used BERSTORFF for sale

available Berstorff Bias Cutter Angle 0-50 degrees with manual splice 90 degree with automatic splice Ce certified Description attached!

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

120 mm cold feed pen convert-extruder, GE 120 SC, make Berstorff, output capacity up to 1,000 kg /h as a power extruder with strip spray head, complete rebuild mechanically and electrically in 2024

Manufacturer: Berstorff Type: 1200 x Ø 450 mm Year of manufacture: 1961 / revised by DEGUMA Engine No.: 60-20409 Rolls: 1200 mm roller length 450 mm roller diameter Cylindrical rollers, smooth roller surface Roller cooling: Central bottle neck bore, with NEW ROTOFLUX rotary unions Speed: Fixed speed, non-variable Rear roller: 18.2 rpm = 25.7 m/min Front roller: 16 rpm = 22.6 m/min Friction: 1 : 1.14 – new coupled wheels Roller bearings: plain bearings, very good condition, bearing journals reground during last revision Lubrication: Automatic oil circulation lubrication with electric pump Gap adjustment: Manual by ratchet; Display via scale on the stand Roller breakage protection: fracture plates Guide jaws: 2-part, moving material wiper jaws made of steel with center sword; Firmly attached to the bearing housings, cannot be swivelled Material pan: Sliding sheet steel ...

Year: 1992 / 2024 currently under refurbishment by DEGUMA, new drive and electric control system Machine No.: 90-1-E0.6588 Screw:  90 mm x 16 D - With vacuum zone - Screw is in good condition - Actual diameter according to DEGUMA measurement protocol Ø 89.74 mm – very good condition, no refurbishing needed Screw tempering: Screw is drilled for tempering via a NEW Rotoflux rotary joint Screw speed: Approx. 55 rpm max. – infinitely variable Extrusion height: 1000 mm Barrel: Bushes in feed zone, mixing zone and output zone in very good condition - Actual diameter according to DEGUMA measurement protocol Ø 90.04 – 90.20 mm – no refurbishing needed - Feeding opening 130 x 100 mm - With feeding hopper and temperable power feed roll - Refurbished feeding roll with new bearings and new rotary joint - 3 tempering zones at the barrel plus head, screw  ...

Stock blender for 1800 mm rolling mill, make Berstorff, mechanical laying via spindle drive 3.0 KW, pull roller with 5.0 KW Vario gearbox

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

Rolls diameter: 500mm. Working length 1500mm. Motor power 90kW Siemens controlled by frequency inverter Omron A1000. Main drive realized by herringbone gear wheels. Machine has most effective pneumatic disc safety brake. Motorized roll gap adjustment (Siemens motors)). Machine is after full modernization in 2017 and adapted to the minimum safety requirements. Programmable safety relay SICK Flexisoft. Limit switches Schneider, string safety switches Allen Bradley, emergency stop switches Eaton and Schneider. Operating panel Proface GP-4201TW. Autonomous lubrication station for rolls bearings lubrication. Self-supporting base plate with rubber vibrations absorbers . Technical documentation is available.