goods height max.150-200mm; Tunnel passage width 450mm; double foil holder; 4 foil needle rollers; Air table; Automatic cooling. L-sealer Kallfass KC 5040/450; cleaned and checked; frame size 500x400mm; max package hight 150-200mm; width of tunnel 450mm; double foil holder; four foil perforate units; air table; Cooling Down System.

Conveyor belt Kallfass 1850x400mm; cleaned and tested; suitable for connection to Kallfass packaging machines; height-adjustable. Delivery belt Kallfass 1850x400mm; cleaned and checked; used for Kallfass packaging machines; adjustable in hight.

Kallfass banding machine with shrink tunnel particularly suitable for long parts (wood, parquet, etc.) Trays or newspapers in a stack. Built in 1999 Punch width 950mm Max. film width 820mm Film (flat shrink film): up to 120 μm Film roll outer diameter: max. 400 mm Film roll width: top 650 mm, bottom 620 mm Passage width: 950 mm Passage height, adjustable: 400 mm In-line conveyor belt: length 2000 mm, Goods conveyor belt in the outfeed: length 2000 mm Welding system: in profile form, permanently heated, temperature thermostatically controlled, Specially coated, maintenance-free, completely odourless: Pneumatically operated welding punch with safety brake cylinders: Film tear and separation control: Foil pre-dispensing at the bottom for extremely light products Foil rolls at the top and bottom for laying with motorised drive Welding punch protection to protect the produ ...

Kallfass Universa 400 with shrink tunnel and gripper section Kallfass Universa 400 NT built in 2003 The system is immediately available. The price of the complete system includes the Universa 400. The machine is technically overhauled and is in very good condition. Technical data: - Length of transverse welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Automatic length compensation to reduce the punch gap - Welding stamp monitoring - Side welding monitoring - Foil retaining plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable sealing strip - Side weld wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Kallfass Standard shrink tunnel - Gripper section with inline belt - Curved band can be optional ...

Kallfass Super Wrap 650 dlil; Condition serviced and checked; Passage width max.650mm; Passage height 100-400mm; Film thickness max.120m; pneumatic hold-down; Speed up to 28 products/min.; Meter reading 521000; Kallfass Universal 650 HV shrink tunnel, built in 2004; Inlet width 650mm; Passage height max.400mm; Length of tunnel hood 2200mm; Automatic cooling; foil blowing function; cooling fan. Kallfass Super Wrap 650 dlil; condition checked and tested; width 650mm; Hight 100-400mm; Max.Foil Thikness 120m; Pneumatic Holding Dowm Device; speed up to 28 pic/min.; counter only 521000; tunnel Kallfass Universal 650 HV year 2004; working width 650mm; working hight max.400mm; Length of tunnel hood 2200mm; Cooling Down System; down air for the foils; Cooling unit.

Kallfass film packaging machine with shrink tunnel A small and mobile film packaging machine, ideal for shrinking and shrinking smaller products in shrink film Technical details Manufacturer: Kallfass Type: MC 3540/400pcs Operating voltage: 380 V Control voltage: 220 V Connected load: 6 kW Welding frame: 350 x 400 mm Tunnel: W 400 x H 300 mm Product width: 400 mm Product height: 150 mm Working height: 750 - 950 mm Cooling station: 300 mm Year of Make: 1991 Dimensions: (LxHxW) 2170 x 1060 x 1000 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Kallfass tilthoist with transport belt

KALLFASS outfeed and stacking line FS, Manufacture year 2012, - Roller conveyor with cross transport, - Adjustable stop, - Alignment conveyor, - Cross chain conveyor with layer formation, - Stacking system with stick cassettes, - Lifting table with chain conveyor, - Chain conveyor for wood packages, The line is in excellent condition

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 Universal Year 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400 Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vollautomatische Einschweißmaschiene mit Einschweißtunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 N Year 2000 - Serial-No. S 04.00.9 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test