We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 308)
used
used screening machine, function-tested, immediately available
used
REFAKT Dryer/Centrifuge/Dry Cleaner Previously used for centrifugal drying of plastic waste. Throughput capacity 300 to 1000 kg/h, depending on the type of plastic and wall thickness. Drive power 30 kw
used
Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
used
Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30
used
The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput is between 500 kg – 1000 kg/h. The facility consists of: • Feed belt • Load-dependent control for the feed belt • Metal detection coil • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Ce9vqix • Plastcompactor unit HV-70, which consists of storage silo feed auger, plastcompactor, central blower and cooling circuit • HERBOLD recutting mill type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Undersize recirculation into the compactor silo • Material conveying type MFT with big bag station and automatic diverter to the on-site silo • Automatic exhaust air filter • Electrical circuit •Compressor.
used
Plastic compactor Main drive 132 kW Complete system with recutting mill, fine material separation and recirculation, electrical control
used
Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use
used
Conveyor belt / belt conveyor Belt width: approx. 1,400 mm Axle distance: approx. 8,000 mm Drive: 2.2 kW
used
Tangential Chamber volume 70 l, hydraulic drop door AC motor 320 kW / 380V / 50 Hz, 1483 RPM Year 1987 Previously used for PVC.
used
vertical smoothing unit, 900 mm 3 rollers, D = 355 mm 40 m/min pneumatic delivery of the rollers with cooling rollers, trimming station, extractor and chassis
used
complete package with perforated disc, siebronde, nozzle plate we also supply new nozzle plates according to your requirements Monofilament systems on request and specification
used
Reference ID: PP-59127 Category: Bag Machines Manufacturer: HUDSON-SHARP Model: WICKETER 175W-15 Year Built: 2009 Color: - Impression: - Working Hours: - Speed: 325 cycles/min Max.Size: Bag width (draw length): 380 mm; bag depth including lip: 711 mm Min.Size: Bag depth including lip: 152 mm Condition: Good Location: Europe Availability: Immediately Machine Description HUDSON-SHARP WICKETER 175W-15 Year: 2009 Reference: PP-59127 Condition: Good Location: Europe Availability: Immediately Machine in operation Maximum draw length (bag width): 380 mm (15 inches) Bag depth including lip: 152–711 mm (6–28 inches) Nominal machine width: 730 mm Maximum cycle speed: 325 cycles/min Unwinding: 76 mm (3 inch) core, motorized reel lifting, BST edge guiding, bottom folding device Perforating: pneumatic dual-hole punch Electric suction unit for punching scrap Price o ...
used
Year: 2013 technically efficient, ready to work – after full service two pneumatically tiltable beams (resistance and pressure) adjustable height: 500 mm (liftable)
used
CPE APRON PRODUCTION HYDRAULIC PRESS Contact Person: Yasmien : 011-6781 7125 : Top Quality Glove (M26A)
used
Complete crowns lining machine, Liner profile 916 Included: - Electric cabinet - 2x Magnet elevator - Silo - CVS3000 system installed - Boxes vobrator - Cooling belt
used
Formlabs Fuse 1+ 30W: SLS 3D Printer for Nylon, TPU and Polypropylene I'm selling a Formlabs Fuse 1+ 30W. It's the successor to the Fuse 1 and has a laser that is three times as powerful. This means that it prints up to twice as fast and can process more materials. As with its predecessor, there are no support structures. The powder carries the parts, so you can fill the entire build space with components. The printer fits in a normal workshop or office and doesn't need its own room. Technical data Build space: 165 × 165 × 300 mm Laser: Ytterbium fiber laser, 30 W, 1064 nm, spot size 200 μm Layer thickness: 110 μm Materials: Nylon 12, Nylon 12 White, Nylon 12 GF, Nylon 11, Nylon 11 CF, TPU 90A, Polypropylene Nitrogen connector (optional), which allows nylon 11 and polypropylene to be printed under inert gas Software: PreForm (free), files as STL or OBJ Connection via WLAN ...
used
Formlabs Fuse 1: Compact SLS 3D Printer for Nylon Components I'm selling a Formlabs Fuse 1. It's one of the few SLS printers that fits into a normal office or workshop. It doesn't need its own room, nitrogen or extraction. A 10 W fiber laser sinters nylon powder layer by layer. Support structures are eliminated, so you can fill the build space tightly with parts and print many components in one pass. Technical data Build space: 165 × 165 × 300 mm Laser: Ytterbium fiber laser, 10 W, 1064 nm, spot size 200 μm Layer thickness: 110 μm Materials: Nylon 12, Nylon 11, Nylon 12 GF (glass fibre reinforced) Up to 70% waste powder can be reused per print (nylon 12) Software: PreForm (free), files as STL or OBJ Connection via WLAN or Ethernet, operation via touchscreen Dimensions: approx. 64 × 69 × 107 cm (without base) Weight: approx. 114 kg Application The Fuse 1 is intende ...
used
LIKE NEW (hardly used) - XYZprinting MfgPro230 xS: SLS 3D printer for nylon and TPU incl. sift station I'm selling an industrial SLS printer from XYZprinting. The MfgPro230 xS uses a 30W CO2 laser to sinter plastic powder layer by layer to produce finished parts. It doesn't need support structures. The loose powder carries the parts, so several components can be stacked on top of each other in the build space (nesting) and produced in a single print job. Technical data Build space: 230 × 230 × 230 mm Laser: CO2, 30 W, spot size 80 μm Layer thickness: 0.08 to 0.2 mm Mounting speed: around 20 mm per hour Materials: sPro12W (PA12) and sProTPU, open material system Closed build chamber with nitrogen atmosphere and heated print bed Removable build module: While one print is cooling down and being unpacked, the next can already be running Operation via touchscreen, software XY ...
used
3E JG 300 plastic mill / squeezer – output approx. 300 kg/h (2013) POL-SERVICE Majcher – manufacturer and supplier of plastic processing machines with over 30 years of experience. The machine is used, in very good technical condition, with low operating time, fully CE compliant and available for inspection in Poland. Technical data: Manufacturer: 3E -Model: JG 300 -Year of manufacture: 2013 -Throughput: approx. 300 kg/h (depending on material and process settings) -Technical condition: very good, little used machine -CE conformity: yes Screw / squeezer section: -Main screw motor: 18.5 kW -Screw diameter: Ø 280 mm -Screw speed: 1450 rpm -Hydraulic power pack with pump: 1.5 kW Shredder section: -Shredder rotor speed: 83 rpm -Shredder main motor: 15 kW Two functions in one machine – squeezing (dewatering / densifying) and size reduction of the material ...