26 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Manufacturer:
(Category: 502-1892)

HSM 1
KBM 1
PAAL 14
presses / Channel baling presses
29.07.2026
approved
dealer
item-No.: 162749816

used

check
Location: Land-de

Baler Avermann, type AVOS 1810 BRK-90/100, year of construction 2018, cross tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Press force: 100 t Driving power: 2 x 45 kW Dimensions of the insertion shaft: 1,800 x 1,000 mm Throughput at 35 kg/m³: 15.0 t/h Throughput at 60 kg/m³: 20.0 t/h Throughput at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on material Binding: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (LxWxH) Machine weight: approx. 29,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visi ...

presses / Channel baling presses
30.10.2026
approved
dealer
item-No.: 162754860
New in: 2026

used

check
Location: Land-uk
Price: 35.000 GBP

• Fully automatic horizontal channel baler • Automatic wire tying system • Schneider Magelis touchscreen operator panel • Separate motor control cabinet with emergency stop, door interlocks and hours meter • Lockout station fitted for safe maintenance • Enclosed hydraulic power pack • Operational – may require some minor repairs. Sold as seen • Already removed – loading provided at our Wymeswold site, Leicestershire. Buyer arranges haulage A heavy-duty Dutch-built Bollegraaf HBC 110 channel baler, suited to high-volume baling of cardboard, paper, film and other recyclables. Bollegraaf is one of the best-known names in recycling balers, and the HBC range is built for continuous production use. The machine has been removed and is ready to load. Viewing is welcome before purchase. We run balers, granulators and shredders on our own site at Wymeswold, near ...

presses / Channel baling presses
06.10.2026
item-No.: 162741566

used

Location: Land-pl
Price: 14.000 €

Specifications Maximum pressure: 32 tons Pressing force: 4.33 kg/cm2 Number of bindings: 4 horizontal Channel cross-section: 820 x 900 x reg mm Dimensions of the tailgate: 82 x 135 cm Bale weight: bos 400 kg Weight: approx. 6.1 tons Power connection: 380 V/ 22 kW Bale tying: automatic

presses / Channel baling presses
25.02.2025
item-No.: 162728199
New in: 2017

used

Location: Land-pl

Specifications Maximum pressure: 45 tons Year of Make: 2017 Pressing force: 6.9 kg/cm² Number of bindings: 3 Channel cross-section: 900 × 720 × 600 - 1200 mm Dimensions of the tailgate: 820 × 1250 mm Bale weight: 250 - 400 kg Weight: approx. 7 t Power connection: 400 V Bale tying: automatic Theoretical throughput 174 m3/hour Theoretical throughput to density 20 kg/m - 3.48 tons/hour Theoretical flow rate to density 50 kg/m - 8.7 tons/hour If you have any questions, please call us: +48 696 072 985

presses / Channel baling presses
07.10.2026
approved
dealer
item-No.: 162753425

used

check
Location: Land-de

Baler Macpresse MAC 105, press force 70 t, year 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of Make: 2011 Hours: 23130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Filling opening: 1500 x 750 mm Bale chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Binding: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Funnel Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time.  ...

presses / Channel baling presses
02.10.2026
item-No.: 162753137
New in: 2014

used

Location: Land-pl

Technical data Maximum pressure: 75 tons Year of manufacture: 2014 Loading opening: 1816 x 1036 mm Number of bindings: 4 horizontal Channel cross-section: 1100 x 1100 mm Oil tank: 1300l Power connection: 45 kW Weight: approx. 20 tons The press is equipped with a PET bottle perforator.

presses / Channel baling presses
30.10.2026
approved
dealer
item-No.: 162754862
New in: 1999

used

check
Location: Land-uk
Price: 55.000 GBP

• 170 tonne closing power • Channel 1,150 × 1,100 mm • 2 × 55 kW pump motors (110 kW total), 415 V / 50 Hz • 3,000 litre hydraulic tank (ISO 46 oil) • Automatic wire tying • Serial no. 2399/1 • Infeed conveyor included – pit-fed steel slat conveyor with overhead feed section to the hopper • Bale discharge tray • Originally installed by RCP Recycling Systems, Telford • CE marked • Already removed and ready for loading at our Wymeswold site, Leicestershire A 1999 Macpresse MAC 111 automatic channel baler, sold with its infeed conveyor. The MAC 111 is a heavy-duty Italian-built baler for high-volume baling of cardboard (OCC), mixed paper, plastics and other recyclables, with a large 1,150 × 1,100 mm channel and twin 55 kW pump motors. The baler and conveyor have already been taken out, so there is no dismantling for the buyer to arrange. Photos were t ...

presses / Channel baling presses
06.07.2026
approved
dealer
item-No.: 162737501
New in: 1990

used

check
Location: Land-de

automatic baler Manufacturer: PAAL Type: KONTI 125 SO Year of Make: 1990 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

presses / Channel baling presses
06.10.2026
item-No.: 162741730
New in: 1999

used

Location: Land-pl

Technical data: Maximum pressure: 60 tons Year of Make: 1999 Press force: 72.7 t/cm² Number of Bindings: 4 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1400 mm Bale weight: 450-650 kg Weight: approx. 20 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance If you have any further questions about this or similar channel balers, please do not hesitate to contact us by email or phone!

presses / Channel baling presses
27.10.2026
approved
dealer
item-No.: 162754570

used

check
Location: Land-de

Channel baler Paal Konti 275 D, built in 2001 with vorbulator and chain belt conveyor Paal KEM-1500, built in 2005 Technical data: Manufacturer: Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20900 as of 10/2026 Pressing force 75 t Total connection 106 kW Filling opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveying speed: 0.29 m/s Nominal width 1500 mm Wheelbase 17500 mm Length of feed belt: approx. 10000 mm Length of climbing section: approx. 9000 mm Gooseneck: approx. 1000 mm Slope angle: 28° Materials: pa ...

presses / Channel baling presses
13.11.2026
item-No.: 162755950
New in: 1990

used

Location: Land-de
Price: 12.900 €

Channel baler PAAL KONTI 325 B Year of manufacture 1990 + 39,929 operating hours Electric drive 104 kW (2x 52 kW) Press force approx. 101 t/ 990 kN Channel cross-section 75 x 110 cm without feed belt Weight approx. 31 t Mounting of the master cylinder on the pressure plate is defective (welded) Knives and counter blades are worn out or no longer available Duct/pressure plate guide (side walls, floor and rails) is worn The table of the printing plate has already been welded several times Printing plate rollers are worn Main control block is leaking Hold-down is knocked out Status light display is faulty Net price ex site 12,900,-- € + VAT Sale from location D - BL Mecklenburg-Vorpommern Code No. Q80

presses / Channel baling presses
04.08.2026
approved
dealer
item-No.: 162745426

used

check
Location: Land-de

Baler Paal Konti 325 D/SO, built in 1999 Technical data: Manufacturer: Paal Type Paal Konti 325 D/SO Built in 1999 Hours: 50702 Press force 94 t Drive power: 2 x 45 kW Total connection 104 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex wor ...

presses / Channel baling presses
30.10.2026
item-No.: 162754867
New in: 2007

used

Location: Land-de
Price: 79.900 €

Channel baler PAAL KONTI 325 E Year of manufacture 2007 Electric drive 109 kW Press force approx. 101 t/ 990 kN Channel cross-section 75 x 110 cm Wirbulator Wire Setup Personal security system Control cabinet Weight 28 t very good condition = completely overhauled Net price ex location 79,900,-- € + VAT Sale from location D - BL Saxony Code No. Q75

presses / Channel baling presses
04.08.2026
approved
dealer
item-No.: 162747245
New in: 2013

used

check
Location: Land-de

Just Arrived Baler Paal Konti 325 G, built in 2013 Technical data: Manufacturer: Paal Type Konti 325 G Year of construction 2013 Hours: 12110 Press force 100 t Drive power 2 x 55 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Setting 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, w ...

presses / Channel baling presses
06.07.2026
approved
dealer
item-No.: 162737497
New in: 1995

used

check
Location: Land-de

used baler Herateller: PAAL Type: PACOMAT II Year of Make: 1995 Specifications: Pressing force: 27 t Drive power: 18.5 kW Total connected load: 25 kW Throughput: 115 m³/h Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm (H x W)

presses / Channel baling presses
06.11.2026
approved
dealer
item-No.: 162755364
New in: 2022

used

check
Location: Land-de

Channel baler Paal Pacomat III-50D, built in 2022, very good condition Technical data: Manufacturer: Kadant Paal Type Pacomat III-50D Year of construction 2022 Operating hours approx. 1500 Pressing force 50 t Connected load 24 kW Filling opening 1250 x 1020 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 6.4 t/h 60 kg/m³ approx. 8.6 t/h 80 kg/m³ approx. 12.7 t/h Bale weight up to 650 kg Transport dimensions approx. 8172 x 2030 x 2500 mm (LxWxH) Machine weight approx. 12000 kg Materials: paper, cardboard, foil The press is still in use until the beginning of December and can be viewed in operation The condition is very good. It was only used for paper / die-cutting residues. The complete operating instructions including electrical/hydraulic circuit diagram and CE declaration are available. The co ...

presses / Channel baling presses
06.07.2026
approved
dealer
item-No.: 162737499
New in: 1990

used

check
Location: Land-de

automatic baler Manufacturer: PAAL Type: Pacomat IS Year of Make: 1990 specifications: Pressing force: 27 t Specific pressing force: 5.51 kg/cm² Total connected load: 23 kW Rated current: 46 A Main drive power: 18.5 kW Capacity: 80 m³/h Control: Siemens S5 100 U Bale size: 700 x 700 Filling opening: 800 x 600 mm

presses / Channel baling presses
06.10.2026
item-No.: 162740952
New in: 2006

used

Location: Land-pl

Maximum pressure: 50 tons Year of Make: 2006 Pressing force: 65 tons/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1000 mm Dimensions of the tailgate: 920 x 1400 mm Bale weight: 350-500 kg Weight: approx. 13 tons Power connection: 400 V/ 22 kW Bale tying: automatic

presses / Channel baling presses
02.11.2026
approved
dealer
item-No.: 162755026
New in: 2006

used

check
Location: Land-de

Channel baler Presona LP 80 VH1 with vorbulator, built in 2006, revised Technical data: Manufacturer: Presona Sweden Type LP 80 VH1 Year of construction 2006 Press force 78 t Drive power 55 kW Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight approx. 450-600 kg Throughput at bulk density of 30 kg/cbm: 9-12 t/h 50 kg/cbm: 14-17 t/h 100 kg/cbm: 16-25 t/h MSW: 20-27 t/h 5-fold vertical bonding Weight approx. 25000 kg Note: The press was revised by us. The following work was carried out: Press cleaned and repainted Piston rod revised Steel construction on the press body New Hardox wear plates press floor Exchange of: Shaft Wire Control Chain Wire Pull Wire Pull Pins Wire guide rollers Wheels Slide rails Hydraulic hose lines Hydraulic seals Oil Temperature Sensor Photocells Filling Chute Please note: All technical data refer ...

presses / Channel baling presses
18.08.2026
approved
dealer
item-No.: 162750610

used

check
Location: Land-de

Baler Presona LP 85 VH2, built in 2018, including spare parts package Technical data: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Bonding 5-fold vertical, (3-fold horizontal) Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg Materials: paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operations. The following work was carried out by us: New wear plates in the press channel Gasket completely replaced on the master cyl ...

presses / Channel baling presses
06.02.2025
item-No.: 162721028
New in: 1995

used

Location: Land-pl

Specifications Maximum pressure: 100 tons Year of Make: 1995 Pressing force: 82 tons/m² Number of ties: 5 in vertical Channel cross-section: 1100 x 1100 mm Dimensions of the tailgate: 2050 x 1100 mm Power connection: 400 V/ 2 x 55 kW Weight: approx. 36 tons Bale tying: automatic Press capacity under operating conditions: max 1170 m³ / hour Press capacity at idle: max 720 m³ / hour Theoretical throughput: to density 30kg/m³) 22 tons/hour Theoretical throughput: to density 50kg/m³) 28 tons/hour Theoretical throughput: to density 100kg/m³) 42 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press plate stably guided on large rollers ...

presses / Channel baling presses
05.11.2026
item-No.: 162755341
New in: 2012

used

Location: Land-pl
Price: 75.000 €

Automatic channel baler / baling press Presona LP40 EH1 – 40 t, year 2012 + self-propelled stretch wrapper for pallet wrapping (robopack). POL-SERVICE Majcher – manufacturer and supplier of plastics processing machinery with over 30 years of experience. We offer an automatic horizontal channel baler Presona LP40 EH1 from 2012, designed for baling cardboard, waste paper, film, plastics, PET bottles, foams, and other recyclable waste. The machine is equipped with a pre-press and operates in a line with a belt conveyor (visible in the photos). Technical data (Presona LP40 EH1): Main cylinder pressing force: 40 t (approx. 400 kN) Pre-press force: approx. 20 t Max. oil pressure: 200 bar / 20 MPa (as per the machine nameplate) Theoretical volumetric capacity: approx. 290 m³/h Working volumetric capacity: up to approx. 140–160 m³/h (depending on material) Mass throughpu ...

presses / Channel baling presses
07.10.2026
item-No.: 162753451

used

Location: Land-pl

Technical data Maximum pressure: 60 tons Year of manufacture: 2011 Pressing force: 78 tons/m² Number of bindings: 5 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1500 x 1100 mm Bale weight: 425-575 kg Weight: approx. 21 tons Power connection: 400 V Bale tying: automatic Press capacity under operating conditions: max 370 m³ / hour Press capacity at idle: max 940 m³ / hour Theoretical throughput: to density 30kg/m³) 11 tons/hour Theoretical throughput: to density 50kg/m³) 15 tons/hour Theoretical throughput: to density 100kg/m³) 22 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press  ...

presses / Channel baling presses
24.06.2026
approved
dealer
item-No.: 162743990
New in: 2005

used

check
Location: Land-de

Hello, We hereby offer you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Hours 15606 Hours Press force main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm approx. 6.7 t/hour Machine weight press 12.5 t Note: The machine has been repaired in our workshop (main control valve on the hydraulic block replaced) and tested on the fly, in manual and automatic mode. The machine documentation is available in German. A tour of the press is possible by appointment in our workshop. We would be happy if  ...

presses / Channel baling presses
01.04.2025
item-No.: 162715801

new

Location: Land-pl
Price: 788 €

High-pressure pump for baler HSM 500.1 VL with 7.5 kW motor

presses / Channel baling presses
01.04.2025
item-No.: 162715794

new

Location: Land-pl
Price: 455 €

baler hydraulic power pump HSM V-press 1160 Plus

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996