used IMA for sale

Used bulk cartoner made by IMA model CP6. New 2013. Upgraded to the requirements of serialization of pharmaceutical products.

IMA CP28BA Min./Max. box size: 220 x 120 x 120 mm / 600 x 400 x 350 mm Overall dimensions (W x D x H): 5000 x 1850 x 1900 mm Speed: 8 cartons/minute Weight: 1500 kg Compressed air: 6 bar Installed power: 2.8 kW Complies with CE standards

IMA C 80- A81 Blister and cartoning machine More information on request.

IMA BLISTERING MACHINE, MODEL C102 Year of construction: 2018 Machine for tray production with automatic product feeding, characterized by a balcony style structure which also allows a customization of the feeding area depending on the product to pack. the linear work flow of the material allows an easy forming material introduction each change-over despite its simplicity, it’s an ideal tray forming machine with attractive speed flexible for the packaging of syringes, ampoules, vials, small cosmetic products, solid forms etc. extremely simple to use for semi-skilled operators too PRODUCTION Cycle speed 15-40 cycles/minute Tray dimensions 30-138 mm (W) x 52-250 mm (L) x 3-25 mm (D) Vial blisters production 3 Blisters/Forming Step (Ampoules): 5 x 1ml 5 x 2ml 3 x ½ml 1 x ½ml

IMA OVERWRAPPING MACHINE, MODEL BFB DIVISION 3711 Year of construction: 2016 Production reaches 110 cycles/min handling somewhat larger sized products. Changeover procedures are fast and easy, to avoid unwanted downtime. High quality individual or multiple over wrapping for regular product Complete with a device to lift the film-driving rollers during product elevation These machines enable the use of extremely thin films and avoid the film sliding around the product, thus obtaining the perfect over wrapping finish The equipment uses standard Siemens electrical components and a Siemens PLC. The steel frame is oil-tight and lubrication is by means of oil bath. TECHNICAL SPECIFICATIONS Electrical frequency: Hz 50 Operating voltage: Volt 380 Air pressure: bar 6 DIMENSIONS Net weight: Kg 1500 Length approx.: mm 6400 Width approx.: mm 1735 Height approx.: mm ...

IMA FILLING AND CLOSING MACHINE, MODEL STERIFILL SMART PWD Year of construction: 2017 IMA SMART PWD is able not only to process difficult powders accurately, but also to simultaneously dose, by vacuum-pressure, two different types of pharmaceutical products inside the same vial, with single 100% check-weighing. Speed: max. 100 pcs/min Available formats: 10R Transport system: Intermittent motion Highlights Possibility of dosing up to 2 different pharmaceutical powders in the same vial Vacuum-pressure powder filling system Advanced 100% IPC with speeds of up to 120 pcs/min Possible integration of a capping station Pick & place stoppering system Fit for isolation technology with possibility of wetting in place cRABS for powder containment Technical characteristics Standard voltage: 400 V, 50 Hz, 3ph + N + G Installed power: 19 kW

High-speed labeller for 2.25 ml Ypsomate Autoinjectors. The machine line consists of an automatic pallet management system for the autoinjectors packed on pallets in trays: a) Integrated Full Tray De-Palletizing with a first FANUC robot, which places the trays on a conveyor belt. On the same machine, the empty pallets are palletized with empty trays by a second FANUC robot. b) Machine where via the conveyor belt, trays transported with autoinjectors arrive at the next FANUC robot. This robot will pick up the autoinjectors in the laying position from the trays and put them upright into the feeder to machine c). The emptied trays will be transported back to machine a), where they will be picked up and put onto an empty pallet. c) Fully autom. rotary labelling machine IMA, type Sensitive Roto 720. Machine with two label dispensers for faster reel change (no downtime). Outp ...

CNC machining center IMA BIMA 310V 120/600 Year of production 2004 4 Axes With veneering - Dyna Poin BIMA 410 V preparation table Specifications: Editing area - in the X-direction without gluing: 6000 mm - in the X direction with gluing: 5000 mm - in the Y direction: 1300 mm - Y-direction with main spindle + tool Ø 20 mm: 1630 mm - in the Y direction with gluing: 1450 mm

IMA COATING MACHINE, MODEL GS EVOLUTION LAB Laboratory machine and for small production batches. Thanks to its interchangeable drum it can process a wide range of capacities (from 0.5 to 30 liters). MACHINE FEATURES three interchangeable baskets automated easy scale-up MANUFACTURING CHARACTERISTICS Minimum/maximum working capacity: 0.5÷30 l Pan diameter: 820 mm (ca) Pan mouth diameter: 300 mm (ca) ENERGY CONSUMPTION Pan motor power: 0.55 KW (ca) Process air delivery: 350 m³/h (ca) Power consumption for standard equipment: 14 kW (ca)

IMA COATING MACHINE, MODEL GS EVOLUTION LAB Laboratory machine and for small production batches. Thanks to its interchangeable drum it can process a wide range of capacities (from 0.5 to 30 liters). MACHINE FEATURES three interchangeable baskets automated easy scale-up MANUFACTURING CHARACTERISTICS Minimum/maximum working capacity: 0.5÷30 l Pan diameter: 820 mm (ca) Pan mouth diameter: 300 mm (ca) ENERGY CONSUMPTION Pan motor power: 0.55 KW (ca) Process air delivery: 350 m³/h (ca) Power consumption for standard equipment: 14 kW (ca)

IMA VIALS LABELLING MACHINE, MODEL SENSITIVE 350 Year of construction: 2010 Labelling machine for vials and bottles. A simple design for effectively handling cylindrical containers. equipped with one side labelling head, for applying the label with high accuracy thanks to an appropriate spacing between the containers and an easy-to-regulate application group labelling unit is installed in the machine basement for direct access to the labelling reels supervision and monitoring of the process through a PLC with a user-friendly HMI TECHNICAL DATA Production details Bottle maximum height (mm): 220 Bottle diameter (mm): 16-78 Maximum output (pieces/minute): 350 Labels Label length (mm): 15-250 Label height (mm): 10-100 Label reel diameter (mm): 400 Label accuracy (mm): ±1 Electrical usage Standard voltage: 400 V – 50 Hz Installed power (kW):  ...

IMA OVERWRAPPING MACHINE, MODEL AC60 Year of construction: 2005 Fully automatic single overwrapper, ideal for pharmaceutical products. Equipped with a high-speed stacking unit capable of stacking up to 225 layers/min. Maximum accessibility to all components due to the balcony design, cleaning and maintenance are also facilitated. scissor knife film transport by pincers transversal edge-sealing driven movement of bottom and lateral film folders reciprocating lateral sealing plates PRODUCTION CHARACTERISTICS Box sizes Min: 50x23x60 mm Max: 220/280x100x220 mm Length film Min: 100 mm Max: 450 mm Max speed 60/80 ppm Wrapping film cellophane PVC PE PP KRAFT ELECTRICAL DATA 208 V/3 phases

Used Side loading case packer IMA CP6. Year of construction 2013 The machine has been modernized to meet the requirements of pharmaceutical product serialization

IMA OVERWRAPPING MACHINE, MODEL BFB DIVISION 3711 Year of construction: 2016 Production reaches 110 cycles/min handling somewhat larger sized products. Changeover procedures are fast and easy, to avoid unwanted downtime. High quality individual or multiple over wrapping for regular product Complete with a device to lift the film-driving rollers during product elevation These machines enable the use of extremely thin films and avoid the film sliding around the product, thus obtaining the perfect over wrapping finish The equipment uses standard Siemens electrical components and a Siemens PLC. The steel frame is oil-tight and lubrication is by means of oil bath. TECHNICAL SPECIFICATIONS Electrical frequency: Hz 50 Operating voltage: Volt 380 Air pressure: bar 6 DIMENSIONS Net weight: Kg 1500 Length approx.: mm 6400 Width approx.: mm 1735 Height approx.: mm ...

Edge banding machine Manafacture: IMA Model: Molding edge banding machine Year of construction: 1997 Hot air unit for pre-glued edge material

IMA LABELLING/TAMPER EVIDENT MACHINE, MODEL A 400 TE – NTF Year of construction: 2015 Ensures accurate and precise label application while reaching a high production speed when product protection from damage and tampering is needed. User-friendly, quick maintenance and easy to operate. PRODUCTION Maximum output: 400 cartons/minute Vignette label size (mm) Length: 15 – 60 Height: 10 – 60 Vignette reel diameter (mm) Up to 400 Tamper-evident label size (mm) Length: 15-35 Height: 15-35 Tamper-evident reel diameter (mm): Up to 400 Labelling accuracy (mm): ± 1 Carton dimensions A: 20 to 130 mm B: 12 to 100 mm C: 50 to 210 mm ELECTRICAL DETAILS Installed power (kW): 3.5 Standard voltage: 400 V – 50 Hz – 3PH + PE DIMENSIONS Size: 2345 x 2900 x 1265 mm (ca) Weight: 1,000 kg (ca)

Table dimensions X/Y: 2800mm/800mm, working height: 970mm, min. workpiece length: 150mm, double occupancy: 1000mm, single occupancy: 2800mm, workpiece thickness min./max.: 10mm/60mm, machine dimensions X/Y/Z: approx. 6500mm/3800mm/3100mm. Including a dongle for an Imawop office workstation. Documentation available. On-site inspection is possible.

An edge banding line including feeding, turning device and an automatic drilling machine is available. The longitudinal machine enables the processing of thick edges and is equipped with new units and controls. The transverse machine can only process thin edges as there is no coupling unit. The machine was operated at up to 28 cycles per minute. Control system: Imatronic 150, documentation is available. Control system: Imatronic 150, including spare parts and tools. Documentation is available.

IMA milling unit - several milling motors immediately available from stock - price on request, depending on equipment and condition

Grooving unit IMA Type: 08.183 - controllable - swivable

Glue application with gearbox Make: IMA - glue application 04.088 - gearbox 04.156

End trimming unit IMA Type: 08.41 - pneumatic swivable

Radius profile scraper IMA Type: 08.515

Radius profile scraper IMA 08.263

PU preheater IMA 2,5 kg

Stripe breaking device IMA

Milling unit IMA - heavy version - 600 mm heigh - motors as requested Price on request (depending on equipment)

Acoustic hoods für IMA edge banding machines in various versions and dimensions available from stock Modifications / new lacquering available for a surcharge.

Gluing unit IMA complete with double coil magazine, glue application device and pressure zone

Unit for precision cutting Make: IMA

Unit for grooving / precision cutting Make: IMA

Grooving unit IMA Type: 08.181 - only grooving from side

Precision cutting unit IMA Type: 08.376

Scoring saw IMA - controllable

Flat scraper IMA Type: 08.50 Price on request

various pressure zones IMA - from stock - price on request

Chamfering unit IMA Type: 08.055 - different motor powers available Price on request (depending on version)

Edge magazine IMA - 6x - 24x fold magazine - 550 or 800 mm coil diameter Several versions available from stock. Price on request.

Sanding unit IMA Type: 08.062 - oscillating

Profile sanding unit IMA Type: 08.063

Oil-bath gearbox IMA Type: 04.015

Manufacturer: IMA, Type: Quadromat 4012 F, Year: 1995, Program: yes, Min-max edge material mm: 0,5 - 8,0, Min.-max. workpiece length in mm: 250, Min-max feed m/min: 10, Premilling: yes, Min.-max. batten magazine mm: 0,5 - 8,0, Mitre stations: yes, radius milling: yes, Corner tracing type: yes, 2 Motoren: yes, Year :1995

Manufacturer: IMA, Type: Quadroform C 80/280, Year: 1995, Working range X: 2800, Working range Y-axis: 800, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 7,5, rpm 1): 1500-18000, Number of tool changers: 8, Pickup Wechlser: yes, Vertical drills-X: 5, Drill vertical Y: 9, Number of tables: 1, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 80, Saw unit: Wechlser, FREE TEXT: inkl Werkzeuge, Year :1995

Manufacturer: Ima Verleimteile, Spare part from machine: Ima AVM, Gluing part left side: 2,

Manufacturer: IMA Veleimteil, Ersatzteil aus Maschine: IMA Compact, Verleimteil linke Seite: yes, Verleimteilhöhe min-max mm: 8-50, Steckeranschluss: yes, Temperaturegelung: yes, Machine overhauled: yes, FREE TEXT: Fassungsvermögen 0,8 Liter,

Manufacturer: IMA, Type: TF1-U1, Serial number: 98280158/0336292, Power Output: 6,6 KVA,

Manufacturer: Ima Ziehklingenaggregat 3 fach Tastung, Spare part from machine: aus Novimat Maschine, for left machine side: yes, Horizontal Rollentastung : yes, Vertical roller sensing: yes, Pneumatically controlled: Motorisch,

Manufacturer: Ima Servo Kopieraggragat, Spare part from machine: IMA Novimat, for left machine side: yes, Motor : 2, kW-Leistung : 0,3, Volt/Hz : 50, Drehzahlen U/min : 24000, Horizontal Rollentastung : yes, Vertical roller sensing: yes, Pneumatically controlled: servo Ansteurung,

Manufacturer: IMA, Type: Radiusfräsen, Gear: 2 Motoren tastend oben und Seite, Power kW: 1, Volt/Hz: 133, pm: 11500, Gear: 2 Motoren tastend oben und Seite,

Manufacturer: IMA Kantenfräsen tastend von oben, V1: 133, Hz 1: 200, Power kW: 1,8, Speed rpm: 11575,