other machinery for waste disposal and recycling used for sale

Westeria AirStar 1000 air classifier, built in 2022, new and unused Specifications: Manufacturer: Westeria Type: AirStar 1000 L2 – 20° Year of Make: 2022 Hours: 0 Connection: 460 V / 60 Hz Throughput: 80-100 m³/h Working width: 1000 mm Length of lightweight chamber: 2970 mm Belt width: 1000 mm Effective width: 822 mm Dimensions: 8869 x 2005 x 2000 mm (LxWxH) Inclusive - Extension of the lightweight chamber L2 - 20° bend - Wiring on terminal box - AirWheel 15 - AirJet Areas of application: Separation of heavy and light goods. Typical areas of application in the recycling / waste management industry include the treatment of household waste, MSW, commercial waste, e.g. for the production of substitute fuels or for pre-sorting for recycling. Note: The machine is in very good, mint condition. It was never used. No controls available. The complete documentat ...

HDPE Film Washer Year of construction 2016 0 operating hours (never went into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim composed of: Wet granulator type SM 450/600-S5-2 Friction washer / friction separator type FW 560/3000 Transport screw Separation tank (float-sink separation) type TB 500 mechanical dryer type TM 1005 Extraction system type MFT 55/500 Fine Material Separator Type HS 500 E-circuit

The HERBOLD plastcompactor is a system for the agglomeration of films, fibres, chips, dust and flakes. Poorly free-flowing waste is turned into an agglomerate with a high bulk density and good flowability, which can therefore be applied directly to extruders and injection moulding machines. The plant for sale has a main motor with 110 kw drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA, and bioplastics can be agglomerated without thermal damage or discoloration. The system consists of the feeding device with silo, the compactor, a re-cutting mill with sifting and fine material return On request, a pre-shredding can be offered that is adapted to the task Tests can be carried out in our technical center for suitability tests and sampling. We are the manufacturer of this  ...

Dry cleaner/ friction cleaner with 110 kW drive power. Throughput approx. 1 -2.5 t/h depending on type of plastic and material thickness

Friction scrubber with stainless steel housing and stainless steel rotor. Drive motor 22 kW

Capacity: 56 cbm bolted segment construction with discharge chute with sturdy steel construction

Capacity: 15 cbm with dosing belt new control box Steel skid frame with approach plate

With upstream feed conveyor belt Working width 1000 mm Drive 11 kW

Steep screw conveyor, screw tube stainless steel Brand new screw helix normal steel, brand new bearing with stuffing screw With drainage area, sieve approx. 2.5 mm perforation Motor 4,00 kW, 53 rpm Screw helix diameter 560 mm, length 7540 mm, clear length of screw tube 7570 mm Infeed 900 long x 740 mm wide Outlet 400 mm diameter Previously used for shredded plastic waste

- Oil extraction unit KAISER, 100-400 l/min - Screening belt, belt width: 800 mm, length: 2,000 mm, SEW-Eurodrive 0.37 kW - Monopump NETZSCH NM045BT, YOC 2001, GETRIEBEBAU NORD Gear Motor - Rotor of progressing cavity pump - Peristaltic pump DEPA ELRO ME5 - Gate valve, length: 275 mm, Ø 200/80 mm (outside/inside) - Control cabinet - 2 x agitators - 2 x stainless steel pipe with branch (approx. 1 m long)

Horizontal conveyor belt Axle distance: 5000mm Belt width: 1500mm Speed: 0.015 m/s Belt quality: smooth EP 400/3 Grid frame construction Colour: RAL 5015 Drive 1.1 kW Side guides with PVC thickening

6 spiral augers, total volume: approx. 55 cbm, capacity: approx. 150 cbm/h, drive 3 x 11 kW

4 used LTG KENYA dust and fiber separators and compactors, year 1995, each composed composed of: centrifugal fan (radial blades) dust suction ventilator, motor with 11 kW power, blade diameter 800 mm cyclone centrifugal dust separator (Vortex) type ZSC 200, for air volume up to 2000 m3/h LTG compacting power screw (CPS), screw diameter 110 mm, motor with 0,75 kW power dust quantity up to 100 Kg/h

Air-separator for hard material, drum diameter x width: 1,400 x 1,200 mm, feeder 1,000 x 1,500 mm with vibrator, blower with approximately 7,000 cbm flow, including steel-frame, machine is to separate heavy material from light one

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

mechanical dryer drive 90 kW BRAND NEW MACHINE centrifugaldryer for surface drying of the material fraction primarily for film flakes, granulate from PET bottles and other rigid types of plastics.

Work surface: 1,400 x 5,000 mm, stainless steel lining, drive 2 x 2.2 kW

A Dixi cardboard baling press is available. Pressing force: 180kN, cycle time: 22s, pressing time: 12s, filling opening X/Y: 1070mm/620mm, filling opening height: 980mm, bale dimensions X/Y/Z: approx. 1100mm/700mm/700mm-800mm, max. bale weight: approx. 120kg-180kg, machine dimensions X/Y/Z: approx. 1550mm/950mm/2000mm, weight: approx. 850kg. On-site inspection is possible.

Technical data feeding conveyor belt:Manufacturer BollegraafTyp HBT 1216/2000 18000Year of construction 2015Driving motor 5,5 kWLength feeding conveyor 18,000 mmGrade 0°Effecting width 2,000 mmHeight of side wall feeding conv. 500 mmTransport dimensions 18,000 x 3,200 (2,830 mm without motor and gear) x 1,200 mm l x w x hWeight approx. 13 tComments:Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

fire: Steinert, status: Used, refurbished,, Year of construction: 2012, Conveyor belt speed: 1.0 to 2.5 m/s, Drive motor conveyor belt: 2,2 kW, Protection class motor conveyor belt: IP 55, Drive motor pole system: 4,0 kW, grain size: 4 to 100 mm, Feed width: 950 mm, balancing motor: 2 x 0.8 kW, Automatic operation: Yes, Total weight: approx. 2540 kg