We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
• 170 tonne closing power • Channel 1,150 × 1,100 mm • 2 × 55 kW pump motors (110 kW total), 415 V / 50 Hz • 3,000 litre hydraulic tank (ISO 46 oil) • Automatic wire tying • Serial no. 2399/1 • Infeed conveyor included – pit-fed steel slat conveyor with overhead feed section to the hopper • Bale discharge tray • Originally installed by RCP Recycling Systems, Telford • CE marked • Already removed and ready for loading at our Wymeswold site, Leicestershire A 1999 Macpresse MAC 111 automatic channel baler, sold with its infeed conveyor. The MAC 111 is a heavy-duty Italian-built baler for high-volume baling of cardboard (OCC), mixed paper, plastics and other recyclables, with a large 1,150 × 1,100 mm channel and twin 55 kW pump motors. The baler and conveyor have already been taken out, so there is no dismantling for the buyer to arrange. Photos were t ...
Baler Macpresse MAC 105, press force 70 t, year 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of Make: 2011 Hours: 23130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Filling opening: 1500 x 750 mm Bale chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Binding: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Funnel Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. ...
Technical data Maximum pressure: 75 tons Year of manufacture: 2014 Loading opening: 1816 x 1036 mm Number of bindings: 4 horizontal Channel cross-section: 1100 x 1100 mm Oil tank: 1300l Power connection: 45 kW Weight: approx. 20 tons The press is equipped with a PET bottle perforator.
MACPRESSE EUROPA, Mod.MAC 105,, suitable for pressing plastics and paper scraps, Main pump motor power: kw 45, Back pressure pump motor power: kw 2.2, Cooling pump motor power: kw 2.2, Needle motor power: kw 4, Thread-cutter motor power: kw 2.2, Thread-turning motor power: kw 1.5, Main pump: double vane pump, Flow rate low pressure pump P1: 1/min 204, High pressure pump capacity P2: 1/min 105, Maximum pressure: bar 250 working; 275 maximum, Back pressure pump: gear pump, Flow rate: 1/min 12, Maximum pressure: bar 100, Cooling pump: gear pump, Flow rate: 1/min 60, Thrust force at trolley: ton 70, Specific pressure at trolley: Kg/cm² 8, No load cycles: no. 6, Hydraulic oil tank capacity: l 1300, Weight without oil: kg 20,000, Specific weight of base on ground: Kg/cm² 1, Binding wires: no. 5, Bale dimensions: L X H 1100 mm x 800 mm, This machine is new, tested but never used., possible dr ...