used BATTENFELD for sale

BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...

Inv. Num. : 7752 Type: BEX 1-75-30B Producer: Battenfeld Created: 2007 Parameters: Screw diameter: 75 mm Output capacity: 400 kg/h Weight: 3400 kg Equipment: Tow Strap

Battenfeld TM 300/2250 Clamping force: 300t Year of Make: 2014 Injection weight in hp: 980g Injection Unit .../2250 Screw diameter: 65 mm Spec. Spray pressure: 2070 bar Injection volume: 1078 ccm Injection weight in hp: 980 g Hydr. Drive power: 63 kW Cylinder heating capacity: 26 kW L/D Screw Ratio: 22 Clamping Unit 300/... Clamping force: 300 t Size of the clamping plates: 1020 x 940 mm Clearance spar spacing: 630 x 630 mm Ejector force: 59 kN Tool installation height: 250...650 mm Opening travel: 600 mm Max. plate spacing: 1250 mm Ejector travel: 200 mm Total connected load: 2222 kW Fuel tank capacity: 550 l Electrical connection (fuse): 1111 A Weight: 11800 kg Dimensions(m) LxWxH: 7.0 x 1.8 x 2.4 m Year of Make: 2014

Battenfeld TM 300/2250 Clamping force: 300t Year of Make: 2014 Injection weight in hp: 980g Injection Unit .../2250 Screw diameter: 65 mm Spec. Spray pressure: 2070 bar Injection volume: 1078 ccm Injection weight in hp: 980 g Hydr. Drive power: 63 kW Cylinder heating capacity: 26 kW L/D Screw Ratio: 22 Clamping Unit 300/... Clamping force: 300 t Size of the clamping plates: 1020 x 940 mm Clearance spar spacing: 630 x 630 mm Ejector force: 59 kN Tool installation height: 250...650 mm Opening travel: 600 mm Max. plate spacing: 1250 mm Ejector travel: 200 mm Total connected load: 2222 kW Fuel tank capacity: 550 l Electrical connection (fuse): 1111 A Weight: 11800 kg Dimensions(m) LxWxH: 7.0 x 1.8 x 2.4 m Year of Make: 2014

Battenfeld HM 180 /525H/60V Clamping force: 180t Year of Make: 2009 Injection weight in hp: 175/20.8g Injection unit .../525/... 60 Screw diameter: 35/18 mm Spec. Spray pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in hp: 175/20.8 g L/D Screw Ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Lights spar spacing: 570 x 520 mm Tool installation height: 305 mm Ejector travel: 200 mm equipment: -Servo drive rotary table -3 x Hydraulic Core

Battenfeld HM 180 /525H/60V Clamping force: 180t Year of Make: 2009 Injection weight in hp: 175/20.8g Injection unit .../525/... 60 Screw diameter: 35/18 mm Spec. Spray pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in hp: 175/20.8 g L/D Screw Ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Lights spar spacing: 570 x 520 mm Tool installation height: 305 mm Ejector travel: 200 mm equipment: -Servo drive rotary table -3 x Hydraulic Core

Battenfeld TM 300/2250 Closing force: 300t Year of production: 2014 Injection weight: 980g Injection unit .../2250 Screw diameter: 65 mm Specific injection pressure: 2070 bar Injection volume: 1078 ccm Injection weight: 980 g Pump motor power: 63 kW Cylinder heating band power: 26 kW L/D ratio: 22 screws Tool clamping system 300/... Closing force: 300 t Tool plate dimensions: 1020 x 940 mm Clearance between columns: 630 x 630 mm Ejector force: 59 kN Tool height: 250...650 mm Opening Path: 600mm Maximum Distance of Plates: 1250mm Ejector Stroke: 200mm Electrical connection (protection): 550 l Weight: 11800 kg Dimensions (m) L x W x H: 7.0 x 1.8 x 2.4 m

Battenfeld HM 180 /525H/60V Clamping force: 180t Year of construction: 2009 Shot capacity: 175/20,8g Injection unit .../525/60 Screw diameter: 35/18 mm Injection pressure: 2743/2593 bar Injection volume: 193/22,9 ccm Shot capacity: 175/20,8 g L/D ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Distance between tie bars: 570 x 520 mm Mould height: 305 mm Ejector stroke: 200 mm Equipment: -Servo-driven rotary table -3 x hydraulic core

Battenfeld HM 500/3400 Clamping force: 500t Year of Make: 2007 Injection weight in hp: 1937g Injection Unit .../3400 Screw diameter: 85 mm Spec. Spray pressure: 1574 bar Injection weight in hp: 1937 g L/D Screw Ratio: 22 Clamping unit 500/... Clamping force: 500 t Size of the clamping plates: 1590 x 1470 mm Clearance spar spacing: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg equipment: -1 x Air Valve -2 x core pull closing side NW 6 -Interface for robots according to EUROMAP 67 -Temperature control of the feed zone, integrated -Core pulling movement and parallel ejection by means of DFEE, auxiliary pump -Equipment package wear and corrosion protection, plasticizing unit -Potential-free contact parallel to the feeder

Battenfeld HM 500/3400 Clamping force: 500t Year of construction: 2007 Shot capacity: 1937g Injection unit .../3400 Screw diameter: 85 mm Injection pressure: 1574 bar Shot capacity: 1937 g L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Plate size: 1590 x 1470 mm Distance between tie bars: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg Equipment: -1 x air valve -2 x core pull on the closing side, NW 6 -Interface for robot according to EUROMAP 67 -Integrated temperature control for the feed zone -Core pull movement and parallel ejection via DFEE auxiliary pump -Wear- and corrosion-protected plasticizing unit package -Potential-free contact parallel to the dosing unit

Battenfeld TM 300/2250 Clamping force: 300t Year of Make: 2014 Injection weight in hp: 980g Injection Unit .../2250 Screw diameter: 65 mm Spec. Spray pressure: 2070 bar Injection volume: 1078 ccm Injection weight in hp: 980 g Hydr. Drive power: 63 kW Cylinder heating capacity: 26 kW L/D Screw Ratio: 22 Clamping Unit 300/... Clamping force: 300 t Size of the clamping plates: 1020 x 940 mm Clearance spar spacing: 630 x 630 mm Ejector force: 59 kN Tool installation height: 250...650 mm Opening travel: 600 mm Max. plate spacing: 1250 mm Ejector travel: 200 mm Total connected load: 2222 kW Fuel tank capacity: 550 l Electrical connection (fuse): 1111 A Weight: 11800 kg Dimensions(m) LxWxH: 7.0 x 1.8 x 2.4 m Year of Make: 2014

Battenfeld TM 300/2250 Clamping force: 300t Year of Make: 2014 Injection weight in hp: 980g Injection Unit .../2250 Screw diameter: 65 mm Spec. Spray pressure: 2070 bar Injection volume: 1078 ccm Injection weight in hp: 980 g Hydr. Drive power: 63 kW Cylinder heating capacity: 26 kW L/D Screw Ratio: 22 Clamping Unit 300/... Clamping force: 300 t Size of the clamping plates: 1020 x 940 mm Clearance spar spacing: 630 x 630 mm Ejector force: 59 kN Tool installation height: 250...650 mm Opening travel: 600 mm Max. plate spacing: 1250 mm Ejector travel: 200 mm Total connected load: 2222 kW Fuel tank capacity: 550 l Electrical connection (fuse): 1111 A Weight: 11800 kg Dimensions(m) LxWxH: 7.0 x 1.8 x 2.4 m Year of Make: 2014

Battenfeld HM 180 /525H/60V Clamping force: 180t Year of Make: 2009 Injection weight in hp: 175/20.8g Injection unit .../525/... 60 Screw diameter: 35/18 mm Spec. Spray pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in hp: 175/20.8 g L/D Screw Ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Lights spar spacing: 570 x 520 mm Tool installation height: 305 mm Ejector travel: 200 mm equipment: -Servo drive rotary table -3 x Hydraulic Core

Battenfeld HM 500/3400 Clamping force: 500t Year of Make: 2007 Injection weight in hp: 1937g Injection Unit .../3400 Screw diameter: 85 mm Spec. Spray pressure: 1574 bar Injection weight in hp: 1937 g L/D Screw Ratio: 22 Clamping unit 500/... Clamping force: 500 t Size of the clamping plates: 1590 x 1470 mm Clearance spar spacing: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg equipment: -1 x Air Valve -2 x core pull closing side NW 6 -Interface for robots according to EUROMAP 67 -Temperature control of the feed zone, integrated -Core pulling movement and parallel ejection by means of DFEE, auxiliary pump -Equipment package wear and corrosion protection, plasticizing unit -Potential-free contact parallel to the feeder

Spare parts for injection molding machines Spare parts electric Battenfeld Battenfeld Bachmann MF 600/1 B Nr. B 3736/01 Battenfeld Bachmann CV-A500 No. 2532/00 Battenfeld Bachmann MEM 501/S No. B 8776/00 Battenfeld Bachmann KOP 500U/S Nr. B 6786/00 Battenfeld Bachmann MEM 501 No. B 4018/00 Battenfeld Bachmann STU 500 E No. B 6448/00 Battenfeld Bachmann VID 500/S No. B 6802/00 Battenfeld Bachmann STU 500 No. B 4749/00 Battenfeld Bachmann CVA 500 Nr. B 2532/00 Battenfeld Bachmann AIO 500 No. B 2585/00 Battenfeld Bachmann AIO 500 No. 2585/00 Battenfeld Bachmann KOP 500 U/S No. B 6786/00 Battenfeld Bachmann KOP 500 U No. 2563/00 Battenfeld Bachmann CC 11/4 Nr. B 6047/00 Battenfeld Bachmann CE 32/1S No. 6144/00 Battenfeld Bachmann CE 32/1 No. B 2600/01 Battenfeld Bachmann CE 32/1S No. B 6144/00 Battenfeld Bachmann CE 32-100B Battenfeld Bachmann VID 500 Nr. B 2565/00  ...

The price is a guide price, we will consider a reasonable counteroffer. We want to sell the machine as soon as possible. Everything works well, the repeatability is also good. It has no hidden flaws. The seal of the locking cylinder must be replaced. All documentation, programs and software licenses are available. The machine can be operated in 23 languages on the touchscreen. The operation can be seen in the uploaded video or in person at our factory. - Immediately available in our warehouse in Budapest, loaded onto the customer's truck free of charge or delivered to the customer's home for a refund. - Function tested (guaranteed function until the first use) - The machine can also be checked under power Information about the machines we offer and our company: - We only sell machines that we own and can be purchased from our warehouse in Budapest. - We check and tes ...

Battenfeld HM 180/1000 Clamping force: 180t Year of Make: 2009 Injection weight in hp: 540g Injection Unit .../1000 Screw diameter: 55 mm Spec. Spray pressure: 1666 bar Spray volume: 594 cc Injection weight in hp: 540 g L/D Screw Ratio: 22 Clamping unit 180/... Clamping force: 180 t Size of the clamping plates: 810 x 805 mm Lights spar spacing: 570 x 520 mm Ejector force: 41.2 kN Tool installation height: 325 mm Opening travel: 650 mm Max. plate spacing: 975 mm Ejector travel: 200 mm Fuel tank capacity: 400 l Weight: 8000 kg Dimensions(m) LxWxH :5.2 x 1.6 x 2.2 m Control type: Unilog B6 equipment: -2 x hydraulic core -1 x Pneumatic Valve -EUROMAP 67 -Rotameter 8-sectional

Battenfeld HM 180 /525H/60V Clamping force: 180t Year of Make: 2009 Injection weight in hp: 175/20.8g Injection unit .../525/... 60 Screw diameter: 35/18 mm Spec. Spray pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in hp: 175/20.8 g L/D Screw Ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Lights spar spacing: 570 x 520 mm Tool installation height: 305 mm Ejector travel: 200 mm equipment: -Servo drive rotary table -3 x Hydraulic Core

Battenfeld HM 500/3400 Clamping force: 500t Year of Make: 2007 Injection weight in hp: 1937g Injection Unit .../3400 Screw diameter: 85 mm Spec. Spray pressure: 1574 bar Injection weight in hp: 1937 g L/D Screw Ratio: 22 Clamping unit 500/... Clamping force: 500 t Size of the clamping plates: 1590 x 1470 mm Clearance spar spacing: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg equipment: -1 x Air Valve -2 x core pull closing side NW 6 -Interface for robots according to EUROMAP 67 -Temperature control of the feed zone, integrated -Core pulling movement and parallel ejection by means of DFEE, auxiliary pump -Equipment package wear and corrosion protection, plasticizing unit -Potential-free contact parallel to the feeder

Battenfeld HM 180/1000 Clamping force: 180t Year of Make: 2009 Injection weight in hp: 540g Injection Unit .../1000 Screw diameter: 55 mm Spec. Spray pressure: 1666 bar Spray volume: 594 cc Injection weight in hp: 540 g L/D Screw Ratio: 22 Clamping unit 180/... Clamping force: 180 t Size of the clamping plates: 810 x 805 mm Lights spar spacing: 570 x 520 mm Ejector force: 41.2 kN Tool installation height: 325 mm Opening travel: 650 mm Max. plate spacing: 975 mm Ejector travel: 200 mm Fuel tank capacity: 400 l Weight: 8000 kg Dimensions(m) LxWxH :5.2 x 1.6 x 2.2 m Control type: Unilog B6 equipment: -2 x hydraulic core -1 x Pneumatic Valve -EUROMAP 67 -Rotameter 8-sectional

Battenfeld HM 180 /525H/60V Clamping force: 180t Year of Make: 2009 Injection weight in hp: 175/20.8g Injection unit .../525/... 60 Screw diameter: 35/18 mm Spec. Spray pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in hp: 175/20.8 g L/D Screw Ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Lights spar spacing: 570 x 520 mm Tool installation height: 305 mm Ejector travel: 200 mm equipment: -Servo drive rotary table -3 x Hydraulic Core

Battenfeld HM 500/3400 Clamping force: 500t Year of Make: 2007 Injection weight in hp: 1937g Injection Unit .../3400 Screw diameter: 85 mm Spec. Spray pressure: 1574 bar Injection weight in hp: 1937 g L/D Screw Ratio: 22 Clamping unit 500/... Clamping force: 500 t Size of the clamping plates: 1590 x 1470 mm Clearance spar spacing: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg equipment: -1 x Air Valve -2 x core pull closing side NW 6 -Interface for robots according to EUROMAP 67 -Temperature control of the feed zone, integrated -Core pulling movement and parallel ejection by means of DFEE, auxiliary pump -Equipment package wear and corrosion protection, plasticizing unit -Potential-free contact parallel to the feeder

Battenfeld HM 180/1000 Clamping force: 180t Year of Make: 2009 Injection weight in hp: 540g Injection Unit .../1000 Screw diameter: 55 mm Spec. Spray pressure: 1666 bar Spray volume: 594 cc Injection weight in hp: 540 g L/D Screw Ratio: 22 Clamping unit 180/... Clamping force: 180 t Size of the clamping plates: 810 x 805 mm Lights spar spacing: 570 x 520 mm Ejector force: 41.2 kN Tool installation height: 325 mm Opening travel: 650 mm Max. plate spacing: 975 mm Ejector travel: 200 mm Fuel tank capacity: 400 l Weight: 8000 kg Dimensions(m) LxWxH :5.2 x 1.6 x 2.2 m Control type: Unilog B6 equipment: -2 x hydraulic core -1 x Pneumatic Valve -EUROMAP 67 -Rotameter 8-sectional

Battenfeld HM 180 /525H/60V Clamping force: 180t Year of Make: 2009 Injection weight in hp: 175/20.8g Injection unit .../525/... 60 Screw diameter: 35/18 mm Spec. Spray pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in hp: 175/20.8 g L/D Screw Ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Lights spar spacing: 570 x 520 mm Tool installation height: 305 mm Ejector travel: 200 mm equipment: -Servo drive rotary table -3 x Hydraulic Core

Battenfeld HM 500/3400 Clamping force: 500t Year of Make: 2007 Injection weight in hp: 1937g Injection Unit .../3400 Screw diameter: 85 mm Spec. Spray pressure: 1574 bar Injection weight in hp: 1937 g L/D Screw Ratio: 22 Clamping unit 500/... Clamping force: 500 t Size of the clamping plates: 1590 x 1470 mm Clearance spar spacing: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg equipment: -1 x Air Valve -2 x core pull closing side NW 6 -Interface for robots according to EUROMAP 67 -Temperature control of the feed zone, integrated -Core pulling movement and parallel ejection by means of DFEE, auxiliary pump -Equipment package wear and corrosion protection, plasticizing unit -Potential-free contact parallel to the feeder

Manufacturer: Battenfeld Type: Microsystem 50 Year of production: 2000 Control: Unilog B4 Closure Type: Knee Closing force: 50 kN Maximum mold dimensions: 196 mm x 156 mm Plate Size: 196mm x 364mm Tool height: min 100 Opening Distance: 200mm Maximum distance between plates: 300 mm Screw: 14mm Stroke Volume: 1.1 ccm / 1 gram PS Injection pressure: 2500 bar General Total power: 2 kW Dimensions: 1.9 m x 0.8 m x 2.4 m weight: 1100 kg On-screen text: German Accessories: • Rotary table, • Robot integrated with the machine, • Fully electric injection molding machine, • Quality monitoring module, • Cleanroom module, • In-mold pressure control • Quiet operation of the machine • Additional 14 mm auger

Good morning Injection machine for sale: Battenfeld BA 1000/200 CDC Year of production: 2002 Operating Hours: 86,586 1. Capping unit: Clamping force [kN]: 1,000 Dimensions of the fixing plates (hxv) [mm]: 640 x 590 Clearance between columns (hxv) [mm]: 370 x 420 Min./ max. mould height [mm]: min 250 Maximum opening width [mm]: 725 2. Injection Unit: Screw diameter [mm]: 40 Injection volume [cm³]: 175.9 Injection weight [g]: 160 Injection pressure [bar]: 1,137 3. Electrical-hydraulic equipment: Pump motor rated power [kW]: 11.2 Heater power [kW]: 7.88 4. Dimensions and weight: Net weight with control cabinet [t]: 4.3 Dimensions (L x W x H) [m]: 4.4 x 1.8 x 1.8 Why choose our machines? - Full technical efficiency: Each machine is thoroughly checked and serviced by our experienced mechanics. - Competitive prices: We offer attractive financial conditi ...

Good morning We offer a wide range of high-quality injection molding machines that are ideal for a variety of applications in plastics processing. All our machines are in excellent working order and are ready for immediate use. Battenfeld TM4500/2800 for sale 3 pcs. Basic information: Brand: Battenfeld Machine Type: TM4500/2800 Year of production: 2001 Operating hours: 78072 1. Capping unit: Clamping force: 4500 kN Dimensions of the fixing plates (H x W): 1155 x 1195 mm Column clearance (H x W): 800 x 800 mm Minimum / Maximum mould height: min 425 / max 770 mm Maximum opening width: 1530 mm 2. Injection Unit: Screw diameter: 75 mm Injection volume: 1657 cm³ Injection weight: 1506 g Injection pressure: 1739 bar The offer is only valid for the machine (without the reference equipment) Why choose our machines? - Full technical efficiency: Each machine is t ...

Spare parts for Battenfeld injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm

Since a new machine has arrived, the machine is in good condition for urgent sale. The machine does not come with a robot, drying unit, material suction unit and tool mounting screws. The machine is in Budapest, we will load it onto the truck with a crane. Please see our other advertisements.

Clamping force 1300 to, screw 120 mm, 4 hydraulic core pulls, 2 pneumatic core pulls, cascade control for 2 Sepro Handling closure nozzles with 20 kg handling weight Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Clamping force 450 kN, tool installation height 195 - 300 mm, tool stroke 375 mm, distance clamping plate max 550 mm, centering diameter 125 mm, clamping plate 460 x 460 mm, screw diameter 22 mm, stroke capacity 41.8 cm³, injection weight 36.00 g, specific injection pressure 2864 bar Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Clamping force 600 kN, injection weight 90g, screw diameter 30 mm, 2 core pulls, extras parting level, quality sorting flap, drive 46.8 kW Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Clamping force 450 kN, tool installation height 195 - 300 mm, tool stroke 375 mm, distance clamping plate max 550 mm, centering diameter 125 mm, clamping plate 460 x 460 mm, screw diameter 22 mm, stroke capacity 41.8 cm³, injection weight 36.00 g, specific injection pressure 2864 bar Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Ref. no.: 16369 Hersteller: BATTENFELD Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

Clamping force: 500kN, tie-bar spacing: 304mm/304mm, platen size X/Y/: 480mm/480mm, min. mold height: 150mm, max. opening stroke: 525mm, opening stroke: 375mm. Screw diameter: 35mm, injection volume: 134 cm³, injection pressure: 1485bar. Dimensions X/Y/Z: approx. 3300mm/1300mm/1900mm, weight: approx. 2500kg. On-site inspection is possible.

Clamping force: 1000kN, tie bar distance: 420mm/420mm, min. installation height: 250mm, max. opening stroke: 750mm, screw diameter: 40mm, injection volume: 226.5cm³, injection weight PE/PS: 206g/161g, injection pressure: 2164bar. Dimensions X/Y/Z: approx. 4500mm/1500mm/2000mm, weight: approx. 4700kg, control: Unilog 4000B, operating hours: 99295h. Including Euro package, ejector plate safety device, AK+ screw cylinder and storage cassette with 21 slots. Documentation available. On-site inspection is possible.

BATTENFELD plastic injection machine with a clamping force of 500t. Dimensions of plates and columns Min. mould dim. / Max. Mould dim. 400 mm / 720 mm Storke of Opening 860 MOTOR KW / TOTAL KW 55 kw / 75 kw 2007 Weight KG 2195 Dimensions 900 900 mm Find more here - / Contact us at -

The Battenfeld PLUS 350V/75 is an injection molding machine. These types of machines are used to produce plastic parts by injecting molten plastic material into a mold, where it cools and solidifies into the desired shape. Weight (Gew.): 1200 kg Motor Nominal Current (Motorennennstrom): 1 A Control Voltage (Steuerspannung): 24 V DC Find more here - / Contact us at -

Screw diameter 30 mm Foundation plan / installation plan (see machine layout above in the appendix), an extra foundation for the plant was not poured here Operating hours 12455h on 28.01.2021 Automatic cycle counter 743558 processed material PBT-GF 30 Ultradur B4300 G6 Q16 black Find more here - /

2001 Battenfeld TM 2700 / 1330 Battenfeld TM 2700 / 1330 Control: UNILOG B4 Year 2001 64256 operating hours Screw diameter 55mm Weight of injection molding machine 10.800kg according to manufacturer Optionally with HG Wittmann W818 The injection molding machine is optionally offered with robot Wittmann W 818-9713 incl. conveyor belt and protective housing Its optional to add robot Wittmann W 818-9713 incl. console ; conveyor belt and protective housing Robot data Wittmann W 18 - 9713 Year : 2018 Payload: 6 kg X = 620mm Y = 1200mm Z = 2000mm Incl. electric C axis and Busch vacuum generator Conveyor belt data Manufacturer Wittmann Year 2018 Belt width 800mm Box width 910mm Length 1900mm Incl. mobile underframe Find more here - / Contact us at -

BATTENFELD EXTRUSION LINE FOR PVC, EVA,.., including:, PAPENMEIER MIXER, type TSEH 200/KMSU 400 L, construction year 1991, Electrical power heating 30/35 kw - Cold 6,0/7,5 kw, including supporting structure, Total dimensions LWH : 2.4002.6502.550 mm., Weight : about 3.000 kg., BATTENFELD EXTRUDER, metal detector, feeding unit, barrel with screw 150 mm., 7 heating areas, 5 cooling fans, Assea 110 kw Drive, vacuum degassing pump, screenchanger 2x 90 mm.Ø, heating 4,0 kw, Gneuss temperature probes, hydraulic power station 2,3 kw, air pelletizer, variable speed, self adjusting knives, 1,5 kw drive, adjustable pressure, extra (Bausano cutting system with inverter), pellets cooling unit, vibrating screen with one air turbine on each side, Constructed in 1989, Documents available, offered AS IS WHERE IS or CHECKED., CUTTING: AIR

This Battenfeld BA 60 film extruder was manufactured in 1998. A reliable choice for your film extrusion needs, it represents a solid addition to any production line. Contact us for more information.

This Battenfeld BA 600/200 CDC was manufactured in 1996. A hydraulic injection moulding machine with a clamping force of 60 tons and a screw diameter of 30 mm. It has a working capacity of 200 cm3 and operates at a hydraulic pressure of 210 bar. Consider the opportunity to buy this Battenfeld BA 600/200 CDC hydraulic injection moulding machine. Contact us for more information.

This Battenfeld TM 2700/2800 was manufactured in 2003. A hydraulic injection moulding machine with a clamping force of 270 tons and a screw diameter of 75 mm. It has a working capacity of 2,800 cm3 and operates at a hydraulic pressure of 210 bar. Consider the opportunity to buy this Battenfeld TM 2700/2800 hydraulic injection moulding machine. Contact us for more information about this machine.

This Battenfeld TM 270 / 2800 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 620 x 620 mm and an opening stroke of 600 mm. Equipped with 2 core valves, 4 air valves, and an EU 12 interface for robot connection. A solid choice for enhancing production capabilities. Contact us for more information.

This Battenfeld VM 150/750V R1520 UNIGLOG B6S was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Battenfeld VM 150/750V R1520 UNIGLOG B6S. Contact us for more information.

This Battenfeld HM 8000/4500 + 4500 BMB 4 was manufactured in 2006. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing tasks. Consider the opportunity to buy this Battenfeld HM 8000/4500 + 4500 BMB 4 hydraulic injection moulding machine. Contact us for more information.

This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details.